Used Imas Imasbig for sale (684)

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Kedozuyplspfx Ahgsnb Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface Knsdpfx Aezuw Rtehgsb 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

Condition: used, Year of construction: 2019, operating hours: 82 h, empty load weight: 175 kg, Weight: 175 kg Year of construction: 2019 Operating hours: 82 Condition: Good condition Kodszzf A Dspfx Ahgjnb Price: € 900,- ex VAT

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total width: 450 mm, total length: 800 mm, total height: 1,800 mm, Used BIMAK 25TM industrial column drilling machine. A robust, floor-mounted drilling machine suitable for metalworking workshops, maintenance departments, production facilities, and general-purpose drilling operations. Technical information: – Manufacturer: BIMAK – Model: 25TM – Electrical connection: 400 V – Approximate dimensions: 800 × 450 × 1800 mm – Floor-mounted column design – Adjustable worktable – Solid cast-iron base IMPORTANT: The machine is supplied without a drill chuck. A suitable drill chuck and, if required, the corresponding arbor or adapter must be purchased separately. Used condition with normal signs of wear and tear. The actual condition and scope of delivery are shown in the photographs. The machine can be inspected by appointment. Loading assistance is available. Knedpfxjz Dvp Rj Ahgsb Location: Latvia Internal reference number: 48457-66 The price is stated excluding VAT.

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit Knsdpfx Ahszuyhnjgsb - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1996, - Double-sided IMA COMBIMA for longitudinal machining - Swiveling device - Double-sided IMA COMBIMA for transverse machining 1 used edge processing line IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Year of manufacture: 1996 Consisting of: - Double-sided IMA COMBIMA for longitudinal machining: Double edging unit 2 x milling units Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Cutting unit Flush trimming 2 x fine milling units Profile trimming blade Surface trimming blade Buffing unit Smoothing unit Knodpezuypxjfx Ahgob - Swiveling device from longitudinal to transverse - Double-sided IMA COMBIMA for transverse machining Protective milling Double edging Grooving milling unit Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Capping at the top pressure (retrofit to current model) Flush trimming Fine milling 2 x MFA milling units Grooving milling unit Profile trimming blade Surface trimming blade Copy buffing (4 motors) Buffing (2 motors) Smoothing unit Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, This 3-axis IMA BIMA 410 CNC Wood Machining Centre was manufactured in 2000. It features a working area of 3000 mm in X and 1200 mm in Y, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 410 machine we have for sale. Contact us for further details. • Working area X: 3000 mm • Working area Y: 1200 mm • Max. clamping height Z1: 100 mm • Max. workpiece thickness Z2: depending on equipment/application • Table height: approx. 1000 mm • Pendulum operation X: 2 × 1400 mm • Free space center X: 200 mm • Pendulum operation alternative X: 2 × 900 mm • Free space center alternative X: 1200 mm • Machine weight: approx. 6000 kg • Guide system: precision linear guides hardened approx. 62 HRC • Central lubrication: automatic for all main axes and ball screw • Drive system: AC servo motors with encoder • X/Y drive: rack and pinion • Z drive: ball screw • Feed rate: 40 m/min • Rapid traverse X/Y: 80 m/min • Rapid traverse Z: 25 m/min • Acceleration: 3 m/s² • Extraction connection main spindle: 300 mm • Extraction connection drilling spindles: 120 mm • Air speed: approx. 28 m/s • Air volume: approx. 7080 m³/h • Vacuum pump capacity: 100 m³/h • Compressed air connection: 1/2" • Air pressure: 6 bar • Control voltage: 24 V DC • Connected load: approx. 24 kVA • Power supply: 3/N/PE 400/230 V 50 Hz • Frequency converter: 0–480 Hz • Ambient temperature: +15 to +35 °C Kodpozug Afefx Ahgsnb • Control system: IMATRONIC NT 231 • Interpolation: linear all axes, circular 2.5D • Resolution: 0.001 mm • Spindle: HSK F63 • Tool clamping force: 11000 N • Max tool weight: 6 kg • Speed range: 1500–18000 rpm • Spindle power: 7.5 kW • Cooling: water cooled • CNC axis: 360° rotating • Tool magazine type: plate changer • Tool positions: 18 • Max tool length: 150 mm • Max tool diameter: 100 mm (150 mm with free сосед positions) • Max load: 60 kg • Saw unit motor: 1.5 kW • Saw speed: 5600 rpm • Saw blade diameter: max. 150 mm • Drilling unit: 14 spindles • Spindle stroke: 70 mm • Drive: 2.2 kW • Speed: 3150 rpm • Drill diameter max: 20 mm • Adapter head spindles: 4 • Speed max: 6000 rpm • Drill diameter max: 12 mm Table equipment: • 6 adjustable support arms • 12 suction cups 114 × 159 × 100 mm • 6 suction cups 125 × 75 × 100 mm • Vacuum system: 2-circuit clamping system • Electrical cabinet size: 2000 × 1800 × 600 mm DEFECT: • The main spindle no longer releases the interchangeable drill head

