Used Hapfo Special Edge Sander for sale (13,383)

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; The machine is supplied with an assortment of sanding belts; A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. Itedpfswgc D Sox Am Hsl - Swivels 90-180° - Motorized belt oscillation - Small support table on the idler pulley - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibrating and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finishing sander Ideal sanding machine for interior design companies, also suitable for intermediate sanding of lacquered surfaces. Edge banding machine with combination unit and electronic articulated pressure bar, edge segments can be switched on and off. Segment width of the pressure bar: 35 mm Contact roller can be pneumatically adjusted, low wear due to ribbed steel roller Grain size compensation Drive motor 7.5 kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed speed can be steplessly adjusted via frequency inverter from 2.5 - 13 m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the discharge end Constant working height of 900 mm by adjusting the upper part of the machine, thus can also be integrated into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm Workpiece height approx. 3 to 150 mm Common sanding belt dimension: 1360 x 1900 mm 3 rubberized pressure rollers Infeed roller table and foldable discharge table Preparation for vacuum blower. The carpet is perforated and connectors for an optional blower are available. Alternatively, the carpet can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm, and 2 x 100 mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar setting points at the front and rear, as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibrating roller. CE marking Operating manual Without the illustrated connection cable Isdpfx Amszqvmrs Hotl Original paint, only retouched in some areas Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this provider".

Condition: excellent (used), Year of construction: 2024, For sale is a used Holzprofi edge sanding machine, model KS 2260, with a sanding belt length of 2260 mm. The machine is in very good condition and has been inspected by our qualified technicians. Technical specifications: - Table size 750 x 250 mm - Sanding belt length 2260 x 150 mm - With oscillation - Dust extraction port Ø 100 mm - Motor power 2.2 kW / 3 HP - Year of manufacture 2024 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: sanding machine, edge sanding machine, edges, KSM, KSM 260 Itodpfx Aoz Ay H Hom Hjl Reference: R-L07JU

Condition: used, This listing is for Edge Systems S.A.F.E System Surgical Smoke Evacuator The unit is in full working condition and ready for immediate use Itsdpfx Amezqf N Ne Hel This surgical smoke evacuator is a high-quality lab instrument manufactured by Edge Systems (Model: S.A.F.E System). Efficiently captures and filters airborne particulates and hazardous smoke plumes, enhancing the safety of the operating or clinical environment. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 2,200 mm, overall weight: 2,000 kg, input voltage: 380 V, grinding belt width: 80 mm, input frequency: 50 Hz, Direction of machining: from left to right. Two belt sanding units with a traversing sanding pad (option to use profiled pads). Sanding units mounted on a cross column, with adjustable height, left/right positioning, and angle adjustment. Ijdpfozz Rh Ssx Am Hetl Electronic system for adjusting the advance and retraction of the sanding pad, synchronized with the feed rate (changing the feed rate automatically adjusts the advance/retraction times of the pads). Adjustment of the pad pressure. Adjustment of the sanding belt tension. Oscillation of the sanding belt. Two sanding belt speeds. Max. sanding belt width: 80 mm. Feed rate is continuously adjustable using a variator. Pressure bar with pressure rollers (new pressure rollers). Additional lateral pressure.

Condition: used, Year of construction: 2012, operating hours: 2,815 h, functionality: fully functional, machine/vehicle number: 12SLT146060, overall weight: 21,000 kg, Equipment: steel tracks, Tracked diesel 2 shaft shredder in perfect working condition. Dimensions: Weight: 20 Tonne (22UST) Transport Width: 2.5m (8'3") Transport Length: 10.2m (33'6") Transport Height: 3.1m (10'5") Working Width: 2.5m (8'3") Working Length: 10.2m (33'6") Itedpfxoya Hmis Am Hjl Working Height: 4.2m (13'10") Applications All types of wood (railway sleepers, pallets) All plastics (including wind turbine blades) Commercial and industrial waste Construction & Demolition (C&D) Domestic and household waste Green waste (including grass, trees, stumps) Mattresses Paper and cardboard (including paper rolls) White household goods

Condition: used, Year of construction: 1994, Belt height: 150 mm Itsdpfxszd Hngs Am Hsl Belt length: 2280 to 2290 mm Belt speed: 22 m/s Two-sided sanding with oscillation Drive mechanism Veneer sanding mechanism End-face sanding / radius sanding with a small support table Surface sanding with a tilting table Belt direction: right/left Location: Nattheim

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Itjdpfxov Aailo Am Hol

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm Iedpfezk Nmrsx Am Hetl - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Second-hand machine Year of manufacture: 1988 Condition: well-maintained Itedpfx Amozk Ny Ej Hjl Features and technical specifications: - Length of work tables: 1440 mm - Total width of the two work tables: 710 mm - Tilt adjustment of the work tables: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10–20 m/sec - Vertical adjustment of the oscillating unit: 125 mm - Air consumption: 25 NL/min - Electrical specifications: 400 V / 2.9 kW Weight: 490 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness Isdpfx Asugpwnem Hetl 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, Year of construction: 1996, functionality: fully functional, Felder FS900K edge sander Sanding belt width: 150 mm Tilting worktable at an angle of 45 degrees Sanding belt oscillation Motor power: 3 kW Year of manufacture: 1996 Itsdpozxw Efofx Am Hjl Machine dimensions: 147x61x121cm (H)

