Used Guideline for sale (184)

Condition: used, maximum load weight: 34,250 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt from Equipment List: 09010.001 Braking system in accordance with ECE-R13 09020.001 Electrical system in accordance with ECE-R48 09050.001 The Kögel superstructure guideline must be observed! It can be accessed at [URL removed]. Chassis 10110.020 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch fifth-wheel coupling pin according to DIN 74080 / ISO 337 11110.105 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended) b) 2 x 20' ISO containers (frame extended) c) 1 x 30' ISO container flush at the rear (frame extended) d) 1 x 20' ISO container flush at the rear (frame retracted) e) 1 x 20' ISO container in the middle (frame retracted). 15200.140 4 pairs of heavy-duty lashing rings 27850.030 Rear frame extension, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable. Length adjustable via 1 pneumatic cylinder, low-maintenance guide on special plastic slides and 2 extension rollers. Automatic pneumatic locking of the extension. Suspension I 17160.013 Axle lift mechanism on axle 1 I 17165.113 Axle lift control fully automatic, load-dependent. Start assist: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). I 18330.210 Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120. Air suspension with approx. 180 mm suspension travel. Nodezkx Hnspfx Amysld Vehicle Tires 20540.170 Tires 6x 385/55 R 22.5, 160J (manufacturer of our choice) 20865.005 6 steel rims 22.5 x 11.75, offset 120 mm. Chassis Components 20110.010 Fifth wheel (manufacturer at Kögel's choice) mechanically with equalizing plate, 24 t lifting capacity. Single-sided operation on the right when driving forward. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular mudguards with spray flaps. 21300.001 2 chock blocks with holder I 22070.020 Lateral protective device, according to ECE-R73, closed. 27510.050 Underrun protection made of square steel tube according to ECE-R58 with a lamp carrier arranged above, protected. 27511.010 Height of the underrun protection profile min. 120 mm, designed for increased test loads. Brake / Air Suspension System 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connection ISO 7638, (without connecting lines), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 connection. 33420.070 Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving forward in front of the axle unit. 34320.001 2 non-interchangeable coupling heads in front ISO 1728 34410.010 Air reservoirs for the brake system and air supply made of steel (EN 286-2). Rear Impact Guard 42551.040 Solid steel rear impact guard at the rear end beam. Electrical / Electronics 60500.021 Lamp carrier made of steel, arranged above the underrun protection. 61100.220 KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED position lights and reflectors in front - flashing LED side marker lights - Superseal and bayonet connectors for the lights I 61500.110 2 LED outline lights with arm, mounted on multi-chamber tail light I 61910.120 2 LED multi-chamber lights

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 2500mm -Width: 2000mm -Plate thickness: 40 mm -Plate: with support ribs - Flatness: see photos (guideline not included) -Transport dimension: 2500/2000/H875 mm -Weight: 3110 kg Nlsdpfxjikn Rro Amyed

Condition: used, maximum load weight: 32,058 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2010, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2010, Equipment: ABS, 3 - Axle Schmitz Cargobull SCS 24/L-13.62 BS-E-DB VIN: 3131967 Chassis / Components: * Air suspension // Lifting and lowering * Jost support legs * 3 Rotos axle with disc brakes * Tires: 385/65 R22.5 * Remaining tread depth: Front ~30/40%, Rear ~20/30%, Middle ~30/40% * Jost axle load indicator * 1 x PVC storage box * Mounting for spare wheel 1x * Folding underrun protection Superstructure: * Tautliner Standard, suitable for rail transport * Internal side walls 600 mm * Certificate EN 12642 Code XL * Suitable for beverage transport according to VDI 2700 sheet 12/2009 * Daimler 9.5 cargo securing guidelines * Edscha * Side curtains * Tie-down points * 4 x Grab edges for rail loading Weights: * Gross vehicle weight: 39,000 kg * Tare weight: 6,942 kg * Payload: 32,058 kg Other: * German vehicle * Semi-trailer suitable for rail transport (rail loading) ---- New main inspections / safety checks or weight adjustments (reduction/increase) are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- Nlodpfx Aezkdizsmyed No liability for printing and typographical errors, changes, prior sale and errors; subject to change!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Through our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly help you in organizing special transports. Day plates / export license plates We will gladly assist you in obtaining export license plates/short-term license plates.

