Used Fliegl Sds 380 Kippchassis Vario Kipp 20/30 for sale (51,846)

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 4,060 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,060 mm, suspension: air, tire size: 435/50R19,5, tire condition: 100 %, Additional information Chassis, semi-trailer, transport company Fine-grained steel welded construction, with preload for slight tension in the neck area, kingpin plate with interchangeable 2 kingpins X-tra Long, with an internal length of 15030 mm Outer frame slightly angled, new design with Load-Lock profile for attaching lashing straps 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm Nodpji Riwuofx Ad Sswh Retractable ladder at the rear Door lock on the side 2 chocks with holder Aluminum side impact protection Galvanized steel under-ride protection Partial wheel arches in front of the 1st axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system AAC Basic, automatic lift axle acting on the last axle, as an aid for maneuvering, up to 20 km/h, can be manually switched off Axle load detection via EBS-Canbus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels & Tires 435/50R19.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal, flashing Side marker lights 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Sieved plywood, approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / Corner posts at the front 2580 mm high, corner posts steel in full volume design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at approx. 140 mm height with steel impact protection Center posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insert pockets & at the bottom with a long pocket. 3 pairs of post positions Insert slats 5 rows of wooden slats Rear wall / Corner posts at the rear Corner posts at the rear steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal swivel latch locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Sliding roof, rear end lift that can be folded up, with roof that can be slid from back to front, L-roof beam for the automotive industry, interior width between the roof beams approx. 2490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof beam during loading and unloading EcoLift - liftable roof by approx. 380 mm, on both sides, with gas spring support, 3 driving positions at the front: Interior height at the front set to approx. 3000 mm Optimal rain gutter at the rear, at the top of the end ra

Condition: used, axle configuration: 3 axles, first registration: 05/2024, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,010 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2024, Equipment: ABS, = Additional Options and Accessories = - EBS - Sliding roof = Notes = Number of axles: 3, Tare weight: 5905 kg, Gross vehicle weight: 39000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2024, Sliding roof, Axle type: SAF = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread left: 12 mm; Tire tread right: 11 mm Axle 2: Tire tread left: 12 mm; Tire tread right: 12 mm Axle 3: Tire tread left: 12 mm; Tire tread right: 11 mm Njdeyupdyspfx Ad Sjwh Weights Unladen weight: 5,905 kg Payload: 33,095 kg GVW: 39,000 kg Functional Sliding roof: Yes Environmental Emission class: Euro 0 Condition Overall condition: very poor Technical condition: very poor Optical condition: very poor Damage: none Financial Information Leasing price: 373 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, overall weight: 39,000 kg, first registration: 08/2021, next inspection (TÜV): 10/2025, loading space length: 9,500 mm, loading space width: 2,450 mm, loading space height: 2,150 mm, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, Fliegl Aluminum Tipping Semi-Trailer - 48 cbm - Lift axle - SAF axle - Swing doors - LED work lights Njdpfxexcr H Ee Ad Sowh - Next technical inspection due: 10/2025 - Safety inspection due: 04/2026 Subject to errors and prior sale. Internal vehicle number: 11351. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us via WhatsApp.

