Used Seho Goreflow 1.8 for sale (667)

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Rjdpjy Tiaaefx Amyecd Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: good (used), Karl Krause Hot stamping press Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. Extendable work table. Timer control allows the machine to be started at a specific time to ensure it is ready for operation. 380V power supply. Heating plate size: 400x530mm. Rsdpszlaalefx Amyjcd Weight: approx. 800kg.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, For sale: a boiler, a UNICONFORT brand water heater. Rjdpfxjzluz De Amyecd

Condition: new, We offer you a new pallet racking crossbar for sale here. Thanks to the hot-dip galvanized surface, these crossbars are suitable for outdoor use. Technical data for the pallet racking crossbar: Racking system: Lücht & Palm Type: MB Included in the scope of delivery: Rjdpehg Tkkjfx Amyjcd 01x Pallet racking crossbar, new Material color: hot-dip galvanized IPE profile: 120 x 60 mm Design: Head crossbar Agraffe: 2 HK (hooks) Clear width: 1,800 mm Maximum load per pair of crossbars: 3,600 kg, with evenly distributed load 1x Set HV fitting set EN14399-4 - EN14399-6 10.9 hexagon head bolt with nut and washer for HV connection Material color: hot-dip galvanized These crossbars have an upstand for the placement of shelf grids, which is welded on. (Height: 40 mm / Material thickness: 4 mm)

Condition: new, Technical data for the pallet racking traverse: Racking system: Stow Type: Pal Rack NS The scope of delivery includes: 01x pallet rack traverse, new Material color: Ral 2004 orange Box profile: 100 x 50 mm Beam type: PNB 0480 Bracket: 4 HK (hooks) Weight per unit: approx. 7.21 kg Clear width: approx. 1,825 mm Max. load per pair of traverses 2,000 kg with evenly distributed load 02x locking pins, new Redper Tk Sgofx Amyscd Version: completely galvanized For securing the longitudinal beams against unintentional lifting Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), We are offering for sale a used pallet racking upright from the manufacturer Polypal. Rjdsht Rq Ujpfx Amyecd Technical data for the pallet racking upright: Racking system: Polypal Type: Stockpal The scope of delivery includes: 01 x Pallet racking upright, used Material color: Sendzimir galvanized Profile dimensions: 85 x 63 x 2.00 mm Profile type: SKMO5220P Including cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted frame) 1,800 mm high 1,100 mm deep General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: new, The scope of delivery includes: 01x pallet rack traverse, new Material color: RAL2004 pure orange type of traverse: TB100x50 agraffe: 4 HK (hooks) clear width: 1.850 mm max. load per truss pair 2.650 kg, with evenly distributed load Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Rsdsnmyt Dopfx Amyecd

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" Rodscr U Uropfx Amyocd And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: new, functionality: fully functional, gearing type: other, fuel type: diesel, color: silver, emission class: none, mast type: other, brakes: other, suspension: other, Year of construction: 2026, Equipment: low noise, trailer coupling, TICAB HB 2 Asphalt Hot Box | Thermal Container for Hot Mix Transport With premium insulation and an advanced diesel heating system, it ensures consistent mix quality for superior patching, resurfacing, and pavement rehabilitation. Redjx Uqt Rjpfx Amyecd The TICAB HB 2 is a professional thermal hot box engineered to transport and hold hot mix asphalt at working temperature from the plant to the job site with minimal heat loss. Key Features High-efficiency thermal container with premium mineral wool insulation — heat retention up to 12 hours Beckett diesel heating system with automatic temperature control for stable mix temperature in cold weather Mountable on a truck body or trailer frame for flexible job-site mobility Heavy-duty construction for municipal roads, highways, parking lots, bike paths, driveways, and industrial areas Hydraulic lift unloading system and top loading hatch for fast loading and easy discharge Capacity: ~1.5–1.8 m³ (up to ~4 tons of hot asphalt) — ideal for medium to large repairs Applications Road and highway repair and maintenance Pothole patching and resurfacing Hot mix asphalt transport and thermal storage Pavement rehabilitation and paving preparation Supplying hot mix to asphalt pavers on site Why Choose the TICAB HB 2 Reliable temperature control, excellent insulation, and operator-friendly design make the HB 2 a dependable solution for contractors, paving companies, and municipalities that demand consistent hot mix quality and efficient road repair workflows. Contact us today for pricing, delivery options, warranty details, and full technical specifications. Ready for immediate deployment to boost your asphalt repair productivity.