Condition: used, Year of construction: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line.  Technical details - Capacity: 9000 containers/h (varies according to bottle volume and product).  - Container  - Max. Diameter: 100mm  - Max. Height: 300mm  - Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  - Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted - Positronic control system for optimal adaptation to downstream filler - Machine, completely internally wired with attached control cabinet in mild steel, painted - Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 Combined filling and closing machine (block machine) | ALWID | SUPERIOR-16MDM-5SK - Fully automatic rotary filler - Filling system: mass flowmeter system, type: Endress+Hauser LPG MASS Njdpfx Amemfqm Dsyjld - Number of filling stations: 16 filling stations - Filling valve diameter: Ø12mm - Max. tank dimensions: height: 50-300 mm, Ø: 20-100 mm - Fully automatic round capper - Number of capping heads: 5 - With torque adjustment via slip clutches - With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator - With inside drop switch to switch off the machine in case of missing closures Checkweigher | ALWID | OCS-HC-M-2000-1 - Applied safety and machinery directives CE compliant - Industrial load cell with stainless steel housing based on the principle of electromagnetic force compensation - Force shunt free current transfer at the load cell - Front protection to reduce interference on the weighing result - Stainless steel control cabinet - Graphics-capable color TFT touch screen, 10.4 inch, VGA resolution - Flexible operability due to tiltable stainless steel operator terminal - Freely configurable user interface with simple, intuitive operation Inkjet Printer | Domino | Ax350i  - Fast printing of text and multi-line codes at high speeds  Labeler | ALWID | SES-120-III - Tandem design - Max. Label height: 120mm  - Photocell for label scanning - 2 x automatic winding station incl. counter pressure plate - Mounting device with height adjustment for lateral label dispensers - With adjustable side guides - passage width up to 150mm

Condition: as good as new (ex-display), Year of construction: 2024, The Dibipack 3246 EV shrink wrapping machine opens the range of Dibipack Evolution “one-step®” systems, as easy to use as the standard Dibipack models. But thanks to the full electronics, great flexibility in use and high performance in controls and some innovative patented devices are offered. An ideal solution for small and medium-sized production volumes, as it is competitive and inexpensive. INFORMATION Working cycle electronically controlled by a microprocessor. It is possible to save 8 different work programs Nsdpfjmt Dtvsx Amysld Automatic Sealing Time Adjustment: The machine will automatically adjust the sealing time according to the packaging speed. Ability to shrink when sealing is complete Retaining magnet included and adjustable: the hood remains closed until the end of shrinking. The hood can be opened after the fan has stopped to prevent hot air from escaping at the end of the cycle Reopening by gas pressure spring Begin control with proximity Energy Saving Function: The device enters standby mode when it is not working for a certain period of time Piece counter included Stand and scrap return on request The machine works with heat seal and shrink films such as PVC (BLUE FILM) or polyolefin films (GREEN FILM – GOLD FILM) Machine manufactured according to CE guidelines. TECHNICAL DATA – DIBIPACK 3246 EVX Power supply: 240V - 1ph Maximum power required: 2.1 KW Overall dimensions of the machine L x W: 1085 x 650 x 550 mm Worktop height (on stand): 920 mm Machine weight: 71 kg Sealing area W x L: 320 x 460 mm Maximum product height: 250 mm on request Impulse sealing system: bottom knife Maximum roll dimensions DIA x B: 250 x 470 mm Output: 4 - 6 pieces / min Programs: 8 Power consumption: KW / h 1.4

Condition: used, Year of construction: 2019, functionality: fully functional, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, A downdraft table combines a workbench with an extraction/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered by filters mounted in the table structure. The table can be placed in any location, at any welding or grinding station. The three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. The DraftMax Ultra features an automatic filter cleaning mechanism that is activated when the fan is turned off (offline cleaning) or when the pressure difference before the filter exceeds a certain value. The presence of compressed air is continuously monitored. Furthermore, an automatic start/stop device can be added to the DraftMax Ultra, providing even easier operation. This is the ideal table for very high-intensity welding or grinding applications. Work surface dimensions: 1366 mm x 750 mm Weight: 255 kg Noise level: 74 dB Nedszg Efvopfx Amyjld Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Flow rate: 2500 m³/h Filtration area: 2 x 26 m2 Filtration efficiency: >99.9% (filter class: M) Additional LED lighting Stock number: 1142