Condition: used, axle configuration: 3 axles, first registration: 03/2011, total length: 12,100 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 9,250 mm, color: other, Year of construction: 2011, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Payload: 36,200 kg, Tare weight: 5,800 kg, Gross vehicle weight: 42,000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Air suspension, EBS, 2X 20, 1X 30, 1X 40 FT HIGHCUBE // DISC BRAKES // LIFT AXLE = Further Information = General Information Cab: Day cab Registration number: OL-43-HP Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Lift axle; Tire tread depth left: 5 mm; Tire tread depth right: 10 mm Axle 2: Tire size: 385/55R22.5; Tire tread depth left: 8 mm; Tire tread depth right: 10 mm Axle 3: Tire size: 385/65R22.5; Tire tread depth left: 2 mm; Tire tread depth right: 2 mm Weights Unladen weight: 5,800 kg Payload: 36,200 kg Nsdpfoy U U R Hex Ad Sowh GVW: 42,000 kg Environment Emission class: Euro 0 Condition Overall condition: very poor Technical condition: very poor Optical condition: very poor Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT34202038273, empty load weight: 5,680 kg, maximum load weight: 29,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 2,680 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: silver, Chassis, semi-trailer, logistics company Fine-grained steel welded construction in reinforced Scandic design, kingpin plate with replaceable 2" kingpin Outer frame in low-bed design: 7 pairs of lashing points embedded in the top and side of the outer frame, each with a capacity of 10 tons 10 pairs of combination pocket lashing points with ring lashing eyes (bolted) embedded in the outer frame, each with a capacity of 5 tons, approx. 72 x 42 mm internal dimensions Outer frame with "Load-Lock profile" for securing lashing straps, with a hole approximately every 400 mm 24 ton, 2-speed landing gear, single-side operation Free swivel radius to the support foot approx. 2500 mm, support foot dimension approx. 2600 mm, extendable ladder at the rear 2 chock blocks with holder Aluminum side impact protection Steel under-run protection, galvanized Spray guard at the rear, covering the entire width Quarter panel fenders in front of and behind the axle assembly with anti-spray splash guards, only on the last axle 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable in front of the axles, 1x on the left and 1x on the right 1 storage box across the entire width, closed, below the loading area, approx. w=450 mm/h=400 mm/d=2460 mm mounted directly in front of the axles 3 lashing/stanchion rails with 4 pairs of locking cutouts embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 1782 mm), approx. 80 mm high. With cutouts at the top and bottom for lashing and inserting stanchions 80 x 80 mm. At the bottom, an angled sheet is used as a stop, open to halfway down. Combined design for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters 10 combination stanchions with cutouts at the bottom, w=80/ d=50/ l=1200 mm 6 stanchions, w=80/ d=80/ l=1200 mm, hot-dip galvanized Axles + suspension BPW disc brake axles with 430 mm disc diameter Air suspension 1st axle automatic lift axle, additionally electrically operated from the truck, including forced lowering and starting assistance Braking system 2-line pneumatic braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front 24 Volt EBS, electronic brake system with EBS socket at the front Nwsdpfxjzbbpuj Ad Seh Caution: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab Wheels and tires 385/65 R22.5" Steel rims "TPMS" tire pressure monitoring system according to ECE R 141, display via the display in the towing vehicle, via EBS Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side yellow LED lighting on the side, linked to the turn signal "flashing side marker lights" 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front 2 additional LED work lights at the rear 1 LED roof marker light with holder 2 pairs of warning signs, LED illuminated and extendable to 3,000 mm 2 additional LED work lights at the top of the front panel additional 7-pin socket in the under-run protection at the rear Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 7,900 kg "Premium floor sealing" Floor sealed around the entire perimeter F

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT34202034509, empty load weight: 4,790 kg, maximum load weight: 33,210 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, total height: 1,150 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: red, 3-Axle Container Gooseneck Semi-Trailer Type SDS 420 Rigid 40" Chassis: Semi-trailer chassis Fine-grained steel welded construction, kingpin plate with interchangeable 2" kingpin and 2 kingpin positions Container receptacles: 1 x 20 ft in the center, without steel/diamond plate flooring in the rear area 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Front crossbeam with folding locks (not available with front extension), provided free of charge The transport of filled tank containers is excluded. Without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part, for load equalization, manufacturer: Jost 2 chock blocks with holders Side underrun protection Rear underrun protection Semi-shell fenders With anti-spray flaps according to EC Rear impact protection Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing 1310/1410 mm Air suspension Nodszazznepfx Ad Sjwh Braking system 2-line compressed air braking system Color-coded line routing for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! With raise and lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab; the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5" manufacturer Fulda with M+S marking Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable 2 additional LED work lights, at the rear on both sides, switched via reversing light Operating instructions Note: Transport of filled tank containers is excluded! Country of registration/Signs Germany With Dekra approval and certificate (according to §13 EC - FGV) Prepared for single-row license plate holder Warning sign according to ECE - 70 ADR warning sign at the rear, foldable Contour marking with reflective strips according to ECE R 048, yellow on the sides and red at the rear Paint Frame RAL 3020 traffic red "10-year warranty against rust-through" Landing gear black coated

