Used Sokkia C320 for sale (50)

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A Fsdowf Rgrspfx Al Asgh --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: excellent (used), Here we offer you a chamber dryer. External dimensions approx.: Width: 1,885 mm Depth: 1,200 mm Height: 2,425 mm Internal dimensions approx.: Width: 1,030 mm Depth: 1,000 mm Height: 2,100 mm Internal volume: 2.2 m³ Rated temperature: 100 °C Operating temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating power: 20 kW Air circulation rate: 4,500 m³/h / 400 Pa Motor power: 1.1 kW Protection class: IP 54 The chamber heating oven must not be used for flammable or explosive materials. The chamber heating oven must not be installed in an explosion-proof area. Continuous chain conveying system External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm Carrier bars: 13 pieces Pitch: 228 mm Carrier bar width: 354 mm Carrier bar depth: 320 mm Usable height: 135 mm Drive motor power: 0.25 kW at 189 Nm Transport speed: average 5 m/min. Load capacity/carrier bar: max. 10 kg Total load capacity: max. 130 kg Total weight when loaded: max. 730 kg Year of manufacture: 2005 Type: Ke/SO Condition: used Scope of delivery: (See picture) Fedpfx Aszdzixsl Asgh (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), Wild Heerbrugg MDG 17 Type S Leica DFC320 High End Microscope Camera With PC and software Microscope: Manufacturer: Wild Heerbrugg Type: MDG 17 Type S Camera: Manufacturer: Leica Fsdpfxsvwlitj Al Asgh Type: DFC 320 You are welcome to come by for a viewing. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article can occur and are reserved.

Condition: used, Surface and thickness planer Scheppach HMC3200, year of manufacture 1993, in good condition, 2.9 kW, 320 mm table width, 1380 mm table length, 150 kg Price changes reserved, subject to errors and typographical mistakes. Fjdpfex H Ugxox Al Asgh

Condition: used, Year of construction: 2007, x-travel 620 mm y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min power capacity 6,0 kW quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- - electrical hand wheel - Horizontal milling spindle - Coolant equipment Fsdpsyq Sv Defx Al Aogh

Condition: used, Year of construction: 1990, x-travel 500 mm y-travel 300 mm z-travel 350 mm Fjdpfxot Hwy Es Al Asgh total power requirement 12 kW weight of the machine ca. 3800 kg dimensions of the machine ca. m

Condition: ready for operation (used), Siemens 6SL3040-1NB00-0AA0 Numeric Control Extension NX15.3 SN T-C32072198 Version A, used, in good condition, fully functional, delivery as shown in photos. Fsdpfjx Euy Nox Al Aegh

Condition: new, Bernardo Panel Saw Classic 3200 C The Classic 3200 C panel saw with tilting saw blade meets all the requirements of modern workshops and is the ideal machine for cost-conscious small and medium-sized enterprises. Both the robust design and the generous dimensions of the machine ensure optimal working conditions for cutting solid timber or large panels; even decorative panels can be processed effortlessly using the standard scorer unit. Features • Aluminum sliding table with hardened guide rails • Standard table extension and table widening for handling larger panels • Stable outrigger table allows processing of large and heavy sheets without additional assistance • Powerful drive motor ensures optimal cutting performance even during extended operations • User-friendly degree scale directly readable from the handwheel • Scoring unit with independent drive included as standard • Extendable telescopic fence (up to 3100 mm), mountable on the outrigger table front and back • Rigid saw unit guarantees vibration-free and precise operation • Machine body constructed from torsion-resistant steel and cast iron combination • Hinged rip fence with robust 40 mm round bar guide Technical Specifications Table size: 935 x 620 mm Sliding table: 3200 x 370 mm Crosscut length: 3200 mm Max. saw blade diameter: 315 x 30 mm Max. cutting height 90° / 45°: 90 / 65 mm Cutting width at rip fence: 1295 mm Table height: 850 mm Table extension: 600 x 615 mm Table widening: 900 x 600 mm Fedpfx Aljywxrgo Aogh Outrigger table with roller: 1210 x 860 mm Main saw blade speed: 4000 / 6000 rpm Scoring saw blade speed: 8000 rpm Scoring saw blade: 120 x 20 mm Extraction port diameter: 100 mm Motor output S1 100%: 4.0 kW (5.5 HP) Motor input S6 40%: 5.5 kW (7.5 HP) Scoring motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3445 x 3560 x 1570 mm Weight: approx. 710 kg Scope of Delivery • Saw blade guard with infeed roller • Mitre fence • Crosscut shoe • Table widening • Extendable telescopic fence • Longitudinal fence stops • Outrigger table with roller • Push stick • Scoring unit with independent motor • Operating tools

