Used Mikron A 22/0 for sale (115,618)

Condition: used, Year of construction: 2011, A machining center from Schwäbische Werkzeugmaschinen in need of repair is offered. Travels X/Y/Z1/Z2: 400mm/500mm/425mm/425mm, Y tool-change position: 775mm, swivel axis Q: 180°, rotary axes: A + U, number of spindles: 2, spindle distance: 400mm, max. spindle speed: 17500rpm, spindle bearing diameter: 80mm, rapid traverse: 100m/min, max. tool positions: 232, tool interface: HSK-A63, max. tool diameter: 80mm, max. tool length: 300mm, max. tool weight: 10kg, Control: Siemens 840D. Motor of the C1 axis defective, W axis is defective. Replacement required. Machine dimensions X/Y/Z: 4350mm/7000mm/4000mm, weight: 14.5t. Documentation available. Inspection possible by arrangement. Nwodpsz Irmtjfx Ag Ion

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Control: SIEMENS 840D Number of pallets: 2 Number of axes: 5 Number of spindles: 2 Tool holder: HSK63 Spindle drive power: 15.5 kW Spindle speed: 17500 rpm Spindle clearance (distance): 300 mm LINEAR AXES Travel X/Y/Z: 300 x 650 x 400 mm Rapid traverse rate (X/Y/Z): 75,000 mm/min ROTARY AXIS A Travel: 360 degrees Minimum resolution: 0.001 degrees ROTARY AXIS C Travel: 360 degrees Minimum resolution: 0.001 degrees Number of tools in magazine: 2 x 32 PALLET CHANGER Max. table load: 300 kg Electrical Power Supply Power supply: 400 V Total connected load: 70 kVA Weight and Dimensions Floor space requirements: 3900 x 3260 mm Machine height: 3100 mm Machine weight: 8800 kgs Nwedpoycg R Hsfx Ag Ijn Accessories / Equipment Interface: Ethernet / RS232 / PCMCIA Coolant tank: 400 l With high-pressure pump: 70 bar With paper belt filter: KNOLL PF160/800 With coolant cooling system Internal Coolant Supply (ICS) Chip discharge: Rear Oil mist extractor: LOSMA Darwin 1200 Spindle cooler The machine is in good used condition. Available under power in Hungary.

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 14,890 h, load capacity: 22,000 kg, lifting height: 3,800 mm, free lift: 150 mm, fuel type: diesel, mast type: duplex, construction height: 3,710 mm, motor manufacturer: Scania, gearing type: hydrostat, tire condition: 85 %, overall weight: 33,200 kg, total length: 6,050 mm, total width: 3,030 mm, color: yellow, Heavy-Duty Forklift SMV SL22-1200A Brand: SMV Forklift Type: SMV SL22-1200A Year of Manufacture: 2001 Operating Hours: approx. 15,000 h Mast Type: Duplex Lifting Height: 3,800 mm Overall Height: 3,710 mm Free Lift: 150 mm Drive Type: Diesel Nwsdpjy A Sgbsfx Ag Ien Engine: Scania Vehicle Width: 3,030 mm Vehicle Length: 6,050 mm Total Weight: 33,200 kg Rated Capacity: 22,000 kg at 1,200 mm load center Special Features: Full cabin, heating, air conditioning, street-legal lighting, beacon, work lights front and rear, fabric seat, panoramic mirror, Service and FEM 4.004 inspection - NEW Attachments: Sideshift and fork positioner Forks: 2,400 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2080403, CNC Horizontal 5-Axis Double-Spindle Machining Center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of Manufacture: 2017 Machine Number: 2080403 Control System: CNC Siemens 840 Number of Axes: 5 Number of Spindles: 2 Double Table System Travel Ranges X/Y/Z: 600 / 600 / 510 mm Spindle Speed: up to 17,500 rpm Rapid Traverse: up to 45 m/min Tool Interface: HSK-A63 Machine Weight: approx. 16,000 kg Equipment: Standard accessories Nwsdpfx Ago Aarqpo Ijn Powerful CNC horizontal machining center with a double spindle and double table system for precise and efficient series production. Location: Maribor, Slovenia Availability: By arrangement Inspection possible by appointment.

