Used Plank Srb-18H for sale (353)

Condition: used, axle configuration: 3 axles, first registration: 04/2018, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Superstructure: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design (for high ground load). Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure. (Semi-trailer construction, max. 39,000 kg) Axles and Suspension: "Disc brake 22.5" Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function. Wabco Smartboard information center, electronic brake wear indicator (BVA) readable in the control unit (display). First axle with starting assist (new EC regulation, without control unit). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on Alcoa DuraBright rims, 11.75x22.5 ET 120. Ljdpe Adxgxjfx Ab Asru Kingpin: 2" kingpin, screwed into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with swivel base. Braking System: According to EC standards, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator. Spring brake system acting on two axles, operated from the rear. Aluminum air tank system. Electrical System: According to EC standards 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket. Side marker lights in LED design. 2 reflective panels on the rear. Front position lights 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile. 2 separate LED reversing lights on the sides, approximately at the level of the supports. Superstructure/Body: "Superstructure fully welded inside", reinforced side walls. Front wall load: 17,250 dkn, side and rear wall: 13,400/10,400 dkn. Aluminum body, side walls: 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower belt. Plank profiles fully welded inside. Floor laid out as a sliding floor system on 140 mm aluminum cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approximately 350 mm). Aluminum front wall with 600 mm plank profile, 2-3 mm thick, straight design. Special aluminum corner profiles in a sloping design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 twist-lock fasteners, mounted in the welded aluminum rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving residual unloading wall with Kevlar sheet, approximately 1,800 mm long, plus side sealing with Kevlar sheet. Aluminum wear plates on the sides and rear, approximately 2,000x1,500x4 mm. Service door in the front wall. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approximately 880 PE-HD sliders, plus anti-lifting slide bearings. Type CF, 10 mm floor, ribbed design. Hydraulics with approximately 200 mm working stroke. Locking units, type "Faster". Line size NW 21. Locking units with size and design to be specified. Operating pressure 190-max. 240 bar. Aluminum end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, watertight box. Sliding floor rotated/wear

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 117, saw blade diameter: 800 mm, cutting height (max.): 300 mm, input voltage: 400 V, saw drive: 15,000 W, operating pressure: 6 bar, Solid and powerful machine for carpentry and timber construction. Longitudinal cuts up to 300 mm cutting height. 800 mm saw blade for a large cross-cutting range, mounted on a rotary table. This allows nearly any mitre angle to be set. Longitudinal cuts, trimming, notching, wedge planks – everything is possible. The double-sided feed system effortlessly processes even large beams through the machine. In cross-cutting mode, the feed pistons serve as hold-downs. Two-hand operation ensures safe usage. The integrated support in the machine provides 3 m roller conveyors on both the left and right sides. The support options can be expanded by using tall, stable 3-roller supports (optional). The machine is tested and in good condition. Both digital displays including sensors are new (repairs alone cost €5,000). Many hoses have been replaced. The pneumatic unit has been serviced. Everything else was in excellent condition due to the machine's robust design! Lsdpfx Abov Nktbj Aoru

Condition: used, Holzstar Type SRB 130 mobile scissor roller conveyor for flexible use in front of or behind machining centres, featuring a robust, height-adjustable steel frame and galvanised steel rollers. Multiple conveyors can be easily connected to one another using two hooks. Technical data: Lrodpfx Abszrx I Is Asu - Load capacity: 130 kg - Min. height: 670 mm - Max. height: 920 mm - Min. length: 450 mm - Max. length: 1,300 mm - Roller width: 480 mm - Condition: Demonstration model, new with warranty

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. Lrodpfx Abst E Nw To Aeu 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions

Condition: used, axle configuration: 3 axles, first registration: 10/2023, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 48 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beams with welded crossmembers. Chassis width 1,600 mm Axles and suspension: Disc brake 430 mm "off-road version" JOST (formerly DCA) axle units, 3 x 9 tons, with air suspension, air bellows arranged centrally to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board info center, lifting/lowering valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approx. 60% tread, with steel rims 11.75 x 22.5 ET 120, UNI wheel bolts, aluminum rims Kingpin: 2" - screwed into an 8 mm thick plate "light" Landing gear: Landing gears with two speeds, 2x 20 tons support load. We use swivel feet for air suspension. Braking system: According to E.E.G. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability System), Wabco Smartboard info center, Aluminum air tank system Electrical system: According to the guidelines of the STVZO (German Road Traffic Licensing Regulations) with 2 five-chamber lights, type Aspöck, 24-volt system with 2x 7 and 1x 15-pole socket with side marker lights, 2 sep. LED reversing lights Lrjdpfj Adxg Eox Ab Asu 1 LED inside on the front wall All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump bed: Fully welded interior Aluminum dump bed, side walls made of 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide, bottom made of 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall reinforced, 4 mm, in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALU round profile for sealing the door gap welded to the rear doors on the side and bottom, rear doors partially covered with smooth aluminum, operation of the universal door automatically-pneumatically with a separate lever that can be locked, rear support outriggers made of ALU, swiveling, two tie-down straps with rubber buffers attached to the frame on the front wall of the tipping bed, Hydraulic system: Tipping cylinder with "small" housing Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufacturer Edbro with approx. 2.5 m hydraulic hose and coupling half 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder made of aluminum, side underrun protection on the right in a foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additional centrally mounted support holder for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr./m2 quality with tarpaulin system, circumferential rubber cord in the rear end of the tarpaulin to be attached with two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord to prevent water ingress, robust foldable underrun protection made of aluminum, 2 "Clear- Pass" splash guards on the fender according to EG standard, an aluminum grain chute with a tarpaulin bag attached to the side