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/1996, total length: 10,250 mm, total width: 2,500 mm, wheelbase: 8,630 mm, color: other, Year of construction: 1996, Make axles: BPW Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 4.110 kg Nwodsy Nlf Dspfx Ad Ssh Carrying capacity: 34.890 kg GVW: 39.000 kg Registration number: ON-35-DX

Condition: used, axle configuration: 3 axles, first registration: 09/2011, color: other, Year of construction: 2011, Empty weight: 5.100 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm Nsdpfxoxqfyhj Ad Sewh We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 10/2005, color: other, Year of construction: 2005, Empty weight: 3.750 kg Axle 1: left 12 mm right 7 mm Axle 2: left 4 mm right 6 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers! Nsdpfx Adoucxu Io Sowh

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34202036640, empty load weight: 6,213 kg, maximum load weight: 35,787 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. ## Fliegl Thermo Semi-Tipper Trailer ### Chassis – Semi-Tipper Light Construction * Lightweight high-strength chassis construction * Fifth wheel plate with replaceable 2” king pin * Patented curved front end design ### Axles & Suspension * SAF disc brake axles with 430 mm brake discs * Laser-aligned axles and running gear for reduced tyre wear and improved fuel efficiency * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid ### Braking System * 24 V EBS electronic braking system with front EBS socket (without connecting cable) * External brake cylinder pressure test connection at EBS module * Raise-and-lower valve integrated * Trailer brake system electronically controlled via truck (no truck-side installation required) * Automatic tipping lowering function with shut-off valve * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via towing vehicle EBS system (truck preparation required, basic tyre equipment only) * Axle load detection via EBS CAN bus signal for display in the driver’s cabin (truck must be pre-equipped; no additional truck installation required) ### Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims ### Electrical System * LED side marker lights linked to indicators (flashing side lights) * 2 white LED front position lights * 2 white/red LED rear outline marker lights * LED work lights on both sides * 2 additional integrated LED rear work lights ### Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * Hard-chrome plated first stage piston rod * HDK screw coupling, fixed section, NW 48 mm * Without hose connection * Hydraulic operation via truck PTO (power take-off) ### Tipping Body – Thermo Asphalt Body * Steel round-body design in “Stone Master” specification made of high wear-resistant HB 400/450 steel * Sloped front wall with external hydraulic cylinder mounting * Internal ladder access at front wall * Aerodynamic “Greenline” tapered body design * “Membrane” tailgate with hydraulic rear door, large opening upwards, approx. 2,200 mm clearance height * Side walls: 5 mm continuous steel * Floor: 8 mm continuous steel * Fully insulated body (Fliegl Asphalt Profi Thermo system) * Insulation on front, sides, bottom and rear ### Cover System * “Flip Top” sliding tarpaulin system * Automatic rear closing as folding bow system Nwjdpfjyylapox Ad Sjh * Tarpaulin moves forward to the front * Electrically driven system * 7-pin front power socket (charging plug), no connecting cable included * No truck-side installation required * Operation via trailer control panel and remote control ### Operating Notes * For transporting salt, lime, and similar aggressive materials, a hydraulic cylinder with hard-chrome plated piston rod is recommended to prevent corrosion and wear * The stated total weight is technically possible; depending on payload distribution, the maximum permissible axle, drawbar, and fifth wheel loads may limit achievable payload * Incorrect load distribution may negatively affect driving stability and trailer tracking behaviour ### Paint Finish * Chassis: DB 7350 Nova Grey * 10-year anti-corrosion warranty against perforation rust * Landing gear: black coated * Tipping body: RAL 1007 daffodil yellow * Sliding tarpaulin: RAL 7038 agate grey

