Used Granulator Cpm 9042-12 for sale (21,370)

Condition: ready for operation (used), Indramat MAC090C-1-GD-1-B/110-A-2/-I01250/SO13 motor SN: MAC090-42934 - Tacho constant 3.0 V / 1000 min-1 / brake 14 Nm DC 24 V, used, good condition, 100% functional, delivery as per photos. Lajdpfsxtv U Uox Ancoa

Condition: ready for operation (used), Rexroth HDS03.2-W100N-HS12-01-FW controller, MNR: R911190010, SN:291389-04261, controller has been factory overhauled by the manufacturer, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ljdpfxjx Dw S Ne Ancsaa

Condition: ready for operation (used), Heidenhain UVR 150D ID: 390 421-01 SN: 12932146 – with test report, professionally overhauled and fully tested with 3 months warranty, 100% functional, scope of delivery as per photos Lodex Dw Dfepfx Ancsaa

Condition: ready for operation (used), Heidenhain UVR 150D ID: 390 421-01 SN: 12932146 – with test report, professionally overhauled and fully tested with 3 months warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange procedure, your defective core must not have mechanical damages such as breakages, as these cannot be repaired. In such cases, an additional invoice of €1,000 including VAT will be issued. Attention: You are bidding on an inverter from Heidenhain, Heidenhain UVR 150D 390 421-01 SN12932146 as an exchange service, professionally and completely overhauled and tested with 3 months warranty, 100% functional, delivery contents as per photos. In both the repair and exchange procedures, your returned unit must not show any mechanical damage such as breakage, as these are irreparable. Otherwise, a subsequent charge of €1,000 incl. VAT will be made. Lsdpfox Dw Dlox Ancsaa

Year of construction: 2019, condition: like new (used), Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20D.(Payload: 20kg, H-Reach: 1717mm, Robot Mass: 280kg, 2009.01) Lsdjh Aiy Sopfx Ancjaa 1 x YASKAWA DX100 controller.( 2009.02 ) 1 x LASERLINE LDM 1200-60 Diode 1320W Laser.(2015.10) 1 x LASERLINE laser welding head OTS-5 with Crossjet and cam.(2017.12) 1 x Cooling water circulation 2 way system HYFRA Sigma7 for laser and optics.(2018) 1 x siegmund table 1200x800.(2019) Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: new, Year of construction: 2025, Laser source: Raycus or Max: 4/6/8/12 kW Lodpfei Apfzjx Ancsaa Laser head: 3 D BOCI , Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Positioning accuracy: ±0.05/1000mm Repeat accuracy: ±0.03/1000mm Acceleration: 0.8g (m/s²) Rotation speed: 60 rpm Max. Positioning speed: 60 m/min Max. Max. weight of a tube: 1500kg 1.Raycus 6000W laser source 2.BEVEL laser head 3.welded frame DPL 4.Schneider electrical components 5.helical rack KH 6.techmech reducer 7.Yaskawa servomotor 8.SHAC guides 9.integrated power control 10.FScut 5000 software 11.integrated electrical cabinet 12.HANLI water chiller 13.cantilever gantry axis-X FHBS 14.automatic waste collection 15.crawler-type automatic workpiece collection 16.automatic support system 17.loading frame 12000mm 18.unloading frame 12000mm

Condition: like new (used), functionality: fully functional, In this offer you purchase a used colour production system "Canon imagePRESS V1000 ’ from 12.2023 Object of sale: 1 x Canon imagePRESS V1000 with the following equipment: 5212c003 - Canon Fixing Station V1000 5948c003 - Canon Resale Licence 5222c003 - Canon Booklet Finisher AF1 5214c003 - Canon Multi-Drwaer Paper Deck E1 5936c001 - Canon PrismaSync 5606c001 - Canon Duplex Colour Image Reader P1 5261c001 - Canon Operator Attention Light A1 Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Laedpfsu Tqnusx Ancea Meter readings: Total: Approx. 1,686,664 pages Condition: This offer is for a used device which is in mint condition. The device has been fully tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 75 kW (101.97 HP), For sale: fully operational pellet production line. Lsdpfxjw Ry U Io Ancoaa