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 49 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and suspension: 430 mm disc brake "off-road version" JOST (formerly DCA) axle assemblies, 3 x 9 tons with air suspension, air bellows in a central arrangement on the chassis longitudinal member. 1st axle can be lifted with starting aid and manual forced lowering, Smart Board infocenter, lift/lower valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approximately 60% tread, with steel rims 11.75 x 22.5 ET 120, universal wheel bolts for aluminum rims Kingpin: 2" screwed into an 8 mm thick plate "light" Landing gear: Landing gear with two speeds, 2x 20 tons support load for air suspension, we use swivel feet Braking system: According to E.E.G. standard, dual-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, Aluminum air tank system Lrsdj Adxg Sopfx Ab Aju Electrical system: According to STVZO guidelines with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x 15-pole socket with side marker lights, 2 separate LED reversing lights 1 LED work light inside at the front All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump body: interior fully welded Aluminum dump body, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide, welded, floor 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall 4 mm thick, reinforced in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALURound profile for sealing the door gap on the rear doors, welded on the side and bottom, rear doors partially clad with aluminum, operation of the universal door automatically-pneumatically with a separate lever, lockable, rear supports made of aluminum, swivelable, two lower retainers with rubber buffers on the tipping body attached to the frame on the front wall Hydraulic system: tipping cylinder with "small" housing, suspension Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufactured by Edbro with approximately 2.5 m hydraulic hose and male coupling 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder, aluminum, side underrun protection on the right in foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additionally, a centrally mounted support receiver for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas, quality approx. 660 g/m2 with tarpaulin system, continuous rubber cord in the rear end of the tarpaulin to be attached to two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord against water ingress, robust foldable underrun protection in aluminum, 2 "Clear- Pass" splash guards on the fender according to EC standard, an aluminum grain chute with tarpaulin bag attached to the side on the frame, holder for shovel, broom and scrape

Condition: used, mileage: 6,200 km, power: 115 kW (156.36 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: automatic, number of seats: 3, loading space length: 2,900 mm, loading space width: 2,100 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Subframe: Stable, lightweight aluminum construction. Longitudinal and transverse beams made of aluminum. Subframe connected to the chassis according to the truck manufacturer's guidelines. External frame with lashing points. Floor: Consisting of 18 mm thick vehicle construction panels, with a film coating on the underside to prevent moisture penetration, and a non-slip screen-printed texture on the top. The panels are laid flat and sealed around the perimeter. Front wall: Closed with corner posts extending to under the roof, filled with aluminum hollow profiles. Side walls: Equipped with a PentaWave sliding tarp system, which is supported both at the top and bottom in specially shaped profiles. The sliding rollers inside allow the side walls to be moved effortlessly. These can be easily and quickly closed using the integrated tensioning system. Rear wall: Open, prepared for the installation of rear doors (see special versions!). Lredpfx Aszhdldjb Asu Roof: Fixed roof, consisting of clamped crossbars in a 400 mm grid, with a tarp above. Impact protection: Aluminum strip attached to both sides to guide the Penta-Wave system. Accessories: 1 set of mudguards including mud flaps Holder for wheel chocks Red position lights above the rear portal on the left and right, as LEDs 3rd brake light in the center above the rear portal doors, as an LED Contour marking according to ECR R48, white on the sides and red at the rear, strip width 55 mm Load securing with KIM system 3 rows of Ancra Jungfalk with TRS locking bars KIM 5 x 7 cm (ceiling-guided) with horizontal spring telescopic rods 3 additional locking bars KIM 5 x 7 cm (without ceiling guidance). Mounting of barrier bars to the additional locking bars on the right and left made of aluminum square tube for load securing in the longitudinal direction. Interior lighting 1 LED light strip, centered in the body, including connection to the driver's cab switch. Two-wing rear door Made of aluminum sandwich panels with internal rotary latch closures. The doors have a smooth surface (optimal for lettering). Drop-down brackets for hole rows in the outer frame 4 pieces per side, mounted with a flap and stop nut (more can be installed upon customer request). Side impact protection Side flank protection, brackets galvanized and foldable, planks anodized. Rear view camera Rear view camera including connection to the monitor or navigation system installed by the truck manufacturer. If you have any questions about this vehicle, please contact Mr. Markus Müller:

Condition: ready for operation (used), Step feeder , board and plank singulator. Lrodpfxez Uu Ino Ab Asu Suitable instead of board elevators and unscramblers.

