Used Single Chill Plus Testing Cht-130 for sale (27,248)

Condition: excellent (used), For sale: a SEW-Eurodrive WA20DT63L4/B03 worm gear motor with a 0.25 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. It shows normal signs of use, as visible in the photos. A power cable with a plug is included. Technical specifications: Manufacturer: SEW-Eurodrive Model: WA20DT63L4/B03 Motor power: 0.25 kW Power supply: 3× 230/400 V, 50 Hz Motor speed: 1300 rpm Bodpfxszmy Sdj Amrsln Output speed: 130 rpm Gear ratio: i = 10.25 Output torque: 16 Nm Protection class: IP54 Insulation class: B Operating mode: S1 Brake: 230 V AC Weight: 10.55 kg Manufacturer: SEW-Eurodrive, Germany The scope of sale includes exactly what is shown in the photos.

Condition: ready for operation (used), Heidenhain UV 130 ID 324 998-01 SN:7840727D – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as breakage, as these cannot be repaired. In this case, an additional charge of €400, including VAT, will be applied. Bodpfez Hib Sjx Amroln Attention: You are bidding on a Heidenhain UV 130 ID 324 998-01 SN:7840727D inverter for exchange (exchange service). It has been professionally completely overhauled and tested and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €400, including VAT, will be issued.

Condition: ready for operation (used), Heidenhain UV 130 ID 324 998-01, serial number: 7840727D – including test report, used, in good condition, 100% functional, scope of delivery as shown in the photos, professionally and completely refurbished and tested, with a 3-month warranty, 100% functional, scope of delivery as shown in the photos. Blodpfx Asz Hib Eomrjn

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00709, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/45M manufactured in 2025.04. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.04 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Bledpfoz Hywkex Amrjn Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00707, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/45M manufactured in 2025.09. The robot comes with an R-30iB Plus A-size controller including iPendant. Blodpez Hywwjfx Amrjn   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.09 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.09 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00708, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/45M manufactured in 2025.06. The robot comes with an R-30iB Plus A-size controller including iPendant. Blodpfx Amjz Hywqerjn   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.06 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.06 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Year of construction: 2011, operating hours: 34,000 h, condition: used, functionality: fully functional, We have one dual temperature control unit from Single for sale. The original purchase price was approximately €5,100. Bsdpfx Aozbx Rpsmrsln Medium: Water Reinforced pump Heating capacity: 9 kW per unit Cooling capacity: 20 kW per unit Mobile Interface: 20 mA PT 100 sensor Flow measurement Alarm

Condition: repair required (used), Year of construction: 2008, operating hours: 25,000 h, functionality: not functional, machine/vehicle number: 191-65, workpiece length (max.): 400 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 350 mm, overall weight: 8,700 kg, spindle speed (max.): 20,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 2008 CHIRON FZ 15KS High Speed Plus 5-axis vertical machining center with Heidenhain CNC control. Machine weight approximately 8,700 kg. Chip conveyor included. Blodpfxoz Hmb Aj Amren The spindle is defective and has been removed. The spindle and available related components are stored in wooden crate and are included in sale. The spindle requires repair,rebuilding. The machine is sold as-is and where-is. Inspection is available in Ankara,TURKEY. Asking price: EUR 30.500, negotiable. EXW Ankara.