Condition: used, Year of construction: 2005, Edge banding machine Manufacturer: IMA Type: Advantage 600 Year of manufacture: 2005 Technical data - Joint milling - Gluing unit for thin and thick edges - Imprint zone - 2x edge trimmers - Flush trimming - Multi-function trimming unit (MFA) - Profile trimming blade - Surface trimming blade - Buffing Knsdpjzuyirjfx Ahgeb - Return system at the upper pressure roller Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar Kjdpozuykvofx Ahgsnb 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: excellent (used), Vötsch VC 4034 Climate Chamber / Temperature Chamber air-cooled Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Machine Type: Climate Chamber / Temperature Chamber Test Chamber Volume: approx. 335 liters For sale is a used Vötsch VC 4034 climate chamber from Vötsch Industrietechnik GmbH. This air-cooled temperature and climate chamber is suitable for professional temperature and climate tests, environmental simulations, material testing, and development and stress tests. With a temperature range of -40 °C to +180 °C and a humidity range of 10 to 98 % RH, the device offers optimal conditions for reproducible test sequences in research, development, quality assurance, and industry. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Test Chamber Volume: approx. 335 liters Test Chamber Dimensions: approx. 580 × 765 × 750 mm (W × D × H) External Dimensions: approx. 780 × 1,758 × 1,800 mm (W × D × H) Weight: approx. 515 kg net Temperature Range: -40 °C to +180 °C Temperature Change (Heating): approx. 3.2 K/min Temperature Change (Cooling): approx. 3.5 K/min Temperature Deviation: ±0.1 to ±0.5 K Temperature Homogeneity: ±0.5 to ±1.5 K Humidity Range: 10 to 98 % RH Temperature Deviation in Climate Operation: ±0.1 to ±0.3 K Temperature Homogeneity in Climate Operation: ±0.5 to ±1.0 K Refrigerant: R404A Refrigerant Quantity: approx. 2.5 kg Power Connection: 3/N/PE AC 400 V +10 % / 50 Hz Rated Power: 4.1 kW Rated Current: 12.5 A Equipment: Touch panel control Stainless steel test chamber Viewing window in the door Test chamber lighting Side access port Insert grid Air-cooled system Documentation / Operating manual Accessories as shown in the pictures Applications: Temperature tests Climate tests Environmental simulations Material tests Electronics tests Quality assurance Research and development Development and stress tests Condition: Used The climate chamber is in used condition. The optical condition corresponds to its age and can be seen in the pictures. Scope of Supply: Vötsch VC 4034 climate chamber Insert grid Control panel / controller Accessories as shown in the pictures Knodezng Unepfx Ahgob The table shown in the photos and any other items not explicitly mentioned are not part of the offer. Shipping by freight forwarder or self-collection possible by arrangement. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, number of slots in tool magazine: 5, total height: 3,100 mm, overall weight: 7,500 kg, table length: 4,000 mm, table width: 1,200 mm, spindle motor power: 7,500 W, spindle speed (max.): 18,000 rpm, This 3-axis IMA BIMA 610 V CNC Wood Machining Centre was manufactured in 1996. It features a working area of 4000 mm in the X-axis and 1200 mm in the Y-axis, with a maximum drilling diameter of 45 mm. The machine is equipped with 5 drilling spindles in the X direction and 11 in the Y direction. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 610 V machine we have for sale. Contact us for further details. • CNC Control: NUM CNC Control • Drive System: Siemens SIMODRIVE 611 • Maximum Workpiece Length: 4000 mm • Minimum Workpiece Length: 150 mm • Maximum Workpiece Width: 1650 mm • Minimum Workpiece Thickness: 10 mm • Maximum Workpiece Thickness: 65 mm • Drilling Spindles (X): 5 • Drilling Spindles (Y): 11 • Maximum Drilling Diameter: 45 mm • Main Spindle Power: 7.5 kW • Main Spindle Motor: Water-cooled • Tool Holder: HSK F63 DIN 69893 • Feed Drive Motor Power: 4 kW • Feed Speed: 1,500–18,000 mm/min • Maximum Tool Weight: 5 kg • Maximum Tool Clamping Force: 10,000 N • Operating Voltage: 400 V ±5% • Supply Voltage: 3/N/PE, 400 V, 50 Hz • Frequency: 50 Hz • Total Connected Load: 33 kVA • Rated Power: 41 kW • Rated Current: 62 A • Connection Cross Section: 16 mm² • Control Voltage: 24 V • Control Current: 52 A • Compressed Air Pressure: 6–10 bar • Air Connection: 1/2" • Required Air Consumption: 28 m³/h • Dust Extraction Connection: Ø100–300 mm • Air Flow Ø100: 14 m³/min • Air Flow Ø140: 28 m³/min • Air Flow Ø160: 36 m³/min • Air Flow Ø180: 46 m³/min • Air Flow Ø200: 56 m³/min Knodezug Alspfx Ahgsb • Air Flow Ø280: 105 m³/min • Air Flow Ø300: 127 m³/min • Number of Dust Extraction Ports: 1 • Machine Condition: Disassembled but fully functional Optional Equipment, not included: • Vacuum block suction cups (aluminum) and sliding console • Two milling spindles for synchronous milling with integrated tool changers • Safety fence with associated safety mats • Control cabinet and operating unit • Waste conveyor belt for milled sections

