Used Immuno Concepts Aft2000 for sale (475)

Condition: used, Year of construction: 2017, machine/vehicle number: IntNr231674, A high-quality, 3-axis precision machining center, the MIKRON MILL P 900 from GF Machining Solutions, built in 2017, is for sale. TECHNICAL DATA General Data Manufacturer: MIKRON / GF Machining Solutions Model: MILL P 900 Machine type: Vertical 3-axis precision machining center Year of manufacture: 2017 Number of axes: 3 Spindle operating hours: approx. 1,530 hours CNC control: FANUC 31i-B TECHNICAL DATA Travel X: 900 mm Travel Y: 600 mm Travel Z: 450 mm Gjdpfx Aksz Ipnnsyekc Rapid traverse X/Y/Z: 30 m/min Clamping area: approx. 1,000 × 600 mm Max. table load: 1,000 kg Max. spindle speed: 20,000 rpm Tool holder: HSK-A63 Spindle power: up to approx. 36 kW Torque: up to approx. 120 Nm Tool changer: 30-position Tool holder: HSK-A63 Machine concept: 3-axis gantry machining center The machine can be inspected on site by appointment. Subject to change, errors and prior sale!

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 2407001, functionality: fully functional, operating hours: 1,000 h, power: 4 kW (5.44 HP), filter area: 10.5 m², noise level: 75 dB, total height: 1,735 mm, total length: 1,580 mm, total width: 550 mm, overall weight: 182 kg, nominal flow rate: 460 m³/h, negative pressure: 240 Pa, The unit was designed and installed as a single-station extraction system for a workshop area. It has hardly been used in the past 10 years, as the workshop concept has changed. The system is currently powered and can be inspected. Dismantling and collection must be carried out independently. Upon purchase agreement, the electrical connections will be disconnected from the central control cabinet. All system and installation documentation is available. Gksdpsyf Az Tjfx Akysc

Condition: used, Year of construction: 2001, Demag ergotech concept 800/420-310 (2001) Gksdpfxoyyzqwj Akyec

Year of construction: 2009, operating hours: 1,629 h, condition: excellent (used), functionality: fully functional, Technical Description – Wintersteiger DSG Sonic Main Features: - Designed for thin-cutting of boards and panels in lamella/parquet production. - High-precision blade guidance without tolerances (no "play"), ensuring improved cutting accuracy. - Symmetrical saw frame construction provides uniform blade tensioning. Gkjdpfx Akex Avzyoyjc - Revolutionary drive concept with servo-controlled precision feed. - High stroke frequency of the saw frame: 550 strokes/minute. - Modular and ergonomic design: split construction for easy access and simple maintenance. DSG Sonic — Maximum element cutting height: - For 380 mm saw: cutting height 30–88 mm (or 45–88 mm, depending on configuration) - For 420 mm saw: cutting height 30–128 mm (or 45–128 mm) - For 500 mm saw: cutting height 80–210 mm (or 45–210 mm) - For 550 mm saw: cutting height 80–254 mm (or 45–254 mm) Machine specifications and requirements: - Machine weight (basic unit): approx. 3,000 kg - Dust extraction/exhaust: two connections required — Ø 120 mm and Ø 150 mm; extraction capacity: approx. 3,200 m³/h (air velocity ~ 30 m/s). - Compressed air pressure: minimum 6 bar; air consumption: approx. 200 l/min. - Lubrication: central lubrication system with guideway monitoring. - Machine year: 2009 - Operating hours: 1,629 - Condition: very well maintained.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,600 mm, overall weight: 14,000 kg, Veneer stack cutting machine / Veneer shears with 4 knives Manufacturer: Monguzzi (Fisher+Rückle) Type: AFV-42-3600 Year of manufacture: 2024 Hydraulic veneer shears with 4 knives for trimming and edging veneer stacks Typical applications: Veneer mill, veneer trade, veneer cutting, furniture and interior design with solid wood veneer Gjdsz I Tipepfx Akyskc Cutting range: Cutting length approx. 3600 mm 4 knives (2 upper and 2 lower knives), individually selectable Hydraulic pressure beam with 2 cylinders Hydraulic pressure switchable 45 bar / 90 bar Axes and drives: Positioning axes X and X2 (left / right) with stepper motor control Axis Y with frequency inverter 1.5 kW and brake Register adjustment with frequency inverter 0.75 kW and brake Register adjustment also via foot pedal Conveyor belt Line laser Hydraulics: Hydraulic unit with tank capacity 300 l Proportional valve Filter monitoring (contamination indicator) Control: PLC control with touch panel (esaware) Manual operation, automatic cutting, parameters, diagnostics, alarm history, programming Control panel with push buttons and emergency stop Safety: Emergency stop safety relay Pilz PNOZ X3 Light curtain with safety module Datalogic SE-SR2 Two-hand operation Electrical connection: 400 V, 50 Hz, 3P + PE Current consumption approx. 22 A Fuse 25 A Control voltage 24 V DC Basic concept: - Veneer stack cutting machine with 4 hydraulically operated knives - Pressure beam for fixing the veneer stack during cutting - NC positioning via the X, X2 and Y axes - Waste flaps for scrap - CE declaration of conformity according to Machinery Directive 2006/42/EC available, as well as documentation and circuit diagrams available Weight approx. 14,000 kg