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! Isdpoxqggcsfx Am Hotl • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: new, Year of construction: 2022, Motor 2.2 kW (3 hp), Sanding belt 2280 x 150 mm, Swiveling edge sanding unit, Motorized belt oscillation, Support table at the idler pulley, Pneumatic belt tensioning, Table size 700 x 350 mm, Working surface 1000 x 150 mm, Belt speed 22 m/s, Roller diameter 140 / 80 mm, Dust extraction port D = 100 mm Ex works, from stock in Seevetal, subject to prior sale. Itsdpfxeffyc No Am Hsl

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Itsdpfxjudxche Am Hol Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit Isdpshy Tlrefx Am Hjtl - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Used Machine Features and Technical Specifications: - With left-side support table - With built-in dust extraction system - With work table 750 x 300 mm - Motor: 2.2 kW - Belt speed: 22 m/s - Sanding belt length: 2280 mm - Sanding belt width: 150 mm - Footprint: 1400 x 770 mm - Weight: approx. 255 kg Itsdpfx Amezyy A Ae Hel

Condition: used, A very rare Hapfo Type AP-9000-M hydraulic automatic wood-copying milling and turning machine for turning round profiles such as balusters, table legs and lamp parts using a copying turning tool, as well as milling profiles using a milling unit and fluting curved workpieces. Sample image! Illustration similar. Technical data: - Centre-to-centre distance: 330 mm - Max. workpiece diameter: 450 mm - Centre-to-centre distance: 4,100 mm Itodpfx Amszzkf Ro Hol - Power consumption: 7.6 kW - L x W x H: 5,800 x 1,100 x 1,500 mm - Weight: ~ 2,000 kg

Condition: used, Second-hand HAPFO AP 5000/ME copy lathe for professional use in woodworking. The machine is designed for copy turning of workpieces and is suitable for typical turning and shaping work on wood. Technical data: - Centre-to-centre distance: 1,300 mm - Centre height: 250 mm - Motor: 1.4 kW Isdpfszrx Saex Am Hetl

Condition: good (used), Year of construction: 1987, Max. cutting length: 5.2 m Max. cutting width: 0.6 m Max. cutting height: 140 mm Ready for immediate use. Itjdpfxez Dnppj Am Hsl The blades will be replaced with new ones.

Condition: good (used), Year of construction: 1981, Ural 375D | 6x6 | Off-road drive | Military vehicle. For sale the legendary Ural 375D - a reliable 6x6 military truck, designed to work in the most difficult off-road conditions. - Imported from Germany, complete set of documents. Itodewrwu Nepfx Am Hel - New Tarpaulin. • Engine: V8 petrol ZIL-375 (7.0L) • Power: approx. 180 HP • Drive: 6x6 (with the possibility of disconnecting the axles) • Gearbox: manual 5-speed • Off-road tires in good condition • Central wheel inflation system • Cargo box with tarpaulin Starts without a problem, ideal for collecting purposes, off-road expeditions, military shows or as a base for reconstruction (e.g. expedition camper).

Condition: excellent (used), Year of construction: 2021, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 220247, total length: 18,000 mm, total width: 4,000 mm, total height: 3,000 mm, input frequency: 50 Hz, input voltage: 400 V, pressure: 7 bar, The HE 500 is a double-edging line – L-shaped – consisting of 2 grinding machines connected at an angle. The first machine is designed for processing wider sheets of glass, while the second is for narrower sheets. At the inlet of the second machine, there is a centering device that corrects the position of the glass. Technical specifications of HE500: Minimum working size – 400x200, Itjdpfx Aszznuijm Hsl Working thickness – 3 – 25, Oscillating spindle – 1+1, Diamond spindles for grinding flat edges – 2+2 Diamond spindles for grinding bottom bevels – 1+1 Polishing spindles for bottom bevels – 1+1 Diamond spindles for grinding top bevels – 1+1 Polishing spindles for top bevels – 1+1 Polishing spindles for flat edges – 3+3 Spindles for rounding corners – 1+1 Engraving spindle – 2+2 Empty positions – 0 Total power of the XE line installation (kW) – 120 Conveyor belts, motorization: Belts driven by 4 brushless motors Mobile bridge movement Ball bearing guides, controlled by two brushless motors Summary: Bavelloni HE500L Double Edging Line – 1 set. TT5130 feeding table – 1 piece. Horizontal washing machine 2800 – 1 piece.

Year of construction: 1985, condition: used, Distance between centers: 1200 mm Copying attachment: Yes Isdsy A Hiqopfx Am Hotl Motor power: 1.5 kW Speed: 870 / 1400 / 2100 rpm

Condition: new, ALTENDORF Model F 2 Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Including special equipment: Ijdpfxol D Rp Es Am Hstl F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) F2/27 nesting for milling stations

Condition: used, mileage: 39,000 km, power: 103 kW (140.04 HP), first registration: 01/1980, fuel type: diesel, overall weight: 8,000 kg, color: white, gearing type: mechanical, number of seats: 7, Year of construction: 1980, - Used IVECO FIAT 79.13 truck with double cab, 7 seats, 5500cc, 130 hp diesel engine, Euro 0 emission standard, 80 quintals (8 tons) maximum payload, twin rear wheels, second registration in 2010 (first registration in 1980), 5500cc diesel engine, 130 hp, 39,000 km. The vehicle is equipped with a 2000-liter water tank and pump connections. For information on the equipment, please contact the owner. The vehicle is owned by the Civil Protection Agency of Rovello Porro. For information, please contact Mr. Moscatelli at 3.4.7.3.8.6.9.2.9.4. Itsdpfx Aoz Apl Sem Hsl