Condition: used, maximum load weight: 29,460 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2024, next inspection (TÜV): 12/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, Equipment: ABS, Overall length 13830 mm Platform inner length 13620 mm Overall width 2550 mm Platform inner width 2480 mm Inner width between stringers 2480 mm Inner width between longitudinal members (without lift roof) 2480 mm Lateral loading height with lift roof and interior height 2950 2785 mm Wheelbase 1310 mm Saddle height 950 mm Kingpin height 80 mm Platform height 1030 mm Distance kingpin - 1st axle 6390 mm Number of Euro pallets 34 Technically permissible axle load 9000 kg Technically permissible saddle load 15000 kg Overall height 4015 mm Chassis Floor made of screen-printed plywood, 30 mm, load capacity 7.5 tons Lamp bracket made of steel Pallet stop with lashing eyes Rubber bumper at the rear Composite side underrun protection Fixed rear underrun protection NEW steel rear underrun protection Number of axles: 3 Fixed axles First axle as lift axle BPW disc axles, 3x9000 kg load capacity, 19.5 ECO PLUS, 3 clamps, BPW ET=120 Saddle height 950 mm Outriggers SAF Hercules 2-speed gear outriggers, full load Fenders PVC fenders, 2 front, 6 rear 6x steel rim 19.5-14 ET-120 Tires 6x tires 445/45.19,5 Other chassis equipment Toolbox 165 L Ljdpfx Absz Rruds Asru Superstructure Interior height 2950 Superstructure Decking planks - 4 rows 1st row aluminum decking planks H=100 mm, 8 pcs. Side tarpaulins with 24 tensioning straps Lift roof (0, 50, 100, 150) Aluminum front wall Front wall underrun protection (metal plate) H=1500 mm 2nd row aluminum decking planks H=100 mm, 8 pcs. 3rd row aluminum decking planks H=100 mm, 8 pcs. 4th row aluminum decking planks H=100 mm, 8 pcs. Tensioning straps for tarpaulin at the front Tarpaulin tensioning system at the rear Tensioning straps with additional locking mechanism Sliding tarpaulin, openable on both sides, EDSCHA HYBRID Without theft protection Without planks on the floor Rear wall as aluminum double-wing door Braking system/Pneumatics Braking system with Basic Modulator with RSS/RSP Steel air tank Chassis painting Chassis painting RAL 7021 (black-grey) KTL coating Tarpaulin color Side tarpaulin color Polplan 018 ~ RAL 9006 (silver) Roof tarpaulin white Electrical system 2x7-pole, 1x15-pole with EBS connection, without connection cables to the central control unit Lighting Hella LED EASYCONN Version DC 9.5 version Certificates/Homologation XL certificate DC 9.5 certificate Beverage certificate All information without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: used, mileage: 200,000 km, power: 375 kW (509.86 HP), first registration: 05/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,370 mm, loading space height: 850 mm, Year of construction: 2020, Equipment: ABS, air conditioning, navigation system, * Mercedes Arocs 2851 MP5, two-sided tipper with Bordmatic and hydraulic flap * First registration: 2020 * 200,000 km * Euro6D Lsdpfxszhznie Ab Ajru * 6 x 4 * Leaf spring - air suspension * Automatic climate control * Retarder * Trailer coupling * Camera * Plank Thaur body * 4.90 x 2.37 x 0.85 m * Unladen weight: 13,910 kg * Gross vehicle weight: 28,000 kg * 12,015 kg payload at 26,000 kg * Wheelbase: 3.35 m ---- Special equipment: Storage compartment above the windshield with a lid, front axle load 9.0 t, step with handrail on the roof, two-part exhaust system, batteries arranged one above the other, bi-xenon headlights, CB radio, interactive cockpit multimedia system, air horns (2) on the cab roof, cab: steel-sprung, comfort, suspension: front springs 9.0 t, 4 leaves, remote online function, additional parking brake on the front axle, speed limiter, 12-speed transmission - type: G 330-12, rear axle bevel gear 300, interior filter for construction vehicles, fuel tank: 290 liters, aluminum, left, cool box/refrigerator, air intake from the front, illuminated Mercedes star, reinforced engine brake, navigation system, programmable special module, wheelbase variant 3300 mm, frame overhang 900 mm, smoker's package, retarder, acoustic reversing warning (external warning signal), rear window, headlight cleaning system, additional key with remote control (2), circuit breaker, seat cover/upholstery: passenger seat, velours, seat cover/upholstery: driver's seat, velours, seats in the cab: armrests on both sides of the passenger seat, seats in the cab: driver's seat, comfort sprung seat, external sun visor, steel rims 11.75x22.5 (on the front axle), additional 24V socket in the passenger footwell, door extension for the cab, preparation for work lights on the rear cab wall, preparation for 4 surround cameras (display in the on-board monitor), preparation for a rotating beacon, additional thermal insulation, oil cooler for the transmission Additional equipment: Emission standard EURO 6, axle configuration: 6x4, heated exterior/front mirrors, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pole, Arocs 5, exhaust to the right side, battery 170 Ah, compressed air connection in the cab, compressed air tank, steel, compressed air unit with condensate monitoring, compressed air unit, medium, automatic switching for headlights (light sensor), cab: cab entrance, movable, cab: hydraulic tilting device, cab: M ClassicSpace, 2.30 m, tunnel 170 mm, electric windows, tinted windshield, generator 100 A, urea tank (AdBlue): 60 liters, manually operated sunroof (steel), body/superstructure: chassis for tipper, comfort locking system, steering assistance pump, unregulated, steering wheel with multi-function, steering oil cooling, air compressor 2-cylinder, heated air dryer, engine 12.8 liters - 375 kW R6 diesel (OM 471), engine variant OM 471, auxiliary drive MB 131-2c, type of use: local transport, wheelbase not defined, frame lowering without air spring residual pressure regulation, ramp mirrors, waste heat utilization, disc brakes with full protection, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: passenger functional seat, front axle stabilizer, steel rims 9.00x22.5, 12V socket in the passenger footwell, front bumper corners in steel design, tachograph / EG control device, Truck Data Center 7 (fleet management system), fixed rear underrun protection, preparation for toll collection, preparat