Condition: used, Year of construction: 2015, functionality: fully functional, pressing force: 55 t, filling opening width: 1,195 mm, filling opening length: 650 mm, bale length: 780 mm, bale width: 1,100 mm, bale height: 1,200 mm, bale weight: 400 kg, total width: 1,800 mm, total height: 2,985 mm, total length: 1,200 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,080 kg, input frequency: 50 Hz, HSM V-Press 860 Plus Vertical Baler – Year of Manufacture 2015 Used HSM V-Press 860 Plus vertical baler for the economical compaction of cardboard, paper, and film. Technical Data: Manufacturer: HSM Model: V-Press 860 Plus Bledpfjz Ht Ngex Amrjn Year of Manufacture: 2015 Pressing force: 548 kN (approx. 55.9 tons) Drive power: 4 kW Power connection: 400 V / 50 Hz Bale dimensions: approx. 1,200 x 1,100 x 780 mm Bale weight: up to approx. 400 kg, depending on the material Feed opening: approx. 1,195 x 650 mm Machine weight: approx. 2,080 kg Dimensions: approx. 1,800 x 1,200 x 2,985 mm (W x D x H) Suitable for the compaction of cardboard, paper, and film. The high pressing force ensures a significant reduction in the volume of the material. Inspection possible by arrangement. All information without guarantee. Subject to prior sale.

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Bjdoxv Ayvspfx Amreln Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Condition: excellent (used), Year of construction: 2020, operating hours: 41 h, functionality: fully functional, Baling press HSM V-Press 825 Plus Pro Year of manufacture: 2020 Operating hours: 41 hours Bale counter: 145 bales Machine is fully functional, inspected, and maintained. Technical data: Width x Depth x Height: 1700 x 1248 x 2370 mm Bale length x Bale width x Bale height: 1200 x 780 x 700 mm Bsdpsz H Saqofx Amrjln Width x Height of the feed opening: 1195 x 540 mm Weight: 1210 kg Type of consumable material: Strapping band Material to be baled: Film, mixed paper, cardboard, stamping waste, clothing Pressing force: 250 kN Voltage: 400 V / 50 Hz Power: 4.0 kW Rated current: 9.0 AMP

Condition: like new (used), Year of construction: 2023, operating hours: 268 h, functionality: fully functional, controller manufacturer: Siemens Sinumerik one, total height: 2,900 mm, total length: 3,000 mm, total width: 2,700 mm, table width: 550 mm, table height: 510 mm, table length: 550 mm, overall weight: 5,600 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 485 h, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, DMG MORI IoTconnector and NETservice Chip conveyor Renishaw probing kit Coolant spray gun Job Shop package for SIEMENS SINUMERIK ONE Tropical package Option includes: • Active cooling unit for the control cabinet Bljdpfxjz E U A Es Amrjn • Additional fan in the operator panel Recommended for ambient temperatures from 35°C up to a maximum of 45°C Tool holder for SK40 DIN69871 Tool holder SK 40 for pull stud DIN 69872 Electronic handwheel External electronic handwheel Software option: DXF import Software option - DXF Import Allows opening DXF files directly on the controller to extract contours and import them into the program. RMS device (Relocation Machine Security) Documentation - 1, German Screen display, German/English

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Type: FXP57S WF Constr. year: 2016 diameter range: 8,5-22 mm number of dies: 7 number of stations: 8 cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 press power: 200(126) to max. outside dia. of round pie: 42 mm stroke: 150 mm Bljdpfjwi Sulex Amren Location: In our warehouse

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm working feed 5 - 15 mm/sec speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking Bodpfeyfwxtjx Amroln

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, L&Z Lathe KMUTH BASIC Plus incl. 3-axis digital display - Year of manufacture 2011 - CE marking - Three-axis digital display - Center height 150mm - Max. turning diameter 300mm Blsdsz Hwx Eepfx Amron - Max. turning diameter over support 178mm - Max. turning diameter without bridge 430mm - Center distance 810mm - Spindle bore 38mm - Spindle speeds (geared) 60 - 1550 rpm (9 steps) - Automatic longitudinal / facing feeds - Spindle mount - Camlock D1 - 4" - Tailstock taper MK 3 - Quill travel 100mm - Bed width 180mm - Multifix base with insert - Electric chuck guard - Work light - Coaxial center - 3-jaw chuck - 2 x steady rests - Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 550 kg Errors and omissions excepted.