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Njdpey Rnr Aefx Ad Sowh Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: used, first registration: 09/2016, color: other, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - BPW-Assen - Drum brakes - Lift Axle Nedpfx Ajy Avafsd Sjwh = Remarks = Fliegl, 2016, BPW axles, Axle 1 Liftable, Drum brakes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, empty load weight: 12,200 kg, maximum load weight: 26,800 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 09/2024, suspension: air, tire size: 235/75 17,5, tire condition: 80 %, color: black, Year of construction: 2024, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 41370 Fliegl, SDS 480 * Year of manufacture: 2024 * ABS, Anti-lock Braking System * Air suspension * Tarpaulin, neutral color * Used tarpaulin * Edscha/sliding roof cover * Retractable lashing eyes * Mechanically operated roof panel * Trailing steering axle * Air connection, coupling head (red + yellow) * Connector plug, 2x7-pin * Connector plug, 15-pin * Lifting and lowering device * Storage box/toolbox * Rear support * Hydraulic ramp Nwodpfx Adjzhfu Ts Ssh * Suspension: Air * Gross vehicle weight: 39,000 kg * Tare weight: 12,200 kg * Payload: 26,800 kg * Permissible gross vehicle weight: 39,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 80% - 80% - Tire size: 235/75 R17.5 * Tire condition, 2nd axle: 80% - 80% - Tire size: 235/75 R17.5 * Tire condition, 3rd axle: 80% - 80% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Hydraulic loading ramp * Remote control for loading ramp * Trailing steering axle Disclaimer: Subject to change, prior sale, and errors excepted. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates/customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists, we will be happy to advise you.

Condition: used, empty load weight: 12,200 kg, maximum load weight: 26,800 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 09/2024, suspension: air, tire size: 235/75 17,5, tire condition: 80 %, color: black, Year of construction: 2024, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 413701 Fliegl, SDS 480 * Year of manufacture: 2024 * ABS, Anti-lock Braking System * Air suspension * Plain tarpaulin * Used tarpaulin * Edscha / Sliding roof cover * Retractable lashing eyes * Mechanical liftable roof * Trailing steering axle * Air connection coupling head (red + yellow) * Connection plug 2x7-pin * Connection plug 15-pin * Lifting and lowering device * Storage box / toolbox * Rear support * Hydraulic ramp * Suspension: Air * Total weight: 39,000 kg * Tare weight: 12,200 kg * Payload: 26,800 kg * Permissible total weight: 39,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 80% -- 80% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 80% -- 80% - Tire size: 235/75 R17.5 * Tire condition 3rd axle: 80% -- 80% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Hydraulic loading ramp * Remote control for loading ramp * Trailing steering axle Disclaimer: Subject to changes, prior sale and errors. More pictures and videos can be found on our website. Our extensive service includes: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. Nwodpfx Adjzhfvdo Ssh * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists, we will be happy to advise you.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902029968, empty load weight: 6,100 kg, maximum load weight: 28,900 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, The pictures are archive pictures, the vehicle may still be in use! Equipment on request! Nsdpfx Adjwk Dcks Sswh