Condition: good (used), Year of construction: 2004, Demag Concept 125/475-320 Clamping force: 125 tons Distance between tie bars: 475 x 475 mm Gjdpfexd Sz Eex Akyjkc 2 x core pullers on movable platten \+ Robot Demag W621-1831: X-550, Y-1000,Z-2000 (2004)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 10 m2 workspace, 4 m2 dressing area Gkjdpfx Aezgcy Djkyec 16 x Filter Fan Units Dimensions: Length: 6,000 mm Width: 3,000 mm Clear height: 3,600 mm (adjustable depending on ceiling and installation space) Area: 14 m² Brecon BCPS cassette system: Panel thickness: 70 mm Maximum wall height: 6 meters Standard panel width: 1,200 mm Aluminum frame profiles Finish: 0.6 mm coated steel or 3 mm HPL (RAL 9010) Flush-finished seams with cleanroom sealant. Ceiling Brecon BCPS system ceiling: Panel thickness: 50 mm Walkable ceiling option Load-bearing capacity up to 150 kg/m² Suitable for integration of: HEPA filter units (FFU) LED cleanroom lighting Air diffusers Utilities (data, electrical, gases) Chemically resistant ETP rubber Flat, cleanable design Optional with access control or interlock. Air handling Depending on desired classification: ISO 8 (production, assembly, packaging) ISO 7 (pharmaceutical, medical devices, precision engineering) GMP C/D possible, depending on the installation concept. Indicative bill of materials Component Specification Walls BCPS 70 mm panels Ceiling BCPS 50 mm system ceiling Doors 1–2 cleanroom doors Height 3,600 mm, adjustable in height

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Gkjdpfswl Rucsx Akyjc Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * accurate servo axis management The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Condition: good (used), DIASORIN Liaison Type 2229 Immunoassay Analyzer The LIAISON analyzer combines a flexible operating module with a broad assay menu and, due to its long walk-away time, results in high efficiency. The ability to perform up to 15 different assays simultaneously ensures efficient testing, even with a small number of samples. The LIAISON analyzer was developed for immunoassay tests and uses a “flash” chemiluminescence immunoassay (CLIA) technology with a paramagnetic microparticle solid phase (MP). The LIAISON analyzer is efficient from the outset and allows for the continuous loading of samples and reagents; the workload can be processed in direct access or batch mode. All test methods are based on an internal master curve with 2-point calibration. Autodilution, repeat, and reflex tests are performed on request by the operator and are carried out automatically by the system. The LIAISON system also has a STAT function to improve laboratory efficiency. Item condition: used Scope of delivery as shown in the picture Gkodpfx Asu D D N Nokyjc You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2017, Sieving machine- 2017 Mobile Concept Laser QM Powder With Siemens PLC Powder Handling Unit - Godpsz N H Atefx Akyskc

