Used Rps Far014 for sale (88)

Condition: good (used), Year of construction: 2007, Fast root de-sharpening in cross-feed mode Pedpfx Ajyyk D Tjmyspw 75 kW milling shaft Including hydraulics

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Ppjdpfx Amstmqi Djyow The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Podpfx Ajpugwiemyspw The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Year of construction: 2012, controller manufacturer: Siemens, controller model: 828D, _____ Description: Year of manuf. : 2012 Control : Siemens 828D Turning diam. : 280 mm Turning length : 558 mm Mainspindle: Technology:Belt-driven spindle Speed:4.500 rpm Power (max.):15 kW Torque (max.):179 Nm Barcapacity:65 mm Workpiececlamping I:Collet chuck, Ortlieb TS 65/6D Workpiececlamping II:3-Jaw chuck, SMW Autoblok KNCS-N 170-43 Subspindle: Technology:Motorspindle Speed:6.000 rpm Power (max.):7,5 kW Torque (max.):48 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N 170-43 Movement in Z:650 mm Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:BMT Tooldrive:4.000 rpm Movement in X/Y/Z:260/110/620 mm Eilgang in X/Y/Z:24/10/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with High-pressure Toolmeasurement:Automatic Measuringarm, Renishaw RP 3 Rawmaterialfeed:Barloader, MKE HL 12 pneumatic Finishedpartremoval:Partstray with conveyor belt Oilmistseparation:Mechanical extraction, Sara UC1 SD Toolholder:Misc. static and driven toolholder Further Accessory:Misc. used clamping heads and spindle reducers Ppsdoznqynspfx Amyjw

Condition: new, Year of construction: 2025, The device has 2 cooling systems: - Laser head cooling system Pjdpfx Asv Aipnsmyepw - Laser source cooling system Chiller designed for lasers up to 1500 W Designed for cooling tubes in laser plotters thanks to the use of a cooling unit. The chiller maintains the correct working temperature of the laser source, ensuring constant cutting or engraving quality throughout its use. Technical parameters Tank capacity 15L Max. water cycle 70L/min Water head lift 45m Cooling capacity 5.1kW Refrigerant R-410A Pin diameter 1/2" rp Power 220V (+-10%), 50Hz Weight 72kg Dimensions 700x470x890mm

Condition: new, Year of construction: 2026, Chiller HL-2000 The HL-2000 maintains stable operating conditions for fibre laser cutters up to approximately 2 kW, ensuring a consistent coolant temperature with ±1 °C precision. This thermal stability directly translates into cleaner cutting edges, reduced downtime, and longer service life of both the laser source and optics/head. The dual-circuit system allows independent cooling of key components, while the larger tank and high flow rate ensure safe, continuous operation in production environments. User Benefits Process repeatability – stable temperature equals predictable beam and cutting parameters. Component protection – minimises overheating, reducing wear and the risk of failure. Production continuity – high flow rate and precise control prevent unplanned interruptions. Easy integration – standard fittings and 220 V/50 Hz power simplify installation. Operational efficiency – stable cooling reduces maintenance costs associated with thermal overload. Psdpfx Amszff Tdsyepw Applications Cooling of the laser source and optics/head in fibre laser cutters up to approx. 2 kW. Production lines focused on continuous operation and low failure rates. Operation Regular monitoring of water level, cleanliness and filter condition is recommended to maintain stable performance. The compact housing allows the unit to be placed close to the machine and ensures easy service access during daily operation. Operates with the widely used R-410A refrigerant, ensuring easy servicing and material availability. Technical Specifications HL-2000 Model HL-2000-QG2/2 Tank capacity 19 L Flow rate (circuit) 33 L/min Connector diameter 1/2" rp Lift height 45 m Cooling capacity 5907 kcal/h (≈ 6.7 kW) Compressor power 3.3 kW (3.08 HP) Pump power 0.55 kW Refrigerant R-410A, 1800 g Temperature control accuracy ±1 °C Power supply 220 V (±10 %), 50 Hz Rated current 15 A Dimensions (W×D×H) 600 × 470 × 890 mm Weight 70 kg