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Nsdjzcaufopfx Amyeld Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Manufacturer: ZEISS Nljdpfsyzmbdex Amysd Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head ✅ Stylus rack / magazine ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Condition: excellent (used), total width: 36,000 mm, total length: 90,000 mm, total height: 9,500 mm, For Sale: High‑Quality Steel Warehouse Hall Structure – ASTRON LINDAB Good morning, We are offering for sale an exceptionally solid and durable ASTRON LINDAB steel warehouse hall structure with a total area of approximately 2,800 m² and a height of over 8.5 meters. Nlodoylc Uyspfx Amyjd This structure was originally erected in Warsaw for the renowned company PURMO RETTIG HEATING, a global leader in the heating industry. A few years ago, the entire property on which the hall was located was sold and redeveloped into a new residential complex. As a result, the warehouse hall was fully dismantled under the supervision of ASTRON LINDAB representatives. All structural elements were then transported and reassembled on another of our properties, strictly in accordance with ASTRON LINDAB guidelines. The dismantling and reassembly were carried out by a professional, specialized company. Every structural element has been catalogued, labelled, and numbered. Technical Specifications: Total area: approx. 2,800 m² Span width: 36.6 meters Total length: 90 meters Height: 8.64 meters (maximum height 9.36 meters) Number of segments: 14 No internal support columns Modular Sale Option The hall can be sold as two or three smaller modules, for example: 1,500 m² / 1,000 m² / 800 m² Please note: the price of smaller modules is 25% higher. The current market price of a new, identical structure is approximately: PLN 1,700,000 net / EUR 400,000 net Important Information: We are selling only the steel structure, including all steel tension elements and structural bracing, steel structures of the side walls and roof. Roof and wall cladding panels are not included and must be purchased new and installed after erecting the structure. Additionally, we have all original bolts, nuts, and dismantled components, carefully sorted and stored in two large maritime containers. We also possess the original hall design documentation and can provide access to a structural engineer if a new adaptation or a building permit design is required for this structure. This offer represents a unique opportunity for anyone planning to construct a similar warehouse hall at a significantly reduced cost. PRICE: EUR 179,000 netto (750.000zł netto) We invite serious buyers to contact us.

Year of construction: 2010, condition: used, machine/vehicle number: HO1, Used Tetra Pak 4.3 T aseptic homogenizerTechnical Specifications & Performance DataThis industrial homogenizer is engineered for high-pressure processing and reliable particle-size reduction across beverage and food applications. Manufactured by Tetra Pak, the TA200 platform is recognized for stable operation, hygienic design, and robust components suitable for continuous-duty production. This unit is associated with a 250 bar rating, aligning with common requirements for dairy, juice, and beverage processing prior to filling and packaging on a used bottling line or second hand industrial packaging system.Manufacturer: Tetra PakModel: TA200Pressure rating: up to 250 bar (as indicated on the machine type plate)Design intent: High-pressure homogenization for beverage productionCE marking: PresentAseptic capability: Includes preparation/upgrading to aseptic homogenizationApplication scope: Beverage production and industrial packaging linesAdvanced Automation & Control SystemsThe TA200 platform from Tetra Pak is designed to integrate with modern automation architectures used in beverage production. Typical interfaces support upstream and downstream synchronization with processing and bottling equipment. Operator-friendly controls and clear status indication help maintain repeatable results and reduce downtime.Integration-ready control interfaces for line automationProcess monitoring for pressure and flow stabilityDesigned for consistent homogenization performance at set pressureSafety interlocks aligned with industrial practiceProduction Line Integration CapabilitiesThis homogenizer is suitable for installation upstream of fillers and other bottling equipment within a used bottling line or a second hand beverage production plant. Its aseptic upgrade preparation supports integration into hygienic and ultra-clean process segments where product protection and shelf-life are priorities.Compatible with standalone or inline operationInterfaces with mixers, pasteurizers, and fillers in industrial packaging linesFlexible placement before filling of PET or glass containersSuitable for multi-product beverage workflowsMachine Condition & Maintenance HistoryThe unit is presented for sale with inclusion of preparation/upgrading to aseptic homogenization. It is positioned for rapid commissioning into beverage production environments. Routine maintenance practices can be applied in accordance with Tetra Pak guidelines to preserve performance and reliability.Commercially offered as a second hand industrial assetReady for operation subject to standard installation and commissioningOperational Performance & VersatilityHigh-pressure homogenization improves stability, mouthfeel, and product uniformity, enabling downstream filling into PET and glass packaging. The TA200 platform is widely used in beverage production where consistency and quality control are essential.Stable particle-size reduction at defined ... Njdpozd Ul Tjfx Amyeld

Condition: new, functionality: fully functional, color: orange, operation weight: 2,300 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2026, Equipment: additional headlights, cabin, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, HITACHI 23U-6 MTC with an operating weight of approximately 2,360 kg and a FULLY HYDRAULIC 360° OILQUICK OQR30 quick-change system - Base unit 23U-6 MTC - Cab and blade - 230 mm rubber tracks - 970 mm boom - Monoblock boom, laterally adjustable - Leak oil line - Automatic release for hammer/grapple - Hammer/shears and grapple hydraulics > all operated via the joysticks - IFM monitor for switching the auxiliary circuit Attachments: Rotator OILQUICK OQR30-R02 Demolition and sorting grapple, 300 mm cutting width Rigid trenching bucket, 1,200 mm cutting width Grading bucket, 800 mm cutting width Clamshell – deep excavation grapple, 400 mm cutting width Manufacturer's warranty: 60 months or 3,000 operating hours, whichever comes first, in accordance with the manufacturer's guidelines. All wear parts are excluded. Inspection possible at any time. Nedpszg E H Hofx Amyjld Financing and leasing available upon request.