Condition: used, Saddle Stitcher Müller Martini Bravo Plus Amrys Sammelhefter / Saddle Stitcher Müller Martini Bravo Plus Amrys Year 2007 - SN. MMZO 1 306 445 – Working hours 7.100Std./h PLC Steuerung mit Display - Geschwindigkeit max. 14.000 cyc./h. Size (untrimmed) max. 320 x 480mm - (trimmed) min. 105 x 148mm - Product thickness max. 5mm 6 Feeder Type 0370.0458 - SN. MMZO 1 306 445 Umschlaganleger / Cover Feeder Type 1529.0416 - SN. NN35997/ZO1306447 Doppelbogen/Dickenkontrolle / Semko Thickness Control Type 0333.0435 Heftstation / Stitching unit Bravo Plus Typ 0380.0450 - SN. MMZO 1 306 445 Dreischneider / Three Knife Trimmer 0449.0435 - SN. MMZ0 1 306 445 Blsdjz H A D Hopfx Amrjn Bandauslage / Band Delivery Müller Martini 1564.0400 Manuals all included Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,000 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, rotational speed (max.): 5,000 rpm, workpiece weight (max.): 6,000 kg, ANAYAK VH 3000 Plus bed milling machine for sale. The machine is fully functional and can be inspected while in operation. Functional videos are also available upon request. It was mainly used for machining aluminum and plastic (tool and fixture construction). Very smooth operation and excellent dimensional accuracy! - Year of manufacture: 2005 - Spindle hours: 42,000 - Manufacturer: Anayak - Model: VH 3000 Plus - X-axis: 3000 mm - Y-axis: 1700 mm - Z-axis: 1500 mm - Max. spindle speed: 5000 rpm - Table length: 3200 mm - Table width: 1100 mm - Table load: 6000 kg - Spindle taper: ISO 50 Bedpfoz Ig Npjx Amrjln - Spindle motor power: 22 kW Disassembly and loading can be arranged for an additional charge. Please do not hesitate to contact us if you have any questions.

Condition: used, Year of construction: 2004, functionality: fully functional, total width: 1,047 mm, total length: 1,850 mm, total height: 3,079 mm, pressing force: 59 t, overall weight: 2,300 kg, input voltage: 400 V, input frequency: 50 Hz, bale height: 1,100 mm, bale length: 1,200 mm, bale weight: 500 kg, bale width: 730 mm, filling opening length: 600 mm, filling opening width: 1,190 mm, type of input current: three-phase, Strautmann PP 1207 Plus Baler – Year of manufacture 2004 Bsdpfoz Ht Ezsx Amrjln Used vertical baler, Strautmann PP 1207 Plus, for the efficient compaction of cardboard, paper, film and other suitable recyclable materials. Technical data: Manufacturer: Strautmann Model: PP 1207 Plus Year of manufacture: 2004 Pressing force: 580 kN / approx. 59 tons Motor power: 4 kW Power supply: 400 V / 50 Hz Bale dimensions: approx. 1,200 x 1,100 x 730 mm Bale weight: approx. 400–500 kg, depending on the material Feed opening: approx. 1,190 x 600 mm Machine weight: approx. 2,300 kg Dimensions: approx. 1,850 x 1,047 x 3,079 mm (L x W x H) Transport height: approx. 2,170 mm Noise level: below 80 dB(A) The machine is suitable for volume reduction and compaction of cardboard, paper and film. For transport, the machine can be partially disassembled. The hydraulic ram must then be reassembled professionally. Inspection possible by appointment. All information without guarantee. Subject to prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle motor power: 15 W, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 8,000 rpm, rotational speed (min.): 20 rpm, type of input current: three-phase, workpiece weight (max.): 600 kg, total height: 2,841 mm, total length: 3,363 mm, total width: 2,812 mm, overall weight: 6,850 kg, Equipment: documentation/manual, rotational speed infinitely variable, CNC Vertical Machining Center VICTOR F106, Fanuc Oi MS Plus, 4th axis, chip evacuation system Fanuc Oi MS Plus control, 10.4” Type 3 color graphic display, manual guide I, AICC-2. Serial, USB, and Ethernet ports. Bsdpfx Amez Hc Acsrjln - Spindle cooler with refrigeration unit - De-oiler - Lateral left chip evacuation system complete with chip conveyor - 4th axis rotary table, Golden Sun model CNC-250R 250mm diameter rotary table, complete with automatic tailstock with manual movement, drive, motor, and wiring. Travels X-axis: 1060 mm Y-axis: 600 mm Z-axis: 560 mm Spindle nose to table surface distance: 150-710 mm Column to spindle axis distance: 627 mm Table Table dimensions: 520 x 1120 mm Maximum load capacity: 600 Kg T-slot dimensions: 5 x 18 x 100 mm Spindle Maximum speed: 8000 (optional 10000) rpm Spindle taper: BT-40 Spindle motor power: 11-15 kW Axes Rapid traverse rates X - Y - Z: 32 m/min Axis servomotors: 2.5 - 3 kW Tool changer Number of positions: 24 Through-spindle coolant with single MAHLE filter + high pressure 20 bar Linear guides with roller recirculation Dimensions and Weight Width: 2812 mm Height: 2841 mm Length: 3363 mm Weight: 6850 kg Price: 61,500.00 € + VAT

