Used Johnson Pressure Sensor for sale (19,530)

Condition: good (used), Pressure and differential pressure switches, transmitters, monitors, sensors, differential pressure indicators, differential pressure switches -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack Nlsdpfjzt Nt Rsx Ag Ish -Type: 4 ADS-10 -Pressure: max. 25 bar -Quantity: 2x P/N 1089 x P/N 1089 0416-02 (see photos for connections) -Dimensions: 125/105/H85 mm -Weight: 0.9 kg/pc.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Nljdpfx Agozgq Szj Ieh Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. It has process connection thread of Pg 13.5, and its connector is of “VP” type Nlsdpfx Ajxv Dv Eeg Ish This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: excellent (used), Year of construction: 2019, operating hours: 300 h, functionality: fully functional, - HAMMELMANN HDP 202/4 - 2019, approximately 300 operating hours Nljdpfxj Afuzns Ag Ish - Installed in a 10' soundproof container - ES3™ control unit - Volvo® 235kW Stage IV AdBlue® / US EPA Tier 4 Final engine - ES1 - 1000 bar / 110 liters - ES2 - 3000 bar / 28 liters - Includes an extra head and plunger set. - Fully inspected and ready for operation.

Condition: used, Year of construction: 2001, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Nlsdpfsztyanjx Ag Ieh Volume: 32191 l Operating pressure: 5 bar Operating temperature: 20 °C Width: approx. 3850 mm Height: approx. 4420 mm Material: stainless steel 1.4301 Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: 1 cooling jacket (154 l, 2 bar, glycol), outlet DN65, manhole, safety valve, CIP pipe with spray head, manometer, ladder bar, sampling, temperatur sensor (PT100), crane eyelets Periphery: own temperature control

Condition: used, Year of construction: 2011, operating hours: 3,690 h, functionality: fully functional, machine/vehicle number: W09D500THBAD43025, operating pressure: 500 bar, total length: 3,695 mm, high-pressure hose length: 50,000 mm, total height: 2,026 mm, total width: 2,050 mm, pressure: 500 bar, empty load weight: 1,695 kg, input voltage: 12 V, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32.4 kW (44.05 HP), temperature: 150 °C, DGUV certified until: 11/2028, Dynajet 500TH 28 l/min at cold water Maximum pressure: 500 bar 3695 operating hours Recently serviced Imported to Sweden in 2026 Nlodpjz Eg Dhofx Ag Ioh WITH HOT WATER UP TO 150°C!!!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, overall weight: 579 kg, year of last overhaul: 2024, Equipment: documentation/manual, lighting, type plate available, Mitutoyo QVT1-X404P1L-D 3D CNC Multisensor Measuring Machine Enhanced application possibilities through the combination of tactile and non-contact measurement. Powerful CNC-controlled system for intelligent, simple, and fully automatic measurements. Nsdpfxe Afdr Aj Ag Ielh Multiple image processing filter functions ensure reliable results. Flexible switching of probe tip configurations with the MCR20 probe head changer. White LED transmitted light. White LED coaxial light. Programmable 4-quadrant LED ring light. Triangular pattern focusing for low-contrast surfaces. Programmable magnification changer with 1x, 2x, and 6x magnification. High-resolution CCD black and white camera. Resolution: 0.0001 mm "One-Click Tool" technology for optimal edge detection.

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: GP1000-GE1065BD, operating pressure: 220 bar, total length: 1,900 mm, high-pressure hose length: 20 mm, total height: 1,300 mm, total width: 1,200 mm, pressure: 220 bar, empty load weight: 160 kg, fuel: super 95, overall weight: 170 kg, water tank capacity: 1,000 l, warranty duration: 24 months, fuel tank capacity: 6 l, The Gaspper GP1000 high pressure washer is designed for the most demanding cleaning jobs in different areas of our economy. Mainly targeted areas are construction, agriculture, industry of any kind, as well as various public services. Depending on the specific requirements, the possibilities of use are almost endless. Key Features Petrol Engine: Briggs&Stratton XR950, 4-stroke, OHV Power: 6.5 HP / 4.7 kW Water pressure: 220 bar / 3.200 PSI Flow rate: 14 l/m The water tank with a capacity of 1000L and the 15L detergent tank, combined with a 4-stroke heat engine mounted on a solid metal frame, gives enviable independence from the running water and electricity cables. The machine can be used in the most isolated areas. The device is moved from one place to another with the help of a forklift or front loader. Package contents: High-pressure washer Pressure gun Nledpfx Agj Aayarj Ish 20m high-pressure rubber hose Stainless Steel Extension Lance Nozzle 0 ̊ Nozzle 15 ̊ Nozzle 25 ̊ Nozzle 40 ̊ Soap nozzle Waspper engine oil Operation manual Water Tank – 1000L

