Used Master Peristaltic Pump for sale (10,279)

Condition: used, This listing is for a Watson Marlow 520S Peristaltic Pump. (1 of 7 Available) The unit is in full working condition and is ready for immediate release. Gujdoxv A Uyopfx Aa Esd Peristaltic pumps are the simplest possible pump, with no valves, seals or glands to clog or corrode. The fluid contacts only the bore of a tube, eliminating the risk of the pump contaminating the fluid, or the fluid contaminating the pump. Peristaltic pumps can operate dry without risk. Easy to install, simple to operate and inexpensive to maintain, peristaltic pumps are ideal for most fluids, including viscous, shear-sensitive, corrosive and abrasive fluids, and those containing suspended solids. Suitable for metering, dosing and dispensing applications. 520S drive offers manual control via a large-key membrane keypad: speed adjustment; run and stop; forward/reverse; "Max" key for rapid priming and purging. Supply voltage/frequency: 100-120V/200-240V 50/60Hz Flow rates from 4 micro-litres/min up to 2.4 liter/min Precise 2,200:1 speed control range from 0.1 to 220 rpm in 0.1 rpm increments Large speed/flow display and easy to use tactile membrane keypad. Incorporates keypad lock Manual control and flow rate calibration MemoDose for accurate single shot dispensing

Condition: used, This listing is for a Watson Marlow 604S Peristaltic Pump Godpoxv Ad Ujfx Aa Ejud The unit is in full working condition and is ready for immediate release. The Watson‑Marlow 604S is a laboratory/industrial peristaltic (tube) pump, designed for dosing, metering, and fluid transfer tasks where the fluid must remain isolated from moving parts. It’s part of the “600” series of Watson‑Marlow pumps and is intended for relatively high flow rates in a controlled environment (e.g. labs, pilot plant, certain chemical or processing setups). Because it’s a peristaltic pump, the fluid only contacts the inner wall of a flexible tube, which makes it suitable for shear‑sensitive, corrosive or potentially particulated fluids, without contaminating the pump internals Strengths Clean & Isolated Flow: Because only the inner surface of the tubing contacts the fluid, there is no risk of cross‑contamination or fluid leaking into mechanical parts. Good Flow Capacity: With a relatively high maximum flow (≈ 11 L/min), it can handle moderate bulk transfer in addition to dosing. Robust Housing: The IP55 rating makes it resistant to dust ingress and water spray, which is beneficial in industrial or lab environments with splashes. Variable speed control: The broad control range allows fine tuning of flow. Relative simplicity of maintenance: Replacing tubing is straightforward compared to more complicated pump mechanisms (valves, seals, diaphragms, etc.).

Condition: used, This listing is for the Watson-Marlow 520Di Dispensing Pump The unit is in full working condition and is ready for immediate use Overview The 520Di is a high-precision, programmable peristaltic dispensing pump designed for aseptic fluid transfer and filling in pharmaceutical, biotech, and food processing environments. With a simple keypad-screen interface and up to 50 programmable batch routines, it meets cGMP documentation needs while delivering fast and accurate fluid dispensing. Dispenses 50 mL in 2 seconds with ±0.5% accuracy Pumps up to 3.5 L/min, pressures up to 2 bar Batch record output for regulatory compliance 5-year warranty Enclosure options: IP31 (NEMA2) and IP66 (NEMA4X) Control User Interface: Tactile membrane keypad + alphanumeric LCD Security: Optional passcodes to lock settings Program Storage: Save 50 custom fill/dispense sequences Digital I/O: 4 configurable outputs Remote Operation: Contact closure or logic input control Documentation Full operating manuals Validation support documents (cGMP, IQ/OQ protocols) Maintenance and calibration guides Gjdpfoxv A Aksx Aa Ejud Sectors & Applications Pharmaceutical & Biotech: Aseptic fill/finish, cell culture media filling, vial/bottle dosing Food Production: Adding dyes, vitamins, flavours Laboratory R&D: Benchtop reagent prep, Petri dish filling Chemical Processing: Metering corrosive or high-viscosity fluids

Condition: used, This listing is for the Autoclude Model V Peristaltic Pump The unit is in full working condition and is ready for immediate use The Autoclude peristaltic pump is a type of tube (hose) pump made by Verderflex / Autoclude. Its defining feature is that only the flexible tube (or hose) inside the pump is in contact with the fluid being pumped. The rest of the pump (rollers, casing etc.) stay clean / isolated. This makes them good for contamination-critical, corrosive, slurry, or shear-sensitive fluids Design / Key Features Some of the design / functional features: Seal-less and valveless: Since fluid is contained within tube, no seals exposed to fluid or valves that could leak. Self-priming: Can start pumping without needing fluid completely filling the inlet, and often able to handle gas or ‘air’ in the line. Gjdexhduxepfx Aa Eeud Capable of running dry without damage (when tube material allows) for short durations. Electrolab Group Reversible flow: The rotor or drive can reverse, so flow can be reversed to purge lines, etc. Gentle pumping: Because fluid only contacts tube, and the shearing is limited, better for shear-sensitive liquids / slurries. Rapid tube replacement Stackable / multi‑head options: Some “easy tube loading” models allow several pump heads to be driven by a single drive unit, for multi‑channel or sampling/analysis setups