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902026582, empty load weight: 6,500 kg, maximum load weight: 28,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 445/45 r19,5, tire condition: 100 %, Further information The images are archive photos, the vehicle may still be in operation! Chassis - Semi-Trailer for Freight Forwarding Fine-grain steel welded construction, with preload (slight tension) in the neck area, fifth wheel plate with interchangeable 2'' kingpin PRO SLIDE, additional sliding plate at the front to protect during coupling Outer frame slightly angled with load-lock profile for attaching lashing straps Note: To hook in the straps in conjunction with sideboards, the sideboards must be opened! 24 t two-speed landing gear, single-side operation, with semi-circular lower part and straight mounting plate, with push compensation Note: Free landing gear foot spacing or free rear swing radius approximately 1930 mm 1 pair rear gearbox landing feet, with straight lower part and single-sided operation on the right in direction of travel Telescoping ladder at the rear Side door retainers Wheel chocks with holders Aluminium side impact protection Galvanized steel underrun protection Quarter-shell mudguards in front of the first axle and behind each axle With anti-spray mud flaps behind each axle Heavy Blocker rear cross underrun protection + side roller bumpers Heavy-duty pallet stops, bolted on both sides, approx. 15-20 mm high, with lashing points every 200 mm, loading height reduced by approx. 15-20 mm Plastic toolbox with drawer and shelf, dimensions: width 650 mm / height 520 mm / depth 670 mm, lockable with padlock (padlock not included) Storage compartment for 16 plug-in slats, on left side in direction of travel, under load area Axles & Suspension BPW disc brake axles with 370 mm disc diameter Axle/chassis laser alignment reduces tire wear and fuel consumption Air suspension Rear loading height raised approx. 1200 mm (truck air suspension lowered to approx. 910 mm coupling height) No lift axle Brake System 2-line air brake system Color-coded piping for easier service Spring-loaded parking brake Duomatic connector at the front, without connecting line EBS (manufacturer: Wabco-E), Electronic Brake System with EBS socket at front, without connection cable Caution: The trailer may only be towed by vehicles that ensure effective ABS operation! With raise & lower valve + auto-reset function Vehicle driving stability system Ramp approach aid: Wabco TailGUARD with 3 ultrasonic sensors at the rear Electrics 24 volt, multi-chamber lights, yellow LED side marker lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin protected sockets at the front, without connection cable Reversing camera system with color flat-screen monitor, with wireless connection to screen, screen with suction cup mount and 24V vehicle power supply Floor Phenolic resin film-coated plywood floor approx. 30 mm thick, with longitudinal stringers for high point load capacity, suitable for forklift axle load up to max. 7100 kg Rear area with heavy duty floor, approx. 1800 mm length Rear area fitted with steel/chequer plate covering approx. 300 mm length (slightly protruding) Front wall / corner stanchions Njdpfx Ajqhiyxjd Sswh 2,580 mm high, steel volume-design corner stanchions, release mechanism for side curtain at front wall Crash Blocker: inside lower section, approx. 140 mm high with steel impact protection Middle stanchions 3 pairs of sliding stanchions, adjustable along full length, with four-fold plug-in pockets and long lower pocket 3 pairs of stanchion positions Plug-in slats Wooden plug-in slats Additional row of al

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33502014693, empty load weight: 6,300 kg, maximum load weight: 28,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r19,5, tire condition: 100 %, Further information: Fine-grained steel welded construction, drawbar with 2 replaceable kingpins, 14 pairs of lashing eyes recessed in the outer frame, each with a capacity of 2.5 tons, outer frame with Load-Lock profile for attaching lashing straps. Note: Not suitable for use with sideboards! 24-ton, two-stage support winch, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation. 2-stage extension ladder at the rear, door retainer on the side, chocks with holder, aluminum side impact protection, galvanized steel underrun protection, partial wheel arches in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, rear impact protection, spare wheel holder for 1 spare wheel, with wheel fastening kit, plastic toolbox. SAF disc brake axles, air suspension. 2-line compressed air braking system, spring brake parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable. Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve, vehicle stability system, tire pressure monitoring system TPMS Haldex, in conjunction with the info center. 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole tamper-proof sockets at the front, without connecting cable, LED safelight, at the top in corner posts at the rear. Nwodpokyrlzjfx Ad Soh Floor: Sieve-printed panels approx. 30 mm thick, cross members with omega inserts, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg. Front wall/corner posts at the front: 2,600 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side rails: 5 pieces of sliding rails that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket (3 x on the right side and 2 x on the left side), 5 pieces of rail positions (3 x on the right side and 2 x on the left side), aluminum insertion strips. Corner posts at the rear: steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-wing with 2 internal rotary latch locks each. Tarpaulin with welded-in horizontal and vertical straps, reinforcements for side rails. Quick Lock system for side tarpaulin with central lock, on one side on the left, tensioning devices made of stainless steel on the right, tarpaulin with recessed vertical slats as a load securing tarpaulin, on one side on the left (then only 2 pairs of side rails on the left). Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with the tarpaulin sliding from the back to the front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, liftable roof, mechanically liftable by approx. 380 mm, liftable roof for opening with the doors closed. Country of registration: Germany, type approval according to EG 2007/46, load securing certificate according to EN 12642 XL, 24/7 service hotline, prepared for single-line license plate holder, warning sign according to ECE - 70, refl

