Used Punching & Bending Machine for sale (64,650)

Condition: new, 95 mm Shaft diameter 30 mm Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg range L-W-H 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material Rsdpfoyv N A Hox Aahew etc.

Condition: new, 300 kN stroke length max. 235 mm 200x24 mm bending capacity max. - round 60x4,0 mm toolpiece height max. 250 mm 660x1250 mm work height max. 900 mm return speed 20 mm/sec working feed 10 mm/sec total power requirement 3 kW weight 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) Rjdpfjyv I Tdsx Aahjw - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm

Condition: new, sheet width 1250 mm plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: Redeyvvpyjpfx Aahew - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, Year of construction: 2019, sheet width 1050 mm plate thickness 4,0 mm roll diameter 110 mm total power requirement 2,2 kw Rsdpfjzh N Uwex Aahjw

Condition: new, engine 2,8 KW Rodpfx Ajy H N Nzoahjw weight of the machine ca. 320 kg dimensions of the machine ca. 86 x 90 x 85 cm

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg Rodpfx Aoyvvrheahow dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Rjdpfxjyvvnij Aahsw Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar length 3750 mm Redpfx Aebahd Eoahow

Condition: good (used), Year of construction: 2014, functionality: fully functional, Sheet width: 3000 mm Sheet length: 1500 mm Sheet thickness: 8 mm Workpiece weight: 200 kg Punching force max.: 220 kN Total power requirement: 9.5 kW Space requirement approx.: 7395 x 6540 x 2072 mm Equipment: Punch head: - Hydraulic single-tool chuck with 360° rotation - Manually adjustable clamping force - Programmable clamp (active/passive/re-positioning) - Spray lubrication for punch - Stroke counter for punch - Level monitoring for threading and tool lubrication Control system: - Open control system based on Sinumerik 840 D - 12" TFT color display - Teleservice via internet - Automatic shutdown Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual light curtains - Rapid shutdown of hydraulics - Bulge detection Programming: - TruTops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread forming function 1 x Deburring and rolling technology 1 x SoftPunch function 4 x individually openable clamping jaws 4 x height-adjustable clamping jaws 1 x Re-positioning cylinder 1 x Sensor for stripper (included in rest material-free processing) - GripMaster - Rest material grippers with sensor technology - Shear lift table 400 mm - Tilting rest material pallet 3000 x 1500 mm Rsdpfx Aajy Sak Tehow - SheetMaster - Operating hours: 65,000 h

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m Redpeu Ibukjfx Aahew dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts *

Condition: used, Year of construction: 1995, total length: 2,900 mm, total width: 1,000 mm, total height: 1,400 mm, Colour: Green Empty weight: 4.500 kg Price: On request - Year: 1995 Redpfx Aaszhbhcohow - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 34010 HV - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 15.0 - Shaft diameter [mm]: 135 - Moment of resistance [cm³]: 120 - Top roll diameter [mm]: 390 - Bottom roll diameter [mm]: 390 - Capacity diameter round [mm]: 90 - Options: 3D rolling, Digital readout, Extra rolls - Transport dimensions: 2900mm x 1000mm x 1400mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1996, control type: CNC control, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Rsdpfx Aszibvpsahjw Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: used, Year of construction: 1996, functionality: fully functional, Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Weitere Gebrauchtmaschinen von Mabu, Bruderer, Bihler und Schaal stehen in unserem Lager zum Verkauf. Technical Specifications Model: T 130R CE Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Rsdpfx Aozg U R Ijahew Max width: 200 mm Operating pressure: 3–6 bar

Condition: excellent (used), functionality: fully functional, Gade Bending Machine 3100 X 25 Ton Mod. 30/25 Used Machine Rsdpfswrrhwex Aahsw Internal Code: Svr 317

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Alba DAR 45, Used Machine Manufacturer: Alba (Spain) Type: DAR 45 (Dobladoras Automáticas) Overall dimensions: Width: 1300 mm Depth: 800 mm Height: 830 mm Weight: 555 kg Redpfx Aoy Rh Rfsahow Electrical data: 400 V Maximum bending diameter: Ø 45 mm (single bar, for 450 N/mm² steel grade) Bending speed: 2 speed settings (higher speed for smaller diameters)