Condition: used, This listing is for the Watson Marlow 323 Peristaltic Peristaltic Pump Guodpsxhdu Eefx Aa Ejd The unit is in full working condition and is ready for immediate use The 323 series from Watson‑Marlow is a benchtop “cased” pump line (sometimes called peristaltic or rotary tubing based pumps) designed largely for laboratory and light industrial applications. Key features include: A drive unit (“drive”) plus interchangeable pumphead/tubing to suit different flow rates, tubing types, chemical compatibilities. Versions available with different levels of control: manual speed control; auto/remote control; analogue inputs/outputs; RS‑232 etc. A membrane keypad and digital LCD on most models to set/display speed etc. Build is robust: chemically resistant ABS top, IP31 protection rating

Condition: used, This listing is for the Cole Parmer MasterFlex LS Pump Head 07528-10 with easy load ll pump head The unit is in full working condition and is ready for immediate release Cole-Parmer Masterflex L/S Easy-Load II Pump Head The Cole-Parmer Masterflex L/S Easy-Load II Pump Head is a high-performance peristaltic pump head designed for laboratory and industrial applications that require precise fluid handling. This updated model builds upon the original Easy-Load design, offering enhanced features for improved efficiency and ease of use. Key Features New Design and Automatic Tubing Retention: The updated design allows for easy tubing changes without removing the head from the drive. Automatic tubing retention secures the tubing without the need for manual adjustments, simplifying setup and reducing the risk of errors. Three-Roller Design: This design provides smooth and consistent flow, reducing pulsation and improving fluid transfer performance. Adjustable Occlusion: Fine-tune the occlusion to balance tubing life and pressure performance. By adjusting the "squeeze" on the tubing, users can optimize pressure, suction capabilities, and extend tubing life. Stainless Steel (SS) or Cold-Rolled Steel (CRS) Rotor/Roller: Choose between stainless steel or cold-rolled steel for increased durability and enhanced chemical resistance, catering to various operational needs. Stackable Design: The pump head is stackable for multichannel applications, and the rollers are offset by 45° to minimize pulsation when multiple pump heads are combined. Compact Design: The compact design ensures efficient use of space in laboratory or industrial setups. Multiple Tubing Sizes Compatibility: The pump head accepts various tubing sizes, including L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, and L/S 18. This provides maximum flexibility for different fluid handling applications. Automatic Tubing Retention for Easy Setup: The automatic tubing retention system eliminates the need for manual adjustments, ensuring an easy setup process, improved tubing life, and better overall performance. Flow Rate Range The pump supports flow rates from 0.06 to 2300 mL/min, depending on tubing size and drive settings, providing flexibility for a wide range of applications. Guedexuqh Eopfx Aa Eod

Condition: used, Year of construction: 2023, operating hours: 1,176 h, 2023 | Rubble Master RM 100GO! | Used Crusher | 1176 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 363000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 88 inspection points 83 approved ✅ 4 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: The Crusher was operating but fell in a error mode , driving and hydraulics work but chrusher part doesnt engaged, problems with clutch sensor chrusher , owner is going to fix this , drivetrain needs to be tensioned and chruser and moving parts needs lubrication, Crusher wear OK no visable welds or cracks on Crusher , not operationally tested 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40910 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Gjdpfxszk Igqj Aa Eoud 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), For sale is a used TOP MASTER planing machine FS 350 with a planing and thicknessing width of 350 mm. The machine is in good condition and has been refurbished and inspected by our qualified personnel. (fully functional) Godpfxezltigj Aa Ejud Technical data: - Planing and thicknessing width 350 mm - 3 knife shaft (strip knives) - Planing table length 1800 mm - Thicknessing height 200 mm - Planing table flaps - Drilling support - dust extraction possible The planing machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planing machine, thicknesser, thickness, Felder Reference: R-N3011