Condition: used, Year of construction: 2022, operating hours: 1,700 h, PIŁA PANELOWA Producent: HOMAG Typ: SAWTEQ B-200 Optimat HPL200/38/22 Rok 2022 Nedszkmrfspfx Ag Iewn Z załadunkiem only 1700 working hours !!!!

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron VC500D -for: max. 16 recordings -Recording: SK40 Nwodpjy Tvttefx Ag Ien -Individual components: see photos -Transport dimensions: Ø 780 x 540 mm -Weight: 56 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Model: BAW06-22 Year of manufacture: 2018 Machine No.: 2080519 Control: Siemens SINUMERIK Machine type: CNC horizontal twin-spindle machining center Country of origin: Germany Technical Data Njdpszypmqefx Ag Iewn Working travels: X-axis: 600 mm Y-axis: 600 mm Z-axis: approx. 400–500 mm* Number of machining spindles: 2 Spindle arrangement: horizontal, twin spindle Spindle distance: 600 mm Maximum spindle speed: 17,500 rpm Tool holder: HSK-A63 Spindle power: up to 2 x 35 kW* Spindle torque: up to 2 x 80 Nm* Rapid traverse X/Y/Z: up to 100 m/min* Automatic tool changer: Yes Tool magazine: up to 84 positions / 2 x 42 tools* NC rotary/swivel workholding system Automatic workpiece changing/loading system Automation / Equipment Industrial robot for automatic loading and unloading Complete safety enclosure Automatic workpiece handling system NC-controlled rotary/swivel workholding Twin-spindle simultaneous machining Automatic tool changer KNOLL coolant filtration system High-pressure coolant system Chip evacuation system Central coolant supply Siemens operator panel CE marking Electrical Data Operating voltage: 3/PE / 400 V / 50 Hz Full-load current: 190 A Pre-fuse: 200 A Pneumatic pressure: 7.0 bar Air consumption: 1.0 Nm³/min Electrical diagram No.: 205-000-20678-97 Weight Machine weight: approx. 16,000 kg Nameplate specification: 160 kN Description SW BAW06-22 CNC horizontal twin-spindle machining center, manufactured in 2018. The machine is designed for highly productive simultaneous machining with two horizontal machining spindles. Equipped with Siemens SINUMERIK CNC control, HSK-A63 spindle interface, high-speed spindles up to 17,500 rpm, automatic tool changing system and NC-controlled rotary/swivel workholding. The machine is integrated into an automated production cell with industrial robot for automatic workpiece loading and unloading. The machine is additionally equipped with a KNOLL coolant filtration system, high-pressure coolant supply, chip management system and complete safety guarding. Made in Germany.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080100, CNC Horizontal 5-Axis Twin-Spindle Machining Center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of Manufacture: 2011 Machine Number: 2080100 Control System: CNC Siemens 840SL Number of Axes: 5 Number of Spindles: 2 Nwsdpfx Age Aarpxs Ien Dual Table System Travel in X/Y/Z: 600 / 600 / 510 mm Spindle Speed: up to 17,500 rpm Rapid Traverse: up to 45 m/min Tool Interface: HSK-A63 Machine Weight: approx. 16,000 kg Equipment: Standard accessories High-performance CNC horizontal machining center with twin spindle and dual table system for precise and cost-effective series production. Location: Maribor, Slovenia Availability: Immediately available Inspection possible by arrangement.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080092, Used CNC horizontal 5-axis twin-spindle double-table machining center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of manufacture: 2011 Njdpfsz E Ddfsx Ag Iewn Machine No.: 2080092 Weight: approx. 16,000 kg Technical data: - CNC horizontal machining center - 5-axis design - Twin spindle - Double table - Travel ranges: - X-axis: 600 mm - Y-axis: 600 mm - Z-axis: 510 mm - Rapid traverse: up to 45 m/min - Tool interface: HSK-A63 - Spindle speed: up to 17,500 rpm Equipment: Machine with standard accessories. Availability: Available in the short term.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2080082, Used CNC horizontal machining center, 5-axis, with dual spindle and dual table Technical data – SW BAW06-22 Nwsdpfxe Aarpfo Ag Ijn Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Model: BAW06-22 Year of manufacture: 2010 Machine number: 2080082 Control system: CNC Design: Horizontal Number of axes: 5 Number of spindles: 2 Number of work tables: 2 Travel in X-axis: 600 mm Travel in Y-axis: 600 mm Travel in Z-axis: 510 mm Maximum spindle speed: 17,500 rpm Rapid traverse rate: up to 45 m/min Tool holder: HSK-A63 Machine weight: approx. 16,000 kg Accessories: Standard accessories Availability: Available immediately Machine description Used CNC horizontal machining center SW BAW06-22 with 5-axis machining, two work spindles, and a dual table system. The dual-spindle design allows two workpieces to be machined in parallel. The high spindle speed of up to 17,500 rpm enables productive and precise machining. Additional manufacturer data According to the technical data sheet from SW, the following values are specified for the BA W06-22 series: Spindle distance: 600 mm Spindle power: 2 × 35 kW Spindle torque: 2 × 80 Nm Tool magazine: 2 × 42 positions, optional larger Maximum tool length: 425 mm Maximum tool weight: 10 kg Control system according to manufacturer: Siemens SINUMERIK 840D sl Operating voltage: 400 V / 50 Hz