Condition: not inspected (used), Year of construction: 2020, machine/vehicle number: 0110-36643, functionality: unexamined, total height: 1,500 mm, total length: 750 mm, total width: 600 mm, overall weight: 30 kg, rotational speed (max.): 2,850 rpm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Speed: 2,850 rpm Laedpfx Asyn H Nasncea MACHINE DETAILS Operating voltage: 230 – 240 V Frequency: 50 Hz Rated current: 2.4 A Connected load: 550 W Dimensions & Weight Dimensions (L x W x H): 750 x 600 x 1,500 mm Weight: 30 kg External reference: Pieper – Lot 12

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: W4X133X02132, Year of construction: 2020, operating hours: 3,929 h, lifting height: 1,574 mm, mast type: duplex, construction height: 1,315 mm, fork length: 1,200 mm, Service due: 03/2027 1,200 kg Initial Lift Pallet Stacker High Lift Truck Ameise No reserve price - Guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lift height: 1,574 mm Fork length: 1,200 mm Design: Stacker MACHINE DETAILS Operating hours: 3,929 h Mast type: Duplex Drive type: Electric Battery: 09/2020, 24 V, 4 PzS, 500 Ah, measured at 24.9 V (very good condition!) Dimensions & Weight Dimensions (L x W x H): 2,700 x 800 x 1,315 mm Weight: 1,500 kg Ljdpfoyzf Szsx Ancoaa EQUIPMENT Former Linde full-service unit Initial lift Can lift 2 pallets at once Good ground clearance for uneven floors All dimensions are approximate. No liability is accepted for errors in writing or measurement. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Collection ONLY with email proof of payment! Collection WITHOUT appointment Monday to Friday 7:00–16:30. An excessively tall mast can be dismounted for transport upon request. If not collected within the specified time, a storage fee of €20 per machine per day will be charged (balance must be paid before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X387G02976, Year of construction: 2016, operating hours: 2,407 h, load capacity: 1,200 kg, lifting height: 4,625 mm, free lift: 1,519 mm, mast type: triplex, DGUV certified until: 11/2026, Equipment: UVV, 1,200 kg Triplex, Service + UVV until 03/2027 No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lift height: 4,625 mm Overall height: 2,121 mm Free lift: 1,519 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Lsdsyzf D Ropfx Anceaa Dimensions & Weight Dimensions (L x W): 2,800 x 1,100 mm Weight: 2,900 kg Operating hours: 2,407 h Battery: V 5PzS 625Ah, very good performance, measured at ,9V EQUIPMENT Former Linde full-service unit Service + UVV valid until 11/2026 3rd and 4th control valves Sideshift Triplex mast with full free lift All specified dimensions are rounded. No liability is assumed for typing or measurement errors. COLLECTION CONDITIONS Loading from the side for up to 5 t possible onsite with large forklift at your own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT prior appointment Monday to Friday, 7:00 a.m. – 4:30 p.m. If the mast is too high for transport, it can be dismantled on request. If collection is not completed within the specified period, a storage fee of €20 per day per machine will apply (additional payment must be made prior to collection).

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Lsdpfx Aot Hmt Isnceaa Max. panel length: 1250 mm No of injectors: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, mileage: 12,868 km, power: 302 kW (410.61 HP), first registration: 12/2016, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2027, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2016, Equipment: air conditioning, all wheel drive, IVECO Hi-Trak TRAKKER AT-260 T 41 W ? ALL-WHEEL DRIVE ? COC available! EX-GERMAN ARMY VEHICLE Original 12,868 km * First registration: 12/2016 * Euro 6 * Manual transmission * Unladen weight: 13,430 kg * Front axle tires approx. 13 mm (Goodyear) * Rear axle tires approx. 21 mm (Goodyear) * 1x sleeper bunk * Auxiliary heater * Air conditioning Viewing possible at any time during our business hours, test drives available by appointment! Laedpfx Asy Euavencja For export sales, a deposit is required, which will be refunded after receipt of the Confirmation of Arrival. Company logos or advertising stickers on the vehicles may have been digitally modified in the photos. No guarantee is provided for the functionality of the extras. All information is provided without guarantee – errors, changes, omissions, and prior sale reserved. Vehicle descriptions do not constitute warranted characteristics. Please refer to our terms and conditions and ensure you are familiar with them.

