Used Pinch Roll Unit/Strip Leveller/Crop Shea for sale (43,923)

Year of construction: 1990, condition: good (used), 8 rolls, Ø 53 mm strip width: 50 - 320 mm Kjdogq D Aropfx Ahgenb strip thickness: 0,4 - 3 mm

Year of construction: 2022, condition: new, Lundberg WasteTech 400 All-in-one Unit for Trim Edge Extraction Maximum extraction capacity: 6,000 m³/h (3,540 CFM) Maximum pipe diameter: 315 mm (1’-1”) Maximum extraction distance: up to 30 m (100’) Dimensions (LxWxH): 2615 x 1300 x 3330 mm (8’-7” x 4’-3” x 10’-11”) Weight: 615 kg (1,356 lbs) Extraction fan power: 15 kW (20 HP) Power connection: 3-phase, 230-460V, 50-60 Hz Noise level: 68-72 dB(A) Colour: blue, RAL5010 Including the following accessories: Antistatic unit M5/M6 filter incl. pressure monitoring sensor WT400 frequency converter Bag level sensor TubeBag System (continuous bag) Ksdpfx Ajy Sbc Rjhgsnb According to the manufacturer, simultaneous extraction from up to 24 trim edges is possible. The unit is in as-new condition and was only operated for a few hours. On-site inspection is possible. Original purchase price of the system approx. €65,000 incl. accessory options.

Year of construction: 1992, condition: good (used), 21 rolls, Ø 80 mm strip width: 500 - 1.650 mm Kodpfx Ahjg Iirnjgjnb strip thickness: 1 - 5 mm

Condition: excellent (used), Year of construction: 2001, 25 rolls, Ø 32 mm strip width: max. 2.000 mm strip thickness: max. 1,5 mm speed: max. 40 m/min working direction: any Knsdpfx Ajycub Hehgjb

Year of construction: 1984, condition: good (used), 21 rolls, Ø 60 mm strip width: max. 1.250 mm Ksdpfx Ahsrrl Uegonb strip thickness: 0,6 - 4 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Knedjzx Rz Hspfx Ahgsb Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Year of construction: 1965, condition: good (used), 23 rolls, Ø 18 mm Kjdpfobif Ekex Ahgsnb strip width: max. 50 mm strip thickness: 0,1 - 0,5 mm

Condition: used, Year of construction: 2019, functionality: fully functional, Removal/Feed Unit, Pallet Roller Conveyor/Roller Conveyor Manufacturer: Rack & Roll Condition: Used Year of Manufacture: 2019 Model: Gravity Segment Length: approx. 2395 mm Total Width: approx. 1145 mm Roller/Conveyor Width: approx. 1055 mm Roller/Axle Spacing: approx. 100 mm and 150 mm Roller Diameter: 60 mm Frame: 85/35 mm Material: Galvanized steel Up to 2 brake rollers per segment Stock quantity: 28 units Price per unit Internal Item Number: 2026012601 Features: Condition: Fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Collection Address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with an individual quotation or advise you on planning or installation matters. Simply let us know your requirements and site conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, and the electronics sector. Together, we will find solutions to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or supplementary components such as order-picking racks or bins. Knjdpfx Aheydfugogeb

Condition: used, Year of construction: 2019, functionality: fully functional, Pick-up/discharge unit, pallet roller conveyor/roller conveyor Manufacturer: Rack & Roll Condition: Used Year of manufacture: 2019 Model: Gravity Segment length: approx. 2375 mm Overall width: approx. 1125 mm Roller/conveyor width: approx. 1035 mm Roller/axle spacing: approx. 100 mm and 150 mm Roller diameter: 60 mm Frame: 85/35 mm Material: galvanized steel Up to 2 brake rollers per segment Stock: 20 units Price per unit Internal item number: 2026012602 Knedpsydfuyofx Ahgsb Features: Condition: fully functional with signs of use Ideal for fast material handling Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until dismantling. Due to the excellent manufacturing quality, your material will glide smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to prepare a customized offer for you or provide technical advice on planning and installation. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our outstanding network of specialists. We have already successfully completed projects for companies from various sectors, such as logistics, pharmaceuticals, trades, and the electronics industry. Together, we will find cost-effective and sustainable solutions to optimize your workflow and material handling. We can also offer you fully automated sorting systems or complementary components such as picking racks or containers.

