Used Gefra Wire Eroding Machine for sale (65,813)

Condition: good (used), Year of construction: 2001, Agiecut Challenge 3 Year 2001 XYZ - 500x350x256 UV axis - +-70mm Maximum coveted 30° at 100 mm height Maximum pieces 1050x650x250 Blodpjuanm Iefx Amrsn Maximum weight 400/800 kg Machine dimensions 2800x2400x2220mm Machine weight 4t500kg

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin Bjdozucliopfx Amrjln

Condition: used, Year of construction: 2005, AGIECUT Challenge 2 eCut Year of construction 2005 TECHNICAL DETAILS X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 256 mm U/V axis: ±70 mm Cone angle: 30°/100 mm Cutting rate: > 300 mm²/min Quality: Ra 0.1 µm Thread height: 250 mm Bsdpsua Uzfjfx Amreln Tapping die: 1/2 mm Wire diameter: 0.1 - 0.33 mm Workpiece height: 250 mm Workpiece width: 550 mm Workpiece length : 750 mm Workpiece weight with/without bath: 200 / 450 kg MACHINE DETAILS Bath size : 700 l Dimensions : 2215 x 2215 x 2220 mm Net weight : 3600 kg

Condition: used, Year of construction: 1970, für MK3 weight of the machine ca. 4 t Bledpfx Asztfy Tjmrsn

Condition: good (used), Year of construction: 2006, MACHINE Bsdszr Uuqjpfx Amreln Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Bodpfxoyhb D Ee Amreln

Condition: used, Year of construction: 1998, Control FANUC Series 16-W x-axis 320 mm y-axis 220 mm z-axis 180 mm u-axis 120 mm v-axis 120 mm rapid traverse (x) 900 mm/min rapid traverse (y) 900 mm/min rapid traverse (z) 450 mm/min rapid traverse (u) 450 mm/min rapid traverse (v) 450 mm/min max. workpiece weight 250 kg weight of the machine ca. 1,5 t Bjdszrh N Ujpfx Amroln connected load 11 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 2010, For sale CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking Bledpozrfpxefx Amron 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Condition: used, Year of construction: 1970, für MK3 weight of the machine ca. 4 t Bljdjztfzdspfx Amren

Condition: used, No minimum price – guaranteed sale to the highest bidder! Bljdpfx Ajzy Uk Ijmrjn The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on site for loading. For sale is a wire erosion machine manufactured by AGIE, model: Agietron Integral 3.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES CUT 2000 AWC WIRE EDM MACHINE (DOUBLE HEAD) MANUFACTURED IN 2012 TRAVEL: X 350, Y 250, Z 256, U, V +- 70 MM MAXIMUM TAPER: 30º/100 MM LINEAR GUIDES AUTOMATIC THREADING AND RE-THREADING Bedpfx Amsy Twkasrjln DOUBLE HEAD OPTION TO WORK WITH 0.05 AND 0.07 MM WIRES ACCEPTABLE WIRE RANGE: 0.05 - 0.33 MM AGIEVISION 5 GENERATOR SUPERFINISH MODULE FOR FINISHES UP TO 0.05Ra RE-THREADING HEIGHT: 220 MM COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: excellent (used), Year of construction: 2016, X-axis: 550 mm Y-axis: 350 mm Z-axis: 400 mm Max. workpiece dimensions: 1,200 x 700 x 400 mm Max. workpiece weight: 1,500 kg Bedjzcpifopfx Amrjln Machine weight: 2,850 kg Cutting range: 30 degrees on 400 mm Includes operating manual. Machine can be inspected while powered on.