Condition: used, Year of construction: 2022, operating hours: 1,700 h, Panel dividing saw Manufacturer: Homag Type: Sawteq B-200 Optimat HPL200/38/22 Year of manufacture: 2022 Technical data - Cutting length: 3800 mm - Width of feed table: 2200 mm - Number of clamping devices: 7 - Feed rate: max. 80 m/min - Stepless feed rate - Panel thickness: min. 9.5 mm - Saw blade overhang: 95 mm - Saw blade diameter: max. 380 mm - Main motor: 9.2 kW Nwjdj Abaqyopfx Ag Ien - Scoring saw - Labeling manually via HOMAG PICA - Control system: CADMATIC 5, Homag POWER CONTROL V2 - CE marking - Operating hours: 1700h Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 617 138 66, input voltage: 380 V, type of input current: three-phase, total length: 5,000 mm, total width: 3,100 mm, total height: 2,000 mm, Rotary slitter for converting rolls into sheets Nodpfszi S Agox Ag Ijwn Cardboard and corrugated paper Slitting width from 700 to 1500 mm Maximum roll diameter: 1500 mm

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l feed length max. 600 mm total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping Nsdpfx Agoxab R Uj Iown - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: used, Safety switch, safety switch, protective grille switch, limit switch, button, safety switch, position switch, magnetic locking switch, safety locking switch -Manufacturer: Schmersal, safety locking device made from CNC milling machine Mikron UME 600 -Type: AZM 161SK-33rka-024 IEC 60947-5-1 -Technical data: see photo of nameplate -Transport dimensions: 270/260/H60 mm Nodporcnm Nefx Ag Iown -Weight: 1.5 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Nwedpfx Agezvnfwo Ion Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Nwjdpfx Agjv Uqb Nj Isn

Year of construction: 2007, condition: excellent (used), Control: STE 328-89-1 1/2" complete TOX power pack: S75.160.200.12D table size: 996 x 695 mm installation height: 600 mm total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V Nwedop Aul Aopfx Ag Ien

