Used Plan Type 80-8 for sale (67,711)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 06/2028, total width: 720 mm, total length: 1,050 mm, total height: 1,660 mm, input frequency: 50 Hz, electrical fuse: 16 A, power: 4.5 kW (6.12 HP), NEW +++ Planetary Mixer Planeto 80 L +++ NEW Professional machine with robust technology! For the best results! LED display 10 power levels and timer Interference protection / safety guard with protective circuit TOP mixer with the following tools: 1 whisk, 1 dough hook, 1 flat beater 1 80-liter stainless steel bowl Electric bowl lift Only available from us, DGUV V3 certified Connection 400V, 16A-CEE plug Dimensions: 720 x 1050 x 1660 mm, W x D x H New machine 24 months warranty + spare parts service Optional: 1 bowl trolley Maintenance contract Delivery service Instruction and commissioning Service package Leasing & rental service TOP quality and price in one machine! Gbsdpfx Aeu Amdajbgon Your partner with added service!

Condition: new, new ! all stainless steel 2 speeds 2 mixing directions 1,8 kW – 2,5 kW safety lid Suitable for loader with “Easy Connect” Easy clean Hinged safety gard CE-approved overall dimensions (l x w x h) : 1.676 x 830 x 1.428 mm (open lid: H: 1.985 mm) The Barmix 180 litre twin shaft paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood the mixer is ideal for mixing many products that are free flowing and easy to move around. The Barmix 180 features a special paddle shaft arrangement with one slightly higher than the other to give a more effective and quality mix. The effective mixing action with high peripheral wing speed gives good protein extraction and uniformed distribution of spices, additives and liquids. Gbodpfoy Tuq Dsx Abgjn Also the Barmix 180 Litre Mixer produces a gentle mixing action which reduces particulate destruction maintaining the product structure and its original quality.

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Gbedpfjy Ryr Isx Abgjn Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Condition: used, functionality: unexamined, Neugart WPLE 80 right-angle planetary gearbox – i=15 – industrial gearbox Description For sale is a compact and powerful right-angle planetary gearbox from Neugart GmbH. The WPLE series belongs to the proven “Economy Line” and is specifically designed for space-saving applications with right-angle power transmission (90°). The gearbox impresses with its high efficiency, low noise level, and low-maintenance operation. Ideally suited for: Automation technology Gbsdpfoy Tw E Djx Abgon Mechanical engineering / special machines CNC and handling systems Conveyor technology and positioning applications Technical data Manufacturer: Neugart Type: WPLE 80 Gear ratio: i = 15 Size: 80 Design: Right-angle planetary gearbox (90°) Lubrication: lubricated for life Mounting: any mounting position possible Condition Used Optical condition: see images Functional condition: unknown (not tested) ⚠️ Important note Sold expressly without functional testing Sold without warranty Ideal for DIY enthusiasts, spare parts recovery, or refurbishment Special features Compact design with high power density Good price-performance ratio Maintenance-free due to lifetime lubrication Suitable for servo drives Scope of delivery Gearbox as shown in the images Without motor and accessories

Year of construction: 2020, condition: like new (used), functionality: fully functional, conveyor belt length: 95,000 mm, Tunnel Type Enamel Cooking Ovens are based on the principle of hanging the workpiece to be fired on the oven conveyor and firing at maximum 1200C. These types of furnaces are internally rotating furnaces, after the workpiece is hung on the conveyor (maximum gross output 1 000 kg/h), it is provided to be fired (firing zone 10meters) or dried while traveling at a certain speed according to the thickness and m2 area of the part. Tunnel Type Enamel Cooking and Drying Ovens are specially designed with our expert engineering staff. Our Tunnel Type Enamel Cooking and Drying Ovens are also manufactured as assembled. Thanks to this feature, it can be easily assembled and moved to other areas if desired. In the industry, it is preferred by high-capacity production enterprises. Gbodpevcdr Djfx Abgen

Condition: ready for operation (used), Year of construction: 2019, cutting length (max.): 4,300 mm, cutting depth: 4,300 mm, This MAYER Otto Meyer Type PS80P was manufactured in 2019. A robust panel saw with a cutting length and width of 4300 mm each, powered by a 9 kW main motor. Features include optimized travel speeds via an additional frequency converter and an automatic electronic clamping detection for panel corners. Consider the opportunity to buy this MAYER Otto Meyer Type PS80P panel saw. Contact us for more information. • Main motor power: 9 kW • Optimized travel speeds of the main saw via additional frequency converter • Automatic electronic clamping detection for detecting panel corners • Note: The technical data and descriptions are copies of the order confirmation at the time. Data is for information purposes only and is not binding. Additional equipment Gedoygw Auopfx Abgjbn • Label printer