Condition: good (used), 17 rolls, Ø 54 mm strip width: max. 1.450 mm Ksdjbifryspfx Ahgonb strip thickness: max. 2,5 mm

Year of construction: 1975, condition: good (used), 23 rolls, Ø 18 mm strip width: max. 60 mm strip thickness: 0,2 - 0,8 mm Knjdpfobif Egex Ahgob

Condition: used, material width 250 mm Knodpfx Asgbl Aashgeb material thickness 2 - 4 mm no. of straightening rolls 7 run-in height 1250 mm mm strip intake tiltable, positiv 25 ° strip intake tiltable, negativ 30 ° total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. m Leveler was dismantled, checked and then repainted

Condition: good (used), Technical Data for Shelving Trolley: Shelf System: Dexion Type: HI280 Scope of delivery includes: 01x Shelving trolley, used Material finish: Sendzimir galvanized total width with handle: approx. 1,490 mm total width without handle: approx. 1,340 mm total depth: approx. 625 mm total height with castors: approx. 1,965 mm total height without castors: approx. 1,805 mm Number of levels: 3 pcs Number of boxes per shelf: 9 pcs Consists of: 02x Uprights, used Material finish: Sendzimir galvanized Frame profile dim.: 50x55 mm Slot pattern: 25|25 mm incl. base plates (Uprights are pre-assembled) 1,805 mm high 610 mm deep Knodexl Sawspfx Ahgeb 03x Shelves, used Type: S Material finish: Sendzimir galvanized Dimensions: 1,275x575x30 mm Weight: 4.37 kg each Max. load per shelf: 100 kg (with evenly distributed load) 03x Shelf beams, used Version: for shelves Material finish: Sendzimir galvanized Clear span: 1,275 mm Z-profile: 50 x 25 mm Weight: 0.840 kg each 01x Mesh shelf, used Material finish: Hot-dip galvanized total width (TS): approx. 1,380 mm total depth (QS): approx. 625 mm Mesh size: 75 x 35 mm Load bar: 28 | 1.50 mm 09x Collapsible box, used Material colour: grey Dimensions: 600 x 400 x 400 mm 02x Swivel castor, new Wheel material: polyamide Wheel colour: cream white total height: 130 mm Wheel Ø: 100 mm Wheel width: 35 mm 02x Twin-braked swivel castor, new Wheel material: polyamide Wheel colour: cream white total height: 130 mm Wheel Ø: 100 mm Wheel width: 35 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipping required is subject to extra costs, which can be requested separately depending on delivery location and scope of delivery.

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Kedpfxsh U Rzgs Ahgenb Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Guiding roller width: 30 mm Guiding roller diameter: 30 mm Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm Knodpfx Ahjzczvdegob - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Weight: 5 kg Good condition

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Technical specifications: General data Width: 2200 mm Depth: 1350 mm Knjdpfx Asudbzyohgjb Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.

Condition: ready for operation (used), HAULICK slitting shear for rolled sheet metal / rotary knife shear -Max. sheet thickness: approx. 2.5 mm -Cutting length: endless (unlimited) -Cutting method: 2 rotating circular knives -Knife diameter: approx. 120 – 150 mm -Table size: approx. 500 x 250 mm -Overhang / feed area: approx. 250 mm -Motor power: 0.75 – 1.1 kW -Drive: belt drive -Straight cuts -Strip cutting -Endless cutting of sheet metal -Steel sheet up to approx. 2.5 mm -Aluminum and non-ferrous metals, correspondingly thicker Knjdpfx Aoztctwohgsb Dimensions: L x W x H 0.6 x 0.9 x 1.1 meters / Weight 180 kg Errors and omissions excepted

