Used Mekom Ltd. Minibrik-30 for sale (26,914)

Year of construction: 2019, condition: used, Used metal frame for the transportation of products. Djdpfxsy Ni R Rs Aiwsut Available: 302 units. Max load: 2000 kg

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Dujdpsu Tg I Dsfx Aiwst Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: good (used), Year of construction: 2015, web offset-flexo printing machine register BST camera control system unwinder semi rotary uv flexo chamber no.1 semi rotary uv flexo chamber no.2 semi rotary uv offset no.1 semi rotary uv offset no.2 cold embossing unit for offset semi rotary uv offset no.3 semi rotary uv offset no.4 semi rotary uv offset no.5 semi rotary uv offset no.6 semi rotary uv flexo chamber varnishing no.3 semi rotary die-cutting rewinder max speed 50 - 180 m/min color range 4 - 10 colors max print length 350 mm Dedpfowgittox Aiweut max paper width 320 mm max print width 300 mm max unwinding diameter 700 mm max rewinding diameter 600 mm machine including process-free CTP Agfa PT - R4300S

Condition: used, F J Edwards Ltd Sheet Metal Bender, Max Material Width 1850mm, Cast Iron Construction Location: These lots are located in High Wycombe, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dedpfx Aey H Ifneiwjut

Condition: used, We offer used grating panels for sale here. TECHNICAL DATA Dimensions: 1,110 x 975 x 30 mm Mesh size: 30 x 30 mm Surface: galvanized Condition: used Djdsy H Hfgspfx Aiwjut PRICE €162.00 net per unit (10 pieces) €192.78 gross incl. VAT Available quantity: 89 pieces YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The extra costs depend on the delivery location and shipment size and can be discussed with us individually. PROJECT PLANNING Our sales team will be pleased to provide you with a non-binding quote tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The price listed is per piece/net price or as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades new and used products in the fields of warehouse logistics, conveyor technology, warehouse platforms, textile storage as well as machinery for commerce, industry, and trade professionals. We continuously offer attractive used equipment from various manufacturers and brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Model of VFFS bagger – GV2K1. Serial number - GV021201. Dsdpsy Hlvwsfx Aiwsut Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Model of VFFS bagger – GV2K1. Serial number - GV021202. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Dedpfxoy Hlkbs Aiwsut Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: excellent (used), Catalogue number 7374 TECHNICAL DATA - Upper feed hopper dimensions (L/W): 840x620 mm Duodpfx Aisy At Nqewjt - Lower feed hopper dimensions (L/W): 300x300 mm - Rotor width: 340 mm - Motor: 22 kW - Screen: 15 mm - Number of knives: 6 pcs - Discharge for shredded wood: Ø 160 mm - Dimensions (L/W/H): 1400x800x2000 mm - Weight: 840 kg ADVANTAGES – German-made – Very good condition – Used wood chipper Net price: 23,900 PLN Net price: 5,690 EUR based on an exchange rate of 4.2 EUR (Prices may vary significantly with currency fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PCM 200, total length: 1,650 mm, total width: 800 mm, total height: 1,900 mm, warranty duration: 12 months, type of input current: three-phase, power: 225 kW (305.91 HP), Hot air Pork crackling machine Here is the introduction of our pork crackling machine, as follows: Our pork crackling machine is produced from high quality AISI 304 stainless steel. The machine consists of stainless steel body, including inner drum with holes, which allow moderate distribution of hot air and even baking of the product. The operator may choose the time and frequency of the drum rotation with the help of the Frequency regulator and the German company Aditec control. The drum rotation can be according to the product types and time frequency control of the motor speed. The machine is wrapped with insulation, which fully ensure the safety of the operation of the workers, prevent burns. Our Pork crackling machine save manpower, reduce production cost, has easy paddle discharge system, perfect heating system, reliable electric control system, etc. This pork crackling machine is a new type of energy-saving equipment that our company has developed for the characteristics of this type of the products. This is our pork crackling machine introduction, if you want to know more information about the pork crackling machine, feel free to contact with me. Dusdpfsy Ex Eiox Aiwet