Condition: used, empty load weight: 1,920 kg, maximum load weight: 4,980 kg, overall weight: 6,900 kg, axle configuration: 2 axles, first registration: 12/2015, next inspection (TÜV): 04/2027, loading space length: 4,100 mm, loading space width: 2,000 mm, loading space height: 350 mm, suspension: steel, tire size: 215/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, tandem axle, leaf spring suspension, ABS (anti-lock braking system), manual ramps, front support legs, rear support legs, height-adjustable drawbar, lashing points. Ljdpfjzw N I Asx Ab Ajru Superstructure: 2-axle low-bed trailer with folding ramps, KNO axles, drum brakes! Wooden plank floor! Loading height approx. 700mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, maximum load weight: 27,760 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2016, loading space length: 13,820 mm, loading space width: 2,480 mm, loading space volume: 92 m³, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Vehicle Information ? Cargo area length: 14040 mm ? Height: 4000 mm ? Width: 2550 mm ? Cargo area length (internal): 13820 mm ? Cargo area width (internal): 2480 mm ? Fifth wheel height: 1150 mm ? Permissible total weight: 36000 kg ? Unladen weight: 8240 kg ? 92 m³ Axles ? Mercedes axles with disc brakes ? 1st axle: lift axle ? Air suspension ? Aluminum outrigger supports ? Aluminum rims ? Wheel chocks ? Tire brand: 385/65 R22.5 Lsdpfx Ajz Ewxpsb Aeru Superstructure / Attachments ? Open side impact protection ? A-sign ? Plastic toolbox ? Platform Floor ? Smooth aluminum, 10 mm, 21 planks ? Stainless steel plate Lighting / Electrical System ? 6 round 3-chamber lights ? 6 work lights ? Remote control Paintwork ? Superstructure: RAL 5010 Enzian Blue ? Axle hub: RAL 3020 - Traffic Red ? Chassis: RAL 3020 - Traffic Red

Condition: used, Year of construction: 2008, color: blue, overall weight: 16,000 kg, maximum load weight: 15,999 kg, empty load weight: 1 kg, loading space volume: 57 m³, loading space width: 2,480 mm, loading space length: 7,700 mm, loading space height: 3,000 mm, first registration: 06/2008, axle configuration: 2 axles, total length: 7,700 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 41441 Ledpfszkrfksx Ab Asru Krone, WP 7.7 N3S-CS * Year of manufacture: 2008 * 7.82 (presumably meters) * Used tarpaulin * Fixed roof * Lashing eyelets in the outer frame (Multilock outer frame) * Pallet stop bar * Portal door * Profiled wooden planks * Suitable for rail transport – can be lifted with a crane * Other * Total weight: 16,000 kg * Tare weight: 1 kg * Payload: 15,999 kg * Permissible total weight: 16,000 kg * Internal dimensions: L=7700 mm, W=2480 mm, H=3000 mm * Internal volume: 57 m³ * Dimensions of corner brackets: E=5853 mm * Overhang dimensions: 983 mm * Pallet spaces: 19 * Krone WP 77 BDF Jumbo volume interchangeable box * Liftable roof Disclaimer: Subject to changes, prior sale, and errors. More images and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please ask our trained specialists; we will be happy to advise you.

Condition: used, Year of construction: 2008, color: blue, overall weight: 16,000 kg, maximum load weight: 15,999 kg, empty load weight: 1 kg, loading space volume: 57 m³, loading space width: 2,480 mm, loading space length: 7,700 mm, loading space height: 3,000 mm, first registration: 06/2008, axle configuration: 2 axles, total length: 7,700 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 41440 Krone, WP 7.7 N3S-CS * Year of manufacture: 2008 * 7.82 (presumably meters) * Used tarpaulin * Fixed roof * Lashing eyelets in the outer frame (Multilock outer frame) * Pallet stop bar * Portal door * Profile wood planks * Rail transportable - craneable * Other * Total weight: 16,000 kg * Unladen weight: 1 kg Ljdpfxjzkrfqe Ab Asru * Payload: 15,999 kg * Permissible total weight: 16,000 kg * Internal dimensions: L=7700 mm, W=2480 mm, H=3000 mm * Internal volume: 57 cubic meters * Dimensions of corner fittings: E=5853mm * Dimensions of overhang: 983mm * Pallet spaces: 19 * Krone WP 77 BDF Jumbo volume interchangeable body * Lifting roof Disclaimer: Subject to changes, prior sale, and errors. More photos and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transfer of commercial vehicles Please ask our trained specialists, we will be happy to advise you.

