Used Hotbox Hb-1600 for sale (3,431)

Condition: ready for operation (used), Maximum material height: 80 mm Table dimensions: 2000 x 1000 mm Arm clearance: 1600 mm Lasdpfx Afewma Hkotod Motor power: 0.75 kW

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: Rod20x10RES, ABUS ZHB overhead crane runway, approx. 20x10m Load capacity / lifting capacity: 1000 kg (1 ton) Lodpfxsxr S Dcs Aftoad Technical data: Runway made of ABUS HB250 rails The system is delivered complete: ABUS HB rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Including Abus GM electric chain hoist, travel drives, and pendant control Lifting height approx. 3.5 m The crane is dismantled and available immediately Rail color is affected by oil mist Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarding or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: good (used), 147 USED Internal Flour Silos - Stainless Steel. EXTERNAL DIMENSIONS (in cm): - height 200, - width 200, - length 200. INTERNAL DIMENSIONS (in cm): - height 150, - width 192, - length 190. EQUIPMENT: - 2 stainless steel silos with a capacity of 3 tons each, - scale, hopper, - flour dosing computer. IMPORTANT: The silos' capacity can be increased to approximately 6-7 tons each. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Lasdpfx Afexdkx Netod

Year of construction: 2010, condition: used, HB THERM 140 Z 2 (2010) 16KW Measurement range 0–400 °C Ljdpfev H Ad Hsx Aftoad Resolution 0.1 °C Regulation accuracy ±0.1 K Tolerance ±0.8 K Flow measurement Measuring range 0.4–40 l/min Resolution 0.1 l/min Regulation accuracy ±0.1 l/min Tolerance ±(5% of measured value + 0.1 L/min) Pressure measurement Value Unit Measuring range 0–20 bar Resolution 0.1 bar Tolerance ±5% of final value Technical data O8360-CS 2023-08 25 3.2 Emission value unit Permanent sound pressure level 55 °C 3.3 Operating conditions Temperature range 5–40 °C Relative humidity* 35–85 % RH Minimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm

Condition: good (used), Year of construction: 2009, operating hours: 4,500 h, I have 5 Kaeser HB 950 blowers for sale with 110 kW and 132 kW motors. Laedpsv Rmkxefx Aftjd

Condition: ready for operation (used), Year of construction: 1999, Peripheral devices HB-THERM TYPE: HB-CW 90 Laedpfowuvh Hex Aftsd 4 units Year of manufacture: 1998-1999

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: Rod15x10RES, ABUS ZHB Overhead Crane System, Crane Runway approx. 15x10m Load Capacity / Lifting Capacity: 500 KG - 0.5t Technical Data of the System: Lsdpfx Afexr S Hdetoad Crane runway made of ABUS HB250 rails System is supplied complete: ABUS HB rails, rail connectors, trolleys, end plates, cable trolley system, brackets/hangers, etc. Including Abus GM chain hoist from year 2024!!! Lifting height approx. 3.5m The system can also be extended; 20 - 25 - 30m or more is possible! Crane is dismantled and available immediately Rail color is affected by oil mist Used condition, see pictures Item location is 75053 Gondelsheim Shipping by freight carrier or collection is only possible by appointment Demag KBK1, KBK2, and KBK3 rails are stock items!

Year of construction: 2001, condition: good (used), HB Therm 140 U1 Series 4 Water, 140°C 9 KW year: 2001-2005 overhold ! price: 1.650 € contact: Mr. Rainer Eckerle Ljdpfxswl Ingo Aftoad

Condition: good (used), Year of construction: 2017, heating cooling device HB Therm 100 Z1 Serie 5 Wasser, 100°C 9 KW new Service ! (art.3179) year: 2017-2018 price: 3.250 € Lajdowhygyspfx Afted contact: Mr. Rainer Eckerle

Year of construction: 2017, condition: good (used), heating cooling device HB Therm 140 Z1 Serie 5 Water, 160°C 9 KW + new Service ! year: 2017-2018 price: 4.950 € contact: Mr. Rainer Eckerle Lajdpfxokn Enuj Aftjd

Year of construction: 2017, condition: good (used), heating cooling device HB Therm 140 Z1 Serie 5 Water, 140°C 9 KW + new Service ! year: 2017-2018 price: 4.650 € contact: Mr. Rainer Eckerle Ljdpfjkn Elnsx Aftead

Year of construction: 2018, condition: good (used), heating cooling device HB Therm 160 Z2 Serie 5 Water, 160°C 17 KW Laedpfx Afok Tapwstjd year: 2017-2018 price: 5.950 € contact: Mr. Rainer Eckerle