Condition: new, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Krone SZK 18 eLB41-LI – Dry Liner Box Trailer Basic Data Nljdpfx Aozf Tfbjmyjd * Vehicle Type: SZK 18 eLB41-LI * Coupling Height Unladen: 1,150 mm Weights (Registered / Technical) * Fifth Wheel Load: 12,000 kg / 12,000 kg * Axle Load: 18,000 kg / 18,000 kg * Gross Vehicle Weight: 30,000 kg / 30,000 kg Dimensions * Body Dimensions: 13,620 x 2,480 mm i.L. * Internal Height: 2,715 mm * Loading Height Rear Portal: 2,650 mm * Unladen Vehicle Height: approx. 4,000 mm * Front Height: 100 mm (incl. floor) Axles * 2 axles, each with 9,000 kg load capacity * 2nd axle as a lift axle * KRONE axles with air suspension and disc brakes * Brake disc: 430 mm * Aggregate distance: 8,135 mm * Wheelbase: 1,310 mm * Warranty: 6 years without mileage limitation Tires & Rims * 4x 385/65 R 22.5 M+S * KRONE Smart Tyre Monitoring * Without spare wheel Braking System * EBS 2S/2M with ABS * Spring brake parking brake * Braking system: WABCO Box Body * Closed body * Side walls: Sandwich panel 28 mm, steel outer layer, insulated * Roof: Sandwich panel 30 mm, PU core, insulated * Forklift protection inside, on the sides: 320 mm high * Front wall: Steel sheet, inside 9 mm screen-printed panel * Rear wall: Steel container door with seal * LED light strip in the cargo area on the left * 2 ventilation louvers per side * 2 rows of lashing rails (800 mm / 1,600 mm above floor) Floor * 30 mm waterproof glued plywood floor * Strength according to EN 283 up to 7,000 kg forklift axle load Lighting * Complete LED * Multifunction rear lights, full LED (Hella Gen.2) * LED side marker lights with flashing function * Outline/brake lights at the rear, top Certificates * EN 12642 Code XL * VDI 2700 Beverage Transport * Daimler Guideline 9.5 * CEMT/CM certificate Paint * Chassis: RAL 9005 Deep Black * Box body: KRONE White * Roof: RAL 9010 Pure White

Condition: used, maximum load weight: 31,240 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 03/2027, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2023, Equipment: ABS, LANGENDORF/ FTS 3-Axle Aluminium Tipper "Combiliner" First registration 03/2023, single owner Mileage only 114,761 km The transport solution for intermodal haulage of both liquid and solid goods without conversion. The module can be removed at any time. System advantages: Avoids empty runs through swap operations. For seasonal transports, can be converted to a pure tipper for higher payload. Economical and ecological benefits. Module installed in the tailgate, tipper usable without restrictions. Rinse function. The vehicle complies with QS and GMP+ guidelines, certified by TÜV Süd. Unladen weight approx.: 7,760 kg Tipper volume 47.5 cbm Slurry bag volume 26.5 cbm Pneumatic vibrator Grain outlet in the floor, grain channel with dust protection sack Aluminium water tank 50 L with compressed air connection, hose reel, and shower head (as required by QS and GMP) SAF axles in reinforced "CD" version, with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO Trailer EBS with rollover stability support (RSS) WABCO Optiturn for reduced turning radius WABCO Smartboard with axle load display Six 385/65 R 22.5 tyres SPEEDLINE high-gloss aluminium rims FTS Combiliner module equipment: Vogelsang rotary lobe pump GL 186-184Q, weight-optimised Spade slide valves 4-inch and 6-inch Operation via remote control and programmable sequences Manual control unit on top for all hydraulic functions 2-tank venting/degassing and overflow Rinse function via two flange connections (left/right rinsing) Rinse baffles in the wire baskets Electric motor-driven winding reel with hydraulic brake RENTING is the new BUYING—immediately available from us, also as a FULL-SERVICE RENTAL----- Nlsdpfxoy Iq Inj Amysd