Condition: used, axle configuration: 3 axles, first registration: 06/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Body: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, made of galvanized steel up to the support structure (semitrailer construction, max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BWI) readable in the central control unit (CCU) (display), 1st axle with starting aid (new EC regulation, without CCU option). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on steel rims, silver, 11.75x22.5, offset 120. Kingpin: 2" kingpin bolted into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with pivoting foot. Braking System: According to EC standards, EBS E system Wabco with RSS (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lights, Aspöck Europoint 3 type, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-shaped protection. Body/Container: Body completely welded on the inside, reinforced side walls. Lredpsz S St Nefx Ab Aju Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum container, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt. Plank profiles completely welded on the inside. Floor as a sliding floor system laid on 140 mm ALU cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special ALU corner profiles in a beveled design. Smooth rear wall in a straight design with 2 ALU wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in a welded ALU rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving discharge wall with Kevlar cover, approx. 1,800 mm long, plus side Kevlar seal. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders, plus anti-lifting glide bearings, type CF, 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed stops on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed stops. Line size NW 21. Fixed stops with a size and design to be specified. Operating pressure 190-max. 240 bar. ALU end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, waterproof box. Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU wheel chock, side ALU impact protection in a folding design, 1 toolbox approx. 860x460x400 mm in p

Condition: used, Year of construction: 2008, color: blue, overall weight: 16,000 kg, maximum load weight: 15,999 kg, empty load weight: 1 kg, loading space volume: 57 m³, loading space width: 2,480 mm, loading space length: 7,700 mm, loading space height: 3,000 mm, first registration: 06/2008, axle configuration: 2 axles, total length: 7,700 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 41436 Krone, WP 7.7 N3S-CS * Year of manufacture: 2008 * 7.82 [presumably meters] * Used tarpaulin * Fixed roof * Lashing eyelets in the outer frame (Multilock outer frame) * Pallet stop bar * Portal door * Profiled wood planks * Suitable for rail transport - can be lifted with a crane * Other * Gross vehicle weight: 16,000 kg * Tare weight: 1 kg * Payload: 15,999 kg * Permissible gross vehicle weight: 16,000 kg * Internal dimensions: L=7700 mm, W=2480 mm, H=3000 mm * Internal volume*: 57 m² Ljdpfx Abezlxd Nj Aoru * Dimensions of corner brackets E=5853 mm * Dimensions of overhang: 983 mm * Pallet spaces: 19 * Krone WP 77 BDF Jumbo volume swap body * Lifting roof Disclaimer: Subject to changes, prior sale, and errors. More photos and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists; we will be happy to advise you.

Condition: used, Year of construction: 2011, operating hours: 1,218 h, lifting height: 3,300 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Hyster H2.5FT diesel forklift, year of manufacture: 2011, hours: only 1,218!, previous owner: German Armed Forces, rated load capacity: 2,500 kg, lift height: 3,300 mm, duplex mast, fork length: 1,200 mm, fork extension: 1,800 mm, diesel engine [36 kW/48 hp], weight: 4,180 kg, ready for immediate use! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Cabin Lsdsz Nux Aspfx Ab Ajru = Further information = Lifting capacity: 2,500 kg Overall height: 220 cm Please contact Tobias Ebert for further information.

Condition: good (used), mileage: 104,303 km, power: 125 kW (169.95 HP), first registration: 07/2022, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,200 mm, total width: 2,350 mm, total height: 3,300 mm, loading space length: 4,400 mm, loading space width: 2,220 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electric window regulation, tail-lift, traction control, = Additional Options and Accessories = - Halogen lamp - None - Tail lift - Manual - Radio/cassette player - Vinyl upholstery = Notes = Configuration: 4x2, Tare weight: 2834 kg, Gross vehicle weight: 3500 kg, Cab type: Single cab, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Radio/cassette player, Color: White, Lighting type: Halogen lamp, Climate control, Engine power: 125 kW (168 hp), Engine displacement: 1950 cc, Fuel: Diesel, Euro standard: 6, Drivetrain: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and lengthened, Side panels, Roof rack: None, Side doors: 1, Rear closure: Tail lift, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat upholstery: Vinyl, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 750 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 226x160, Box van with tail lift, side door, automatic transmission, spoiler, staggered seating, paneled, 170 hp, Euro 6!, Spare wheel, Spare wheel tread depth: 4%, Tire type: Summer tires = Additional Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Lredezrlrmspfx Ab Aju Weights Unladen weight: 2,834 kg Payload: 666 kg GVW: 3,500 kg Functional Tail lift: Dhollandia, Rear door, 750 kg Loading platform height: 92 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €538 per month (van, 72 months); Please inquire for more information and conditions.