Condition: good (used), Roll Lam 120CS Roll Laminator Knsdpezuryvjfx Ahgsb Double-sided cold lamination, original base included, Lamination width: 1200 mm Manufactured by: Biedermann GmbH Roll laminator equipped with silicone-coated rollers. Technical specifications: Working width / rollers: 120 cm Working width / roll width 130 cm Dimensions (W x D x H): 170 x 68 x 125 cm Infeed table height: 92 cm Weight (with base): approx. 168 kg Maximum board thickness: up to 25 mm Roller diameter: approx. 112 mm (silicone-coated) Maximum speed: approx. 3.5 m/min Power supply: 230 V / 0.07 kW

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 80 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg Kodpfx Asv D Nugjhgenb

Year of construction: 2014, condition: good (used), machine/vehicle number: ONK25SR/4/1, Vegetable sorter / grader with sorting range from 1cm to 10cm and above Kodpfx Ahswzwi Sogonb

Condition: good (used), Year of construction: 2009, Conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, Conveyor belt, 2-level conveyor belt, type EZT with guide rollers -Speed: m/min Knjdpfx Astrhl Tehgjb -Conveyor belt length: 1400 mm -Belt spacing: 500 mm -Roller spacing: 760 mm -Conveyor height: spacing 300 mm -Drive: 2x SEW-Eurodrive 0.25 kW 1380/35 rpm -Number: 3 conveyor belts available - Price: per piece -Dimensions: 1460/1350/H1380 mm -Weight: 274 kg/unit

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls Kjdpev D Nutofx Ahgenb -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 65 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Condition: new, functionality: fully functional, Hydraulic alligator shear – 250 kN -> €4,400.00 Hydraulic alligator shear for professional cutting of metal and scrap. Robust steel construction, high cutting performance, and reliable continuous operation. With a maximum shearing force of 250 kN, a shearing frequency of 10–15 cuts/min, and a maximum blade opening of 160 mm. Shearing length 300 mm, drive power 5.5 kW. Ideal for scrap yards, recycling, metal processing, and industrial applications. Technical data: Shearing force: 250 kN Shearing frequency: 10–15 cuts/min Operating pressure: 15 MPa Blade opening: max. 160 mm Shearing length: 300 mm Motor power: 5.5 kW Dimensions: 1,200 × 980 × 1,200 mm Cable stripping machine GM-918KOF Cable stripping machine GM-918KOF -> €1,390.00 High-performance cable stripping machine for efficient processing of copper and aluminum cables. The GM-918KOF impresses with its robust design, easy operation, and a processing speed of up to 30 m/min. Suitable for cable diameters from 1.5 to 50 mm. With a 3 kW motor and mobile design, it is ideal for workshops, scrap dealers, recycling plants, and electricians. Technical data: Performance: up to 30 m/min Motor power: 3 kW Cable diameter: 1.5–50 mm Dimensions: 700 × 560 × 860 mm Weight: 116 kg Cable stripping machine GM-120-2 Cable stripping machine GM-120-2 -> €2,600.00 Professional cable stripping machine for fast and clean processing of thick copper and aluminum cables. The GM-120-2 processes cables with a diameter of 1–120 mm and is particularly suitable for large quantities of cables and industrial applications. With a 2.2 kW drive and 9 + 2 blades, it enables efficient and precise cable processing. Kjdpfx Aezx S Axjhgonb Technical data: Motor power: 2.2 kW Cable diameter: 1–120 mm Blades: 9 + 2 pieces Suitable for: Copper and aluminum cables Application: Recycling, scrap yards, cable processing, and industry

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE Kodpfx Astyqizehgenb

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 9941 / 09/20, inner dimension width: 1,100 mm, inner dimension length: 660 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! TECHNICAL DETAILS Working area (H x W x D): 550 / 800 × 1,100 × 660 mm MACHINE DETAILS Air pressure: up to 8 bar Dimensions & Weight External dimensions: 1,785 × 1,250 × 1,250 mm Other dimensions: 1,300 × 1,300 × 1,700 mm Weight: approx. 350 kg Working floor load: max. 350 kg Kedszx S Iuspfx Ahgenb Voltage supply: 230 / 400 V, PE/N Mains frequency: 50 Hz Fusing: 3 × C16 A Rated current L1: 0.8 A Rated current L2: 0.7 A Rated current L3: 0.6 A EQUIPMENT Operating manual CE / conformity documents