Condition: new, Airplan — Modular Drying Kit for Lumber & Pallets Short Description Airplan is the simplest and most cost-effective solution for drying wood, especially softwoods. It is a ready-to-install kit designed to be mounted inside a structure you construct yourself (according to our supplied drawings), with a capacity of up to 25 cubic meters. With Airplan, you minimize your investment while achieving precise and professional drying results for lumber or pallets. What It Is Airplan is a comprehensive drying kit that includes everything required to convert a simple enclosure into a professional wood-drying chamber. We provide the structural drawing—you build the housing, install our kit, and you're ready to start drying. Main Components - 3 industrial axial fans for controlled air circulation - Electric heating element kit to ensure reliable heat supply - 2 automatic dampers for optimized air exchange and humidity regulation - Electrical control panel with drying software interface, including all necessary power and control connections - Water spray pipe with nozzles Key Benefits - Minimal capital investment—purchase only the essentials, not an entire prefabricated kiln - Reduced transport costs due to the compact kit format - Fast and straightforward installation with user-friendly operation - Professional-grade components and high-quality materials for long service life - Precise drying control suitable for both lumber and pallet production Applications - Small to medium-sized sawmills Njdpsxnbctefx Amyjld - Pallet manufacturers - On-site drying operations where a complete kiln is not economical - Pilot installations before scaling up to larger systems What We Provide - Complete Airplan kit (see components above) - Structural drawing and installation guidelines - Basic start-up support and commissioning instructions Next Steps / Contact For a quote, technical information (electrical requirements, power ratings), or the structural drawing, please contact us with your desired drying capacity and planned enclosure dimensions. We will tailor the configuration to your needs and provide a detailed offer.

Condition: good (used), Code: 0288 Brand: SAC Model: F 12 Automatic working center for door and wooden window frames Technical data: Tenoning side : End cutting circular saw - Blade diameter mm 400 Motor power Hp 4 Horizontal positioning with indexing stops N° 2 tenoning spindles each lenght mm 320 Max tools diameter mm 320 Spindle diameter mm 50 Motors power each Hp 10 Max thickness of pieces mm 100 N° 2 suction inlets mm 130 Automatic table with guideline Profiling side: N° 4 profiling spindles each lenght mm 270 - Spindle diameter mm 50 Motors power each Hp 10 N° 4 suction inlets mm 130 Glass bead recovery device - Motor power Hp 3 - Blade diameter mm 200 Exhaust outlet diameter mm 60 Glass bead recovery device - Motor Hp 3 Exhaust outlet diameter mm 100 Adjustable feed speed Return roller conveyor Overall dimensions - tenoning machine : mm 2900 x 2400 x 2200 h Nsdsyg Iq Nspfx Amyjld Overall dimensions - profiling machine : mm 2900 x 1400 x 1800 h Total weight kg 2900

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 830397, functionality: fully functional, power: 85 kW (115.57 HP), temperature: 1,000 °C, inner dimension length: 1,600 mm, inner dimension width: 700 mm, inner dimension height: 950 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Used in a large German corporation, adhering to applicable guidelines and maintenance recommendations. ACQUISITION COSTS Original purchase price in 2008: €490,000 plus VAT Retrofit in 2022: €254,000 plus VAT TECHNICAL DETAILS Dimensions of the heat treatment unit Housing width, including control cabinet: 3,600 mm Overall length with attachments: 7,000 mm Height above furnace floor: 4,900 mm Loading height above furnace floor: 1,200 mm Pit depth: 630 mm Internal height of the furnace chamber: 950 mm Internal depth of the furnace chamber: 1,600 mm Internal width of the furnace chamber: 700 mm Temperatures Rated furnace temperature: 1,000 °C Operating furnace temperature: 850 °C Oil bath temperature: 60 °C Dimensions of the furnace control cabinet Width: 2,000 mm Depth: 600 mm Height with 100 mm base: 2,100 mm Weights and Volumes Weight of multi-purpose chamber furnace: 22,000 kg Oil bath volume: 7.5 m³ Weight of switchgear: 600 kg Total weight of furnace with oil and charge: 30,000 kg Energy Data Total connected load: 85 kVA Supply voltage: 400 V Supply frequency: 50 Hz Number of phases: 3 Oil bath heating: 2 x 21.6 kW Motor power, heating chamber circulation fan: 5.5 kW Motor power, pre-chamber circulation fan: 2.2 kW Nodpfx Amoy Uxt Eeyeld Motor power, oil bath air cooler: 3.0 kW Motor power, lifting table: 11 kW Motor power, loading machine: max. 38 kW Current draw, pre-chamber door: max. 17.2 A Current draw, heating chamber door: max. 13.2 A Motor power, combustion air fan: 1.5 kW Motor power, oil bath pump for oil bath: 2.2 kW Motor power, cooling air blower: 0.75 kW Motor power, oil bath circulation fan: 2 x max. 11 kW Motor power, oil bath pump for cooling plates: 1.1 kW Motor power, batch oil circulation pump: 3 kW Batch dimensions with base grate Height: 950 mm Width: 700 mm Length: 1,600 mm Weight: 1,000 kg Note: The dismantling and loading of the furnace must be organized by the buyer.