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 1,100 mm, total height: 1,805 mm, total width: 650 mm, pressure: 60 bar, type of input current: three-phase, empty load weight: 140 kg, input voltage: 400 V, fuel: electricity, heating capacity: 3 kW (4.08 HP), overall weight: 240 kg, water tank capacity: 100 l, temperature: 45 °C, input current: 16 A, The enclosed cabinet, made of stainless steel, delivers a high-pressure solution (up to 60 bars) for precise and optimal cleaning or degreasing of mechanical parts. This compact washing station operates in a closed-loop system, making it highly economical in terms of product usage and suitable for any maintenance workshop. STANDARD FEATURES: • Adjustable high-pressure washing pump, up to 60 bars • Foot pedal control • 60-micron filter • High-pressure spray gun • Compressed air blower inside the cabinet • Air blower for cleaning the window • LED lighting • Heating element controlled by an adjustable thermostat • Low-level control and safety cut-off • New gloves • Year: 2020 • Weight (kg): 140 • Dimensions (L x W x H mm): 1100 x 650 x 1805 • Work surface (mm): 850 x 650 • Payload (kg): 50 • Usable washing height (mm): 600 • Tank volume (L): 100 • Operating pressure (bar): 30 to 60 Nljdpfxez Tfbcs Ag Ioh • Pump flow rate (l/min): 14 • Heating power (kW): 3 • Electrical supply: 400V Three-phase – 16A • Pneumatic supply: 6 - 7 bars

Condition: like new (used), Year of construction: 2026, operating hours: 40 h, functionality: fully functional, pressure: 2,500 bar, year of last overhaul: 2026, We are selling our IBAK MicroGator with a UHP high-pressure water cleaning system for main pipelines DN 200–DN 800. The robot was only used for one project and has not been used since. * Only 4 months old Nedpfez Aupijx Ag Ielh * Used for only 5 working days * No signs of wear – like new * Equipped for Ultra High Pressure (600–2500 bar), compatible with Falch and Hammelmann * Original price: €66,000 * Our price: €50,000 (negotiable) The robot is currently located in the Czech Republic. However, after prior arrangement, it can also be made available in the Cham area in Bavaria. Filip Khol rohrsanierung1a.de

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. Nlodpoz Dhrqsfx Ag Ieh DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: used, Year of construction: 2011, operating hours: 8,176 h, functionality: fully functional, machine/vehicle number: WPUD500H0B2000955, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,070 mm, pressure: 500 bar, empty load weight: 1,630 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 34.5 kW (46.91 HP), DGUV certified until: 10/2026, Dynajet 500TH 30 l/min Nsdpez Egw Ujfx Ag Ijlh Maximum pressure: 500 bar 8176 operating hours Regularly maintained, recently serviced, not in operation during winter (only April–October) Owned by the same operator since new For cold water only; can be retrofitted for heating water.