Condition: used, Year of construction: 2024, load capacity: 25,000 kg, lifting height: 3,100 mm, total length: 8,880 mm, · Lastschwerpunktabstand: 1200 mm · Lastabstand, Mitte Antriebsachse zu Gabel: 1070 mm · Achsabstand: 4250 mm · Achslast, Last vorn: 15500 kg · Achslast, Last hinten 53800 kg · Achslast, vorn ohne Last 17400 kg · Achslast, hinten ohne Last 4100 kg · Spurweite, vorn / hinten 2200/2140 mm · Reifendruck 1,0 MPa · Mastneigung, α = vorwärts / β = rückwärts: 5/10° · Sitzhöhe 2150 mm · Höhe beim Neigen der EGO-Kabine / OHG 3800 mm · Breite beim Neigen der EGO-Kabine / OHG 3700 mm · Breite über Gabelarme, min. / max. 2700/800 mm · Seitenverschiebung ± bei Breite über Gabeln 557/1585 mm · Min. Arbeitsgangbreite für 90° Stapelung 9550 mm · Wenderadius 5875 mm · Wendekreis innen 550 mm · Betriebsdruck für Hydraulik 22,0 MPa · Hydrauliköltank, Volumen 330l · Kraftstofftank, Füllmenge 375l · AdBlue-Tank, Füllmenge 35l · Kraftstoffsorte des Motors Diesel, 4-Takt · Leistung ISO 3046 / bei Drehzahl 185/220 kW / rpm · Drehmoment ISO 3046 / bei Drehzahl 1160/1200 Nm / rpm · Anzahl Zylinder / Zylinderhubraum 6 / 7700 cm³ · Kraftstoffverbrauch, normale Fahrweise 8-11 l/h · AdBlue-Verbrauch, normale Fahrweise 3-5 % of diesel · Getriebe Typenbezeichnung des Herstellers: Dana TE17000 · Kupplung, Typ Drehmomentwandler · Getriebe, Typ Hydrodynamisches Lastschaltgetriebe · Anzahl der Gänge, vorwärts / rückwärts 3/3 · Generator, Typ / Leistung AC/3080 W · Startbatterie, Spannung / Kapazität 2x12 / 145 V/Ah · Antriebsachse, Hersteller / Typ Kessler D91 / Differential und Nabenvorgelege · Hubgeschwindigkeit Ohne Last (m/s) 0,3 · Hubgeschwindigkeit Bei Nennlast (m/s) 0,32 · Senkgeschwindigkeit Ohne Last (m/s) 0,38 · Senkgeschwindigkeit Bei Nennlast (m/s) 0,38 · Fahrgeschwindigkeit, V/R Ohne Last (km/h) 24/24 · Fahrgeschwindigkeit Bei Nennlast (km/h) 23/23 · Steigfähigkeit, max. Ohne Last (%) 60 · Steigfähigkeit, Mit Nennlast (%) 29 · Steigfähigkeit bei 2 km/h Ohne Last (%) 41 · Steigfähigkeit bei 2 km/h Mit Nennlast (%) 22 · Zugkraft Max. (kN) 173 · Geräuschpegel, innen LpAZ*, EGO-Kabine (dB(A)) 72 · Geräuschpegel, außen LWA (dB(A)) 109 Ledpsy Er S Njfx Ancjaa

Condition: used, Year of construction: 2000, operating hours: 43,000 h, machine/vehicle number: IntNr231372, STAR SA 16-12 CNC sliding headstock lathe, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 43,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 Lodpfx Aney Eh E Secoaa SUB SPINDLE - Maximum bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to prior sale. Technical data and specifications subject to change and correction.

Condition: used, Year of construction: 2002, operating hours: 53,000 h, machine/vehicle number: IntNr231166, STAR CNC sliding headstock lathe SA 12/16, year 2002 CNC control FANUC 18i-T Technical data - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Z-axis travel: 140 mm - Spindle speed: 8000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 Lodpfsy Eh E Eox Ancsaa SUB SPINDLE - Max. bar diameter: 12 mm - Spindle speed: 8000 rpm - Number of tool stations: 4 IEMCA CH220 bar feeder Bar length: 3200 mm High-pressure coolant system Batec fire suppression system Operating manual The machine can be inspected under power by appointment. Technical data and specifications are subject to change and errors, prior sale reserved!