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 1572, functionality: fully functional, operating hours: 5,500 h, power: 55 kW (74.78 HP), cutting height (max.): 1,000 mm, cutting width (max.): 1,200 mm, control type: PLC-controlled, overall weight: 20,000 kg, Complete Mebor wood sawing line Included: - HTZ 1200 Plus, maximum sawing length 9m, Optifast 10 control system - multi-blade VR 900 with 3 movable heads Bjdez Eadbjpfx Amrsln - MLD Logdeck log loader - 2x RCM 800 with left/right sorting - 2x CCP transport chains All in good condition, available for inspection in working order.

Condition: excellent (used), Year of construction: 2024, 259 USED Arabic Bread Line, Oven Line: TECHNICAL DATA: - capacity: 3500-9000 pieces/h, - diameter: 15-38 cm, - number of rows: max. 3, - working width: 100 cm. - year of manufacture: 2024. EQUIPMENT: - divider, Bljdpfozix Amox Amrsn - pre-proofer, - rolling, - final proofer, - tunnel oven + 2 burners, - cooling conveyor: 80 m, - stacker (folding and counting devices). The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: single, temperature controller Digitemp Q -Type: TQD 3110 D -Measuring range: 0 to 399 °C -Dimensions box: 220/130/H135 mm Bljdpfx Ameudqbisrjn -Weight: 0.8 kg

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Blsdpoy Su Efefx Amren

Condition: good (used), Technical data for the pallet racking crossbar: Racking system: Stow Type: Pal Rack OP Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: blue Box profile: 110 x 50 mm Clear width: 1,300 mm Maximum load per crossbar pair: 2,000 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately Bodpfxshlhfge Amrjln depending on the delivery location or scope of delivery.

Condition: excellent (used), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional mechanical ventilation device used in ambulances, medical transport, emergency rooms (ER), intensive care units (ICU), and by rescue services. The device powers on and operates correctly; the display is clear, with visible menus and parameters. Good visual condition with normal signs of use appropriate for its age (see photos). The equipment is sourced from the German market. Data and Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / Air) • Includes transport bags • Includes hoses and mounting bracket • CE marking, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes for emergency care • Adjustable parameters: Vt, frequency, FiO₂, PEEP, etc. • Clear display with parameter overview • Safety alarms Technical condition: • Used device • Fully functional – turns on and responds to settings Blsdpox N Icxjfx Amren • No current calibration certificate (certification to be arranged by buyer if required) Legal notice: Medical equipment – intended for use by qualified personnel only. Perfect for private ambulances, medical transport companies, training purposes, military, offshore operations, or as backup equipment.