Year of construction: 2023, condition: excellent (used), Weighing and Bagging System Year: 2023 Comprising of: - 1 x Incline Conveyor, approx. 5m height Gantry 1 x 14 Head Multihead Weigher, dimple pan Dedpjy Exfvsfx Aiwsut 1 x Vertical Form, fill and seal bagger, Model: X500 (was packing 180g bags of Mangetaut) 1 x Checkweigher *Lots of videos available*

Condition: excellent (used), Year of construction: 1978, operating hours: 60,000 h, functionality: fully functional, This listing offers a Kim Ho Sheng Industrial Co Ltd rubber and plastic open mixing mill, model ROLL 16x42'' L, manufactured in 1978. The machine features two large metal rollers designed for mixing rubber and plastic materials. It is equipped with a substantial exhaust hood and duct system positioned above the rollers to provide ventilation during operation. Control handles are located on both sides of the machine, allowing for manual adjustments and operation. This mixing mill is suitable for industrial rubber and plastic processing applications where open mixing mills are required. Duedpfx Aisyqyb Uowot

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Dodpfx Aotp I S Aoiweut

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Condition: Good Available: Immediately Dujdjynrzbepfx Aiwet

Condition: used, DAF Plant Comprising of: - DAF plant white water system Chemical dosing Polymer mixing Air compressors and control system. Feed pumps and blower available if required. Djdpfxjy Au Ars Aiweut *Drawings available* Located in Bristol, UK (Buyer to remove)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Belt Fryer Brand Technoinvest Engineering Ltd Duodpswatvrofx Aiwst Model FML-3M Number: 350 Year of construction: 2008 Mesh belt with partitions Belt width: 680 mm Distance between partitions: 200 mm Band height: 40 mm Overall dimensions: 9800 mm x 1500 mm x 2350 mm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Dedpfx Ajq H Shcoiwsut Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1235, controller manufacturer: Germany Beckhoff, working width: 1,200 mm, bending angle (max.): 90 °, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, total length: 1,685 mm, total width: 1,262 mm, type of input current: three-phase, workpiece length (max.): 1,200 mm, workpiece height (max.): 430 mm, nominal power (apparent): 3 kVA, number of spindles: 6, opening width: 400 mm, - Germany Beckhoff System, Closed-loop control, High bending accuracy. - Italy GIVI MEASURE precision linear encoder. -High strength machine body after heat-treated. - No need to change bending tool. - The Blank-holder tool can automatically change the length basic on the sheet length. - Multilateral automatic continuous bending. -Automatic programming software can finish all the process - Automatically check and optimize. the process -All servo motor control, fast and energy saving Dusdpfx Aewfwkqeiwet - Automatically control pressing force.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1032, warranty duration: 12 months, total width: 2,300 mm, total length: 1,685 mm, bending angle (max.): 90 °, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, nominal power (apparent): 4 kVA, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, type of input current: three-phase, -Complete machine frame processing -Double-cylinder electro-hydraulic synchronous control -A variety of electro-hydraulic CNC systems are optional -Mechanical compensation Dodpfx Aiowfwkwowjut -Segmented mold -High-precision back gauge structure -Scalable number of axes

Condition: new, functionality: fully functional, Year of construction: 2025, controller manufacturer: Self-developed brand, workpiece length (max.): 2,000 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, machine/vehicle number: 2016, Product Features: The KaFe manual Panel Bender (Bending Center) is a next-generation, fully automatic multilateral bending center, offering high precision and efficiency. It represents a benchmark for automated production in the sheet metal manufacturing industry. It significantly reduces labor costs and boasts a bending speed three times that of CNC press brakes, reaching 0.5 seconds per cycle. Full servo control ensures product accuracy within 3 seconds. Product Function: Duodpfjxu Uhvjx Aiwet The KaFe Manual Panel Bender (Bending Center) can bend sheet metal into various complex shapes without the need for molds. Equipped with a pure electric servo system, it replaces hydraulic drive and offers environmentally friendly, high-speed, high-precision, and maintenance-free features. This high-tech product was developed and manufactured to improve production efficiency, reduce labor intensity, and enhance corporate image in the sheet metal industry.