Condition: used, machine/vehicle number: WFDFLT33502019721, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/55 r19,5, Fine-grain steel welded construction, kingpin assembly with two replaceable kingpins. Note: With a frame neck height of 30 mm, the truck wheelbase must not exceed 3700 mm! Outer frame slightly angled with load-lock profile for attaching lashing straps. Note: To attach the straps in conjunction with side walls, the side walls must be opened! Not in the neck area! 10 pairs of lashing eyes recessed into the outer frame, each with a capacity of 2.5 tons. Outer frame with load-lock profile for attaching lashing straps. Note: Not usable with side walls! 24 tons. Two-stage support jacks, single-sided operation, with a straight lower section, without thrust compensation, folding supports at the front, extending outwards and folding downwards in front of the front wall. Retracted as far as possible inwards in the driving position (for uncoupling under load), without supports, extension ladder at the rear, door lock on the side, shims with holder, aluminum side impact protection, galvanized steel underrun protection, quarter panel fenders in front of the first axle and behind each axle, with anti-splash flaps behind each axle, rear impact protection. Heavy-duty rear impact protection beam, pallet stop in heavy-duty design on both sides, approximately 20-25 mm high, with lashing capability every 200 mm, loading height reduced by approximately 20-25 mm, plastic tool box. SAF disc brake axles, air suspension, without lift axle. Two-line compressed air brake system, spring brake parking brake, 2 non-interchangeable coupling heads at the front, without connection line, EBS, electronic braking system with EBS socket at the front, without connection cable. Attention: The trailer may only be pulled by tractor units which ensure the effectiveness of the ABS! With raise and lower valve, vehicle - driving stability system. Nedpfjkyrlwex Ad Sowh 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front. 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connection cable. Floor: Front area with steel floor and anti-slip coating, plywood panels approximately 30 mm thick, crossbars with omega insert, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg, in the wheel area steel/diamond plate covering. Front wall/corner posts: 2,580 mm high, corner posts made of steel in volume design, release mechanism for side tarpaulin on front wall, at the bottom inside at approximately 140 mm height with steel impact protection. Center posts: 3 pairs of sliding posts, slidable over the entire length, with 4-fold insertion pockets and a long pocket at the bottom, 3 pairs of post positions, aluminum insertion slats. Rear corner posts made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel rod locks each. Tarpaulin with welded-in horizontal and vertical straps, tensioning buckles made of stainless steel, customer lettering on rear portal. Roof: Sliding tarpaulin, rear end lift that folds up, with the tarpaulin slidable from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approximately 2,490 mm, tarpaulin color: white, EcoLift - liftable roof, can be raised by approximately 380 mm, with gas spring support, anti-ice system, with one hose in the center, with automatic ventilation.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r22.5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction in lightweight design, extending to the support legs; kingpin plate with 2 replaceable kingpins Lateral floor preparation for lashing eyes 24-ton, two-speed support legs, single-sided operation, with straight lower part, without shock absorption Extendable ladder at the rear Door latch on the side 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps; foldable mudguard for lighting unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with holder 1 plastic toolbox, with drawer and insert, b=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking system 2-line compressed air braking system; color-coded lines for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable With raise and lower valve Vehicle - Driving stability system Wheels and tires 385/55 R22.5, according to manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Sliding floor hydraulics Hydraulic cylinder with sliding mechanism installed in the floor; 2-circuit hydraulic system Nodpfx Asi Riywed Sowh Switching between forward/backward movement electrically via remote control with cable - Sliding floor power supply via parking lights Actuation hydraulically via truck PTO Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump output: Flow rate: 110 l/min Pressure: 250 bar Minimum oil tank filling: 100 l Sliding floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design Tipping body Aluminum tipping body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded together at the top all around with a wide special reinforcement profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom with rail cleaner Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 pieces of externally mounted swivel bolts, locked at the top and bottom. Rear wall with mechanical safety locking, operation at the rear on the driver's side. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platform with access ladder on both sides in driving direction left/right and railing, for opening