Condition: used, mileage: 957,000 km, first registration: 01/2019, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, -Peterbilt 389 -First registration: 2019 -Paccar engine -Euro 6 -Mileage: approx. 957,000 kilometers -Automatic transmission -Engine partially overhauled -New differentials -Axle locks -Adjustable fifth wheel -Aluminum rims -Aluminum tanks -ABS -Rear axle with air suspension -Disc brakes on the front axle -Cruise control -Engine brake -Adjustable steering wheel -Air conditioning -Auxiliary heater -LED lighting -Electric windows -Electric mirror adjustment -Heated mirrors -Air suspension seats with armrests -2x sleeper berth -Radio -Refrigerator -Stainless steel fenders on the rear axle -Digital tachograph -Braking system converted to comply with EC standards -24-volt lighting and ABS system for semi-trailer operation -10 new tires The vehicle is sold with German registration. All vehicles receive a full service/inspection before sale. Price: €122,000.00 net More pictures can be found on our website: Nlsdpfx Amszct Irjyjd Errors and prior sale excepted. Certified according to ISO 9001:2015 Each imported truck is converted in our workshop according to EC guidelines, e.g., the braking system. Furthermore, we customize the vehicles according to customer requirements. Examples: Individually manufactured stainless steel parts, interior fittings, upholstery (leather, fabric), etc. Auxiliary drives and ADR approvals are also possible in our workshop. If your dream vehicle is not listed, please contact us. We will then import your dream truck (all manufacturers in used or new condition). The prices include: Shipping, customs clearance, conversion according to EC guidelines, German TÜV inspection, emissions test.

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm Nodju Nfttjpfx Amyold stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 7, loading space volume: 12 m³, loading space length: 3,540 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Welcome to carmax24! Today you have the opportunity to purchase one of our selected, inspected vehicles. Expertly assessed and high-quality vehicles have been ensuring high customer satisfaction since 2008. This is our daily commitment, because at carmax24, you, the customer, always come first. RENT-TO-OWN • LEASING • FINANCING AT TOP RATES NEW MODEL: Iveco Daily 35S18HA8 V - 7 seats Wheelbase 3520 mm, single rear axle wheels Color: Grey IC 370 EURO 6 engine: 3.0-liter diesel Maximum output: 176 HP (129 kW), maximum torque: 400 Nm at 1500 rpm, 4 in-line cylinders, Turbocharger with variable geometry (eVGT) Transmission: AUTOMATIC HI-MATIC Equipment highlights include: - 00676 Reversing camera with guideline assist - 00726 Spare wheel in a retractable basket under the rear overhang - 01565 Fuel tank: 85 l - 02210 Spare wheel - 05925 Additional adjustable fixed speed limiters - 06520 12V electric trailer sockets, 13-pin DIN - 06767 Double rear doors opening 270 degrees - 07820 Ball hitch for trailer - 08623 Reinforced rear parabolic springs with minor deflection for S models Nlsdpfx Aeym I D Njmysd - 08650 Third brake light, illumination - 79336 Daily dummy chrome radiator grille with belt - 01553 Gunmetal emblems - 02443 Leather steering wheel - 02308 Daily alloy wheels - 72625 Full LED lighting COMFORT PLUS PACKAGE - 00259 Swivel Comfort Seat (3-position adjustment, lumbar support, armrest) - 01611 USB A+C ports for driver and co-driver - 75082 2-seater passenger bench with folding table, 3-point seatbelt - 07196 170 cm3 air conditioning compressor - 01605 MY IVECO NAVI infotainment system with 10-inch display - 06555 Fog lights - 14522 Adaptive Cruise Control (ACC) with radar sensor - 06650 Cab ventilation and heating system with automatic air conditioning - 79297 Fully upholstered headrests with memory foam, Daily logo In-stock vehicle, immediately available Our special services for you: * Full service history at authorized partners and certified workshops * Winter tires available for an additional charge * Extended warranty up to 36 months available at extra cost * Fair trade-in offer for your used vehicle * Financing from 6.99% with or without down payment, up to 96 months (subject to credit approval) * TÜV / DEKRA major and emissions inspection * EU net sales possible - intra-community supply with valid VAT ID * Non-EU (worldwide) sales possible including export declaration, supplier’s declaration * Nationwide delivery available for an additional charge * Registration service for export and temporary license plates, incl. insurance and registration fees All details provided on the internet are non-binding descriptions. Errors and mistakes reserved. The information provided does not constitute a guaranteed feature in the sense of § 434 para. 1 sentence 3 BGB (German Civil Code).