Condition: used, Year of construction: 2004, operating hours: 153,199 h, machine/vehicle number: IntNr231566, For sale is a high-performance DMG Speed 12-7 Linear sliding headstock automatic lathe with FMB Minimag bar feeder. Control: Fanuc 16i-TB with DMG-specific operator interface Year of manufacture: 2004 Technical data Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) Lodpjy Ehdnsfx Ancsaa Maximum bar diameter: 12.7 mm Maximum turning length: 120 mm Rapid traverse rates: X-axis (linear): 40 m/min Linear drive cooling: Separate cooling unit for thermal stabilization of the linear motor. Z-axis: 30 m/min Main spindle speed range: 0 – 12,000 rpm Drive power: 3.7 / 5.5 kW C-axis: 0.001° resolution for high-precision milling operations Counter spindle speed range: 0 – 12,000 rpm Travel (Z2): 150 mm C-axis: full-featured integrated C-axis Tool carrier (linear slide system) Total tool positions: up to 18 stations Driven tools: 3 to 5 positions for cross machining Max. speed of driven tools: 6,000 rpm Bar feeder: FMB Minimag for bar diameters from 2 to 23 mm. Bar length: 3,020 mm Chip conveyor Compact extinguishing system / Kraft und Bauer automatic fire suppression systems Parts separator Chip flushing system The machine can be demonstrated under power by prior appointment. Technical data and details are subject to change and error. Prior sale reserved!

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data Lodpfxoy Ehdbe Ancsaa MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2016, This 4-axis HOMAG PROFI BMG 512/40/12/V/A was manufactured in 2016, featuring a POWEREDGE gluing unit and a 4-fold edge magazine. It includes an 18-fold disc tool-changer, a 12 kW processing spindle, and a C-axis with unlimited swivel range. The machine supports workpiece lengths up to 4000 mm and thicknesses up to 300 mm. Ideal for advanced woodworking, it offers dynamic space allocation for optimal processing area utilization. Contact us for more information about this machine. Additional information Workpiece • Lengths: 4000 mm for single placement / 2250 mm for pendulum placement • Widths: 1450 mm for all units and front stop • Maximum Workpiece Thickness: 300 mm (including clamping devices) • Up to 60 mm with standard clamps without restrictions for units and extraction. Table • Automatic Console Table • Automatically adjustable console table • 8 consoles Y = 1500 mm • 16 side and stop pins 140 mm, electromechanically controlled • Dynamic space allocation for optimal utilization in pendulum operation • Various double vacuum clamps • Without vacuum pump; supplied via a building-side vacuum system Tools • 18-fold disc tool-changer Main Drive • Processing Spindle: 12 kW (S6 operation) / 9.5 kW (S1 operation) • Spindle with hybrid bearings • Frequency-controlled rotation: rpm • Automatic feed reduction with decreasing spindle speed Injection Unit • POWEREDGE Gluing Unit • Gluing unit for 360° edge gluing on butt joints • Glue application via application roller onto edge material • 1 pressure roller Ø 50 mm, 1 follow-up roller Ø 35 mm • Max. edge height: 65 mm • Edge thickness: 0.4 - 3 mm (veneer 0.4 - 2 mm / PVC 1.0 - 2 mm) • Hot air nozzle for heating thick edges on small radii, controllable via NC Machine Control • POWERCONTROL PC 86 POWERTOUCH • With 21.5" Full-HD multitouch display • WoodWOP for graphical, dialog-oriented creation of CNC programs • Diagnostic system WOODSCOUT Additional Equipment • Interface for FLEX 5 unit • C-axis with unit interface • Unlimited swivel range • Coupling element for automatic tool change of FLEX 5 unit • Drilling Head Lsdjx D Nzvjpfx Ancoaa • 21 spindles V17 / H4 / S0 / 90° • 17 vertical drilling spindles with quick-change system • T-shaped arrangement: 7 spindles in Y-direction / 11 spindles in X-direction • 4 horizontal spindles with saw 0 / 90° • Pre-cutting Station • Moves with the processing portal (X-axis) • Saw / Trimming Unit for Tool Changer • Combined trimming and corner rounding unit, sensor-controlled • Combined flush-trim / pull-knife unit Extra Information • Coolant tank for processing spindle • Integrated chip conveyor, discharging to the leftNote: The technical data and descriptions are for informational purposes only and are not binding.