Condition: good (used), Bandsa for re-sawing blocks and planks type Canali multiline ML 1100 with 3 band saw units Sawpully, width 105 mm, max width of saw blade 120 mm. Speed of the bandsaw blade 28/32/36/42 m/sec Ledpfx Ajz Hbh Dsb Asru Feed-work has below measurements. - Height of feed rollers 200 mm - Diameter of feed rollers 100 mm - Max opening saw blade to anvil side 230 mm - Max opening saw blade to pressure side 230 mm - Max opening Center cut 460 mm

Condition: used, maximum load weight: 13,330 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, loading space length: 6,150 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, Year of construction: 2026, Equipment: ABS, - 2 steerable axle sets ECO/low-maintenance with disc brakes, each with a load capacity of 9,000 kg - Dual-circuit EBS pneumatic braking system according to EC guidelines, with ALB control and parking brake as a spring-loaded accumulator, automatic linkage adjusters. Duomatic brake connection - Air suspension with raising and lowering function - Chassis: Stable welded construction made of high-strength fine-grained steel sheets, formed and welded to prevent twisting. The longitudinal and transverse beams form a single plane with the main frame. - Tires: 4 x 385/55 R22.5 on steel rims - Fixed drawbar with DIN towing eye 40 mm (length-adjustable drawbar) - Electrical system: According to StVZO guidelines, in a protected installation, 5-chamber tail lights integrated into the underrun protection, Euro plug, 15-pin socket, 2 red position lights above the rear portal. ABS with connection cable. 1 marker light mounted on each side of the rear frame. - Floor: Made of 24 mm thick vehicle construction panels, film-coated underneath to prevent moisture penetration, with a non-slip screen-printed texture on top, laid flat and sealed around the edges. - Front wall: Made of special vehicle construction plastic panels, closed up to the roof, with a central strut laid flat. Without a front wall cover at the top front. - Side walls: ZIKUN flap swivel mechanism, continuous sideboard, horizontally divided. By folding down the lower sideboard, the upper wall is mechanically swung onto the roof. The lever kinematics, supported by a spring pull, is attached to the front wall. Sideboard upper parts made of special aluminum composite panels, 25 mm. - Fixed roof consisting of steel stringers with permanently glued aluminum sheets, powder-coated in white RAL9010 on the outside - Steel impact rail welded on both sides as a forklift protection. Rubber impact buffer mounted at the rear under the rear door - PVC quarter fenders on the axles - 1 set of mud flaps for the fenders Lrjdpfxszp Ak Us Ab Aou - 2 wheel chocks with holder - Lateral underrun protection, galvanized and foldable brackets, aluminum planks with rounded end pieces - Continuous splash guard under the underrun protection at the rear - Complete body sandblasted, primed and painted in a single color - Chassis: MAN graphite black - Outer frame and body: RAL 9010 pure white - Inspection 60001-0002 TÜV approval trailer/semi-trailer - Drawbar fork length-adjustable - Central lubrication strip for slewing ring and drawbar - 2-leaf rear door made of aluminum sandwich panels with internal rotating bar locks. The doors have a smooth surface - Clad the front wall in the lower area with a 280 mm high aluminum profile as impact protection. - 2 x retractable access steps in the lower part of the folding wall on the left and right, approx. 600 mm long - Integrated cargo securing system with CRS system (4 rows) in the roof and floor, including 4 load securing bars with 6 horizontal spring telescopic rods (CRS system Ancra-Jungfalk, Dekra tested according to VDI 2700 Code XL) - Interior light as an LED spotlight, switched via parking lights, with a separate switch - Additional interior lighting as an LED spotlight mounted at the rear - 2 x pallet stopper on the left and right - Tire pressure monitoring system according to ECE R 141 - Additional camera on the trailer for rear view video system, camera at the rear above the rear door