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Peddinghaus Special 32, Used Machine Manufacturer: Peddinghaus Type: Special 32 Redey R A Niopfx Aahsw Overall dimensions: Width: 660 mm Depth: 850 mm Height: 830 mm Weight: 325 kg Electrical data: 400 V; 7 A Bending capacity: max. Ø 32 mm (single bar) Bending speed: approx. 10 rpm Motor power: 2.2 kW Control system: Automatic bending angle adjustment, foot pedal start

Condition: used, operating hours: 16,158 h, Rebar Bending Machine, MEP FOCUS 12 Rebar Bending Machine, Used Machine Manufacturer: MEP S.p.A., Italy Model: FOCUS 12 Year of manufacture: 2006 Overall dimensions: MEP bending machine: Width: 3660 mm Depth: 1620 mm Height: 2350 mm Decoiler: Width: 4820 mm Depth: 1980 mm Height: 1460 mm Bending capacity: 6–12 mm Accessories: 5 pcs wire coils 1 pc 8 mm bending tool Programmability: One of the major advantages of the "Focus" series is that the bending angles can be set via an electronic control panel. There is no need to manually adjust mechanical stops as on older Hungarian machines. This significantly speeds up production when, for example, 100 identical stirrups need to be bent. Rodpjzaq Dljfx Aahjw The control system retains its programs even if the machine remains without power for months or even years. The software runs on a dedicated computer. MEP provides full service and technical support for all of its machines, regardless of their year of manufacture.

Condition: ready for operation (used), Pipe Bender, Tube Bending Machine, Profile Bending Machine, SHS/RHS Bender, Used Machine Manufacturer: Schwarze-Wirtz Model: Perfect H135 Dimensions: 6115 x 2870 x 1300 mm Bending Capacity: Round tube: Ø 130 mm, bending radius: 500 mm Square tube: 30 mm, radius: 380 mm 45 mm, radius: 500 mm 50 mm, radius: 500 mm Redpewhmv Uefx Aahew 70 mm, radius: 500 mm 90 mm, radius: 500 mm Bending Angle: up to 180° Electrical Specifications: 380 V

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Very high empty weight for optimum stability during operation. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max. pipe bending range up to 50 mm. The bending machine allows work in both vertical and horizontal planes. Machine characteristics Rsdpeu Snm Ijfx Aahjw Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal various roller sets DTR in Polish CE declaration Technical data Material: round tube [mm] 50 x 2 Material: rectangular profile [mm] 50 x 50 x 2 Material: round bar [mm] 35 Material: solid rectangular piece [mm] 35 x 35 Diameter of rollers [mm] 40 Motor power [kW] S1 1.5 / S6 2.2 Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 900 x 850 x 1700 Weight [kg] 485

Condition: good (used), Year of construction: 2023, operating hours: 972 h, machine/vehicle number: 0223, Offer 26174 Technical data: - Bending capacity - Pipe at 45 kg / mm² Ø 6 - 48 mm - Wall thickness up to 3.25 mm - Max. bending radius 180 mm - Bending speed 20 °/sec. - Drive 400 V / 2.4 kW - Space requirement approx. W 6200 x H 1200 x D 1000 mm - Weight approx. 1100 kg - Operating hours recorded 972 h - with - Digital bending angle display + fine adjustment of bending angle - with SIEMENS SIMATEC control panel with touch screen Rjdpfxezh Elxo Aahow - Mandrel bending unit 4.5 m with hydraulic retraction - Saw unit - Deburring unit for internal and external deburring - Pipe positioning system - Bending tools without mandrels - 6, 8, 10, 12, 16, 20, 22, 28, 30 mm - Partially, possibly incomplete