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 87 kW (118.29 HP), type of input current: three-phase, type of cooling: air, overall weight: 781 kg, input voltage: 400 V, total width: 2,130 mm, total length: 2,280 mm, total height: 1,330 mm, warranty duration: 12 months, heating capacity: 93.3 kW (126.85 HP), AIRCOOLED CHILLER/HEAT PUMP CARRIER 30RQ 090RAPI1984 87 KW/93.3 KW Cooling capacity: 87.0 kW / 24.74 tons (12/7 — 35°C) Heating capacity: 93.3 kW / 26.53 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss DSF200A4ACA (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Grundfos AC25-125, expansion vessel. Dimensions: 2.28x2.13x1.33 m Weight: 781 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS Gusdpfx Aaozldz To Eed The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 41 kW (55.74 HP), type of input current: three-phase, type of cooling: air, overall weight: 501 kg, input voltage: 400 V, total width: 1,070 mm, total length: 2,050 mm, total height: 1,330 mm, warranty duration: 12 months, heating capacity: 44.4 kW (60.37 HP), AIRCOOLED CHILLER/HEAT PUMP CARRIER 30RQ 040R A0171 41 KW/44.4 KW Cooling capacity: 41 kW / 11.66 tons (12/7 — 35°C) Heating capacity: 44.4 kW / 12.62 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss DSF090A4ACA (scroll) Godpfx Aaezldkhj Esud Type of refrigerant: R32 Number of fans: 1 pcs. Hydraulic module: 2 pcs. water pump Grundfos AC25-125 (Frequency inverter), expansion vessel. Dimensions: 2.05x1.07x1.33 m Weight: 501 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, functionality: fully functional, mileage: 178,243 km, power: 107 kW (145.48 HP), first registration: 07/2020, fuel type: diesel, empty load weight: 2,970 kg, overall weight: 3,500 kg, tire size: 225/65 R 1 6C, axle configuration: 4x2, wheelbase: 3,682 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, Year of construction: 2020, operating hours: 785 h, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, onboard computer, power assisted steering, sliding door, soot filter, start-stop system, traction control, RENAULT MASTER F3500 L2H2 2.3 DCI 145 – EURO 6 – 12.00 M TELESCOPIC PLATFORM FIRST REGISTRATION: 07/08/2020 178,243 KMS ENGINE: 2.3 DCI 145 HP EURO 6 STANDARDS AD BLUE PARTICLE FILTER Gjdpfxszky Rnj Aa Ejud 2-SEATER CAB WHEELBASE: 3,682 MM ABS – ASR – ESP – BAS – AIRBAG 6-SPEED MANUAL GEARBOX CRUISE CONTROL ON-BOARD COMPUTER AIR CONDITIONING BLUETOOTH RADIO ELECTRIC WINDOWS AND MIRRORS CENTRAL LOCKING TELESCOPIC PLATFORM, BRAND: FRANCE ELEVATEUR, TYPE: 121 FT: CE STANDARDS, YEAR 2020 BASKET: 1 PERSON, 120 KGS WORKING HEIGHT: 12.00 M PLATFORM HEIGHT: 10.00 M MAXIMUM OUTREACH: 6.50 M MAXIMUM WIND SPEED: 12.50 M/S 785 HOURS OF USE TIRES: 225/65 R 16 C GVW: 2,970 KGS MAXIMUM AUTHORIZED WEIGHT: 3,500 KGS

Condition: used, Year of construction: 2021, REF: MM6437 1 x Seveo Fluss 2x cyclised pump for Intamac filler, with shut-out valves. Mounted on stainless-steel frame. Guedpfx Aajza Txxe Ejd Manufacturer - Seveo Fluss Model - VM1000B. Date of manufacture - 2021. Overall dimensions - 1130mm long x 450mm wide x 800mm high.

Condition: good (used), Finger end mill, end mill, milling cutter, roughing end mill, cylinder candle cutter -Manufacturer: Master Fraisa, roughing end mills, 3 pieces -Fraisa: 2 pieces Ø 40 mm type 40 0660 TG125 Stg250 -Master: 1 piece Ø 32 mm type 770 CX 120 STG 207 bf -Price/Delivery: complete: only complete -Transport dimensions: 205/110/40 mm Guodpfx Aaeylhive Eed -Weight: 3.3 kg

Condition: used, Tires, solid rubber tires, forklift tires, complete wheels Guedpfx Aeututcsa Eed -Handover: in current condition as viewed -Tire condition: see photos -Manufacturer: Master Solid, solid rubber tires type Super Elastic 2 pieces -Tire size: 6.50-10 RIM 5.00F-10 -Bolt circle: Ø 150 x 13 mm -Recess: Ø 120 mm -Price/Delivery: complete -Dimensions each: Ø 570 x 160 mm -Weight: 48 kg/piece

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor -Manufacturer: Axial Pump, hydraulic pump -Type: APVC-13 -Shaft: Ø 16 x 40 mm Gjdpfxsyzfh Ae Aa Eeud -Bolt circle: Ø 64 mm M6 -Dimensions: 245/200/H250 mm -Weight: 9.3 kg

