Used Sas Hks-E 6M Easy for sale (71,706)

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Bwjdpfx Amez Dvi Rsreu Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Bwedpfew I Ug Hsx Amrju Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. Bwodpfx Amsykubijrsu LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2014, condition: like new (used), functionality: fully functional, Jöni Easy 250 lit cooking vessel year of construction 2014. Electric tillable built in steam generator. Bwodpfoydpgajx Amrsu Fully driven by electrical power.

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces Bwedpfx Amozuzt Eerju - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMO MACHINE Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Vacuum table 1,020 x 1,500 mm Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Milling spindle HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Cooling with compressed air 6 bar 20 m/h Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Bodpfx Aezbybiomrowu Changer CH 6 S Condition: good Available: immediately Location: Delmenhorst

Condition: used, Year of construction: 1997, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min Bwjdpfx Asy I Dbbsmrsu back stop - adjustable 1000 mm Control DELEM DAC 360 oil volume 120 ltr. engine output 9.5 kW weight 7000 kg. range L-W-H 3950 x 1950 x 1680 mm well-maintained condition (!!) equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear - DELEM CNC control unit type DAC 360 * front control panel, swiveling front left - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale

Condition: good (used), Year of construction: 2008, pressing force: 300 t, control type: CNC control, actuation type: hydraulic, CNC crowning Hydraulic tool clamping EFL Easy Form laser measuring & correction system Set tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Bsdpfx Amswrza Ajrewu Height: 3800mm Weight: 23000kg

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis OTC Daihen EASY ARC V02.04 was manufactured in 2019. It features a robot working range with a radius of 1,445 mm and a maximum payload of 6 kg. The integrated welding table measures approximately 2,200 mm in width and 1,100 mm in depth, with a load capacity of around 1,000 kg. If you are looking to get high-quality welding capabilities, consider the OTC Daihen EASY ARC V02.04 welding robot we have for sale. Contact us for further details. - System Type: Mobile Robotic Welding Cell (EasyArc)- Robot Kinematics: 6-axis vertical articulated robot- Robot Payload: 6 kg (Max. upper arm load: 10 kg)- Robot Working Range (P-Point): Radius 1,445 mm- Robot Repeatability: ±0.08 mm (Path), ±0.2 mm (Point)- Robot Drive System: AC Servo Motor- Robot Weight: 145 kg- Welding Power Source Model: OTC Daihen Welbee Inverter P400 (MIG/MAG, Gas-cooled)- Power Source Mains Voltage: 3 x 400 V / 50 Hz (+/- 15%)- Power Source Rated Input Capacity: 18.2 kVA- Welding Current Range: 30 - 400 A- Welding Voltage Range: 12 - 34 V- Power Source Duty Cycle: 400 A at 30%- Robot Controller: OTC Daihen FD11 (Model: EAFDB6-S000, Rated Input: 3.1 kVA, Phases: 3, Voltage: 400 V, Freq: 50/60 Hz, Mass: 60 kg)- Safety Enclosure: Lightweight protective housing with setup and loading doors equipped with electric safety interlocking switches- Welding Table: Integrated hole-pattern welding plate table prepared for clamping elements (Dimensions: ~2,200 mm width x 1,100 mm depth, Weight: ~600 kg, Load Capacity: ~1,000 kg)- Table Mobility: Legs equipped with swivel guide rollers and locking brakes- Horizontal Rotary Positioner: OTC Positioner PB Type (Max. payload 250 kg, Rotation speed 26°/s, Torque 205 Nm, Repeatability ±0.1 mm, Weight 110 kg, central bore in flange plate for media feed-through)- Environmental Conditions: Operating temp 0-45 °C, Humidity 20-80% (non-condensing)- max. 100 operating hours- 1 electronic axis is defective and needs to be repaired Bwjdpfxoy T Iyfj Amrju

Condition: used, Year of construction: 1994, functionality: fully functional, Listing for Machineseeker – Used CEFLA Painting Line (Fully Operational) For sale is a complete, fully operational paint booth machine dismantled from a used production line. Manufacturer: CEFLA – premium industrial equipment for professional coating applications. System Components: 1 pc. belt conveyor • Length: approx. 1,900 mm • Belt width: 1,400 mm • Conveyor speed: 1.7 – 10.7 m/min 1 pc. CEFLA EASY 2000 automatic spraying machine Condition: Used, fully functional Regularly serviced Immediately ready for use Field of application: Ideal for industrial coating and drying processes, e.g. furniture or wood processing sectors. Bwsdpfexdwi Iox Amrju Other information: Viewing possible by appointment