Condition: used, Year of construction: 2015, operating hours: 1,800 h, power: 99 kW (134.60 HP), Equipment: air conditioning, all wheel drive, cabin, VAT can be shown: Net selling price: €72,500 Well-maintained Fendt 313 Vario / SCR with original 1,800 operating hours. Very good condition. 1800 hours First owner 19% VAT can be shown If you have any questions: Christian Hirsch Please try again later as we are often in a customer meeting. * Vario control * Multifunction joystick with cruise control, engine speed memory, automatic functions, hydraulic control * Varioterminal 7-A with button operation * Variotronic headland management system * Vario TMS tractor management system * Cabin * Air conditioning * One-piece windshield * Height and tilt adjustable steering column * Super comfort seat, air-suspended with backrest * Super comfort seat with seat heating * Co-driver's seat with automatic seatbelt * Particle filter (aerosol) * Segment windshield wiper at the front * Interior mirror * Work lights * Engine & transmission * Reversible shuttle function, stop-and-go function * All-wheel drive / differential locks * Comfort control for all-wheel drive / differential lock * Rear / front differential with 100% lamella lock and steering angle sensor * Load-sensing PTO shafts * Rear: Flange PTO shaft 540/540E/1,000 rpm * External control of the rear PTO shaft * Hydraulic system * Electro-hydraulic rear lift (EHR) * 1st and 2nd hydraulic valve at the rear * Hydraulic valve controls, cross lever, UDK couplings at the rear * Front weight 60kg * DL hydraulic system / 2-line system * Tow hitch, height-adjustable * Roof, white * Paintwork of superstructure in RAL color * Paintwork of rims on request * Heated rear window * Ventilation * Air conditioning * Super comfort seat, air-suspended * Floor mat, cabin * Steering wheel including rotary grip * Additional equipment bracket * Terminal bracket * Mirror bracket * Rear view mirror * Cabin suspension, mechanical * Work lights, roof front TWINPOWER * Work lights, fender * Work lights, roof rear TWINPOWER * VARIO TMS C267 * Rotating beacon * Color of superstructure RAL 1032 * Color of rims RAL 9006 White aluminum * 40 km/h version * PTO speed 540/540E/1,000 rpm * Rear PTO, single-acting, one valve, center right + rear * Additional valve, single-acting 1/2, rear * Additional valve, single-acting 1/3, rear * Return line, center right * Top link, category 2 (not included) * Fuel pre-filter, heated * Tires: 360/80 R24 138D NO 30 8 W12X24 * Tires: 440/80 R34 155D NO 112 8 DW15L * Tread depth ~90% * Front track 1820 mm * Rear track 1800 mm If you have any questions: Christian Hirsch Rcjdpfx Ajy I Hz Rsmysd If you have any questions: Christian Hirsch Please try again later as we are often in a customer meeting. Trailer available on request (see last photo, Swopper converter). More offers at: The equipment was determined with the help of a VIN query, errors may occur for technical reasons. Information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors / prior sale reserved.

Condition: new, Year of construction: 2026, machine/vehicle number: 20250605003, fuel type: diesel, motor manufacturer: 4012-46TAG3A, General information Field of application: Construction Weights Empty weight: 10.500 kg Functional Generator capacity: 1.880 kVA Dimensions of cargo space: 505 x 212 x 253 cm Redpfsx Eg Dwjx Amyjcd Other information Fuel consumption: 213 Liter / Hour at 75% load Generator: Leroy Somer LSA52.3S Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Water tank volume: 2000 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Tank

Condition: new, Year of construction: 2026, fuel type: diesel, power: 1,500 kW (2,039.43 HP), motor manufacturer: Perkins 4012-46TAG3A, General information Field of application: Construction Weights Empty weight: 11.207 kg Functional Generator capacity: 1.875 kVA Dimensions of cargo space: 526 x 219 x 245 cm CE mark: yes Other information Fuel consumption: 259.9 L/Hour at 75% Load Prime Generator: Leroy Somer LL9324F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Production country: CN Additional information Please contact Team DPX for more information Rcodpfsiziuujx Amyed = Additional options and accessories = - Battery - Control Panel - Tank