Condition: used, mileage: 192,154 km, power: 103 kW (140.04 HP), first registration: 11/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 01/2028, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M546----MAN TGE 3.140 EURO6 L4 H3 Mileage: 192,154 km FULL SERVICE HISTORY The complete vehicle history is available in digital form. All inspections have been carried out by an authorized manufacturer's workshop. 1st owner----As-new M+S tires----3 seats ----* Crosswind Assist * Hill Start Assist * Emergency Braking Assist * Rear View Camera * Air Conditioning * Start/Stop System ----Automatic----Long Wheelbase + High Roof----270° Rear Doors----* Central locking with 2x remote controls * On-board computer Nsdpfxsy N Iifo Amyjld * Bluetooth * USB * SD card * Mini SD card * 2x 12V sockets * 3 seats * Electric windows * Wooden loading floor with 12 tie-down rings * Lashing rails * Storage compartment in cab * LED lighting in cargo area + cab ----Model year: 2019 Transmission * 6-speed manual gearbox Equipment packages * Comfort Package * Storage Package: Version 2 Driver Assistance Systems & Camera * Front Assist * Emergency Braking Assistant * Hill Start Assistant * Brake Assist * Crosswind Assist Lighting & Visibility * Rain sensor * Heat-insulating glazing Audio & Communication * Digital radio (DAB+) * USB port * Mobile phone preparation Comfort * Climatic * Central locking with remote control * Front cup holders * Front passenger bench seat for 2 passengers Interior * Artificial leather seats * Interior color: anthracite * On-board computer * Rubber flooring Exterior * Drive type: Front-wheel drive * Electrically adjustable and heated exterior mirrors * Sliding side door (right) Safety * Driver/passenger airbags * Electronic Stability Program (ESP) * Immobilizer * C-rails Additional Equipment * Vehicle tool kit and jack * Reinforced suspension/damping and stabilization * N1G configuration with up to 3 seats * Reinforced front axle ----On request, we can retrofit a tow bar. Professional installation – fast and reliable, starting from €599. +++ Exclusive offer at Autohaus Mat GmbH: Up to €1,000 trade-in bonus – your advantage when changing vehicles! +++ Contact us directly via WhatsApp at: Why choose Autohaus Mat GmbH? 1. Attractive trade-in: We handle the transaction quickly and fairly. Maximize your vehicle's value with our trade-in bonus and benefit when purchasing a new model. 2. Individual financing solutions: Want to finance your new vehicle? We offer tailored financing options to suit your needs: * With or without down payment * Flexible terms * Prime conditions 3. Personal customer service: Our experienced team supports you from consultation to vehicle handover. 4. Additional services: * In addition to sales, we offer exclusive services for a smooth process: Worldwide vehicle sales: We assist with purchase and export, wherever you are. * Transit plates: We provide export or temporary plates for transport. * Customs clearance: We handle all formalities for export abroad. * Vehicle delivery: Safe and punctual delivery straight to you. Important: All offers are subject to availability. The vehicle description serves as a guideline; legally binding are only the entries in the sales contract or order confirmation. For vehicles with VAT, net sales for export are generally possible if all required documents are provided.

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, Specification: External Roller 20 AR * Novagrau * 2-axle trailer chassis for containers * External roller version (20AR) * Dimensions and Weights * External reference length approx. 6,896 mm * Overall width approx. 2,500 mm * Ride height loaded approx. 1,175 mm * Roller track length approx. 6,880 mm * Wheelbase 5,100 mm * Unladen weight (complete) approx. 3,860 kg Nodeyv Ttpspfx Amysld * Technical possible gross weight approx. 20,000 kg * Permissible gross weight approx. 18,000 kg * Payload approx. 14,140 kg * Suitable for containers from 5,000 to 7,000 mm length according to DIN 30722 * Chassis with cross members, welded box-section main beams * Made from QSTE steel * 4 container locks, pneumatically operated * Side underrun protection closed according to RL 89/297/EEC * Pivot mounting * Pivot mounting 980 FM incl. ball race ring 90/1100/22 (low maintenance) * Drawbar * Drawbar 2600/980/100/30, towing eye inclined * With height adjustment (tension spring with turnbuckle) * Drawbar with DIN towing eye, internal Ø=40mm, external Ø=110mm, thickness 30mm * Axles * 2 x 10 t axles for 19.5 disc brakes, brand according to manufacturer selection * Brake disc diameter approx. 370mm * Wheel attachment by central centering as per DIN 74 361 part 3 * Brake System * Pneumatic brake system according to EU guideline with Duomatic coupling head * Conventional air suspension * EBS Type 4S/3M, Electronic Braking System with ROLL Stability * Double diaphragm spring-actuated cylinders on rear axle * Release valve for individual release of spring parking brake * Lighting System * 24 Volt full LED lighting system to RL 76/756/EEC with multi-chamber tail light and license plate light integrated in lamp bracket * 1 x 15-pin socket * 6 LED side marker-reflector lights with flash function * 2 LED white position lights at the front * 2 separate LED lane marker lights at the rear * 1 additional reversing lamp * Regional haulage tires, brand as per manufacturer selection * 8 x 265/70R19.5 (7.5x19.5) * Steel wheels ET 138 * Wheel nuts unpainted * Including tire pressure monitoring system * Rear underrun protection made from aluminium * Two vertical Delta anti-collision profiles to protect the rear when loading/unloading * Accessories * 4 plastic fenders (half-shell) front and rear, single wheel fenders * 4 anti-spray mudflaps, neutral * 1 lockable plastic toolbox * 1 wheel chock with holder * 1 A-sign for waste transport * 1 hanging net box * Chassis color: MB7350 Novagrau * Wheel hub color: black KTL * Rim color: RAL 9006 Silver * Rear contour markings: red * Side contour markings: white * Closed SSE: RAL7001 silver grey * Rear panel/light plates: RAL7001 silver grey * Underrun protection: aluminium anodized (silver) All information subject to change. Errors and prior sale excepted.