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits Nwjdpfx Agox D Skmj Isn • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,500 l, Equipment: documentation/manual, BRINOX 1,500 L Main Precipitation Vessel – 316L – Double Jacket – PED Module G – FAT 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBI-1500 Tag No.: BH6724-BH1001 Package 22 Serial Number: 1003457 Year of Manufacture: 2020 Condition: As new / unused CE Marking: CE 0036 TECHNICAL DATA Product Type: Main precipitation vessel / process vessel Nominal Volume: 1,500 liters Total Volume: 1,785 liters Empty Weight: approx. 866 kg Product-contact Material: 1.4435 (AISI 316L pharmaceutical grade) Jacket Material: Stainless steel Operating Pressure (Vessel): –1 / +3 bar Test Pressure (Vessel): 5.4 bar Operating Pressure (Jacket): as per design Temperature Range: –10 °C to +150 °C Pressure Vessel in accordance with PED 2014/68/EU Module G – Individual inspection Approval by notified body 0036 FAT – Factory Acceptance Test (08/2020) The vessel underwent a complete documented FAT at the BRINOX plant. Tests performed included: • Delta ferrite test of weld seams (conforming, no deviations) • Surface roughness check (Ra internal ≤ 0.8 µm, conforming) • Visual inspection of all product-contact surfaces • Pressure test as per specification • Documentation review • GMP deviation management (only non-critical points, fully resolved) • Measuring instruments with valid calibration certificates DESIGN • Double jacket for heating/cooling • Horizontal design • High-grade pharmaceutical finish • Fully constructed from 316L stainless steel in product-contact areas • Mirror-polished internal surface • GMP-compliant, documented weld seams • Large manway with swing cover • Multiple clamp and flange connections • Spray ball / CIP connections • Prepared for instrumentation (pressure, temperature, sensors) • Insulated jacket with connections • Heavy-duty flange base • Lifting lugs and transportation version • Project-specific build for CSL Behring (Project SPHINX) CONDITION • Never in productive use • Direct from project surplus • Absolutely as-new interior • No corrosion • No signs of use • Industrial as-new condition • Immediately available DOCUMENTATION Complete project-related quality and manufacturing documentation available, including: • EU Declaration of Conformity • TÜV inspection documents • PED Module G documentation • 3.1 material certificates • Welding documentation (WPS/WPQR) • Delta ferrite test protocols • Roughness measurement protocols • Calibration certificates for measuring instruments • GMP deviation protocols • Fully signed FAT protocols • Operating and maintenance manuals All documentation is complete and well-structured. • Pharmaceutical active substance processes • Precipitation and reaction processes • Buffer and solution preparation Nsdpfxsykn Iie Ag Iswn • Sterile liquid processes • Biotechnology • GMP production facilities • Ultra-pure media SPECIAL REMARKS This is a high-quality BRINOX process vessel in true pharmaceutical project quality, built for CSL Behring, with full PED Module G individual inspection, FAT 2020 documentation, and comprehensive GMP documentation. Not a standard tank, but certified project quality for sterile applications. Immediately available.

Condition: excellent (used), Year of construction: 2017, Separator, dust separator, welding fume filter, filter system, cartridge dust extraction system, cartridge filter unit, cartridge filter Nodpfx Aeytgrxjg Ijwn -Condition: unused, without extraction fan -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Condition: good (used), Year of construction: 1997, High-speed EDM drilling machine, KOTON Type: EDM-KTH-202A.. Nwodpewmn Szofx Ag Ijn In good condition with cooling and filter unit. Machine documentation available. See data sheet for specifications.

Condition: like new (used), functionality: fully functional, FESTO DGPL-32-2180-PPV-A-B-KF-SH LINEAR ACTUATOR Pressure: 2…8 bar. Good working condition. Please check out our other listings as well. Nwodpjtwqtbofx Ag Ijn

Condition: used, minimum range for wine: 15,000 litres/hour Nwsdpfx Ajz N Ewvsg Ion

Year of construction: 2016, condition: excellent (used), Indexable insert milling cutter – Face milling cutter Manufacturer: Mitsubishi Type: AHX 640 W 160 C 22 R Multicorner Face milling cutter for high feed rates For 22 heptagonal inserts Cutter diameter: 160 mm Nwodpfxsfc Tq Ee Ag Ien

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: Oerlikon wire feeder, gas-cooled Nedpfxsvw Radj Ag Iewn -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm -Total weight: 19.6 kg