Condition: excellent (used), Year of construction: 2016, Schiavo Easy 1600.4 Max. Glas-height: 1.600 mm Thickness: 3-19 mm Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone Bwodpfxeyr N R Us Amreu LED lights on the outled for inspection

Condition: excellent (used), Year of construction: 2025, Demonstration machine Strapping machine, Easy Strapper model Bodpfxoydf Dus Amrswu 12mm strap Frame size 850x600

Year of construction: 2007, condition: ready for operation (used), overall weight: 1,300 kg, number of axes: 3, This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a maximum load capacity of 1500 kg and a magazine plate with 6 positions per level. The machine has a Z-axis travel of 75 mm and an M-axis capable of 360° movement. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details. • Maximum Load Capacity (Magazine): 1500 kg • Magazine Plate Type: MTS 400 • Magazine Capacity: 6 Positions per Level • Maximum Load per Level: 1500 kg • Maximum Load per Position: 250 kg • Maximum Transfer Weight (RCS 5): 250 kg • Maximum Transfer Weight (RCS I): 130 kg • Required Coupling for Loads >130 kg: RCS 5 Coupling with RCS 5 Gripperlink ER-038622 Bwodpfx Amozcdwderju • Supply Voltage: 3 × 400 VAC ±10% / 3 × 208 VAC ±10% / 3 × 480 VAC ±10% • Frequency: 50/60 Hz • Power Rating: 710 VA • Nominal Current: 1.8 A • Fuse Protection: 10 ATT • Service Socket Voltage: 230 VAC • Minimum Pneumatic Pressure: 5 bar • Minimum Air Consumption: 200 l/min (Nameplate) • Pneumatic Air Quality: Dry, Oil-Free • X-Axis Travel: Type Dependent • Z-Axis Travel: 75 mm • M-Axis Rotation: 360° • Z-Axis Drive: Pneumatic • M-Axis Drive: Electric • Net Weight: 1300 kg • Interface Type: EROWA Standard Interface • Communication Interface: RS232 • Optional Communication Interface: RS422 • Interface Connector: 72-Pin Harting Connector • Communication Protocol: EROWA EWIS Protocol • Alternative Communication Protocol: EROWA Standard Protocol • Robot Door: Pneumatic Door Valve Kit • Pneumatic Connection: Standard • Electrical Connector: Harting 6-Pin (230 V) • Electrical Connection: 230 V (Phase 1 + 2) • Machine Condition: No Longer Connected to Power • Viewing: Available

Condition: used, mileage: 1,001 km, first registration: 01/2018, overall weight: 7,800 kg, color: white, driver cabin: other, gearing type: other, loading space volume: 6 m³, loading space length: 3,400 mm, loading space width: 2,000 mm, loading space height: 450 mm, Year of construction: 2018, Vehicle location: Bovenden, steel body, lashing eyes, swing gates. Body: 3-way tipper body with aluminium extension side panels (450mm) & electric hydraulic pump, approx. 6m³. Suitable for example for Mercedes Sprinter or Iveco Daily! TOP condition, only mounted on truck for approx. 16,000km! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Bwodpfx Amoyuy N Tjrsu

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Machine in excellent condition, very little used, year 2002, three-phase motor. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Bjdoxlznwjpfx Amrjwu

Condition: good (used), ZIM Hülsta cabinet press NOW Easy Make: ZIM Hülsta-Werke Type: NOW Easy Ser. no.: 380125028 Carcase max. 260 x 1100 mm 2 supports at the bottom, movable 2 press bars at top, movable Beckoff control panel Roller conveyor 4500 x 600 mm Roller width: 500 mm Overall dimensions: W x D x H 3300 x 1800 x 3600 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request! Bedpfxjvdbv Aj Amrewu

Year of construction: 2014, condition: good (used), Millipore Flow Cytometer Guava easy Cyte 8 HT, manufactured in 2014. Regularly maintained. Includes PC and software. Location: Cologne. Bjdpfx Amjiv S Arerswu Due to laboratory closure, various equipment is available; please request a detailed list.