Condition: used, Year of construction: 2014, machine/vehicle number: CA79, Used R&G 12 capsuling machine - 12000 BPHTechnical Specifications & Performance DataThis single-station R&G capsuling machine model Z 12 is engineered for high-speed capsule application in professional wine bottling environments. It combines PVC capsule heat-shrinking with sparkling wine hood folding/smoothing in an interchangeable turret configuration, delivering reliable performance for industrial packaging and beverage production.Production speed: up to 16,000 bph with PVC heat-shrinking; up to 12,000 bph for champagne/sparkling hood smoothingApplication technologies: PVC shrink capsules and sparkling wine capsule folding/smoothingNo. of heads: 12 heat-shrinking heads interchangeable with 12 pneumo-mechanical folding/smoothing headsRotation/infeed direction: left-to-right, clockwiseCapsule magazine capacity: approximately 10,000 piecesBottle handling: designed for glass bottles and standard wine bottling formatsYear of manufacture: 2014Machine type: Single-station capsuling machineModel code: Z 12Advanced Automation & Control SystemsThe Z 12 integrates recipe-driven automation to simplify changeovers and ensure repeatable quality. Automated motions and intelligent sensors support consistent capsule application while reducing operator intervention.Automatic machine height adjustment via recipeUniversal feed screw with automatic adjustment from stored recipesCap/cage detector for no-capsule conditionCapsule presence detector with automatic machine stopInterchangeable turret tooling for rapid switch between PVC shrink and sparkling smoothing operationsProduction Line Integration CapabilitiesBuilt to integrate seamlessly into a used bottling line or as a standalone workstation, this capsuling machine supports efficient material flow and quick adaptation to upstream/downstream equipment in beverage production.Universal infeed/outfeed star-wheels for smooth transferCompatible with standard wine glass bottle geometriesIdeal for integration with corkers, wirehooding units, labelers, and conveyorsRecipe-based adjustments reduce format changeover timeMachine Condition & Maintenance HistoryThis second hand capsuling machine is presented in operational condition and suitable for immediate integration following standard commissioning. Its automated recipe controls and robust turret design support consistent performance in continuous operation.Operational Performance & VersatilityThe Z 12 is designed for wineries and beverage producers seeking dependable capsuling with minimal downtime. Its dual-function turret allows switching between PVC capsule heat-shrinking and sparkling hood folding/smoothing without compromising speed or consistency. Intelligent detection systems safeguard product quality by verifying cap presence and stopping the machine automatically when needed.High-speed PVC shrink capsule application for still winePneum... Ledjy Ef T Hspfx Ancjaa

