Used Llc Evolutioner Manual Folding Machine Mb-3150 for sale (77,178)

Condition: new, Year of construction: 2025, Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels. So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing panels. This machine could be produced for using with 220V or 380V electric lines. You can also purchase with roofing seam machine: Pjdpfehz Twwjx Adlorc additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; cutting knife; metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation. Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business. To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Heidelberg Stahlfolder TD-112 Year: 2009 Mach. no. 1224427271 PD 112 Topline pallet feeder Performance package PD 112 (double valve suction wheel, more powerful compressor, additional hold-down device) 1st station 4 folding pockets 2nd station 112cm 4 folding pockets Twin system in the 2nd station for double-flow production including transfer table, short feed ruler, 2x split sheet stop pocket, 1x split separate switch, second light sensor each at the folding unit output 1st and 2nd station, additional transport and drive rollers 3rd station 78 cm 4 folding pockets SBP 86 Delivery Automatic sizes Soundhoods Compressor Psdjwpgpdopfx Adlerc Machine is in very good condition!!!

Condition: good (used), STAHL T36/4 Pharmaceutical Folding Machine Made in Germany. The world’s highest-class folding machine. Very good condition. Infinitely variable feed and folding speed adjustment. Module with 4 cassettes. Elevator feeding (high pile). Electronic delivery with speed control. The machine is ideal for folding pharmaceutical leaflets thanks to its low fold and large number of cassettes. Cassette soundproofing. Technical specifications: Pedpjz R Iqhsfx Adlerc Max size: 360x550mm Min size: 80x100mm Weight: 350kg 380V power supply

Condition: used, Year of construction: 1994, Technical details: sheet width: 3200 mm plate thickness: 4 mm distance between columns: 3200 mm connected load: 9 kW Prjdpfe Agnm Rox Adljc connection voltage: 380 V Total power requirement: 7,5 kW bending angle max.: 180 ° air-pressure connection: 6 bar depth stop: 10 - 1550 mm adjustment speed: 200 mm/sec Weight approx.: 5800 kg dimension machine approx.LxWxH: 4,6 x 2,1 x 2,6 m Control system: RAS Multibend 9000 CNC with color monitor RAS 74.30 – Hydraulic Folding Machine The RAS 74.30 is a robust, hydraulically operated folding machine manufactured by the German company Reinhardt Maschinenbau GmbH (RAS), based in Sindelfingen. The machine is designed for precise bending and folding of sheet metal in industrial applications.With a working and bending length of 3,200 mm and a maximum sheet thickness capacity of 4 mm for steel, the machine is particularly suitable for manufacturing long profiles, cladding panels, housings, ducts and general sheet metal constructions.During the folding process, the workpiece is clamped between the upper and lower beams. The folding beam then performs a swivelling movement, forming the sheet metal to the required angle. This process enables controlled bending while minimizing material stress, particularly when processing large-format sheet heavy-duty machine construction, with a net weight of approximately 5,800 kg, ensures excellent stability during the bending process. The installed drive power is 7.5 kW. *

Condition: good (used), Year of construction: 1989, sheet width 2520 mm plate thickness 2.5 mm bending angle max. 135 ° stroke of upper beam 250 mm adjustment UW 80.0 mm back stop - adjustable ca. 925 mm work height max. ca. 935 mm total power requirement 6.0 kW weight of the machine ca. 2500 kg. dimensions of the machine ca. 3600 x 1650 x 1425 mm good condition (!!) Prodpfxjy Raiyo Adlsc with 1x split set of goat foot tools Equipment: - dynamic, powerful motorized folding machine - SCHRÃ?DER NC control unit "POS 800" with LCD display * Fast programming of individual parts - Control panel, front right - NC electro-motorized back gauge * with rear sheet support surface - Manual lower beam adjustment - 1x free-moving double foot switch - 1x extra bending machine .. B = 10.0 mm * built-in bending rail with .. B = 25.0 mm - 1x split set of goat foot tools ... H = 130 mm * a pointed rail is installed - Operating instructions