Year of construction: 2020, condition: ready for operation (used), Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details. • General system data: • Nominal width: 680 mm • Maximum printing width: 548 mm (expandable to 680 mm) • Maximum panel width in OFS: 510 mm • Working height: 900 mm (+50 mm) • Processing: printing and top coating from above, counter-coating from below • Operating mode: dual-lane up to max. 255 mm part width; otherwise single-lane • System speed: 8–65 m/min • Printing speed: up to 50 m/min • Jupiter digital printing unit (JPT): • Number of colors: 4 • Printheads per color: 8 (max. 10 possible) • Free slots for additional colors: 6 • Printhead type: XAAR 2001 • DLE structure printing unit: • Print rows: 1 • Printheads per row: 8 (max. 10 possible) • Free slots for additional rows: 1 • Total printheads: 8 • Printhead type: XAAR 1003 • Raw panel specifications: • Length: 600–2800 mm • Raw mother-board width before longitudinal ripping: 900–1260 mm • Panels are longitudinally divided prior to digital printing and coating operations Lrsdpfx Abozugz Ue Asu • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Cutting format saw: • Longitudinal ripping system with up to 5 saw cuts plus 2 trimming units for production of finished plank widths from 160–510 mm • Finished panel specifications: • Length: 600–2800 mm • Width: 160–510 mm • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Feeding system (infeed): • Type: vacuum portal • Feeding stations: 2 • Discharge positions: 1 • Max feeding capacity: 8 cycles/min; with double stacking: 16 panels/min • Identical stacks per station: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm • Max stack weight: 5000 kg (combined) • Design: without pits • Transport mode: protective plate or pallet • Protective plate (infeed): length 800–2800 mm; width 1000–1260 mm; thickness 20–30 mm (up to 150 mm for pallets); max 80 kg per plate/pallet • Stacking system (outfeed): • Type: drop shaft • Stacking positions: 1 • Max stacking capacity: 30 cycles/min • Identical stacks per position: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm (alternative: 1000 mm) • Max stack weight: 5000 kg (combined) / Alternative stacking configuration maximum stack weight: 3500 kg • Design: with pits • Transport mode: protective plate or pallet • Protective plate feeding method: loading by forklift, separation by robot • Protective plate (stacking): length 800–2800 mm; width 1000–1200 mm; thickness 20–30 mm; max 80 kg per plate; material OSB or HDF • Process aggregates: • Number of aggregates: 35 • Process steps: feeding, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking • Application: • Industrial single-pass digital printing line for high-speed surface finishing of large panels (flooring and furniture), producing realistic wood, stone, or custom decors directly on substrates Additional equipment • Robot for protective plate separation at outfeed (as part of protective plate handling)

Condition: used, mileage: 141,967 km, power: 323 kW (439.16 HP), first registration: 12/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, color: yellow, gearing type: automatic, total length: 9,520 mm, total width: 2,550 mm, total height: 3,980 mm, loading space volume: 47 m³, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Renault 430D Wide 6x2 VIN: B002194 Chassis / Components: * Wheelbase: 4,750 mm // 1,350 mm * Leaf / Air Suspension * Lift Axle * Tires: 315/70 R22.5 * Remaining Tread Depth: Front approx. 80%, Middle 60/70%, Rear approx. 80% * 1 x Aluminum Tank * 1 x AD-Blue Tank * 1 x PVC Storage Box Cab: * Global-Cab, 2,300 mm * Roof Spoiler * Roof Hatch * Air Conditioning * Radio * BT, AUX, USB, DAB * Adaptive Cruise Control * Lane Departure Warning System * Camera, Side Camera Body: * Titgemeyer Tautliner, Year of Manufacture: 2021 * Side Curtain * Lashing Points Lrodpsz Sv Nusfx Ab Aju * Loading Area Dimensions: L x W x H: 7,300 mm x 2,480 mm x 2,600 mm * Volume: approx. 47 m³ * Aluminum Planks * LBW-Bär, Type: BC 2000S4-C4 * Load Capacity: 2,000 kg, Max. Pressure: 220 bar Engine / Transmission: * 439 HP // 323 KW // 10,837 cm² // Euro 6e * Optibrake+ * Optidriver // Automatic * Differential Lock Weights: * Gross Vehicle Weight: 26,000 kg * Unladen Weight: 10,160 kg * Payload: 15,840 kg Other: * German Vehicle * 1 Previous Owner * MOT valid until 12/2026 -- Inspection valid until 06/2027 * Top Condition ---- New main inspections / safety checks or weight adjustments are available upon request. We will gladly assist you in obtaining export / transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing & typographical errors, changes, prior sales and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a large number of vehicles. Our corporate philosophy is characterized by fairness and integrity. As we are very concerned about customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day license plates / Export license plates We will gladly help you in obtaining export license plates / short-term license plates. Processing of customs formalities We will gladly help you in processing customs matters.

Condition: excellent (used), functionality: fully functional, CUTTING , TRIMMING SAW machine for solid wood model MZ PROJECT LC 4000 automatic machine second hand machine CE regulation: YES end-cutting of boards using a motorized rear roller conveyor with automatic stop and an idle front roller conveyor lengthwise cutting of solid wood planks and panels mm.4000 . depth: mm.1500 with automatic pusher (CN). Maximum cutting width: mm.1500 conditions of use: Excellent. Lodpfxozdqxcs Ab Aeru maximum cutting length: mm.4000 motor power: Hp 15 total weight: kg. 3.000 volts: 380/50