Condition: used, This listing is for a Thermo Scientific B·R·A·H·M·S Kryptor Gold Immunoanalyzer. The unit is in full working condition and is ready for immediate release. Revolutionize your laboratory testing with the Thermo Scientific B·R·A·H·M·S Kryptor Gold Immunoanalyzer. This fully automated, random-access bench top immunoanalyzer is engineered to enhance user autonomy, maximize throughput, and optimize cost efficiency, making it an essential tool for modern clinical laboratories. Key Features: High Throughput: Achieve up to 115 tests with an 80-sample capacity, ensuring rapid processing for high-demand environments. Nobel Prize-Winning TRACE Technology: Benefit from the TRACE (Time Resolved Amplified Cryptate Emission) technology, delivering fast and reliable results across a variety of essential medical indications. Comprehensive Immunoassay Menu: Access a broad range of homogeneous immunoassays for critical applications, including prenatal screening, oncology, endocrinology, infectiology, and acute care. Gedpfxjxx Af Ro Akyekc Benefits: The Kryptor Gold Immunoanalyzer significantly enhances laboratory productivity and workflow. With its fully automated operations, it minimizes manual handling, thereby reducing the likelihood of errors and improving overall efficiency. Laboratories can also enjoy cost savings through reduced reagent consumption and waste. Technical Specifications: Technology: TRACE (Time Resolved Amplified Cryptate Emission) Throughput: Up to 115 tests Sample Capacity: 80 samples Applications: Prenatal screening, oncology, endocrinology, infectiology, acute care