Condition: used, Year of construction: 2019, operating hours: 196 h, functionality: fully functional, machine/vehicle number: W09D013KWKAD43636, operating pressure: 500 bar, total length: 2,910 mm, high-pressure hose length: 500 mm, total height: 1,770 mm, total width: 1,720 mm, pressure: 500 bar, empty load weight: 760 kg, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 760 kg, water tank capacity: 300 l, fuel tank capacity: 70 l, power: 13 kW (17.68 HP), temperature: 95 °C, volume flow: 0.9 m³/h, noise level: 104 dB, pressure (max.): 500 bar, Equipment: chassis, crane, This well-maintained DYNAJET 500th 15 HELI hot and cold water high-pressure unit is available for immediate delivery. Manufactured in 2019 and having only 196 operating hours, the machine is in excellent condition and is being delivered fully serviced, fully functional, and ready for operation. Designed for demanding industrial cleaning applications, the DYNAJET 500th 15 HELI combines powerful cleaning performance with compact dimensions, low weight, and excellent mobility. With an operating pressure of up to 500 bar and hot water temperatures up to 95°C, the machine is ideally suited for removing heavy contamination, coatings, grease, and industrial residues. The unit is equipped with a reliable Kubota diesel engine, integrated hot water system, and a large 300-litre water tank for independent operation even where external water supply is limited. The trailer-mounted design ensures maximum flexibility and easy transportation between jobsites. To ensure many years of reliable operation, the machine will be supplied with a brand-new 50 m high-pressure hose. A turbo nozzle and standard flat-jet nozzle are included in the sale. Key features and advantages: * Year of manufacture: 2019 * Only 196 operating hours Nlsdpez Nd Ndjfx Ag Ijh * Fully serviced before delivery * Fully functional and ready for operation * Maximum operating pressure: 500 bar * Flow rate: up to 15 l/min * Hot water temperature up to 95°C * Powerful Kubota 3-cylinder diesel engine * Integrated hot water system with high-performance burners * 300-litre integrated water tank * Approx. 70-litre fuel tank * Trailer-mounted unit with overrun brake * New 50 m high-pressure hose included * Turbo nozzle included * Standard nozzle included * Compact, robust and easy to transport *Ideal for industrial cleaning, surface preparation and professional service applications Please contact us if you are interested or would like to receive further information, pricing details, additional photos, or arrange a viewing of the machine. We will be pleased to assist you.

Condition: used, Year of construction: 2006, operating hours: 4,803 h, functionality: fully functional, machine/vehicle number: WPUD500H062000449, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,080 mm, pressure: 500 bar, type of input current: DC, empty load weight: 1,620 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32 kW (43.51 HP), DGUV certified until: 09/2026, Dynajet 500TH 30 L/min 500 bar 4800 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) New engine installed in September 2026, invoice available Imported to Sweden from Germany in 2021. Njdjz Egmcepfx Ag Iolh

Condition: used, Year of construction: 2015, operating hours: 5,201 h, functionality: fully functional, machine/vehicle number: W09HKF1011SHB8027, operating pressure: 550 bar, total length: 3,950 mm, high-pressure hose length: 50 mm, total height: 1,880 mm, total width: 1,870 mm, empty load weight: 1,200 kg, fuel: diesel, overall weight: 1,800 kg, water tank capacity: 500 l, noise level: 93 dB, DGUV certified until: 03/2027, Oertzen PT500 30 l/min Maximum pressure: 500 bar Njdpfx Agsz Ega Ns Ielh 5200 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) Owned by the same operator since new For cold water only; heating element has been removed.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Type: HPS 4022 Year of manufacture: 2015 Motor power: 22 kW Stroke length: 182 mm Nedpfxjzz Achj Ag Iolh Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar

Condition: ready for operation (used), functionality: fully functional, Description: A complete compression testing station, consisting of a 20T hydraulic press from RYS and a professional measuring system from AXIS, including a ZEMIC strain gauge. The equipment comes from a SHILOH production plant that is being decommissioned in Bielsko-Biała. It was used for force insertion tests, strength tests, and quality control. The set includes: RYS FR-5019 hydraulic press – 20T AXIS force meter – PEAK, PRINT functions, units in kg/N/lbs ZEMIC load cell (strain gauge) – range 2000 kg Blocks, fixtures, and tools as shown in the pictures Analog pressure gauge Hydraulics and hoses Table height adjustment on bolts Nledpfxoz Rvywe Ag Ioh Applications: Force insertion tests Laboratory testing Quality control and R&D Assembly and disassembly of components Design workshop / toolroom

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, pressure: 180 bar, empty load weight: 126 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 8/18-4C HOT-WATER PRESSURE WASHER Year of manufacture: 2023 The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. Nledpfxez Tqwpj Ag Ieh A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 800 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Flow rate [l/h]: 800 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 98–155 Connected load [kW]: 6 Cleaning agent tank [l]: 15 Hose length [m]: 10 Weight [kg]: 126 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components makes the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal piping.