Condition: used, mileage: 788,500 km, power: 335 kW (455.47 HP), first registration: 01/2018, gearing type: automatic, emission class: euro6, Equipment: air conditioning, -Peterbilt 579 -First registered: January 9th, 2018 -Paccar engine -455 HP -Euro 6 -10-speed Eaton Fuller automatic transmission -Mileage approx. 788,500 kilometers -Disc brakes -Rear axle, air-suspended -Adjustable fifth wheel -Axle lock -Aluminum rims -Aluminum tanks -Full fairing -Adaptive cruise control with brake assist -2x sleeping berths -2x seats, air-suspended -Refrigerator -Cruise control -Air conditioning -Adjustable multifunction steering wheel -On-board computer -Digital tachograph -Radio -Brake system converted to EC standard -24 volt light & ABS system for trailer operation -German registration The vehicle has just arrived and is currently being converted. But it can be viewed at any time. Price: 87,800.00 ¤ net You can find more pictures on our homepage: Subject to errors and prior sale Certified according to ISO 9001: 2015 Every imported truck is converted in our workshop according to the EC guidelines, e.g. the braking system. We also refine the vehicles according to customer requirements. Nlsdpsp Nny Ujfx Amysd Examples: Individually manufactured stainless steel parts, interior fittings, paneling (leather, fabric), etc. PTO and ADR approvals are also possible in-house. If your dream vehicle is not included, contact us. We will then import your dream truck (all manufacturers, used or new). The prices include: Shipping, customs clearance, conversion according to EC guidelines, German TÜV approval, AUv

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel Nledey Ei R Aepfx Amyjd • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions Nedpfx Asy Ei Rvsmysld • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Description Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Type: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel coupling with sliding mechanism and self-lubricating (Jost JSK type), mounted on support frame • Reversing camera fully installed Bodywork: • Execution of all chassis modifications required for crane installation, including removal and installation of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork modifications are carried out in strict compliance with the bodybuilder guidelines of the respective chassis manufacturer and executed in premium quality. • Complete assembly of a proprietary designed and in-house manufactured special subframe made of fine-grained steel for crane and superstructure. The fully welded and bolted subframe to the chassis frame guarantees exceptional torsional rigidity and outstanding stability for the crane vehicle. A unique feature is the subframe construction, executed to the highest quality and coated in chassis color. • Installation/bolting of the crane and main outrigger support on the subframe. Installation of all hydraulic and electrical connections. Installation position: Front • Removable drop-side platform in steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Platform body painted in RAL (chassis colour) • Removable aluminium side boards by Suer, height 600 mm, anodised finish with step treads, removable Kinngripp stakes • Standard platform floor with welded 4 mm steel checker plate painted in RAL (chassis color) • 6 retractable lashing eyes, 2500 daN each side, set in perforated rails for flexible arrangement • 4 chain lashing points 6500 daN (2 front, 2 rear on body) Nlsdpfx Aoy Ei R Nemyed • Robust front wall made from welded frame, welded 4 mm sheet steel and 5 accessory hooks, wall height approx. 1300 mm, painted steel version, with 2 folding lashing eyes welded on for securing straps • Cladding panels, mudguards made from aluminium checker plate (sandblasted, powder-coated, and painted); please specify RAL color • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder-coated, and painted); specify RAL color; size and arrangement depend on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stake pockets, 2 rows (as agreed), approx. 80 cm from front and rear walls • Holders (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizing support mounted under chassis • Installation of underride protection at rear and additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections at front for semi-trailers and also at rear for trailers New crane, FASSI F545 RA 2.27, continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support pads with holders, arrangement per production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual, crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 beacons on the FH roof • 2 strobe lights in engine hood • 2 LED lights under bodywork at rear, left and right, position per agreement • 4 LED working lights, 2 each left and right