Condition: used, Year of construction: 2016, machine/vehicle number: GA22, Used R&B RECORD 12 wierhooder 12000 BPHTechnical Specifications & Performance DataThe Wirehooder RECORD 12 with double distributor is a high-efficiency machine engineered for securing wire cages on sparkling wine and similar glass bottles in industrial packaging environments. Designed for continuous operation in a used bottling line or as a standalone station, it delivers reliable, second hand performance for beverage production where consistency and throughput are essential.Model: RECORD 12Maximum speed: 12,000 bphRotation direction: Clockwise, left to rightYear of manufacture: 2016Double distributor: Supports 2-leg and 4-leg wire cagesDual magazines: Approx. 6,000 cages eachContainer handling: Designed for Glass bottle handlingAdvanced Automation & Control SystemsEngineered to reduce changeover time and operator intervention, this wirehooder integrates recipe-driven automation and precise handling features. Automated setup routines ensure consistent application quality while maintaining high throughput.Recipe-based automatic height adjustment: Quick format alignment via stored recipesUniversal infeed screw: Automatic setup with recipe for smooth bottle infeedSensors and interlocks: Cap detection (no cage application if no cap) and cage presence detection with machine stopProduction Line Integration CapabilitiesThe RECORD 12 integrates seamlessly into complete bottling and packaging lines for sparkling products. It can operate inline with upstream capping and downstream labeling or inspection systems, supporting a wide range of bottle diameters and heights typically used in sparkling wine packaging.Inline or standalone operation modesCompatible with upstream corking/capping stations and downstream labeling/inspectionEfficient material flow with left-to-right (clockwise) layoutMulti-format flexibility via recipe-based adjustmentsMachine Condition & Maintenance HistoryThis second hand wirehooder is presented in ready-for-operation condition, reflecting robust build quality and dependable performance for industrial packaging uses. It is suitable for rapid recommissioning within a used bottling line.Operational status: Ready for operationCommercially maintained features with functional automation and detection systemsOperational Performance & VersatilityOptimized for sparkling closures, the double distributor manages both 2-leg and 4-leg cages to cover diverse product SKUs. The dual high-capacity magazines sustain longer runs with fewer refills, supporting continuous beverage production.Wire cage formats: 2-leg and 4-legHigh-capacity dual magazines: Approx. 6,000 cages each for extended autonomyConsistent application quality at high speeds up to 12,000 bphIdeal for integration in sparkling wine bottling lines within industrial packaging operationsInstallation Requirements & Site P... Lasdpfx Anoy Ef Tyjcoa

Condition: good (used), Year of construction: 1999, Ref. -No.: 10638 Manufacturer: TOS HULIN Type: SKA 12 CNC Year of construction: 1999 Type of control: CNC Control: Sinumerik 840 C Storage location: Halberstadt Country of origin: Czech Republic Turning Diameter: 1450 mm Lajdpoy Ed Suefx Ancea Turning Height: 1450 mm Tool Taper: SK50 Power Capacity: 60 kW Planar disk: 630 RPM Planar disk: Ø 1250 mm Head Magazine: 30 academic subject Plate magazine: 24 academic subject Further information: - Hydraulically operated power chuck - Drive for rotary tools - Third controlled C-axis - Heidenhain linear scales in X and Z - Chip conveyor and extraction system - Renishaw for tool control The machine can be viewed under power by arrangement.

Condition: used, machine/vehicle number: 006082, Max. panel width: 1300 mm Lasdpfx Aowaymwjncsa Max. panel length: 3000 mm Rotation system: double cone Rotation direction: from transverse to long

Condition: used, axle configuration: 2 axles, first registration: 08/2000, loading space length: 13,500 mm, loading space width: 2,510 mm, loading space height: 2,550 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 425/65R22,5, wheelbase: 9,110 mm, color: other, Year of construction: 2000, Equipment: ABS, Number of axles: 2, Payload: 24,600 kg, Curb weight: 7,400 kg, Gross weight: 32,000 kg, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, Superstructure year: 2000, Sidewall material: Plywood, Axle type: BPW, Tail lift type: Underfold tail lift, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum = Further Information = General Information Cab: Day Registration number: OG-75-HB Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tyre size: 425/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre profile left: 5 mm; Tyre profile right: 4 mm Axle 2: Tyre profile left: 4 mm; Tyre profile right: 4 mm Weights Unladen weight: 7,400 kg Payload: 24,600 kg Gross vehicle weight: 32,000 kg Functional Loading platform height: 130 cm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large and fast-changing stock • Recognizable quality • Competitive pricing • Professional service • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates quickly arranged • Expert technical services • The assurance of “recognizable quality” • And much more.... Please visit our website for special offers and the complete stock list. Ledsxl Rngepfx Ancsaa Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request on our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2007, operating hours: 560 h, 2007 | Haulotte Compact 12 Dx (12m) | Used Scissor Lift | 560 hours Laodpfx Ansy D Uagocoa 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8200 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 40 inspection points 34 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the Scissor Lift, presence of oxidation on metal parts and damaged paint. Impact on the stabilizer protection housing. The movable floor is slightly deformed. Presence of impact on the guardrail at the access level. Left side tires and rims are damaged. The fiberglass protection covers are damaged with the absence of the stay cylinder to hold the engine cover in the open position, and poor maintenance of the cover cylinder, side, hydraulic group. Slight presence of exhaust smoke. Maintenance of the cable at the high control station with tape. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40719 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.