Year of construction: 1999, condition: good (used), IMA Compact MFA / F / 5212 edge banding machine Year of manufacture: 1999 Serial number: 06601 Max. edge banding thickness: 12 mm Min. workpiece thickness: 10 mm Max. thickness of edging material roll: 3 mm Feed speed: 12 m/min Adjustment of the joint guide rail: manual Heating time: 10 min Jointing unit: Yes, with 2 milling units Automatic edging roll magazine: Yes Trimming shears up to: 0.2 - 3.0 mm Solid edge magazine: Yes Preheating of the panel by heating radiator Knedpfx Ahjia Naqsgsb Automatic glue application with glue tank and granulate Cutting saw angle adjustment via program Multi-function unit Rounding unit/corner copying, 2 motors Profile trimming blade Flat trimming blade Buffing unit Unit display, mechanical digital display Control type via control panel Operation: selector switch/push buttons Protective hood Weight approx. 2500 kg Dimensions L x W x H: 6500 x 1000 x 1600 mm CE marked Technical specifications subject to change

Condition: used, Technical specifications: Max. planing width: 230 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 4 Spindle arrangement: bottom 5.5 kW right + left 11 kW top 7.5 kW Ksdpszza Ibefx Ahgjnb Number of steel feed rollers: 4 Number of rubber feed rollers: 1 Diameter of extraction nozzle: 120/140 mm Infinitely variable feed speed adjustment: 6-22 m/min Feed via cardan shafts Lubrication pump for the work table 1 smooth roller in the table Pressure: 6 atm Power supply: 400 V Overall dimensions: Length: 3300 mm Width: 1460 mm Height: 1850 mm

Condition: used, functionality: fully functional, Reportedly very little used IMA model TR 135 medium speed blister packaging machine. - Manufacturer: IMA - Model: TR 135 - Forming capacity: max 90 cycles/min - Cutting capacity: max 230 cycles/min - Control system: Color touch screen - Feeding system: Pre-feeder hopper with capacity 45 litre + bowl with vibrator - Power supply: 400 V, 50 Hz (max power 12 kW, average power 7 kW) - Air supply: 700 Nl/min, 6 - 8.5 bar - Cooling device: Chiller Euro cold ACW-LP 16T Kodpfx Aey Slchohgsnb Blisters: - Blister: PVC/ALU blisters. - Size range: Width 30 - 88 mm x Lenght 60 - 135 mm x Thickness 3 - 12 mm - Available parts: Possible to supply with IMA A83 horizontal cartoning machine

Condition: used, Year of construction: 2006, total width: 3,580 mm, total height: 1,840 mm, Colour: Grey Empty weight: 3.500 kg Dimensions (LxBxH): 180 x 358 x 184 cm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 106992 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 30 - - Max. planing block diameter [mm]: 130 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Tool present: Yes Kjdpfx Ahjzguqzegenb - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Tool present: Yes - Max. planing width [mm]: 240 - Max. planing height [mm]: 130 - Feed table length [mm]: 1780 - Feed roller diameter [mm]: 130 - Feed motor [kW]: 3 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Max. feed speed [m/min]: 4 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 88 - Fuse [A]: 100 - Power [kW]: 41.0 - Transport dimensions: 1800mm x 3580mm x 1840mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Kedpfow El Nhox Ahgjnb

Condition: excellent (used), total height: 1,300 mm, Description: HOMAG CNC machining centers IMA CNC machining centers Kjdpfezhn Rwox Ahgjnb

Condition: used, functionality: unexamined, Ferwood Code: RU0011433 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service, please contact us. 65KG 120X80X60 Kjdpjylaibefx Ahgsnb