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 77.4 kW (105.23 HP), type of input current: three-phase, type of cooling: air, overall weight: 682 kg, input voltage: 400 V, total width: 2,180 mm, total length: 1,160 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 80.2 kW (109.04 HP), AIRCOOLED CHILLER/HEAT PUMP PANASONIC P-AQAZ0075HA.EC 77.4 KW/80.2 KW Cooling capacity: 77.4 kW / 22.01 tons (12/7 — 35°C) Heating capacity: 80.2 kW / 22.8 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland YP154K1T-TFD-GCV (scroll) + 1 pcs. Copeland YP182K1T-TFD-GCV (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Dimensions: 1.16x2.18x2 m Weight: 682 kg Working hours: 60/68 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Guedpfx Aaszi Dq As Eed The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 20 kW (27.19 HP), type of input current: three-phase, type of cooling: air, overall weight: 266 kg, input voltage: 400 V, total width: 1,480 mm, total length: 510 mm, total height: 2,010 mm, warranty duration: 6 months, heating capacity: 20 kW (27.19 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2014 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi ANB42FPJMT (scroll, inverter) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2T/0,45 COIB, buffer tank 112 l. Dimensions: 0.51x1.48x2.01 m. Weight: 266 kg. Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; Godpfx Aaszi Dhno Eeud - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 349.6 kW (475.32 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,800 kg, input voltage: 400 V, total width: 2,200 mm, total length: 5,160 mm, total height: 2,450 mm, warranty duration: 12 months, heating capacity: 363.1 kW (493.68 HP), AIRCOOLED CHILLER/HEAT PUMP AERMEC NPG1200A4 349.6 KW/363.1 KW Cooling capacity: 349.6 kW / 99.4 tons (12/7 — 35°C) Heating capacity: 363.1 kW / 103.24 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. 4-pipe system Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland YP485K1T-TED-GCR (scroll) + 2 pcs. Copeland YP233K1T-TED-GCR (scroll) Type of refrigerant: R32 Number of fans: 8 pcs. (Frequency inverter) Dimensions: 5.16x2.2x2.45 m Weight: 3800 kg Working hours: 105/105/630/630 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available Gusdpszi Ddiefx Aa Eod - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Promoted by APEXPUMPS Bristol UK -type: HPV32.2-7-30-CDAAKR -serial number: 110150-02 -inclusion dimensions: 1650x400x500mm -operating pressure: 27 bar -max. pressure: 40 bar -mass flow: 360L/min -lifting height: 270m -electrical data: 400V; 30kW Gusdpfxot A U H Is Aa Esd

Condition: like new (used), Chemical pump, slurry pump, chemical industrial centrifugal pump, used machine with explosion-proof motor Manufacturer: CEMP International -type: Bredel HOSE Pumps SP/32 -inclusion size: 1210x670x840mm -stump size: DN50 -electrical data: 400V; 6.3A Gsdsttvtvjpfx Aa Esud

Condition: used, Technical specifications: Gsdpfxszia Dxj Aa Eoud Max. planing width: 530 mm Cutterhead diameter: 120 mm Number of knives: 4 Total length of tables: 2900 mm Table height adjustment Tilting outfeed table Safety switch Power supply: 380 V Motor power: 5 kW Overall dimensions: Length: 2900 mm Width: 1300 mm Height: 1300 mm

Year of construction: 2026, operating hours: 24 h, condition: new, Equipment: CE marking, It is made of "304 Cr N􀇕" quality material. It can be produced from 50 kg to 5000 kg. Areas of Use: It is used in powder chemical, spice, feed, pharmaceutical and cosmetic 􀇕industries. Gusdpfx Aozhryioa Esd

Year of construction: 2026, operating hours: 24 h, condition: new, Equipment: CE marking, It is made of "304 Cr N􀇕" quality material. Capacity: 1.5 Tons per Hour Cleaning T􀇕me 15 m􀇕n Cleaning Rate: 100% Cleaning temperature: 70 °C Engine: 7.5-11 kW Double speed engine Gusdpszg H Hnofx Aa Esd

Year of construction: 2026, operating hours: 24 h, condition: new, Equipment: CE marking, It is made of "304 Cr N􀇕" quality material. Gjdpfx Aaozg Hqts Ejud Omasumr is used in the wasi􀇕ng process. Performs 10 - 20 cleaning tasks. It has a 1.5 kW - 2.2 kW motor.

Year of construction: 2026, operating hours: 24 h, condition: new, Equipment: CE marking, It 􀇕s made of ”304 Cr N􀇕” quality material. Suitable for use in food product􀇕on facilities, meat 􀇕integrated facilities, schools, dormitories, factories etc. Gujdpezg Hghofx Aa Esd It requires 220 v electricity.