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6214330001, overall weight: 89 kg, total height: 950 mm, power: 2.2 kW (2.99 HP), pressure (max.): 8 bar, noise level: 60 dB, new oil-free DENTAL piston compressor Dr Sonic 320-50-W-ES with attached double column adsorption dryer with sound insulation box and additional fan Fgodevlw Haopfx Al Ash Oil-free piston compressor, two-cylinder, single-stage, max pressure 8 bar, built on 50 lt. internally coated tank with attached adsorption dryer. Ideal for 3 dental chairs – minimal space requirement due to compact design. Specifications: Type : Dr. SONIC 320-50-W-ES-3M Operating overpressure max : 8 bar Suction capacity : 320 l/min Effective delivery rate at 6 bar*) : 210 l/min Number of steps : 1 Number of cylinders : 2 Compressor speed : 1400 1/min Nominal power drive motor : 2,2 Motor protection class / insulation class : IP 54 / F Operating voltage / frequency : 230 /50 V/Hz Sound pressure level (DIN 45635 T13) : 60 dB(A) Tank volume : 50 litres Width : 700 mm Depth : 500 mm Height : 980 mm Weight : 89 kg Compressed air connection : G 3/8

Condition: excellent (used), V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 10 grooves, unused -V-belt width: 22 mm -Taper bushing recording: Ø 100 x 100 mm (can be changed) -Dimension: Ø325 x 265 mm -Weight: 66 kg Fgjdpfxsm T Ahlo Al Ash

Condition: good (used), Level limit switch, level measuring device, sensor, switch, level transmitter, limit level detector, limit switch, level switch, level sensor, level evaluation unit, level indicator -Manufacturer: Endress+Hauser, level indicator unit, original packaging -Type: Silometer FMC 320 -Item No.: 922496-0500 Fsdpfx Alezmuqne Aogh -Voltage: 220 V -Cardboard dimensions: 125/90/H80 mm -Weight: 0.5 kg

Condition: used, V-belt pulley, belt pulley -V-belt pulley: Pulley 9 grooves -V-belt width: 22 mm Fgedpfom T Ah Nex Al Ash -Intake: Ø100 x 210 mm -Dimension: Ø325 x 240 mm -Weight: 62 kg

Condition: used, V-belt pulley, belt pulley -V-belt pulley: Pulley 14 grooves Fodpfx Aem At Imjl Ajgh -V-belt width: 22 mm -Intake: Ø110 x 250 mm -Dimension: Ø325 x 365 mm -Weight: 88 kg

Condition: new, functionality: fully functional, input voltage: 400 V, cutting height (max.): 90 mm, cutting width (max.): 3,200 mm, rotational speed (max.): 6,000 rpm, overall weight: 710 kg, Equipment: CE marking, saw blade guard, Rod guideways – a solution previously found only in top-tier machines, now available as standard Slide table made of aluminum equipped with hardened guideways ensures smooth and precise movement Table extension and widening as standard – ideal for supporting large sheet formats Robust support table enables processing of heavy and large panels without the need for additional support Powerful drive motor guarantees maximum cutting performance, even during intensive continuous operation Easy angle reading set directly on the handwheel – comfort and precision in adjustment Scoring unit with independent motor included as standard Extendable telescopic stop (up to 3100 mm), mountable at the front or rear of the support table – flexibility and convenient handling Stable saw unit ensures precise, clean cuts without vibration Machine body with reinforced, stable design made of steel and grey cast iron combination – ensures durability, rigidity, and precise operation even under heavy load. Parallel fence with a robust, round 40 mm guideway – the tilting option makes material loading easier Workspace – minimum required floor area is 5 × 6 m Technical specifications Table size – length: 935 mm Table size – width: 620 mm Sliding table length – panel/roller: 3200 mm Sliding table width – panel/roller: 370 mm Sliding table, carriage type: Panel Edge trimming length / table movement: 3200 mm Blade size: 315 x 30 mm Fgjdpfeyt I Arsx Al Ash Max. cutting height 90°: 90 mm Max. cutting height 45°: 65 mm Cutting width with guide: 1295 mm Working height: 850 mm Table extension: 600 x 615 mm Table widening: 900 x 600 mm Extension table: 1210 x 860 mm Main saw rotation speed: 4000 / 6000 rpm Scoring saw rotation speed: 8000 rpm Scoring saw size: 120 x 20 mm Extraction port Ø: 100 mm Motor power: 5.5 kW Motor power S1 100%: 4 kW Scoring unit motor power: 0.75 kW Voltage: 400 V Dimensions – width: 3445 mm Dimensions – depth: 3560 mm Dimensions – height: 1570 mm Weight approx.: 710 kg