Condition: new, functionality: fully functional, Fiber Laser Cutting Machine for Sheet Metal – Different Sizes & Laser Powers Description Industrial CNC fiber laser cutting machine for high-speed and precise cutting of sheet metal. Suitable for general metal fabrication as well as production of HVAC components, ventilation parts, electrical cabinets, machine enclosures, brackets, roofing and facade elements and other sheet metal products. Predpjztx Epsfx Adlec The machine can be configured individually according to the customer's required working area, material type and cutting thickness. Suitable materials: Carbon / mild steel Stainless steel Galvanized steel Aluminum Brass Copper Standard configuration example Working area: 1500 × 3000 mm Laser power: 1500 W Cutting thickness: approx. 0.5–10 mm, depending on material and cutting conditions Positioning accuracy: up to ±0.01 mm Max. idle speed: 80–110 m/min Acceleration: up to 1G Cooling: water cooling Cutting gases: oxygen / nitrogen / compressed air Power supply: 380 V, 3 Ph, 50/60 Hz File formats: DXF, PLT, AI, NC and others Other working areas and laser powers available Depending on the production task, machines can be supplied with different working areas, including: 1300 × 2500 mm 1500 × 3000 mm 1500 × 4000 mm 1500 × 6000 mm 2000 × 6000 mm 2500 × 6000 mm 2500 × 12000 mm 2500 × 14000 mm Available laser powers include approximately: 1.5 / 2 / 3 / 6 / 8 / 12 / 20 / 30 / 60 kW, depending on machine configuration. The catalogue includes large-format systems up to 2500 × 14000 mm and laser sources up to 60 kW. Higher laser power allows processing of thicker material and/or significantly increases cutting speed on thinner sheet. The required laser power is selected according to steel grade, maximum thickness, required cutting speed and cutting gas. Available configurations Open single working table Exchange table Fully enclosed machine Large-format cutting machine Automatic loading/unloading Dust and fume extraction Automatic lubrication Different laser powers and table dimensions Applications Ideal for sheet metal processing, HVAC and ventilation production, steel fabrication, machinery manufacturing, electrical enclosures, construction components, metal furniture, roofing and facade production. The machine can be integrated with press brakes, guillotines, roll forming machines and other sheet metal processing equipment. SEO Keywords fiber laser cutting machine, CNC laser cutter, sheet metal laser cutting machine, metal laser cutter, steel laser cutting machine, fiber laser 1500W, 3000W laser cutter, 6000W fiber laser, 12000W laser cutting machine, high power fiber laser, large format laser cutting machine, sheet metal cutting machine, CNC metal cutting machine, industrial laser cutter, galvanized steel laser cutting, stainless steel laser cutter, HVAC laser cutting machine, metal fabrication equipment, 1500x3000 laser cutter, 2000x6000 laser machine, 2500x12000 laser cutter.

Condition: good (used), Year of construction: 2001, sheet width 2520 mm plate thickness 3.0 mm 350 mm Swing beam adjustment 80.0 mm back stop - adjustable ca. 1.000 mm Control FM 5.1 B upper clamping bar adjustment 20.0 mm/sek bending speed 37.0 Grad/sek total power requirement 4.5 kW weight ca. 3.250 kg The ideal solution for individual and series production. A modern design with particularly high rigidity. Designed for continuous performance. Features: - Dynamic, powerful electro-motorized folding machine * Upper beam bending beam drive by geared brake motor * Bending beam drive with roller bearings - FASTI CNC control "TOUCH" - FM 5.1 B * Swiveling control unit, front right * 11.3" color LCD touch screen display * Manual / automatic mode selectable * Input of actual/target values possible (X axis / angle etc.) * Program memory * Tool memory - CNC electro-motorized back gauge * with rear sheet support surface - CNC electro-motorized folding beam adjustment - 1x extra set of FASTI split scribing tools - height : 120 mm - EMERGENCY OFF button at the front, with extension cable - 1x free-moving double foot switch - 1x free-moving foot switch - original operating instructions - Smallest bending leg length in mm to sheet thickness : * 7.0 mm with 0.75 mm sheet thickness * 8.5 mm for 1.00 mm sheet thickness * 12.0 mm for 1.50 mm sheet thickness Psdpfjy Umd Sox Adlerc * 16.0 mm for 2.00 mm sheet thickness * 19.5 mm for 2.50 mm sheet thickness * 25.0 mm for 3.00 mm sheet thickness

Condition: used, - R800 round stack feeder - Navigator control system - 6 parallel folding pockets - 2 folding knives in the cross folding station - 1 additional folding pocket after the 1st transverse fold - Folding rollers made of soft PU Pedpfxe Afum Do Adlorc