Year of construction: 2018, condition: good (used), heating cooling device180 Z2 Serie 5 Water, 180°C 17 KW New Service ! price: 7.950 € contact: Mr. Rainer Eckerle Lsdpfx Afsk Tap Tetjad

Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. Lodpfxstmrkrs Aftead -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 1,620 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 1,050 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, total height: 4,073 mm, total width: 4,758 mm, table load: 4,000 kg, overall weight: 32,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 54,000 W, number of slots in tool magazine: 60, tool weight: 20,000 g, product length (max.): 5,301 mm, number of axes: 5, This 5-axis EUMACH UMC-1600 was manufactured in 2020. It features an impressive X-axis travel of 1,620 mm, Y-axis travel of 1,260 mm, and Z-axis travel of 1,050 mm. The machine includes a robust table diameter of 1,320 mm and a maximum table load of 4,000 kg. If you are looking to get high-quality machining capabilities, consider the EUMACH UMC-1600 vertical machining centre we have for sale. Contact us for further details. • CE certification: YesTravels and feeds • B-axis swivel range: +10° to −190° • C-axis rotation: 360° • Rapid traverse X/Y/Z: 24 / 24 / 24 m/min • Cutting feed X/Y/Z: 20 / 20 / 20 m/minRotary table (C-axis) • Table diameter: Ø1,320 mm • Max table speed: 30 rpm • Minimum indexing increment: 0.001° • Drive: Direct-drive torque motor • T-slots: 13 slots, size 18H, pitch 100 mm • Table height from floor: 1,085 mmSwivel head (B-axis) • Drive: Direct-drive torque motor • Swivel time vertical ↔ horizontal: 3 s • Swivel range: +10° / −190°Spindle • Power S1/S6: 37.4 / 54 kW • Torque S1/S6: 170 / 390 Nm • Front spindle bearing diameter: 100 mm • Spindle centre to column: 1,105 mm • Spindle taper: Pending confirmation (documentation lists HSK-A100, BT, CAT, SK50 as possible)Working distances • Vertical spindle nose to table surface: 150–1,200 mm • Horizontal spindle centre to table surface: 100–1,150 mm Laedoznl E Eepfx Aftsd • Vertical spindle nose to table centre: −300 to 960 mm • Horizontal spindle centre to table centre: −250 to 1,010 mmAutomatic tool changer • Type: Cam-arm • Max tool diameter: Ø150 mm • Max tool length: 350 mm • Tool exchange position: HorizontalGuideways and ball screws • Linear guide size X/Y/Z: 55 / 55 / 55 mm • Number of guide rails X/Y/Z: 4 / 2 / 2 • Number of guide blocks X/Y/Z: 8 / 4 / 6 • Ball screw diameter X/Y/Z: Ø55 / Ø55 / Ø63 mm • Ball screw pitch X/Y/Z: 16 / 12 / 12 mmElectrical data • Voltage: 400 V • Frequency: 50/60 Hz • Connected load: 80 kVAOutline drawing confirms installation dimensionsIntegrated features/options • Simultaneous 5-axis machining • Direct-drive B-axis swivel head • Direct-drive C-axis rotary table • HEIDENHAIN iTNC 530 HSCI control with RS-232 interface • Linear scales on X, Y, Z axes • Rotary encoders on B and C axesPending confirmation (machine info) • Exact spindle taper • Operating hours • Spindle hours • Confirmation that the 60-tool magazine and all listed equipment are installed on this specific machine Additional equipment • Chain-type chip conveyor • Two screw-type chip augers • Full splash guard with roof (enclosure) • Programmable coolant system • Spindle air blast • Spindle water cooler (chiller) • Work light • Machine status light • Machine and control manuals • Toolbox • Approx. 40 HSK-100 tool holders included with the machine.Pending confirmation (accessories) • Coolant through spindle (CTS) • Touch probe (workpiece probing) • Tool measurement system (tool setter) • Complete list of included tool holders and accessories

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M01.16.21.51.02, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,600 mm Travel range Y-axis: 1,200 mm Lodpfeznkpvjx Aftjad Travel range Z-axis: 500 mm Travel range W-axis: 1,200 mm Travel range B-axis: 360° Spindle speed: 10,000 rpm Spindle motor power: 30 kW Feed drive: Brushless AC servo motors Feed rate: 0–20,000 mm/min Rapid traverse X-axis: 20,000 mm/min Rapid traverse Y and Z axes: 20,000 mm/min Manual mode: 20,000 mm/min Setup operation: 0–2,000 mm/min Table size: 1,500 × 1,500 mm T-slots: 5 × DIN 650-22 H12 T-slot spacing: 150 mm MACHINE DETAILS Tool clamping: Hydraulic Electrical connection: 400 V Frequency: 50 Hz Compressed air operating pressure: 6 bar Nominal flow rate: 7,000 rpm