Condition: excellent (used), EOS P 396 Laser Sintering System Manufacturer: EOS GmbH Type: P 396 Machine Type: Industrial SLS laser sintering system for plastic components Process: Selective Laser Sintering (SLS) For sale is a professional, industrial laser sintering system from EOS GmbH. The system was developed for the additive manufacturing of plastic components using the Selective Laser Sintering process and is suitable for prototyping, small-series production, research and development, as well as industrial production applications. Technical Data Technology: Selective Laser Sintering (SLS) Usable build volume: 340 x 340 x 600 mm Build rate: up to 48 mm/h (material-dependent) Layer thicknesses: 0.06 mm 0.10 mm 0.12 mm 0.15 mm 0.18 mm Laser system: CO₂ laser Laser power: 70 W F-Theta precision optics Scanning speed up to 6 m/s Laser class 1 Voltage: 400 V 3~ / N / PE Frequency: 50 / 60 Hz Rated power: 10 kW Current draw: 16 A Fuse rating: 32 A Supply: Integrated nitrogen generator External nitrogen connection available Compressed air supply required: at least 10 m³/h at 5,000 hPa Software EOS PSW EOS RP Tools EOSTATE Interfaces STL Ethernet Certifications CE NFPA EN 60825-1:2007 Maintenance Condition Current service and maintenance records are available. According to the available service reports, the following work has been carried out, among others: Heating elements replaced Roller belt replaced X-axis and carriage cleaned Laser window and mirrors cleaned Seals replaced Safety circuits checked Docking Station / Powder Supply Docking station with pneumatic conveying system for automated powder supply to the laser sintering system. Manufacturer: HYDAC Cooling GmbH Type: FWKS-G2-001500-W-W-R25-2-IW-UL Electrical data: 230 V ±10 % 1 PH / 50-60 Hz Max. current draw: 8.0 A ICC / SCCR: 10 kA CE / RoHS Additional Equipment Control panel Docking station Pneumatic conveying system 2 x EOS Multibox Capacity per Multibox: approx. 230 liters For storing, collecting, and transporting fresh and used powder. Dimensions and Weight System including control cabinet: approx. 1,840 x 1,175 x 2,100 mm Control panel: approx. 950 x 700 x 1,550 mm Total weight of laser sintering system: approx. 1,400 kg Recommended installation space: Pjdpfjzarg Uex Amyspw at least 4.3 x 3.9 x 3.0 m Areas of Application Additive Manufacturing Rapid Prototyping Small-Series Production Automotive Industry Mechanical Engineering Aerospace Medical Technology Research and Development Scope of Delivery EOS P 396 Laser Sintering System Control panel Docking station 2 x EOS Multibox Available documentation Service reports Accessories and components as shown in the pictures Condition Used Machine from industrial use Optical condition as shown in the pictures Scope of delivery as shown Inspection and testing on site possible and expressly desired after prior appointment. Shipping or freight forwarding possible. Availability: upon agreement. Scope of delivery as shown. Changes and errors in the technical data as well as prior sale are reserved.

Year of construction: 2016, condition: good (used), Retigo O611ic Combi oven 2016, RP series, Stainless combi oven, electric, 10Kw, with steam, with 7 trays, adjustable timer and temperature controls, mounted on tray rack, 1Ph Podperywxkefx Amyjpw

Year of construction: 2016, condition: good (used), Retigo O2021ic Combi oven Psdpfx Asrywvasmyopw 2016, RP Series, Stainless combi oven, electric, 59Kw, with steam, with trolley for 20trays, adjustable timer and temperature controls, with two trolleys, 1Ph

Year of construction: 2016, condition: good (used), Retigo O2021ic Combi oven Ppodpferywu Sjx Amyew 2016, RP series, Stainless combi oven, electric, 59Kw, with steam, with trolley for 20trays, adjustable timer and temperature controls, with two trolleys, 1Ph

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, roll/cargotrailers -Manufacturer: Bartels, heavy-duty transport truck industrial trailer type RP-S -Platform: 2500/1250/H345 mm -Load capacity: approx. 2000 kg -Tires: solid rubber Ppodpjl Sr Alsfx Amyew -Number: 2x transport trolleys available -Price per piece -Transport dimensions. 2500/1250/H345mm -Own weight: 100 kg/pc.