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2278358, type of input current: AC, total height: 2,500 mm, total width: 3,000 mm, total length: 1,200 mm, overall weight: 900 kg, For sale is a SCHUNK Sonosystems LS-C 9 kW ultrasonic welding system in very good condition. The system was used exclusively for development and laboratory purposes and was not used in series production. Accordingly, the machine is in very good technical and optical condition and is almost like new. The LS-C is a universal ultrasonic welding system for joining copper and aluminum conductors with contact parts, busbars, and flat contacts. Due to its flexible system concept, it is particularly suitable for development departments, technical labs, prototype manufacturing, and small series applications. Technical data Manufacturer: SCHUNK Sonosystems GmbH Model: LS-C laboratory system Ultrasonic generator: 9 kW Frequency: 20 kHz Voltage supply: 3 × 400 V, 50/60 Hz Compressed air requirement: 6.5 bar Welding range: flexible Al conductors approx. 25–160 mm² and Cu conductors approx. 25–120 mm² (application-dependent) Equipment Dynamic process control Monitoring of welding height, energy, and welding time PC-based user interface with Windows system Memory for over 10,000 applications and process data sets Network capability and data export Soundproof enclosure Force sensor Universal anvil Welding pressure cylinder combination Ø 80 mm and Ø 125 mm Complete vibration system for 95 mm² Cu conductors Gkodpszzaxasfx Akysc Cable clamps and stranded wire end stop CE-compliant design Also included in the scope of delivery Tool set for 50 mm² conductors Tool set for 70 mm² conductors Condition The machine was used exclusively in development and laboratory operations and was not subjected to continuous production loads. Accordingly, the operating hours are low and the system is in very good condition. Application areas Development and prototype construction E-mobility and battery technology Cable assembly Laboratory and technical lab use Pre-series and small series production Inspection and functional demonstration possible by arrangement. Technical documentation and further images are available upon request.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. Gksdpfx Aksz Agv Usysc - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. Gkedpfx Aez E Rbdekyjc High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Gsdpfx Aszz Rpcokyekc - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Godpfxsz Ag Rro Akyekc - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: Gkedsz Agw Eepfx Akysc - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: excellent (used), Concept Laser X Line 2000R BC2 Dual Laser Manufacturer: Concept Laser GmbH / GE Additive / Colibrium Additive Type: X Line 2000R BC2 Year of manufacture: 2015 Machine type: Metal 3D printing system Process: LaserCUSING® / Powder bed process Laser system: Dual Laser Material processed: AlSi10Mg For sale is an industrial metal 3D printing system from Concept Laser. The system was designed for the additive manufacturing of metallic components using the powder bed process and is suitable for research, development, prototyping, and industrial series production. BC2 upgrade / modernization The system has been upgraded to the newer BC2 system standard. According to the available documentation, a comprehensive retrofit was carried out, involving the replacement of numerous assemblies and components. As a result, the machine has a significantly modernized equipment and system standard compared to earlier X Line 2000R models. Technical data Build volume (X x Y x Z): 800 x 400 x 500 mm Mains connection: 3P/N/PE AC 400 V ±10 % Frequency: 50 / 60 Hz Max. current consumption: 17 A per phase Compressed air supply: 7 - 8 bar Inert gas supply: 5 bar Cooling: water-cooled system Machine dimensions approx.: 5,300 x 2,700 x 2,760 mm (L x W x H) Weight approx.: 13,400 kg Equipment Dual laser system Powder handling system Material conveying system Filter units Process gas supply Control cabinet technology Operating and control system Work platform with access ladder Water-cooled laser system Existing peripherals as shown in the pictures Documented service work 06/2026 Service performed by Colibrium Additive / GE Additive VarioScan system including associated E-box replaced Functional test performed No error messages documented after completion of the work Gkjdpozcn Efjfx Akyoc Operating data Laser 1 RET: approx. 26,808 h Laser 2 RET: approx. 38,419 h Note: The RET values describe the time during which the lasers were operational. They do not correspond to the actual exposure or production time. Application areas Additive manufacturing of metal components Aerospace industry Automotive industry Tool and mold making Research and development Prototype manufacturing Industrial series production Scope of delivery Concept Laser X Line 2000R BC2 main unit Powder handling components Filter technology Existing peripherals as shown in the pictures Further accessories according to the existing scope of delivery Condition Used Machine from industrial production Laser window clean and clear Optical condition as shown in the pictures Inspection possible by appointment Availability: upon agreement. Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: excellent (used), Year of construction: 2009, load capacity: 130 kg, arm reach: 3,200 mm, controller model: IRC5, The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. Based on the famous IRB 6600 series, with the flexible bending backwards concept, the very high wrist torque, the service friendly modular built up and the availability, significant for ABB’s robots, the IRB 6640 robot family goes even further. With focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Specifications Payload: 130 kg Arm Reach: 3200 mm Model Type: IRB6640 Controller: IRC5 Gedpfx Akowran Esyokc Model Year: 2009 Condition: TESTED & PAINTED Included: Manipulator + IRC5 Control Cabin + All Wire Sets + Teach Pendant We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: used, Year of construction: 2011, functionality: fully functional, turning length: 810 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, bar diameter (max.): 65 mm, We offer this used Mori Seiki NZ2000 CNC turning and milling center, manufactured in 2011. Fully automated twin-spindle production cell with FANUC robot, PROMOT Automation, and TOP XF380 bar feeder. Year of manufacture: 2011 For sale is a MORI SEIKI NZ2000 T2 CNC turning machine as a complete, automated production cell with PROMOT Automation, FANUC industrial robot, and TOP Automazioni XF380 bar feeder. This system is particularly notable for its exceptional automation concept, of which there are only two in Europe. The combination of main spindle, counter-spindle, two turrets, bar feeder, and robot automation allows different machining and material flow processes to be automated within a single system. The main spindle is supplied with bar material via the TOP Automazioni XF380 bar feeder. The bar capacity of the machine is 65 mm. Finished parts can be ejected on this side via the existing parts ejector. Simultaneously, the FANUC industrial robot with PROMOT Automation handles the automated workpiece handling on the counter-spindle side. The workpieces are placed on or removed from a rotary table with multiple workpiece holders. This enables highly productive simultaneous machining on the main and counter-spindle. The system thus combines practically two automated machining processes within a single production cell. Equipment / Highlights  MORI SEIKI NZ2000 T2  Year of manufacture 2011  Main and counter-spindle  2 turrets  Simultaneous machining capabilities  Driven tools  TOP Automazioni XF380 bar feeder, year of manufacture 2011  Bar capacity MORI SEIKI NZ2000 T2: 65 mm  Automatic material feed via bar material  Parts ejector on the main spindle side  PROMOT Automation robot cell, year of manufacture 2011  FANUC industrial robot  Automatic loading and unloading on the counter-spindle side  Rotary table / workpiece storage with multiple workpiece holders  Integrated safety device and protective enclosure  Fully integrated and coordinated production cell Technical data  Max. turning diameter: approx. 320 mm  Max. turning length: approx. 810 mm  Bar capacity MORI SEIKI NZ2000 T2: 65 mm  Spindle bore: approx. 73 mm  Max. spindle speed main and counter-spindle: up to 5,000 rpm  2 tool turrets  Driven tools  C-axis on main and counter-spindle  Design without Y-axis  Simultaneous machining on main and counter-spindle Gkedpfxsz A S Uys Akyec  TOP Automazioni XF380 bar feeder, year of manufacture 03/2011  Bar capacity of the entire system: up to 65 mm round material, limited by the particularity of the system. In contrast to a conventional NZ2000 T2, this is not simply a CNC turning machine with a robot added later. The system was designed as a complete, automated manufacturing cell. Bar machining and robot handling can be combined within the same machine. While one side performs machining of bar material via the main spindle, the counter-spindle side can be automatically loaded and unloaded via the FANUC robot. This concept enables high machine utilization and is particularly suitable for series production and low-manned or automated production operations. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Gkodpfxex A Hggj Akysc