Condition: new, Year of construction: 2026, functionality: fully functional, CONSTMACH stationary stone crushing plants are designed with a focus on high efficiency and durability, offering long-lasting industrial solutions. Each plant is specifically configured based on the hardness and abrasiveness of the material to be crushed and the desired product size. With production capacities ranging from 50 t/h to 1,000 t/h, they perfectly adapt to projects of different scales. The crusher types used in the plants are selected according to material properties to achieve maximum performance. Our design team creates optimized 3D layout plans using feeder, crusher, screen, bunker, washer, and conveyor components. This ensures high capacity, low energy consumption, and minimal maintenance costs throughout the production process. Each plant is custom-designed to suit the investment budget and operating conditions. Our engineering team offers the most suitable projects and proposals to prevent unnecessary expenses. CONSTMACH stationary crushing and screening plants are equipped with high-quality electronic components from SIEMENS and SCHNEIDER, and minimize operator intervention thanks to a PLC-based fully automated system. This provides safe, fast, and stable production. Fixed Stone Crushing Plant Technical Specifications Production Capacity: 50 – 1,000 t/h Type of Material to be Crushed: Varies according to the desired product type Final Product Dimensions: Adjustable upon request Crusher Types: Jaw, impact, cone, or vertical shaft crusher options Why Choose a Fixed Stone Crushing Plant from CONSTMACH? Gbodpexpkf Hofx Abgen CONSTMACH makes a difference with its engineering approach that offers customized solutions to each customer. Our plants operate continuously for many years thanks to high-quality components, energy-efficient designs, and reliable automation systems. With our after-sales support service that prioritizes customer satisfaction, we are by your side at every stage of your investment. CONSTMACH is the right choice for fixed rock crushing plants offering powerful performance, low operating costs, and maximum efficiency. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 370 kW (503.06 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: ABS, cabin, hydraulics, The CONSTMACH JCV-1 mobile crushing plant is a three-axle mobile system specifically designed for professional crushing and screening plants seeking high capacity and superior performance. The CV-1 provides maximum efficiency in crushing high-hardness rock types such as granite, basalt, dolomite, and similar materials. It is also an ideal solution for producing high volumes of fine material and achieving excellent cubic-shaped aggregate. The plant is based on sophisticated engineering, long-lasting components, and the durability that comes with CONSTMACH quality. The JCV-1 system consists of a combination of a mobile jaw crusher, a cone crusher, and a vertical shaft impact crusher (VSI) unit. This structure allows material to be obtained in five different fractions simultaneously. The PLC-controlled automation system is equipped with SIEMENS and SCHNEIDER brand electronic components, and the plant can be managed from a single tablet. Its modular and portable design makes it compliant with international road transport standards. The hydraulic foot system allows for easy installation and commissioning. Optional diesel generator options can also meet energy requirements on site. JCV-1 Mobile Crushing and Screening Plant Technical Specifications Production Capacity: 60-80 tph Maximum Feed Size: 610 x 380 mm Main Configuration: Jaw Crusher + Cone Crusher + VSI + Vibrating Screen Total Motor Power: 370 kW Electric Generator Requirement: 750 kVA Plant Weight: 90 tons (total) Dimensions: 1. Chassis – 10 (L) x 3.1 (W) x 4.4 (H) m 2. Chassis – 17 (L) x 3.8 (W) x 4.4 (H) m 3. Chassis – 17 (L) x 3.8 (W) x 4.4 (H) m Gbodpfx Abjxpvz Tjgon Chassis Type: Hydraulic folding legs, three wheeled chassis Why Choose the CV-1 Mobile Jaw Crusher? CONSTMACH CV-1 is an excellent choice for users seeking maximum efficiency and flexibility in mobile crushing plants. Its easy transportability, short setup time, and advanced automation technology save time and labor. While offering reliable performance for years with its high-quality components, its user-friendly design minimizes maintenance and operating costs. If you are looking for high-quality material production, durability, and engineering excellence, experience the CONSTMACH difference in the field with the CV-1 Mobile Jaw Crusher. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Year of construction: 1990, Offer 25210 Godpewwi R Hjfx Abgobn Technical data: - Load capacity: 8,000 kg - Both axles steerable / all-wheel steering (knuckle steering) - Tow bar usable at both front and rear sides - Solid rubber tyres: 425 / 150 - 305 - Platform length approx.: 2,500 mm - Platform width approx.: 1,250 mm - Platform height approx.: 500 mm - Total length without tow bar: 3,300 mm - Total length with tow bar approx.: 4,400 mm - Weight approx.: 700 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Lintec 80 t/h Mobile Asphalt Mixing Plant - Year of manufacture: New - Capacity: 80 t/h - Cold feed: 3 x 6 m³ Gbjdpfjylqfaex Abgen - Drying drum - Towing conveyor for loading trucks - Dust separator: Dry system with Nomex bag filters; filter area: 370 m² - Mixer: Carbon steel sheet housing, heated cabinet with thermal oil, wear-resistant internal coating, sealing caps, and inspection openings - Control room with fully automatic software and manual mixing console - Mobile tank: 60,000 l (40,000 l bitumen / 20,000 l fuel) available at extra cost

