Used Kaweco Manure Spreader for sale (579)

Year of construction: 2023, condition: used, New: Yes Colour: Red Hodpfx Ajx S N Smof Sou Carrying capacity: 8.000 kg Dimensions (LxW): 450 x 200 cm

Year of construction: 2024, condition: used, New: Yes Hjdpfjwf S Epsx Af Sou Carrying capacity: 5.000 kg Dimensions of cargo space: 375 x 175 x 50 cm Cargo space capacity: 3.280 l Tyre size on axle 1: 10/75-15.3 Tyre size on axle rear: 10/75-15.3

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Hjdezmyviopfx Af Ssu Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, working width: 1,800 mm, cutting height (max.): 30 mm, compressed air connection: 10 bar, An exceptional opportunity to acquire a fully integrated, high-performance automated multi-ply CNC cutting solution. Commissioned in August 2023 and kept in excellent condition, this complete VetiGraph / Serkon Makina setup is available for immediate purchase. Full UK delivery, professional decommissioning, transport, and complete onsite re-commissioning are all included to get your facility running quickly and smoothly. Get a complete factory upgrade at a fraction of the cost of new equipment. Package includes: * Serkon MC30 Multi-Ply CNC Cutter: 30mm compressed cutting height, 180cm width, continuous conveyor, drill and vortex knife cooling. * MN1 Fabric Spreader & ML2 Roll Lift: Automatic tension-free laying with a 9m x 2m air-flotation table. * Complete CAD/CAM Suite: Includes VetiGraph Pattern Design, Automated Marker Nesting, and FastJet Twin-Head Plotter. Hjdpez A D Rysfx Af Sou * iDigit Photo Digitiser: Quickly converts physical patterns to vector files. Full Turnkey Package: Includes UK delivery, complete installation, fully setup commissioning, 7 days of total onsite training, and a 6-month warranty. Avoid long manufacturer lead times and substantial capital outlay. This complete system is ready for immediate inspection in Preston and fast deployment to your facility. Delivery & Installation: * For deliveries outside the UK, the machine is supplied on an Ex Works (EXW) basis. The buyer is responsible for arranging and covering the cost of international transport, import duties, taxes and any local delivery charges. * Installation and commissioning can be provided by our engineers at an additional cost. For overseas installations, additional charges will apply to cover engineer travel, accommodation and associated expenses. * Please contact us for a quotation for installation and commissioning to your location.

Condition: like new (used), functionality: fully functional, Working width: 300mm Hedpfx Afjz E U E He Sou Manual adjustment of roller spacing Two glue application speed settings Safety switch Mobile design

Condition: ready for operation (used), functionality: fully functional, Working width: 1300 mm Manual adjustment of roller spacing Cleaning brush Safety switch Mobile design Hjdsz E Rlpspfx Af Sju

Condition: used, Year of construction: 2023, working width: 9 mm, Equipment: compressed air brake,

Condition: used, Year of construction: 2011, General overhaul 200 hours ago at Holmer Mercedes V8 engine with 598 hp / PowerShift transmission 18v/6r 5.70 long intake arm Xenon headlights Air conditioning / Trimble track guidance / Hodor Ty Nwspfx Af Sou

Condition: good (used), Year of construction: 1996, Field of application: Agriculture Empty weight: 7.500 kg Technical condition: good Visual appearance: good Production country: DE Please contact Vink Machinery for more information Unimog U1400 Rail * 1996 * 142505 kilometers * Diesel Hsdpfx Afjzg N A Se Sju * 4x4 * 7500 kg own weight * Equipped with snow plow * Equipped with sand/salt spreader * equipped with Rail wheels

Year of construction: 2007, condition: used, New: No Availability: in stock Hedpfxez Hmu Ao Af Ssu Volume of the tank: 0.8 m^3

Condition: used, Year of construction: 2023, with ball head K80 for 3to drawbar load Wheel arches per axle for plastic / fabric mudguards Air suspension Agroturn, 2,225mm Preparation for forced steering / ventilation Air bellows on first axle Tandem eccentric worm-drive pump type Wangen / BOMECH towing shoe Hodpfx Afjt Dnuue Ssu

Condition: excellent (used), functionality: fully functional, Working width: 600 mm Manual roller gap adjustment Safety switch Mobile design Hedpfx Afez D Uhfe Sju

Condition: used, Year of construction: 2024, Tank Intake manifold with quick coupler left + right Swivel element with / intake manifold rear Suction arm preparation RAL 7016 anthracite gray TÜV certificate / 40 km/h Underride guard with illumination! SPECIAL PRICE LASER SALE!!! / Plexiglas cover Hsdpfx Afsr E Avwo Ssu

Condition: used, Year of construction: 2024, Wedge flange gate valve 6'' VL with back Wedge flange gate valve 6'' VR with / back Blind cover galvanized, for quick coupler 6' Bracket for suction nozzle / VR 1 swivel joint Docking device NW200 rear top for TAV tank size / 25.250l Bereifu Hsdpfott A Umsx Af Sou