Condition: used, Year of construction: 2007, table length 500 mm table width 350 mm ampere 65 A Control AGIEVISION 5 CNC total power requirement 20 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Bledet Hxbkspfx Amren Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire 60 – 300 mm/s. Total electrical load, approx. 20 kW - 400 V - 50 Hz Weight, approx. 4,000 kg Dimensions of machine approx. 2.4 x 2.2 x 2.4 m Accessories / Special Features • AGIEVISION 5 CNC Path Control for 5 Axis with OS 2 Machining Version and With various subprogrammes for a easier and faster designing of machining programmes, Technology devices, PP 123 Agie Geometric helps, DNC-Connection,Graficheck in 2 D a. 3 D, Rethreading of wire when wire is cutted-off, Optimizing the programmed pathes, PURECUT for reduction of Oxidation on workpiece surface,10 various program-languages, and many more features. • Mobile electronic hand held control unit for manual adjustments and set-ups for new workpieces, and separate standing control panel with CD-recorder and large monitor. • “DA” PROGRESS integrated Dieelectricum Aggregate with chiller and Filtering System, large tank incorporated in machine’s basement, Koax flushing, • AGIE Generator with 65 A Capacity and cutting performance up to 300/450 mm² • AGIE Automatic Wire Threading System with wire shredder and container mounted in backside of machine. Condition : Very good. The machine comes from a first class tool and die shop. It has been kept in very good order and was regularly maintained. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Bjdpfx Amsza U Nlorjln Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Bodpfxjzuvyaj Amreln Year of manufacture: 2014, available from the end of August.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 396-900-115-0108, workpiece weight (max.): 2,890 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, workpiece height (max.): 250 mm, workpiece width (max.): 900 mm, workpiece length (max.): 680 mm, Ορίστε μια σύντομη, επαγγελματική και περιεκτική περιγραφή που μπορείς να χρησιμοποιήσεις: GF AgieCharmilles CUT 20 P – Wire EDM Machine Well-maintained AgieCharmilles CUT 20 P wire erosion machine in excellent working condition. Features the Performance Package for higher cutting speeds and superior surface finish. Year of Manufacture: 2011 Travels (X / Y / Z): 350 x 250 x 250 mm Max. Workpiece Dimensions: 900 x 680 x 250 mm Bsdpfx Ajzncqlsmrsln Max. Workpiece Weight: 400 kg Features: Automatic Wire Threading (AWT), IPG Generator, integrated dielectric filtration unit. Ready for inspection under power.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000 Oiltech Year of manufacture: 2012 Bljdpeztp Emsfx Amrsn Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-VO generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm including option KIT 70 Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER hand box for comfortable setup VISION 5 control 15" LCD color screen, jog control panel and mouse Includes AGIESETUP 3D Includes Fast-Threading option Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. A customized test cut is also possible. We also offer commissioning and on-site training for this machine.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 24,731 h, functionality: fully functional, machine/vehicle number: W120273, Wire EDM machine Makino DUO43 Year of manufacture: 2011 Travel ranges (X/Y/Z): 450 x 300 x 320 mm Bljdpfxjzudqys Amron Travel ranges (U/V): +/- 101 mm Max. workpiece dimensions: 710 x 560 x 300 mm Max. workpiece weight: 800 kg Available wire diameters: from 0.10 to 0.30 mm Max. spool weight: 16 kg The machine was recently in operation at our customer's site and can be inspected while powered on.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: J20M0260A, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 350 mm Travel range Z-axis: 300 mm Travel range U/V: ±60 mm Workpiece size: max. 1,050 × 800 × 295 mm Workpiece weight: max. 1,500 kg Available wire diameters: 0.10–0.30 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 2,200 × 2,500 × 2,150 mm Machine weight: 3,700 kg EQUIPMENT Blsdpfszu N Abox Amrsn Automatic wire threading

Condition: used, Year of construction: 1998, Sodick AM 35 CNC EDM Machine Model: AM 35 Year: 1998 Control: Neuro Fuzzy II 40: ‘X’ axis Travel: 350mm ‘Y’ axis Travel: 250mm ‘Z’ axis Travel: 250mm Tank Dimensions: W 790 x D 590 x H 320mm Blsdpfx Aowqgh Aomrsn Max. electrode weight: 50 kg Max. Table Load: 550 kg With: Magnetic chuck 350 x 250mm

Condition: refurbished (used), Year of construction: 2017, operating hours: 3,751 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, feed length Y-axis: 3,300 mm, GF CUT200SP, year 2017. Machine available at our Semsales premises in April. The machine will be fully cleaned and serviced. 0.1 mm option. Wire chopper. Blodpfx Amsyk Upajron

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Equipment: fridge, AGIECHARMILLES CUT 30 WIRE EDM MACHINE, YEAR OF MANUFACTURE 2011 TRAVEL: X 600, Y 400, Z 350, U/V ±50 MM MAXIMUM TAPER: 25°/80 MM AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT: 350 MM WIRE SPOOLS UP TO 25 KG Bledoy Tw Tbopfx Amron WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS COOLING UNIT TEST CUT POSSIBILITY

Condition: good (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 240 SL Year of manufacture: 2004 Travel ranges (X / Y / Z): 350 x 220 x 220 mm Travel ranges (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Blodpfx Ajzwv S Ijmron Cutting speed of 300 mm²/min Best surface finish: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete system: 2020 x 2050 x 2000 mm Total weight of the system: 2450 kg The machine is currently in use at our customer's site and will be available from September. We would be pleased to offer the following services: - Cleaning and overhaul of the machine - Commissioning and training - Delivery - Clamping devices - Cooling unit - Transport

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, AGIECHARMILLES CUT 200 MS WIRE EDM MACHINE, YEAR OF MANUFACTURE 2015 MS MACHINE (TEMPERATURE-CONTROLLED) FIXED TABLE TRAVELS X 350 Y 250 Z 220 U 350 V 250 MM MAXIMUM TAPER 30°/220 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 220 MM WIRE SPOOLS UP TO 8 KG Bjdpfxsy Twf Ro Amreln RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, total height: 2,600 mm, total length: 1,940 mm, total width: 2,300 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, overall weight: 3,460 kg, GF AgieCharmilles Classic V3 Year of manufacture: 2008 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in the bath) / 800 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER hand box for convenient setup AGIE IPG-V generator AGIEVISION 5 control Bodszwl R Hspfx Amrsln Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned, overhauled, and tested at our facility after receipt of your order. We would be happy to perform a customized test cut for you. You will receive a warranty of 6 months on all machine parts. We would also be happy to offer commissioning and training.