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: Fanuc Series 18i-TB, number of axes: 5, CNC Swiss-type automatic lathe with main and sub-spindle! TECHNICAL DETAILS Gbodpfx Aow Eb Hcsbgjn Machining Data Bar diameter: max. 16 mm Turning length: max. 205 mm Spindle speed: max. 6,000 rpm Number of axes: 5 Control Control manufacturer: FANUC Control model: Series 18i-TB MACHINE DETAILS Weight: 1,650 kg EQUIPMENT Main spindle Sub-spindle 8 tool stations for side machining 2x 4 tool stations for rear and face machining 3 driven tool stations Small parts discharge conveyor Bar feeder: FMB Minimag 18 (bar length: 3,200 mm) Coolant system: Oil

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: FANUC Series 18i-TB, number of axes: 5, CNC Swiss-type automatic lathe with main and sub spindle! A similar machine was recently auctioned successfully! TECHNICAL DETAILS Machining data Max. bar diameter: 16 mm Max. turning length: 205 mm Max. spindle speed: 6,000 rpm Number of axes: 5 Bar length: 3,200 mm Control system: FANUC Series 18i-TB MACHINE DETAILS Weight: 1,650 kg EQUIPMENT Main spindle Sub spindle 8 tool stations for side machining 2x 4 tool stations for rear and face machining Gbedpfxow Uip Aj Abgjn 3 driven tool stations Small parts discharge conveyor Bar feeder magazine: FMB Minimag 18 Coolant system: Oil

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 3085, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: FANUC Series 18i-TB, number of axes: 5, CNC Swiss-type automatic lathe with main and sub spindle! TECHNICAL DETAILS Machining Data Maximum bar diameter: 16 mm Maximum turning length: 205 mm Maximum spindle speed: 6,000 rpm Number of axes: 5 Bar length: 3,200 mm Control: FANUC Series 18i-TB MACHINE DETAILS Gedpfx Asw Echnebgobn Weight: 1,650 kg EQUIPMENT Main spindle Sub spindle 8 tool positions for side machining 2x 4 tool positions for rear and face machining 3 driven tool stations Small parts discharge conveyor Bar feeder: FMB Minimag 18 Coolant system: oil

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1673, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: FANUC Series 18i-TB, number of axes: 5, CNC sliding headstock automatic lathe with main and sub spindle! TECHNICAL DETAILS Machining data Godpsw Uim Iofx Abgsbn Max. bar diameter: 16 mm Max. turning length: 205 mm Max. spindle speed: 6,000 rpm Number of axes: 5 Bar length: 3,200 mm Control: FANUC Series 18i-TB MACHINE DETAILS Weight: 1,600 kg EQUIPMENT Main spindle Sub spindle 8 tool stations for side machining 2x 4 tool stations for back and face machining 3 driven tool stations Small parts discharge conveyor Bar feeder: FMB Minimag 3200 A

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Ideal for building demolition shears, scrap shears, and branch shears -Connections via the piston rod -Piston diameter: approx. 150 mm -Piston rod diameter: 80 mm -Stroke: approx. 420 mm -Total length extended: 1800 mm -Ideal for machines where the piston rod needs to be protected. -Quantity: 6 pieces available -Price: per piece Gsdob A Hufepfx Abgsbn

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Features and technical data: - For construction drilling horizontally and vertically - For vertical row drilling with 32 mm spacing - Vertical drilling unit with freely positionable double spindle drill heads on index shaft - 1.5 kW motor with 1400 rpm - 1.5 kW motor with 2800 rpm - Drill heads with pneumatic stroke Gbjdpfx Ajwka Hfebgsn - Pneumatic material clamps - Pass-through width approx. 850 mm - Includes various stops and drill bits Availability: short notice Location: Röllbach