Condition: ready for operation (used), Mahr Marshaft MAN 400 manual shaft measuring station, shaft measuring machine, measuring machine Mahr Marshaft MAN 400: Measuring range, length: 400 mm Year of manufacture: 2011 MarCheck: Mahr UTS 90-M: Mahr LTS 100: Mahr DMS 120 Year of manufacture: 2014 Year of manufacture: 2016 Year of manufacture: 2011 Year of manufacture: 2011 You are welcome to visit us for an inspection. Pedozmr D Eepfx Adlorc We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. Pjdpfxjzuykve Adlorc 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: excellent (used), functionality: fully functional, total length: 1,820 mm, total width: 2,244 mm, empty load weight: 600 kg, Equipment: documentation/manual, We are selling a FAS 480 case erector directly, in the right-hand version. Prsdo Aaq Nqepfx Adlec The Tünkers FAS 480 is a semi-automatic case packing machine (case erector/carton packer) designed to work in conjunction with folding and gluing machines (folder-gluers). Its main purpose is to optimize the process of collecting ready-made boxes and increase the efficiency of the production line. The machine is fully functional and complete. The machine comes with the original manuals and diagrams.

Condition: used, Year of construction: 1998, Technical details: sheet width: 2540 mm plate thickness: 5,0 mm distance between columns: - mm rated current: 28,91 A total power requirement: 13,52 kW control voltage: 230 V connection voltage: 400 V upper bending cheek adjustment: 350 mm knife length: 2540 mm bending angle max.: 135 ° Weight approx.: 5950 kg Prjdpfoz Hixqox Adljc dimension machine approx.LxWxH: 3,81 x 2,80 x 2,05 m - Motorized folding machine - Manual and automatic operating modes - Interchangeable upper beam rails - Quick clamping system - Lower beam rails - Folding beam rails - Bending center point correction - Manual and automatic operation - Motorized adjustable back gauge - Back gauge with spring-loaded fingers - Digital display - Central lubrication system - Lower beam adjustment: 80 mm *

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Like new folding machine! The DIN A3 folding machine IDEAL 8345 is IDEAL's top-of-the-line model, offering speed and versatility. The various folding types are set intuitively via a touchscreen display with a memory function. The paper formats DIN B6, A5, B5, A4, B4, and A3 are automatically recognized. The IDEAL 8345 processes paper formats from DIN B7 to DIN A3 with paper weights of 50 – 160 g/m² (up to 230 g/m² for single folds). The paper is fed from the feeder table using a friction-based paper feed system with three rubber rollers. The folding speed is adjustable. Prsdpfxszcybxe Adljc Automatically adjusted. With just the touch of a button, you select the desired folding type, and the stops in the folding pockets are automatically and precisely adjusted by an electric motor. This fully automatic function saves time and guarantees exact results – without any manual readjustment. It doesn't get more efficient than this. Memory function for 36 folding positions – can be recalled with the push of a button. The folding rollers can be easily removed using a quick-release mechanism for simplified cleaning. Speed: up to 14,400 folds/hour Folding types: single fold, gate fold, Z-fold, double fold, altar fold, Z-fold with stitched edge Stacking table: up to 500 sheets Weight: 29.5 kg 230 volts The machine is located in our showroom and can be viewed by appointment. Immediate shipping is possible.

Condition: used, total length: 7,100 mm, total width: 1,300 mm, total height: 1,300 mm, Year of manufacture: 1987 Colour: Green Empty weight: 4.000 kg Price: On request - Year: 1987 - Serial number: 301/405 - Drive system: Conventional - Folding machine model: Semi-automatic - Drive system: Hydraulic - Power [kW]: 2.2 - Bending direction: Upward bending - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 6020 - Max. opening [mm]: 150 - Stop type: Manual - Angle adjustment: Manual - Max. bending angle [°]: 135 - Options: Long folding machine Prodpfxszrhtye Adljc - Transport dimensions: 7100mm x 1300mm x 1300mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1963, machine/vehicle number: 023-0281, Item No. 21275 Manual Swing Bending Machine Technical data: - max. working width 1030 mm - max. material thickness 2 mm - bending angle approx. 0 - 135° - lockable with end stop - upper beam is operated with a lateral hand crank - max. stroke of upper beam 120 mm - max. adjustment of bending beam 45 mm - bending process is supported by an eccentric weight - space requirement approx. W 1750 x H 1120 x D 450 mm Pjdpfjzy Rg Sox Adlerc - weight approx. 620 kg

Condition: new, Year of construction: 2025, Metal hemming machine HR-2 Metal hemming machine HR-2 is the next model in the production line after hemming roll former HR-1 model. Instead of HR-1 machine that can form 5-8 mm hem lock, metal hemming machine HR-2 can make 6-14 mm hem. Therefore, customer can get better products range depends on requirements, seven forming stands of machine makes it possible. Metal hemming machine HR-2 can make common sheet metal processing operation goes much more easier, with better quality and same repeatability. In standard way such operation can be perform with manual sheet metal bending machine, so two workers have to make bends step by step to get necessary product. Podpfxjrklxvj Adlerc Metal hemming machine HR-2 can make such operation much more efficiently. You can roll both sides simultaneously or each side step by step. To make it gradually can be good idea when you have large variety of elements you need to produce with different widths so no reason to readjust width of machine for each operation. We use special tool steel to make rolls of machine so can provide longtime living period. Hemming rollformer HR-2 can make unlimited length panels and make customer’s work much easier. Therefore, you can save a lot of time with our metal hemming machine HR-2 and make your production process much more efficient.