Year of construction: 2024, condition: like new (used), functionality: fully functional, Stainless steel steam sterilization autoclave Pass-through autoclave, GXMQ-KK.13.8JS Model: STAU-26.3 Serial No.: G2310 Power: 11 kW Voltage: 380V/50Hz & 230V/50Hz Operating pressure: +0.5 bar / -0.88 bar Weight: 20,000 kg Self-dismantling and removal included. Nedsz Td Alepfx Ag Islh

Condition: good (used), DHI PPCH-G High Pressure Gas Controller/Calibrator 100MPa / 15,000psi With Carry Case Neds Ad D Nlopfx Ag Ijlh Pressure control to 100MPa (15,000 psi). AutoRange feature. One of two Q-RPT’s in each controller with 10:1 turndown. Supports external reference pressure transducers. FLASH memory for simple and free embedded software upgrades.

Condition: good (used), Year of construction: 2016, High-pressure cleaner, hot water high-pressure cleaner -Manufacturer: Ehrle, Hot water high-pressure cleaner -Type: HD 1140 Electronic II -Operating pressure: 30-230 bar Nljdjz Duf Rspfx Ag Ish -Spray flow rate: 16 l/min / Steam setting: 7 l/min -Hot water output: 30-98°C / Steam setting: 150°C -Power connection: 3/PE/AC/50Hz/400V -Cleaning agent: High-pressure jet application and quantity control -Dimensions: 1200/800/H1000 mm -Weight: 225 kg

Condition: used, functionality: unexamined, For sale: an industrial Nilfisk ALTO SOLAR BOOSTER 7-58E18H high-pressure washer with electric water heating, 18 kW. This stationary unit is designed for cleaning machines, equipment, floors, and industrial fixtures. Technical specifications according to the nameplate: Manufacturer: Nilfisk ALTO Model: SOLAR BOOSTER 7-58E18H Nsdpfxo Ad Nkbs Ag Ielh Product number: 107370270 Serial number: 3520122200419 Working pressure: 170 bar Maximum permissible pressure: 250 bar Flow rate: 18.5 l/min – 1110 l/h Maximum temperature (according to nameplate): 85°C Electric heating power: 18 kW Total rated power: 25.5 kW Power supply: 400 V, three-phase, 50 Hz Rated current: 39 A Protection rating: IPX5 Weight: 155 kg Country of manufacture: Hungary Equipment visible in the photos: High-pressure hose Nilfisk high-pressure gun Spray lance Pressure gauge Water temperature adjustment Control panel with START/STOP buttons and a main switch The unit has an additional marking on the housing: “MAXIMAL 70 Grad,” indicating a temperature limit of 70°C. The unit is used and shows visible signs of wear.

Condition: reconditioned (used), functionality: fully functional, pressure: 180 bar, empty load weight: 55 kg, KÄRCHER HD 9/18-4 CAGE COLD-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel spray lance, a steel-reinforced high-pressure hose, and a power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 900 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL DATA: Model: HD 9/18-4 CAGE Power supply (~/V/Hz): 3 / 400 / 50 Flow rate (l/h): 900 Inlet water temperature (°C): max 60 Operating pressure (bar): 180 Maximum pressure (bar): 250 Connected load (kW): 5.9 Weight (kg): 55 Dimensions (L x W x H) (mm): 625 x 500 x 360 ACCESSORIES: NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW 10m steel-reinforced high-pressure hose NEW power nozzle Water filter GEKA claw couplings – FREE OF CHARGE Nlsdpfx Ago Afwh Rs Ish KEY FEATURES: Open oil system – no operating time limits Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and simple to service Large wheels facilitate transport over uneven terrain

Condition: good (used), Well-maintained Falch Trail Jet 15 500 bar 490 operating hours Year of manufacture 2021 Hot water Nlodpfx Ageuvd N So Ieh Regularly serviced by Falch Various accessories available as options

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Serial No.: 21901006 Nledszvrmxopfx Ag Ish CE compliant, Laser Notice No. 50 (2007) Complete with case as pictured