Year of construction: 2010, condition: good (used), Our Asys buffer system is for sale. Dsdoyylqzjpfx Aiwjut Type: FPS 30 B Year of manufacture: 2008 Condition: good Available immediately

Condition: good (used), Bandall BA 24/15-30 Banding Machine One of the most recognizable banding machines in the world, a market leader. Manufactured by Bandall, the Netherlands. Machine in very good condition, recently serviced. Year of manufacture: 2016 The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone frame with wheels for transport. Dedeyurznopfx Aiwjut Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Controlled via an LCD panel. Technical specifications: Tape width: 30 mm Performance: 36 cycles/min Machine opening dimensions: 320 x 160 mm A roll of film is included.

Condition: new, Year of construction: 2025, functionality: fully functional, air demand: 200 m³/h, total width: 2,400 mm, total height: 2,350 mm, total length: 3,500 mm, Cartridge filter system MBX-6000 with 8 cartridges. Suitable for filtering all types of dust, e.g. wood, sand, etc. Effective air output: 6000 m³/h, electric motor 9 kW, 3x400 Volt, 50Hz, filter area: 104 m² (8x13 m²), filter class: M, according to DIN 60335, filter cleaning: pneumatic, 10 min run-on. Dust containers: 4 pcs, each 30 liters. Clemco blasting pot (used), 100 liters Dedpfsx Ai Hpsx Aiwsut Screw compressor Renner RSK 1-30, year of manufacture 2020, 1178 operating hours.

Condition: good (used), Filling, capping, and labeling line for "PET" bottles, designed for calm liquids such as oil, vinegar, juices, nectars, etc. The set includes the following components: 1) PROSPOMASZ MONO-30 piston filler - Adjustable output: up to 3,000 bottles (packages/hour) - Number of dosing heads: 8 - Number of capping heads: 4 - Bottle volume: 200 - 1000 ml - Package dimensions: ~ Diameter: 50 - 110 mm ~ Height: 150 - 330 mm ~ Minimum bottle neck diameter: 18 mm - Weight: 1,100 kg - Installed power: 0.75 kW - Year of manufacture: 2003 - Machine dimensions: ~ Length: 1,500 mm ~ Width: 1,150 mm ~ Height: 2,300 mm The machine is currently set up for 1000 ml bottles. Additional format change parts for 500 ml bottles included. The set also includes many spare parts and seals. 2) Foil labeler (hot-melt roll-fed) - Manufacturer: JAWOTECH s.r.o. - Model: Tech - Lab HM - Capacity: up to 4,000 bph - Weight: 300 kg - Installed power: 4.0 kW - Year of manufacture: 2018 Duodpfx Aowyddyeiwst - Machine dimensions: ~ Length: 2,000 mm ~ Width: 1,200 mm ~ Height: 1,800 mm Automatic hot-melt application system by NORDSON, professional grade. The machine is configured for labeling 1 L bottles. Other bottle sizes require entry component adjustment. 3) Slat conveyors with a total length of 850 cm. Used machines, fully operational, regularly serviced. Video footage of the machines in operation prior to disassembly is available. Photos show the current condition in our warehouse.

Condition: used, Year of construction: 1995, functionality: fully functional, controller model: DNC 80, degree of automation: manual, Jonescheit Hytap 30 with DNC 80 – robust press brake featuring proven control system For sale is a Jonescheit Hytap 30 equipped with DNC 80 control. This is a robust and reliable press brake suitable for use in both workshop and production environments. The machine is designed for precise bending operations and stands out due to its solid construction and user-friendly operation via the DNC-80 control unit. It is an attractive solution for companies seeking a fully functional and immediately available press brake. Specifications: Manufacturer / Model: Jonescheit Hytap 30 Control: DNC 80 Year of manufacture: 1995 Type: manual Condition: used, fully functional Notes: The machine is sold without tooling. Inspection and test run on site are possible. Condition: Used and ready for operation. Dodpjyxakysfx Aiweut Conclusion: A solid press brake for operators seeking a field-proven machine with DNC control. Ideal for on-site inspection and functional testing.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 345117, Magic-Skin 5035EV semi-automatic skin packaging machine. Board size 495mm x 345mm. Maximum product height 100mm. Dsdpfx Aieywu Hgoweut Timers control dwell time, heating time and vacuum time, incorporates self contained vacuum pump. Fitted with infeed/discharge tables and supplied free-standing with 4 castors 2 locking castors. (Paint colour blue) Power requirement: 230V, single phase 3 pin blue 16 amp Overall dimensions (lxwxh) 1810x965x1450mm