Condition: good (used), 990 USED manual dough roller. EXTERNAL DIMENSIONS (in cm.): - H: 120 (folded: 210), - W: 280 (folded: 155), Podpfsw Hhpgjx Adljrc - L: 121, - left wing: 135/66 - right wing: 131/65 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: like new (used), machine/vehicle number: 31062, Folding Machine Specifically designed for pharmaceutical folding, similar to Stahl T 36 machines. Minimum fold: 20 mm The machines are available in 360 mm or 470 mm formats. Machine capacity: 2 to 12 bags Optional: Vertical stacker Psdpfj Agckgjx Adlorc Technical details: - Model 360 - Maximum format: 470 x 850 mm - Minimum format: 50 x 85 mm - Minimum fold: 20 mm - Maximum speed: 180 m/min - Paper thickness: 40-250 gsm - Weight: 1500 kg - Output in a stepped format - Noise-reducing covers

Condition: good (used), Horizon AFC-546 AKT Folding Machine Fully operational, ready for production. The machine is from the first owner. Very good condition. Rollers recently refurbished. Manufactured by Horizon, Japan Equipment: 6 parallel cassettes 1 electronic knife 2 knife cassettes Maximum format: 540x760mm; min. 120x172mm The machine is set up entirely using a touchscreen control panel. The kit includes: – tool kit – additional components – user manual – compressor Prodpfjzz Hgqox Adlec

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 101258050, Submission of a bid constitutes an obligation for timely collection no later than 31/12/2025! The offer includes: Bacciottini Pit Stop WFD2H Speed (Serial number: WFD2H 1010, Year of manufacture: 2010) MB PFNET 52/4-40-ART52 (Serial number: 101258050) TECHNICAL DETAILS Number of pockets: 4 Prjdpoxyh E Sofx Adlec EQUIPMENT 2-bar scoring system Inline Extended feeder MB folding machine Gatefold pocket Delivery

Condition: good (used), Heidelberg Stahlfolder KH66-6KTL +SKPD 66 + gluer Machine in perfect condition, ready to work. RFH-66 continuous feed Prede Af E D Tjpfx Adlec BCUH-66 folding module Year of production 2005 6 cassettes 2 electronic knives side cassette with 1 knife SKP.D 66 press auxiliary roller for perforation First rollers divided for gluing Gluing machine with pneumatic nozzles Max format: 660x1200mm two LCD control panels Counter with packaging, speed control, etc. Feeding on a suction roller Soundproofing covers. Window cassette. Documentation, additional tools and equipment.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3,358 h, machine/vehicle number: K22268, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: JORNS, working width: 6,410 mm, folding beam adjustment: 200 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, back gauge speed R-axis: 283 mm/s, back gauge travel distance R-axis: 1,250 mm, back gauge travel distance Z-axis: 1,250 mm, overall weight: 13,000 kg, total length: 8,500 mm, total width: 3,354 mm, total height: 1,938 mm, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, We offer this used Jorns JDB-150G-DP-1250-JC100-6.4-dsp panel bending machine for sheet metal, manufactured in 2023. Year of manufacture: 2023 Model: JDB-150G-DP-1250-JC100-6.4-dsp Rated current: 80 A Operating voltage: 3 × 400 V Frequency: 50 Hz Control voltage: 24 VDC Prodpjz Dilljfx Adljc Maximum hydraulic pressure: 210 bar Maximum pneumatic pressure: bar If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: good (used), functionality: fully functional, Year of construction: 1988, sheet width 2500 mm Pedpfxjzxiauo Adlorc plate thickness 3 mm weight of the machine ca. 1,7 t

Condition: good (used), Press brake with a working length of up to 6.2 m Suitable for sheet metal up to 1.25 mm thickness Psdj Afw U Ropfx Adlorc With rear manual back gauge With roller cutter With Knauf profile head

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Prodpfx Adstp H Erelec Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15