Condition: used, mileage: 98,416 km, power: 132 kW (179.47 HP), first registration: 05/2019, overall weight: 7,000 kg, wheelbase: 4,100 mm, fuel: diesel, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, cruise control, onboard computer, power mirror, Special Features - 3-seater - Electric windows - Cruise control - Radio - ABS / ASR - Height- and reach-adjustable steering wheel - Electrically adjustable and heated mirrors L/R - Differential lock - Air conditioning - Power steering - Electronic immobilizer - Central locking with remote control - On-board computer - Twin tires - Reversing camera Superstructure France Elevateur 172 TPFcc - Working height: 17.00 m - Maximum outreach: 9.00 m - Slewing angle: 400° - Setup inclination: 5% / 15% - Steel carrier system with 2 extensions - Internal energy supply routing - Electro-hydraulic controls - Plastic work basket (1000 V insulation) - Ground controls (5 m cable) - Hour meter - Emergency pump - Hydraulic pump activation from driver’s cab - Basket arm rotation angle: 140° - Acoustic tilt warning system - 2 hydraulic outriggers - Engine start-stop function in work basket - LED beacon lights - 230V socket in the basket - 2 x 60° basket rotation - Power inverter 3600 VA Ledoy Ia Iqspfx Ab Aeru - Work basket (L/W/H): 1300 x 700 x 1150 mm The Iveco Daily with France Elevateur 172 TPFcc is an indispensable tool for telecommunications, electricity, lighting maintenance, as well as municipal services and painting work. Besides the diesel drive, the vehicle is also equipped with an electric drive, allowing the work platform to be operated fully emission-free. Once arrived at the job site, the electric drive can be activated so the platform can be stabilized electrically and without emissions. Iveco Daily with aerial platform 172 TPFcc – your reliable partner for working at heights! All functions of the access platform are fully operational and have been checked by our workshop. The vehicle is ready for registration. German documents, TÜV inspection, and statutory accident insurance (UVV) are included free of charge. Additional equipment such as tow bar, lighting, shelving, and more can be fitted upon request. Immediately available from our warehouse in Langenfeld! ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photographs taken in-house – ensuring total transparency regarding the actual condition of the vehicle. Our vehicles undergo a comprehensive reconditioning process in our in-house specialist workshop prior to sale – including mechanical, bodywork, and paintwork. This ensures they are optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – verification is even better: at your request, the vehicle can be inspected by independent expert organizations such as TÜV, DEKRA or KÜS – also available as a remote inspection. Our services for you: - Delivery of your vehicle to the location of your choice - Complete handling of export formalities, including export registration plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of special equipment as desired Looking for something specific? If you do not currently find a suitable vehicle for your company in our inventory, please contact us – we are always happy to help.

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR, approx. 100 cbm, 14.9 m internal length silver-grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal length of the body: +/- 14900 MM Internal width of the body: 2475 MM Volume of the body: approx. 98.6 cbm GVW: 36 T Wheelbase: 1310 MM Unladen weight: 8500 kg Saddle height: 1150 mm TECHNICAL DESCRIPTION 1. CHASSIS SADDLE HEIGHT The exact saddle height is 1150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 T Suspension: Original SAF air suspension Brakes: large disc Offset: ET 120 BVA: included The first axle is an automatic lift axle controlled via the EBS-E system. The third axle is a trailing steerable axle. CONNECTION BRAKE WEAR INDICATOR (BVA) Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. With starting aid. STARTING AID The starting aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION Lifting and lowering device. Aluminum air tank. LOCKING OF TRAILING STEERABLE AXLE Locking of the trailing steerable axle is done as follows: - via the rear lights - with a button in the truck (truck equipment not included) TIRES 6 x 385/65 R 22.5 tires for regional transport (manufacturer's choice) on aluminum rims ALCOA MATT. ET 120. BRAKE SYSTEM - EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-circuit compressed air brake system acc. to CE guidelines. Spring brake parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK 24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets ISO connection. Aspöck set. Orange LED lighting is mounted on the side of the trailer. Without distribution box at the rear - NORDIC. REAR LIGHTING IN THE UNDER RIDE GUARD The lighting is mounted in the fixed aluminum under-ride guard. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version. Ledpjxplxzsfx Ab Ajru HYDRAULIC CONNECTION Connection on the front wall. With additional connection option below the body in front of the support legs. ACCESSORIES RETRACTABLE LADDER REAR Retractable ladder integrated at the rear of the vehicle, on the right. PNEUMATIC CENTRAL LOCKING With pneumatic central locking. TOOL BOX PVC tool box with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER Aluminum spare wheel holder (single) 2. TIPPER BODY FRONT WALL The front wall consists of sturdy aluminum plank profiles. SEAL BETWEEN FLOOR AND FRONT WALL Fixed seal between the floor and front wall by means of an aluminum profile and PVC seal. SIDE WALLS Side walls in smooth design, inside and outside. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded together on the inside. WEAR PLATES Wear plate in aluminum, rectangular, on the inside at the rear, 2000 (L) x 1500 (H) x 4 mm. TIPPER FLOOR SYSTEM CARGO FLOOR CF 500 SL-C Electric operation. 21 slat system. Drive segment consisting of 3 hydraulically double-acting cylinders with a working stroke of 200 mm. End plate at the rear made of stainless steel. OPERATION OF FLOOR SYSTEM Electric operation - electrically with remote control (original Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation by means of a unique red Cargo rotary knob. TIPPER FLOOR FRAME Frame for wheelbase 7850 mm. 21 slats. FLOOR SLATS 21 aluminum slats - 8 mm ribbed with welded aluminum end caps. REAR DOOR 2 doors