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on time: 12,577 hours Lodpoznir Aefx Aftjad Laser on time: 72,745 hours Includes Sheetmaster.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, The machine can be inspected with a lead time of three days. TECHNICAL DETAILS Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 300 mm Lsdsznb Ntopfx Aftoad Spindle bore diameter: approx. 52 mm Maximum main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Control system: FANUC CNC Machine weight: approx. 2,200 kg EQUIPMENT Powerful main spindle Robust machine construction for high dimensional accuracy Tool turret with fast indexing Compact design with a small footprint User-friendly CNC control system High reliability Low maintenance requirements Complete technical documentation

Condition: used, Year of construction: 2007, Technical details: faceplate diameter: 1600 mm power requirement: 80 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm max. diameter of face turning: 1800 mm tool taper: ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis Laedpfx Afjx Aq E Hetod *

Condition: good (used), Year of construction: 2001, functionality: fully functional, KAMPWERTH SHD 1600 Horizontal Press, including 3 exchange containers 48000x2800x3000 The device only compresses material into the containers. It is not a baling press. Paper press // Waste press // Garbage press Lasdpfsxm Skrox Afted Press, 1 unit • Type: Kampwerth SHD 1600 • Year of manufacture: 2001 • Empty weight: 3500 kg • 15 kW • Dimensions: 5000x2300x3700 mm (disassembled for transport) Container box for baling press, 3 units • Year of manufacture: 2001 • Volume: 28 m³ • Empty weight: 3,100 kg • Filling weight: 12,000 kg • Dimensions: 7000x2400 mm Location: Bielefeld

Condition: excellent (used), Year of construction: 2008, Siemens Sinumerik 840 D, 5 axes controlled. Wheel diameter max 2000 mm 700 mm wheel width Lasdpfxeza Egbe Aftsd Machine weight 35,000 kg Space requirements approx. 6.9 x 8.4 x 3.7 m

Condition: used, Year of construction: 2014, operating hours: 3,600 h, functionality: unexamined, Agie Charmilles / Mikron VCE 1600 Pro CNC machining center Laodpfx Afozmh Nqjtsd Manufacturer: Type: VCE 1600 Pro Year of manufacture: 2014 Operating hours: see photos Further information available upon request.

Condition: used, Year of construction: 2010, (1) Injection molding machine, Handling: Wittmann | W832-0185 | 2010 Lajdpfxoy N R Tyj Aftod Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling System 1x Conveyor Belt 1x Hopper Dryer, company TORO-systems 1x external Hot Runner Unit, company Mold Masters 1x Conveyor Unit, company Motan

Condition: used, mileage: 491,328 km, power: 320 kW (435.08 HP), first registration: 03/2017, fuel type: diesel, empty load weight: 9,400 kg, maximum load weight: 6,600 kg, overall weight: 40,000 kg, tire size: 315 / 80 R 22.5 / 15mm, axle configuration: 4x2, wheelbase: 5,000 mm, next inspection (TÜV): 01/2025, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total length: 9,500 mm, total width: 25,500 mm, total height: 38,000 mm, front tire size: 315 / 80 R 22.5 / 15mm, operation weight: 16,000 kg, Equipment: air conditioning,

Condition: ready for operation (used), Year of construction: 2008, grinding length: 1,600 mm, grinding width: 630 mm, Surface grinder 1600 x 630 M7163x16100, magnetic table size 1600 x 630, machine length 5400mm, depth 2500mm, height 2600mm. Automatic feeds in the X and Y axes. We are the first owners; the machine is used on average for a few hours a month for service-related grinding. Year of manufacture: 2008. Power: 22KW, 60A. Shipping costs are borne by the buyer. We can arrange complete container shipping, including packing and loading. Here are two packing options: Option 1 Packing on a pallet + aluminum foil and moisture absorbers Requires a 40' HC container. This is the recommended option, as the vacuum foil and absorbers create a protective barrier against moisture and salt. Cost, including loading and securing the machine in the container: 1800 EUR (net). Option 2 Packing without a pallet, aluminum foil, or absorbers. Loading only into a 40' OT container. Cost: 850 EUR (net). Lajdey Shzaepfx Aftjd Note: In this case, the machine will be more exposed to moisture and salt. Example cost of TRANSPORT ORGANIZATION SERVICE – freight forwarding (all-in), loading Częstochowa, PL, unloading 121001 India, IN, 40 HC, port-to-port, approximately 40 days: 5,050.00 USD.