Condition: new, ABB robot IRB 2600 NEW, IRB 2600-12/1.85, IRC 5 Rcjdpfx Amjznkgbsysd Industrial robot 0 operating hours, original packaging from 10/2024

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, ABB Robotics IRB 2600-12/1.85 IRC M2004 robot, complete 1 x Serial number 2600-102039 1 x Serial number 2600-102040 Controller: IRC5 M2004 Number of axes: 6 Max. payload: 12kg Max. working range: 1850mm Year of manufacture: 12/2013 Scope of delivery: Robot, controller, cables, teach pendant, circuit diagrams Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Ex works / free loading. Rcodpszm Ikhjfx Amyed The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Price is per robot. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to abroad on request – please specify country, city and postcode. Freight costs on request – please specify delivery address.

Condition: used, Heftkopf / Stitching Head Müller Martini HK 75 Heftkopf / Stitching Head Müller Martini HK 75 0881.8101 Rsdpfxozdrtuj Amyocd Serial-No. ET029 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Heftkopf / Stitching Head Müller Martini HK 75 Rcedpfxezdrtne Amyjd Heftkopf / Stitching Head Müller Martini HK 75 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1998, operating hours: 8,240 h, lifting height: 5,550 mm, fuel type: electric, mast type: triplex, battery voltage: 48 V, fork length: 1,200 mm, Empty weight: 3.600 kg Lifting capacity: 1.800 kg Number of valves: 3 General condition: average Technical condition: average Rjdpfxsv D Eruo Amyocd Visual appearance: average EPA Marked: yes Fork carriage: Sideshifter Please contact Bas Sindorf for more information

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B Robot Full of options DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Redpfsxq Ttiox Amyjcd

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2021, operating hours: 1,879 h, Empty weight: 16.500 kg Please contact Emal Jaweed for more information Rcjdpfx Aoy Ivyvemyod

Condition: used, Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt Redpfx Amjclic Doyecd -Thickness: 5.0mm -Width: 100mm -Length: 21,800mm -endless -Number: 1x band available -Weight: 12kg

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: AWI Maschinenbau, heavy-duty transport wagon with 1-axle turntable steering -Type: PDV 3.0 To 1.8x7.5 m -Platform: 7615/1800/H1000 mm -maximum weight allowed: 3 t Rcsdpfeyhaxnjx Amyed -Tires: Solid rubber tires 415/100-305 -Overall dimensions: 9135/1860/H1000 mm -Transport dimensions: 7615/1860/H1000 mm -Weight: 860 kg

Condition: good (used), Electric motor, three-phase motor -Power: 0.8 kW -Speed: 1410 rpm -Shaft: Ø 18 mm -Construction: B5 Rsdpfx Amjcmmahjyecd -Protection class: IP 44 -Dimensions: 270/230/H200 mm -Weight: 16 kg

Condition: used, Year of construction: 2017, operating hours: 1,356 h, Equipment: all wheel drive, Skyjack SJ6832 RT 4x4 diesel-powered scissor lift with a working height of 11.8 meters! ---- * Manufacturer: Skyjack * Model: SJ 6832 RT * Year of manufacture: 2017 * Operating hours: approx. 1,356 * Working height: approx. 11.8 meters * Platform height: approx. 9.8 meters * Drive: 4x4 * Kubota diesel engine * Operating weight: approx. 3,770 kg * 4 x hydraulic outriggers * In good condition! * More photos and video available upon request (WhatsApp) * Price: EUR 8,900, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is provided without warranty. Errors and prior sale are reserved. Rodpjzkpyrjfx Amyecd

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: A935B07659U, Year of construction: 2020, operating hours: 8,451 h, load capacity: 1,800 kg, lifting height: 4,900 mm, free lift: 1,672 mm, fuel type: electric, mast type: triplex, construction height: 2,180 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 4,900 mm Free lift: 1,672 mm MACHINE DETAILS Rsdpfx Ajziy Ttomyscd Mast type: Triplex Fuel type: electric Battery voltage: 48 V Operating hours: 8,451 h Overall height: 2,180 mm EQUIPMENT Charger Side shifter 3rd valve External reference: SL19150SP

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB 2600-12/1.85 Type B +Trackmotion 2.9 meter,complete as new DTC 7 hours 2019 DEVELOPMENT OF GSG ROBOTICS Rcjdpjyl Avqefx Amyjd GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.