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, arm reach: 2,890 mm, type of input current: three-phase, load capacity: 6 kg, type of cooling: air, Equipment: cabin, On behalf of a client, we are selling a used Easy Arc 01 welding robot cell from OTC Daihen. The welding robot cell was used to a limited extent for training purposes for vocational school students and future operators of welding robots. In total, the system has approximately 100 operating hours. The system was purchased in November 2019 and put into operation in 2020. It has been idle for 3 years, which is why it is now being sold. Due to the low operating hours spread over the years, the system is still in very good condition, almost like new. Bjdpfx Amszkanajrswu The Easy Arc was developed by OTC Daihen as an entry-level solution for welding automation. The highly precise welding robot and the already integrated welding table ensure efficient welding production. The compact design facilitates transportation. In addition, the low assembly effort enables a quick start of production. The Easy Arc 01 consists of the following components: - OTC welding robot, type FD-B6: 6-axis articulated arm robot with a load capacity of 6 kg, including robot controller, type FD-11, and touchscreen control panel - OTC MIG/MAG welding system, type Welbee WB-P400: 400A inverter pulsed welding power source with integrated robot interface - OTC torch, type RT3500H: Robot welding torch (45°) with safety forced stop and 4-roll wire feed system, max. output 350A, gas-cooled, collision protection type B integrated - Siegmund welding table: 2000x1200mm and insertion height 950mm, load capacity 3,200kg, 28mm hole pattern with 100x100mm hole grid for accommodating appropriate clamping technology - OTC safety system: Sturdy safety enclosure including dual-channel monitored material gate and "Robot Monitoring Unit (RMU)". The use of RMU ensures that compliance with the predefined working area of the robot according to Performance Level PLd is guaranteed. The system is CE-compliant (as well as compliant with UVV / VDI / DIN) and can be connected to any standard 32A three-phase power outlet due to an integrated residual current circuit breaker (type B). Further technical data: - Positioning accuracy: +/- 0.08mm - Maximum working area in the P-point: Ø2890mm - Memory capacity of the robot controller, type FD-11: 9999 programs - Communication between the robot controller and the welding system via digital CAN-BUS - Welding power source Welbee WB-P400: Output current range 30-400A, output voltage 12-34V, duty cycle 280A/100%, digital inverter technology with high arc stability over the entire current range The system is delivered including extensive accessories (see picture) for steel and aluminum. In addition, an extraction hood is included in the scope of delivery. The Easy Arc is currently still at the customer's site and is no longer in operation. An inspection may be possible after prior arrangement. Transport must be organized by the buyer; loading will be done on-site. If you have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2008, Spraying machine CEFLA FINISHING EASY 2000 DUO D Pictures are only sample - Producer Cefla - Type EASY-DUO - Year of construction 2008 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Exhaust air 12.000 m³/h - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with roller - Lacquer reclaiming system with v-belt - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. Bsdpfx Aezv Tg Tomrswu - spray gun type Kremlin AVX - Airmix spraying system - Height adjustment for spraying guns - Number of lacquer pumps 1 Stk. - Producer lacquer pump Kremlin 16-120 - Supply air box - Ex-prevention - Suitably for solvent based lacquer - Suitably for water based lacquer - Used machine, good condition - Length ca. 6152 mm - Width 3.700 mm - Height 2.895 mm - Total connection power 18 KW - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: EM196 - IS4095, Steel crane, overhead crane, gantry crane, indoor crane Load capacity / lifting capacity: 5t - 5000KG Track gauge: 11,390mm, overall dimensions approx. 11,550mm TYPE EL-C 50 11,390 E Year of manufacture: 2001 Lifting height: 6m Overall height from top of crane to hook: approx. 900mm Head beam length with buffer: approx. 2290mm Bjdezv H Anopfx Amrewu With floor-mounted control Crane is dismantled and immediately available Very good condition, see pictures Column-mounted slewing cranes and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: reconditioned (used), Year of construction: 2015, Boschert EASY SHARP tool grinding machine Equipped for Trumpf tool system (Amada system optional) Machine for maintaining stamping tools, with a cooling system and an extra-powerful motor, making it also suitable for use with diamond grinding wheels. Used machine, currently being refurbished Equipment for Trumpf tool system up to size III Accessories: Tool holder for flat punches and Whisper punches Die holders for sizes I, II, and III New corundum grinding wheel Bjdpfx Ajid I T Iomrewu Truing diamond Cooling system overhauled and machine base frame Technical data: Grinding wheel diameter 175 mm Vertical adjustment 150 mm Working area 400 x 150 mm Motor power 2.2 kW Motor speed 2825 rpm Adapter for Amada system also available as an option Images are similar