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables Fgedsd Rg Dpepfx Al Aeh N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: new, Semi-automatic metal bandsaw with high cutting accuracy. This machine allows for stepless 90° cuts, as well as miter cuts, from left 45° to right 30°. (Swivel range: left 45° and right 60°) Standard equipment: - Large, rotatable support table – wear-free! (The saw blade channel rotates during miter cuts) - Belt tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via a short-stroke cylinder - Height limitation of the saw frame via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – pipe) - Lowering of the saw arm via a hydraulic cylinder; stepless adjustment - Easy, manual movement of the clamping bar R/L - Electrical belt tension monitoring with saw blade breakage detection - Coolant pump with dual feed to the saw blade guides - Carbide saw blade guides and guide rollers - Bi-metal saw blade M 42 - Chip brush Technical data: ● Cutting range: 90° round 250 mm / flat 320 x 235 mm / square 235 x 235 mm 45° L round 220 mm / flat 230 x 210 mm / square 210 x 210 mm 45° R round 180 mm / flat 205 x 160 mm / square 160 x 160 mm Fodpfx Aoctgkzjl Aegh 30° R round 130 mm / flat 130 x 105 mm / square 105 x 105 mm ● Drive power: 1.5 kW // 400 V // 50 Hz ● Total connected load: 3.35 kVA ● Belt speed: 20-120 m/min, stepless ● Saw blade dimensions: 2910 x 27 x 0.9 mm ● Remaining piece length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1480 x 2000 mm ● Weight: 410 kg Price on request!

Condition: used, functionality: unexamined, Ferwood Code: RU0011674 - Manufacturer Code: MC 320P2T - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service, please contact us. 4KG - 36X26X21 Fodpfxjyb R Sxo Al Aogh

Condition: ready for operation (used), ALSTHOM LC320TE R0530 Brushless servo motor. Serial number: 11310 + Heidenhain ROD428B.011 2000 rotary encoder. Part number: 258 197 05, serial number: 3985310, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fodpfei D Ewtex Al Aegh

Condition: new, sheet length: 3.200sheet thickness: 16cutting area width: 3200total power requirements: 22weight approx.: 10600messurements (LxWxH): 3800 x 1950 x 2080 Fsdpfjvap Tnjx Al Aogh Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 3.200sheet thickness: 10cutting area width: 3200total power requirements: 15weight approx.: 7700messurements (LxWxH): 3800 x 1820 x 1920 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Fgjdpfx Aovap Thsl Ash Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 5100messurements (LxWxH): 3800 x 1750 x 1700 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Fgodpfx Aovap Tusl Ash Auto-cutting (Flying cut)

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada Fgodpfxszdwfie Al Ash CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Fgodpfx Ajwnz Apjl Aoh Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Condition: excellent (used), Plummer block housings, bearing blocks -Condition: unused Fgodpfxeb A H Rze Al Ash -Quantity: 4 pieces bearing block with bearing -Type bearing block: NTN 320 - Bearing type: UC320 -with shaft seal -Bearing: Ø 100 mm -Number: 4x available in storage -Price: per piece -Package dimensions: 550/340/H240 mm -Weight: 43 kg

Year of construction: 1990, condition: used, table mounting size: 700 x 1200 mm movements x/y/z: 600/300/350 mm spindle taper: SK 40 ISA min./max. distance table/spindle: 150/540 mm spindle turning speed range: 45 - 6000 rpm number of tool positions: 12 pieces carriages: 5000 - 20000 mm/min rapid move: 5000 - 20000 m/min spindle drive: 5,5 kW Fsdpfx Aljda S Nvo Ajgh electrical connection: 380 V, 12 kVA kW space needed: 2350 x 2100 x 2500 mm weight: 3800 kg