Condition: used, Year of construction: 2006, total width: 4,210 mm, total height: 1,830 mm, Colour: Blue Empty weight: 3.500 kg Dimensions (LxBxH): 190 x 421 x 183 cm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107707 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 4: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 5: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 6: - - Spindle type: Horizontal spindle - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - Max. planing width [mm]: 230 - Max. planing height [mm]: 120 - Feed table length [mm]: 1800 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 4 - System/software: Memory System - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 130 - Options: Automatic feeding system - Feed speed: Automatic - └ Min. feed speed [m/min]: 4 - └ Max. feed speed [m/min]: 30 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 78 - Fuse [A]: 80 - Power [kW]: 36.0 - Transport dimensions: 1900mm x 4210mm x 1830mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Ksdpfxezl Tvae Ahgsnb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS: - Min. workpiece length: 400 mm - Max. length: 6000 mm - Max. workpiece width: 200 mm - Max. workpiece thickness: 200 mm - Roller motor power: 0.75 kW - Chain motor power: 1.1 kW - Feed rate adjustable via geared motor - Roller speed: 19 - 118 m/min - Belt speed: 10 - 60 m/min Knjdpfjxfgpgjx Ahgeb - 8 guiding belts - 17 steel feed rollers - Roller diameter: 80 mm - Roller height from base: 900 mm - Pneumatic pressing - Dimensions (L/W/H): 565 / 175 / 120 cm - Weight: ~ 1500 kg

Condition: excellent (used), Briquette press WEIMAR Galant C150 - used PLC control, Level monitoring, Conveyor screw for the pre-compactor, suitable for under-mounting ----- Technical data ----- Motor power: 5.5 kW, Briquette shape: round, Briquette diameter: 50 mm, Kjdpfxszy Nxyj Ahgenb Briquetting capacity: 30-50 kg/h, Operating hours: 398.59 hours, Dimensions (L x W x H): 2,030 x 1,315 x 1,185 mm, Weight: 500 kg Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Hydraulics checked - Ready for immediate use

Condition: used, Year of construction: 2016, Vertical CNC drilling and machining center Manufacturer: Weeke Type: Optimat BHX Year of manufacture: 2016 Technical data Knedpfx Ahjzy N E Hjgeb - Working area X: max. 3,050 mm - Working area Y: 70,850 mm - Workpiece thickness Z: 12,60 mm - Workpiece weight: max. approx. 35 kg - Number of axes: 3 - Milling spindle: 5 kW - Milling spindle speed: max. 18,000 rpm - Tool holder: HSK-F63 or ETP 25, depending on the version - Tool change: automatic tool magazine - Tool positions: 4 - Vertical drilling spindles: 13 - Horizontal drilling spindles X: 4 - Horizontal drilling spindles Y: 2 - Drilling unit: V13 High Speed - Drilling unit power: 2.3 kW - Drilling speed: 1,500 - 7,500 rpm - Max. drilling depth: approx. 38 mm - Drilling diameter: max. approx. 35 mm - Spindle spacing: 32 mm - Dado saw: in X-direction - Dado saw blade: approx. 100 mm - Workpiece transport: throughfeed system / transport chain - Workpiece clamping: collet gripper, vacuum-free clamping system - Control system: HOMAG powerControl / powerTouch - Software: HOMAG woodWOP - Total connected load: approx. 11.5 kW - Dust extraction connection: approx. 160 mm - Dust extraction air requirement: approx. 2170 m³/h - Weight: approx. 1500 kg - CE Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2010, RAIMANN Econorip 310 multi-saw - German production - CE marking - Quickfix disc sliding system - year of production 2010 TECHNICAL PARAMETERS: - cutting height 110 mm - cutting width 340 mm - engine power 22 kW - adjustable feed on the inverter - electric shaft height adjustment - electric adjustment of the pressure height - spindle in the Quickfix system (the possibility of changing the dimensions without the need for tools) - track diameter max 350 mm - spindle diameter 65 mm - sleeve diameter 80 mm - four upper pressure rollers - four rows of anti-jet pawls - boot for short elements - max width of the element 700mm Kodeh Tm Aljpfx Ahgjnb - minimum element length 300 mm - central lubrication - diameter of the stub pipe 250 mm - ruler Machine dimensions: 190x185x165 cm weight 1800 kg

Condition: ready for operation (used), Year of construction: 2004, Double sided edgebander manufactured in 2004. This HOMAG OPTIMAT KFR 526/10/A3/35 features a robust design suitable for various applications. It operates at a voltage of 400 V and has a load capacity of 250 A. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG OPTIMAT KFR 526/10/A3/35 machine we have for sale. Contact us for further details. Kedpfx Aez Ah Ixjhgsnb - Voltage: 400 V- Frequency: 50 Hz- Phase: 3~+N- Control Voltage: 24 V- Nominal Current: 190 A - Main Fuse: 250 A

Condition: good (used), Year of construction: 2008, functionality: unexamined, - unverified Kedpfxoy S Twtj Ahgsnb