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of cooling: water, Equipment: cabin, For sale is a ready-to-use, compact, plug-and-play welding cell: OTC Easy Arc MIG/MAG 3.03. This system combines precise robotic technology with a high-performance, high-end welding power source and a fully automatically controlled horizontal rotary positioner. It is ideally suited for the automated, cost-effective production of small and medium-sized series. The entire cell is mounted on a stable base frame with a welding table/perforated plate and can be easily integrated into your production process. Technical highlights & components: Robot FD-B6: Highly dynamic 6-axis articulated arm robot, optimized for arc welding with internal cable routing (6 kg payload). Controller FD11: Modern robot controller for precise path guidance, including an ergonomic teach pendant for quick programming. Welding power source Welbee Inverter P400: Pulse welding power source (400 A) for spatter-free welding of steel, stainless steel, and aluminum, even at high welding speeds. Easy Arc PB250 Positioner / Horizontal Rotary Table: Fully controlled additional axis (up to 250 kg payload) for precise workpiece rotation, which enables welding in the optimal weld pool position, even with complex components. Safety concept: Complete enclosure including welding protection viewing windows and CE-compliant safety technology for direct use in a workshop. Condition & scope of supply: The system is in very good, fully functional, and ready-to-use condition, as it has been used only rarely. Scope of supply: Complete welding cell as described, including welding torch equipment, cable package, and documentation. The system is available immediately and can be inspected under power after consultation. Technical data at a glance: Manufacturer: OTC DAIHEN Europe GmbH Model: Easy Arc MIG/MAG V03.03 Year of manufacture: 2024 Power connection: 400 V / 50 Hz B2B sale with exclusion of all warranties. Subject to prior sale. Net price plus VAT ex Philippsburg. Loading can be arranged on-site. Components: Robot welding cell as shown OTC welding robot Easy Arc MIG/MAG 1.03, robot FD B6 Easy Arc PB250 (Move) programmable positioner for automatic component alignment Controller FD11 Welding machine Welbee P400 Bwsdpfozvqunsx Amrsu Additional equipment: Water cooling If you have any questions or require further information, please send us a message or call us. An inspection and demonstration are possible at any time.

Condition: used, axle configuration: 3 axles, first registration: 06/1992, color: other, Year of construction: 1992, Carrying capacity: 35.000 kg Axle 1: left 10-10 mm right 10-10 mm Axle 2: left 8-8 mm right 8-8 mm Bwedew I Euzjpfx Amrju Axle 3: left 6 6 mm right 6 6 mm

Year of construction: 2008, condition: good (used), Pressbrake LVD - PPEB EASY FORM 320/40 MACH-ID 7712 Make: LVD Type: PPEB EASY FORM 320/40 Control: CADMAN Year: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Specifications Metric US Standard Max. bending length Bwjdpjnvduzsfx Amrou 4000 mm Distance between column 3150 mm Max. pressing force 320 T Dis. Beam - Table 570 mm Beam stroke 300 mm Table Width 200 mm Troth beam 400 mm Approch speed 120 mm/min. Working speed 14 mm/min. Return speed 130 mm/min. Adjustment X-Axis back gauge 1000 mm Control CADMAN Power 42 kW Dimensions (Estimate) Length 5800 mm Width 2300 mm Height 3800 mm Weight 23000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), Year of construction: 2022, High-pressure cleaner PTC Easypower E, similar to but not a Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, etc. - Operating pressure: 300-700 bar - Flow rate: 15-30 l/min - Motor: Electric 32A/63A, 3-phase 400V-50Hz 20-30 HP / 15-22.5 kW, 1450 rpm / 1750 rpm - Dimensions: 1,000 x 750 x 850 mm - Dry weight: approx. 180/210 kg - High-pressure pump: Comet three-piston pump with ceramic pistons - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance - Trolley with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-delta starter - Safety switch with thermomagnetic relay for motor protection - Operating hour counter - 4 industrial wheels, 320 mm - Direct water intake via self-priming pump - Stainless steel relief valve with pressure relief system and EASY START system - 100 mesh water filter with easily replaceable cartridge - Incl. 20 m high-pressure hose with stainless steel quick-release couplings, spray gun, 1200 mm stainless steel lance, and flat jet nozzle 15° The following models are available: Easy Power E 30/300 | 30 l/min, 300 bar | 18.5 kW Easy Power E 15/500 | 15 l/min, 500 bar | 15 kW Bedpefdz E Hefx Amrswu Easy Power E 21/500 | 21 l/min, 500 bar | 22 kW Easy Power E 15/700 | 15 l/min, 700 bar | 22 kW