Condition: good (used), Year of construction: 2006, control type: CNC control, actuation type: hydraulic, controller manufacturer: PC 300 TOUCH, number of rollers: 3, shaft diameter: 105 mm, overall weight: 2,200 kg, total length: 1,850 mm, total width: 1,600 mm, total height: 1,400 mm, Profile bending machine PBT - PBT 35 MACH-ID 9661 Make: PBT Type: PBT 35 Control: PC 300 TOUCH Year: 2006 Front rollers vario adjustable 360 - 1100 mm Power 11 kW each Force pressure in X-Axis 35.000 Kg Hydraulic drive variomatic UNP 200 x 1200 mm T 100 x 100 x 10 x 1200 mm Bar 80 x 80 x 1400 mm Pipe 180 x 2000 mm Horizontal and vertical:Vertical Shaft Ø: 105mm Number of rolls: 3 Stroke X-Axis: 390mm Rsdpfx Ajzguqnoahjw Resistance moment: 3000 NmCM³ Working speed: 1 - 16 U/Minmm/min. Length: 1850mm Width: 1600mm Height: 1400mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2000, condition: ready for operation (used), A hydraulic 4-roll plate rolling machine Promau (Prümau) is available. Working width: 3000mm, bending capacity: 13mm, pre-bending capacity: 10mm, rolls: 4. An on-site inspection is possible. Rjdpfx Aszhw Tusahew

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max pipe bending range up to 30 mm. The bending machine allows working both vertically and horizontally. Machine characteristics Rjdpfx Aaju Snlkjhsw Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal Driver's manual in Polish CE declaration Technical data Round tube [mm] 30 x 1 Rectangular profile [mm] 30 x 30 x 1 Round bar [mm] 16 Solid rectangular piece [mm] 30 x 10 Shaft diameter [mm] 30 Rotation [rpm] 9 Motor power [kW] 0.75 kW Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 1200 x 750 x 1210 Weight [kg] 252

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,100 h, Manufacturer TRUMPF Type TruMatic 1000 - 1600 Fiber (K07) Year 2018 X-axis travel 3000 mm Laser nominal power 3000 Watts Control system Bosch CML 45 Punching force 16.5 to Max. sheet thickness 6.4 mm Max. material weight 150 kg Standard configuration Machine ⦁ Box frame ⦁ Hybrid axis system ⦁ Linear magazine with 20 stations for clamps and tools ⦁ Hydraulic clamps (3x) ⦁ Drives with maintenance-free AC motors Rodpfx Aaozgfnqshow ⦁ Follow-up device with programmable pressure foot ⦁ Foot switch for closing the clamps ⦁ Part separator chute, right ⦁ Part removal flap, left ⦁ Sensor for part removal flap ⦁ Work area lighting ⦁ FocusLine ⦁ SortMaster Compact (retrofit option) TRUMPF Laser ⦁ LLK according to standard layout (10m) ⦁ Laser power control ⦁ Laser log function ⦁ Enclosed beam guidance via laser light cable (LLK) ⦁ Separate power supply for the TruDisk Compact cutting unit ⦁ Solid-state laser compact cutting system ⦁ Protective glass ⦁ Collision protection ⦁ ControlLine Punching head ⦁ Delta drive ⦁ Rotatable single-station tool adapter ⦁ Programmable pressure foot position ⦁ Tool length compensation ⦁ Punch spray lubrication ⦁ Punch slug vacuum ⦁ Forming function ⦁ Punching stroke counter Control system ⦁ TRUMPF control system based on Rexroth IndraMotion MTX ⦁ Touch panel with TFT 19" color screen ⦁ Integrated technology data ⦁ Programmable cutting gas pressure ⦁ Interface for remote maintenance ⦁ Automatic shutdown with wake-up function ⦁ Program manager ⦁ Production plan Options: Copper cutting package Brass cutting package Compressed air cutting Outfeed of small parts Brush tables Multitool Sensor for part separator chute Sign function, quick beading Multibend Thread forming Deburring roll technology Sorting function for part separator chute Height-adjustable clamps

Condition: not inspected (used), Bluhm Systems Marking Laser Here we offer a Bluhm Systems marking laser. Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards. The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser specification in standard configuration Laser type: Fiber laser Laser output power: FL2 model: 19W; typical Wavelength: 1062 nm typical Internal modulation: 20 to 80 kHz Scanner head description: Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens types and their properties: Lens marking field: 70x70 mm to 300 x 300 mm Focal length: B 192 mm Operating environment conditions: Relative humidity: up to 80%, non-condensing Operating temperature: 5 - 40°C Recommended operating temperature: 15-25°C Dimensions W x H x D Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length, marking/control unit: 3 m Weight, marking unit: 5 kg Weight, control unit: 15 kg Mains voltage 115/230 VAC, 50/60 Hz, single-phase. Power consumption, FL2 model: 450W Type: e-SolarMark FL Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone. Rsdpfx Aaozgci Ejhsw