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 35120025 (inkl. Zubehör 35120030/35120035/35120040), type of input current: three-phase, space requirement height: 2,010 mm, space requirement length: 2,374 mm, space requirement width: 754 mm, Sollich nut mixing unit, type NM 200 VA, year of manufacture 2021, for the continuous mixing of dry ingredients into chocolate, fat, and spreadable products. Performance: • max. 1,200 kg/h of spreadable product with 5% dry ingredients (60 kg/h) • max. 1,200 kg/h of spreadable product with 10% dry ingredients (120 kg/h) Equipment: • retractable mixing screw for simplified cleaning, recommended for frequent product/color changes • 2 installed rotary valve feeders TD 1 (machine no. 35120030 and 35120035), arranged opposite each other, each with a level switch and a 150-liter hopper. This allows two different dry ingredients to be dosed in parallel or double the dosing capacity for one dry ingredient to be achieved. • Double-walled collection hopper at the mixer outlet with emptying pump SKP 1000 L-VA (machine no. 35120040) • Unheated connecting pipe attached to the side of the lower container section to the hopper for complete emptying via the attached rotary lobe pump SKP 1000 L-VA, can be shut off on both sides with flat flap valves, pipe can be removed via milk pipe fittings and quick-release couplings. • Hot water circulation system with water-water heat exchanger and circulation pump to supply the mixer, collection hopper, emptying pump, and piping to the filling system, for connection to the customer's cold water supply. • Stainless steel control cabinet for housing the power electronics • Visualization and operation are carried out ex works via the HMI of the associated tempering machine; a separate operating panel is not part of the unit. • Completely installed on a mobile stainless steel frame with swivel casters or lifting tabs for moving with a lifting device, frame with ergonomic handle, all media connections are pluggable or with quick-release couplings. This makes the unit mobile and can be switched between several lines. For operation with another control system, an adjustment of the visualization is required; the power electronics are included in the supplied stainless steel control cabinet. Connection requirements: • customer's cold water for the hot water circulation system Hedezzvhdopfx Af Sou • 400 V, 3 phases, 50 Hz + neutral + earth Condition, history and process: Year of manufacture 2021, delivery and commissioning by Sollich in week 40/2021, approximately 180 operating hours. Used exclusively for palm oil-free spreads including nut-containing products, stored dry in Wuppertal since the end of 2024, inspection by appointment. Documentation and conformity documents are available. Purchase value in 2021 according to order confirmation: €116,830 (unit complete including rotary valve feeders, emptying pump and stainless steel frame). Sale from business to business with exclusion of warranty, technical specifications according to manufacturer's documents, subject to errors. This nut mixing unit is also available as part of a complete tempering and mixing system (including Turbotemper TE 1600 D and cooling unit), see advertisement ID A22725782.

Condition: used, Year of construction: 2023, Suction hose Perrot system, Ø150 mm, 5m Jurop vacuum compressor PNR 155 (15,200 / ltr) Plastic mudguard for Ber. Profi filling aid NW 200 front / swivel element rear Wedge flange slider 6 inch VL Wedge flange slider 6 inch / VR Bracket for Hodpjr T Rfrsfx Af Ssu

Condition: good (used), Year of construction: 1983, functionality: fully functional, THOROUGHLY CLEANED AND REPAINTED MACHINE Working width 1,300 mm Roller diameter 149 mm Feed rate 22 m/min Max. pass height approx. 100 mm Mobile version with 2 rollers on the rear machine frame Connection data: Hsdpfezxr Uhox Af Ssu 400 V, 50 Hz, 3-phase, N

Condition: excellent (used), functionality: fully functional, Working width: 800 mm Maximum element height: 100 mm Manual adjustment of roller spacing Simultaneous application of adhesive to the top and bottom surfaces Hedpfx Afsz Agvhe Seu

Condition: excellent (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, machine/vehicle number: LU19H00399, input voltage: 400 V, type of input current: three-phase, input current: 26 A, Nordson VPUR-Slug unit. PUR adhesive melter with 5-meter hose and adapter nozzle. Fully functional. 500 operating hours. Single gear pump. Two hose connections. Additionally, includes many new consumable parts and a new 5-meter hose. Hodpfx Asy Hl Nkof Sou

Condition: excellent (used), functionality: fully functional, working width 1300 mm cleaning brushes with automatic feed adhesive dosage adjustment via dosing roller Hsdpfsz D Acdex Af Sju safety switch

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working width: 30 cm Adjustable glue application rate Single-sided glue application Hodpfx Afszxpvvs Ssu Emergency stop button (mushroom switch) Feed table with rollers Total table length: 130 cm Weight: 150 kg 380 V Year: 2003

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, working width: 200 mm, working height: 40 mm, Equipment: documentation/manual, Impregnation machine / Coating machine Manufacturer: Schiele Type: Impregmat VM Mini Year of manufacture: 2016 Board coating machine with brush application, suitable for coating profiled boards, moldings, and construction timber. Suitable coating systems: Suitable for water-based paints and coatings Suitable for solvent-based paints, stains, and coatings Working width: approx. 30 - 200 mm Workpiece height: approx. 5 - 40 mm Workpiece length: from approx. 800 mm - endless Feed speed: approx. 20 m/min pneumatic double-diaphragm pump Stainless steel machine body for easy cleaning with roller conveyors before and behind the machine, length approx. 2000 mm each Hsdpfszpydrex Af Sou Documentation & wiring diagram available

Year of construction: 2007, condition: used, functionality: fully functional, empty load weight: 1,500 kg, total length: 6,000 mm, construction height: 2,400 mm, load capacity: 10,000 kg, construction width: 650 mm, Spreader Hedpfjz Ev E Ujx Af Seu Condition: Ready for use and fully functional Technical condition: very good Description: Container spreader 20 Container spreader 20

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system Hodpfx Ajy Alcisf Sou • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: ready for operation (used), functionality: fully functional, External dimensions: 2500 × 1300 mm Stepless feed speed adjustment Year of manufacture: 2017 Hjdpfszxz H Hex Af Sju Motor power: 0.75 kW