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, roll/cargotrailers -Manufacturer: Bartels, heavy-duty transport truck industrial trailer type RP -Platform: 2000/1000/H340 mm -Load capacity: approx. 2000 kg -Tires: solid rubber Ppodpfx Amel Tuu Ioyow -Own weight: 70 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump Pedpfxsyzmvhj Amyjpw -Type: RP 62C -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg

Condition: good (used), Flange connection, V-flange, pipe coupling, weld reducer, reducer, clasp end, pipe bend, weld bend, pipe angle -Pipe bends: 90° welding bends, 13 pieces -Type: RP CH WPD 139.7x4 30360 9 pcs. -Type: SF RO EN2 A... 139.7x4 P235 GHTC1 4 pcs. see photos Pedpfx Aoq N E Rbsmyspw -Price/Sale: complete -Stock: other sizes/types also available, please inquire. -Transport dimensions: 1200/750/H140 mm -Weight: 78 kg with pallet

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Ppsdpjzg Ty Usfx Amyow For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), Eos EOSINT plastic laser sintering systems Here, we offer an Eos EOSINT plastic laser sintering system. Eos EOSINT plastic laser sintering system P385 The following items are included with the EOS P385 system: Build chamber Powder container Cooler: Termo TEK Thermochiller 1100 Podpfx Ajzdyx Eomyepw The following upgrade has already been carried out: Software: CDs Eosint P3 process software PSW 3.2 for Windows 2000, XP Materialise: Magics RP 9.0 Machine upgrade from P360 to P385 on August 10, 2007 Laser replacement on May 15, 2008 X-axis drive motor replacement with a used motor on May 4, 2020 Pyrometer replacement on June 30, 2020 350mm x 350mm x 610mm Voltage 3/N/PE/400V, Frequency 50 Hz Connected load 8 kW, Fuse rating 32 A MAX. laser power 100 W, Laser class open 4 Laser class closed 1 Weight 850 kg Type: EOSINT Upgrade P385 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 7600-101325, load capacity: 340 kg, arm reach: 2,800 mm, pivoting range: 360 °, warranty duration: 4 months, Equipment: documentation/manual, Robot with a 4-month warranty General overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Changing the oils for all six axes. - Battery replacement: All internal batteries were replaced with new batteries. - Mechanical maintenance: Gears and counterweight were inspected and serviced after repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, teach pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in the original color or a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Control: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 revolutions Dynamics (max. rotation speed per axis) Pedpfozdrx Rjx Amyopw Axis 1: 75°/s Axis 2: 60°/s Axis 3: 60°/s Axis 4: 100°/s Axis 5: 100°/s Axis 6: 160° °/s Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm FEATURES - 6-axis industrial robot with a high payload class - Large swivel range on axis 6 with up to 67 revolutions - Precise path guidance with repeatability of less than 0.3 mm - High speed of the wrist axes for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences

Year of construction: 2006, condition: ready for operation (used), A complete Battenfeld compact extrusion line for the production of PVC profiles is available. 1) Twin-screw extruder Battenfeld MBEX 2-50-16 V, year of manufacture: 2006, output capacity: 15kg-60kg/h, screw diameter: 52mm, screw length: 16×D, barrel zones: 4, barrel cooling zones: 3, adapter zones: 1, die heating zones: 9, control system: BMCtouch. Including dry vacuum pump, pressure measuring points, clamping flange, water-air separator, blow-off device, mounting elements and hopper cover. 2) Calibration table Battenfeld KP 125 V 2/4m, mounting frame length: 4100mm, mounting rail width: 320mm, longitudinal adjustment: 500mm, transverse adjustment: +/-15mm. 3) Speck vacuum system, pumps: 2, motor power: 2×4kW, operating pressure: 200mbar, max. air capacity: 2×140m³/h. 4) Battenfeld RP 125 SE caterpillar haul-off, passage height: 100mm, contact length: 1100mm, pad width: 160mm, haul-off speed: 15m/min, max. haul-off force: 7kN. 5) Battenfeld SP 63 E underfloor saw, max. cross-section capacity X/Y: 200mm/300mm, sawing accuracy: +/-0.5mm. Overall line dimensions X/Y/Z: approx. 12000mm/1200mm/2000mm, weight: approx. 4500kg, operating hours: approx. 319h. Including chip extraction. The line touchscreen is defective (nothing is visible), however, the line can be operated using an external monitor, mouse and keyboard. Documentation available. An on-site inspection is possible. Psdpfozg Iqhsx Amyepw

Condition: ready for operation (used), Willy Vogel RP-68.31 lubrication pump, used, in good condition, 100% fully functional, delivery as per photos. Ppsdpjy S Nl Tefx Amysw