Condition: good (used), 3D Systems ProJet MJP 2500 Plus MultiJet 3D Printer Description: Professional MultiJet 3D printer / MJP system 3D Systems ProJet MJP 2500 Plus Gkjdpfx Ajz Erdajkysc MultiJet Printing with HD and UHD printing mode For sale is a used professional 3D printer from the manufacturer 3D Systems. The ProJet MJP 2500 Plus is suitable for the production of precise plastic components, functional prototypes, concept models, as well as jigs and tool applications. Technical data: Manufacturer: 3D Systems Model: ProJet MJP 2500 Plus Technology: MultiJet Printing (MJP) Printing modes: HD / UHD Max. build volume: 294 × 211 × 144 mm HD mode: 800 × 900 × 790 DPI Layer thickness: 32 µm UHD mode: 1600 × 900 × 790 DPI Layer thickness: 32 µm Dimensions: 1120 × 740 × 1070 mm (W × D × H) Weight: 211 kg Power supply: 200–240 V / 50 Hz / 1-phase / 10 A Internal hard drive: at least 500 GB Operating temperature: 18–28 °C Interfaces: Ethernet USB Features: Integrated touch display Material system for build and support material Automatic material bottle switching Network connection USB port 3D Sprint software support Material containers as shown in the pictures Applications: Functional prototypes Concept models Form and fit testing Jigs and fixtures Tool applications Product development Additive manufacturing Scope of delivery: 1 × 3D Systems ProJet MJP 2500 Plus Material containers as shown in the pictures Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Shipping by freight forwarder possible. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 2003, Dry rack loading system for profiles Manufacturer: Makor Type: ACA Year of manufacture: 2003 Automatic rack loader at the end of the line for loading dry racks with painted profiles and strips Typical applications: Profile painting, strip production, coating lines for baseboards, decorative strips, and window strips Design: 4 positioning arms for short and long profiles up to approx. 5000 mm (arm spacing approx. 0 - 1600 - 2120 - 2550 mm) Paternoster rack width approx. 175 mm Gkjdpfx Ajz Nky Nekysc Basic concept: - Automatic transfer of the coated profiles from the end of the line to the dry racks - 4 positioning arms for different profile lengths - Can be used as the final stage of a profile coating line / board coating machine / strip spraying machine

Condition: excellent (used), Year of construction: 2019, • Model: Concept 350 – 3200 • Squaring length: 3200 mm • Blade diameter: 300–350 mm • Blade inner hole: 30 mm Gksdpsz Dp Dzofx Akyec • Blade projection (90°): 100 mm (75 mm) • Blade projection (45°): 67 mm (45 mm) • Blade group speed (inverter): 40 m/min • Main motor power: 7.5 hp (5.5 kW) • Extraction outlet: 120 / 100 mm • Extraction air volume: 1800 m³/h • Extraction air speed: 25 m/s • Operating pressure: 7 bar • Air consumption: 85 l/h Ask for live demo on WHATSAPP

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 4760025, MACHINE DESCRIPTION Special drive concept Multi-axis Profiroll CNC/AC control Two-slide design Graphical user interface Process visualization Data management Operator guidance Integrated workpiece handling The PRI 120 CNC/AC is a newly developed internal gear back-rolling machine for rolling back angles onto the tooth flanks of existing internal gears. The innovative machine concept is based on over 60 years of experience in the development and manufacture of thread, profile, and gear rolling machines in Bad Düben. The machine’s base frame is a ribbed, torsionally rigid machine bed made of cast iron, which minimizes vibrations. In particular, the use of state-of-the-art proportional valve technology in conjunction Gkedoznkz Sspfx Akyjc with the PROFIROLL CNC control enables optimal process control of the rolling process. The control system, in combination with the backlash-free roller guide system, guarantees the highest precision and repeatability in the positioning of the rolling slide and, thus, of the tool. The innovative handling system, in conjunction with the rolling process, allows for the shortest cycle times. TECHNICAL DATA / PARAMETERS Workpiece diameter min./max. (mm) = 60/120 Workpiece width, min./max. = 10/40 Tool mounting length (mm) = 50 Connection value (kW/A) = 16/63 Width (mm) = 3600 Depth (mm) = 3600 Height (mm) = 2680 Weight (kg) = 5700