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Gbjdpfxsy S Ru Ae Abgsn Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1994, Overview  The Centrifugal Separator Type SB80-06-076 from the manufacturer GEA Westfalia was previously used at a brewery in Estonia. Due to a complete shutdown of the production plant, this unit is for sale. Till closing of the factory, the separator was used frequently. Tech Specs  4500 rpm with self cleaning drum Accessories  Spare Parts Tools Gbjdpfxjv N Hcxe Abgon

Condition: used, continuous teflon belt grill suitable for thermo oil heated with lower and upper belt - bottom and top grilling belt width 600 mm adjustable speed product height electrically adjustable nett frying length 6.800 mm total length 9.300 mm total width 1.500 mm weight : 5.700 kg Gsdpjy R Rvqjfx Abgsbn

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 80 t, stroke length: 600 mm, table width: 600 mm, table length: 800 mm, throat depth: 300 mm, Equipment: CE marking, documentation/manual, safety light barrier, 80 Ton C-Frame Hydraulic Press – CHCP 80 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CHCP 80 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, delivers reliable performance in medium and heavy-duty applications thanks to its robust frame, high capacity, and precise operating capability. Key Advantages - Rigid and vibration-free steel construction frame - High precision (≤120 microns/meter) - User-friendly PLC control system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long lifespan and low maintenance costs Fields of Application - Metal forming - Deep drawing and forming operations - Cutting and punching operations - Assembly and pressing tasks - Automotive and related industries Standard Features - Stress-relieved steel construction frame by vibration method - PLC control and touch panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances according to ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand operation control system - Cooling system Gjdpoyzb Dtofx Abgebn Technical Specifications – CHCP 80 - Press Force: 80 Tons - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 600 x 800 mm - Press Depth: 1200 mm - Press Width: 600 mm - Table Height from Floor: 900 mm - Total Height: 2600 mm - Main Cylinder Diameter: Ø200 mm - Motor Power: 15 kW - Weight: 6500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, power: 5.5 kW (7.48 HP), pressing force: 80 t, table width: 660 mm, table length: 860 mm, punching force: 80 t, drop-through hole in table: 180 mm, stroke adjustment: 110 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates via a force generated by an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for mass production. Key Advantages: - Stable stroke performance and high repeatability in serial production Gsdpfx Abevtx H Rogjbn - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot control Typical Applications: - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided guided slide • Spheroidal graphite cast iron connecting rod and gear bushings • Crankshaft and transmission shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Double-coil safety valve • Manually adjustable stroke • Finger–hand protection light curtain safety system • PLC control system • Dual-hand/foot control system • Mechanical locking system • Emergency reverse motor operation • Occupational safety regulation compliant • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounting pads • Touchscreen LCD panel (standard between 150–300 tons) • Hydraulic safety system (standard between 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One die set to requested specifications • Eight-way slide guides ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Ton Throat depth: 280 mm Bed–ram distance: 400 mm Slide–table distance: 420 mm Distance between side frames: 400 mm Ram adjustment (slide adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1735 mm Approx. press height: 2220 mm Front anchor dimension: 670 mm Side anchor dimension: 1040 mm Table hole diameter: Ø190 mm Table size: 540×740 mm Die clamping hole diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Note: Please inform us if you require modifications in the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are directly managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 80 t, table width: 600 mm, table length: 800 mm, table height: 850 mm, drop-through hole in table: 190 mm, ram adjustment: 85 mm, stroke adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, Gbjdpsvxhb Usfx Abgon o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 80 Tons Table-Ram Distance 400 Mm Distance Between Walls 880 Mm Ram Adjustment 85 Mm Press Approximate Width 1150 Mm Press Approximate Depth 1500 Mm Press Approximate Height 2500 Mm Table Hole Diameter 190 Mm Table Size 600 / 800 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/min. Engine Power 7.5 KW Engine Speed 1450 RPM Approximate Weight 6,500 Kg