Condition: ready for operation (used), Year of construction: 2010, overall weight: 250 kg, total height: 1,294 mm, number of axes: 6, This 6-axis ABB IRB 1600 robot arm was manufactured in 2010. It features versatile mounting options including floor, wall, and inverted setups, and is compatible with IRC5 and OmniCore controllers. With a maximum arm load of 30.5 kg and a reach of up to 1.45 m, it's ideal for a variety of applications. Consider the opportunity to buy this ABB IRB 1600 robot arm. Contact us for more information about this machine. • Type: 6-axis industrial robot (supports up to 3 external axes via MultiMove; max 36 axes) • Maximum payload: 30.5 kg (with 1.2 m reach) / 20.5 kg (with 1.45 m reach) • Protection class: IP54 standard; IP67 optional (Foundry Plus) • Mounting options: floor, wall, shelf, tilted, inverted Psdpex D E Tnjfx Amyopw • Controller compatibility: IRC5 (Single, Dual, Compact), OmniCore (C30, C90XT, V250XT, V400XT) • Axis ranges: • Axis 1: ±180° • Axis 2: +136° / –63° (1.2 m) or +150° / –90° (1.45 m) • Axis 3: +55° / –235° (1.2 m) or +65° / –245° (1.45 m) • Axis 4: ±200° (default), max ±190° revolution • Axis 5: ±115° • Axis 6: ±400° (default), max ±288° revolution • Repeatability: • Position repeatability (RP): 0.02 mm (6 kg) / 0.02–0.05 mm (10 kg) • Path repeatability (RT): 0.06–0.19 mm • Maximum joint speeds: • Axis 1: 150–180°/s • Axis 2: 160–180°/s • Axis 3: 170–185°/s • Axis 4: 320–385°/s • Axis 5: 400°/s • Axis 6: 460°/s • Wrist torque: Axis 4 & 5 ≈ 8.58 Nm; Axis 6 ≈ 4.91 Nm • Electrical: 200–600 V, 50/60 Hz; max power consumption 0.58 kW • Dimensions: Base 484 × 648 mm • Height: 1069 mm (1.2 m reach version) / 1294 mm (1.45 m reach version) • Operating temperature: +5 °C to +45 °C

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Pjdsu Idnmspfx Amyopw Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: used, mileage: 128,153 km, power: 107 kW (145.48 HP), first registration: 03/2012, fuel type: diesel, empty load weight: 3,310 kg, maximum load weight: 4,180 kg, overall weight: 7,490 kg, axle configuration: 6x4, wheelbase: 2,450 mm, brakes: other, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, operating hours: 6,006 h, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, parking heater, parking sensors, power assisted steering, soot filter, trailer coupling, German vehicle, condition as shown in photos. Multicar 6x4, very rare, 3 axles, winter service body, Fiedler snow plow blade, type: FRS 2420, clearing width up to 2,400 mm, Fiedler flat silo spreader body, type: FSS 2000, container volume 2.0 m³, spreading width: 1.00 to 8.00 m, front lift, quick change system, trailer coupling, towing capacity: 3,500 kg, air conditioning, auxiliary heater, comfort seat, 5-speed gearbox, joystick control, heated electric mirrors, reversing camera, radio USB, all-round warning lights, electric windows, leaf spring suspension, emissions standard: Euro 5, rotating beacon, road approval: 90 km/h, etc. Various attachments for year-round use available at extra cost, such as Dücker Uni Arm UNA200, Schmidt RPS-H delineator washing system for front mount + 1,000 liter water tank, etc. Wheelbase: 2,450 mm, gross vehicle weight: 7,490 kg, unladen weight: 3,310 kg. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, DGUV, SP, or UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish. Ppedpfowmc Spex Amyjw Note: We offer and strongly recommend a viewing and inspection of the goods to avoid misunderstandings regarding condition and suitability. Viewing and inspections are possible at any time by appointment and are explicitly desired. All information is provided without guarantee. We accept no liability for errors or incorrect information in this offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Podpfx Ajvvcqxomyspw Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Condition: good (used), Year of construction: 2002, overall weight: 110 kg, type of input current: three-phase, input voltage: 400 V, fuel: domestic gas H, input frequency: 50 Hz, Equipment: type plate available, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation Pjdpsvmhq Ejfx Amyepw machine length: 1100mm width: 700mm height: 500mm Dc200Rj weight 110 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, input frequency: 50 Hz, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm Pedpou A Illjfx Amyopw flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm weight 110 kg