Condition: new, Year of construction: 2025, pressing force: 80 t, stroke length: 500 mm, table width: 700 mm, table length: 700 mm, clearance between the columns: 700 mm, retraction force: 30 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 80/30 Ton Four-Column Hydraulic Deep Drawing Press General Description The CRONOSSTECH 80/30 ton four-column hydraulic deep drawing press is an industrial press solution designed for high-precision metal forming, deep drawing, and die testing applications. It features a rigid four-column body structure for superior accuracy and repeatability. The St52-grade steel frame is subjected to stress relief via vibration, ensuring excellent parallelism and perpendicularity tolerances are maintained during pressing operations. The ram and die cushion systems operate independently; stroke and pressure adjustments can be precisely controlled via the operator panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-based control, this press ensures long-lasting, safe, and energy-efficient performance. Maintenance requirements are minimized thanks to the automatic lubrication system and filter contamination alerts. This model is ideal for small- and medium-scale serial production, die trials, and precision forming processes. Key Advantages - Rigid four-column press body design - Independent stroke and tonnage settings for ram and die cushion - Full control via touchscreen panel - High repeatability and precision - Low maintenance cost, long service life Areas of Application - Metal forming operations - Deep drawing processes - Die trial and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column BODY MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 Tons CAPACITY (DIE CUSHION): 30 Tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 500 mm STROKE (DIE CUSHION): 150 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 600 mm WELDING STRESS RELIEF: By vibration WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DOWN SPEED: 150 mm/sec MOVABLE TABLE DRAWING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec DIE CUSHION FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 200 mm – Ck45 DIE CUSHION CYLINDER BORE: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3300 mm APPROXIMATE PRESS WIDTH: 1050 mm APPROXIMATE PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1100 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION SYSTEM: Automatic (Adjustable from HMI) RAM / DIE CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable from HMI SYSTEM & PRESS STATUS DISPLAY: Viewable on HMI DIE MEMORY: Adjustable from HMI Gbsdpfx Absx N Ultegjn LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK PLC: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 Tons

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 800 mm, table width: 1,000 mm, table length: 1,000 mm, clearance between the columns: 1,000 mm, retraction force: 80 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 250 / 80 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 250 / 80 ton four-column hydraulic drawing press is a high-rigidity hydraulic solution designed for precision metal forming, deep drawing, and press applications. The frame is constructed of St52 grade steel and undergoes stress relief through vibration, ensuring high parallelism and perpendicularity tolerances during long-term operation. The ram and cushion systems operate independently; stroke and pressure settings can be precisely adjusted via the touch panel. With hydraulic components from REXROTH or PARKER, an IE3 efficiency-class motor, and PLC-controlled system, it offers high performance and reliable operation. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With its 250 / 80 ton forming capacity, this model is an ideal industrial press solution for medium- and heavy-duty metal forming, deep drawing, and die applications. Key Advantages - Four-column, high-rigidity press frame - Independent stroke and tonnage settings for the ram and cushion - Full control via touch panel - High precision and repeatability Gjdpex N Um Rsfx Abgsbn - Long service life with low maintenance costs Areas of Use - Metal forming applications - Deep drawing operations - Die testing and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs. induction hardened chrome-plated shafts SLIDE GUIDING: Bronze Zr14 CAPACITY (RAM): 250 Ton CAPACITY (CUSHION): 80 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. OPENING HEIGHT: 100 mm MAX. OPENING HEIGHT: 900 mm STRESS RELIEVING: Vibration stress relief WELDING APPLICATION: WPQR & WPS accredited by TÜRK-AK – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 class MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT: 150 mm/sec FORMING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec CUSHION TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 360 mm – Ck45 CUSHION CYLINDER BORE: Ø 200 mm – Ck45 AUXILIARY BOOST CYLINDERS: 2 units APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 16 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 800 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 80 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-slide H-frame structure provides maximum rigidity during the pressing process, while parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 250/80 model, featuring a 250-ton main ram and an 80-ton lower cushion (pot) capacity, is designed for medium to high tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration to guarantee long-lasting, reliable performance. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press design - Vibration-stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable stroke control for ram and cushion (pot) - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination indicator - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHSP 250/80 Type: Steel construction, 8-slide H-frame press Frame Material: St52 – ERDEMIR Slide Bearings: Bronze Zr14 Capacity (Ram): 250 Ton Capacity (Cushion): 80 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 800 mm Cushion Stroke: 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relief Gjdpjx N Uaqjfx Abgjbn Welding Certification: WPQR and WPS by TÜRK-AK accreditation EN ISO 15614-1/2017 (Welding procedures are overseen by certified “welding coordination engineers” per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Forward Speed: 30 mm/s Main Cylinder Bore: Ø360 mm – Ck45 Cushion Cylinder Bore: Ø200 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 4200 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Measurement: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 18 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.