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Fine-grained steel welded construction in lightweight design, up to the support legs, drawbar with interchangeable 2 kingpin Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps, foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with bracket 1 plastic toolbox, with drawer and insert, w=650/h=520/d=670 mm, can be locked with a padlock 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering & starting assist, actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Nwedpfoi Riwxox Ad Sjh Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system. Switching between forward/reverse operation is done electrically via remote control with cable. -Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design SBS Tipper Body Aluminum box tipper body, front and side walls made of aluminum hollow profiles, welded around the top with a wide special reinforcement profile made of aluminum, and welded with a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 externally mounted swivel locking rods, locked at the top & bottom. Rear wall with mechanical safety locking, operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platfor

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 29,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, tire size: 385/65 r22.5, tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Nsdpfx Aei Ri R Ded Sjwh Further Information Chassis Fine-grain steel welded construction, drawbar with interchangeable 2 kingpin Vario stake system 4 pairs recessed in the loading area, can be pushed together to 2,100 mm and extended to approx. 3,500 mm for loading. Stakes can be locked every 100 mm on an inner width of 2,100 mm to 3,000 mm, 4 pairs of divisible stakes 600 mm + 1,200 mm, total height 1,800 mm removable. With a stake inner width of approx. 2,350 mm or more, there is an overwidth. Vario end walls Floor prepared for attaching 3 end walls. 4 x 5 pairs of Vario stake pockets for attachable end walls and 1 x 3 pairs in the middle for transporting construction steel mats of 2 x 5,000 mm or 2 x 6,000 mm. 2 Vario end walls, each consisting of 1 pair of plug-in stakes and 1 crossbar at the top, approx. 2,200 mm wide. Crossbar can be extended by 220 mm on both sides, with lashing eye for securing. Height of Vario end wall approx. 1,900 mm, can be converted to a height of 1,300 mm or 700 mm. 4 stake pockets recessed in the middle of the floor for 80 x 80 mm plug-in stakes 1 pair of supports at the bottom for Vario end wall at the front 1 pair of supports at the bottom for Vario end wall at the rear Outer frame slightly angled with Load-Lock profile for attaching lashing straps 14 pairs of lashing eyes additionally recessed in the outer frame, each 5 tons 24 tons, 2-speed winch, single-side operation, with straight lower part, without stroke compensation Extension ladder at the rear Aluminum side impact protection Steel underrun protection, galvanized Quarter fender in front of and behind the axle assembly with anti-splash flaps only on the last axle Rear impact protection 8 steel winches with wire rope and swivel hook, 4 on the left and 4 on the right with rope guide through the outer frame, 1 removable attachment gearbox for steel winch - supplied loose Spare wheel holder for 1 wheel, with wheel fastening kit 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. 1 closed stake storage box, open at the top, under the loading area, doors on both sides, w=450 mm/H=400/420 mm/d=2460 mm 4 lashing/stake rails crosswise recessed in the floor across the entire width up to the outer frame (max. usable inner width between the outer plug-in stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, at the top and bottom, distance from top to bottom approx. 60 mm. At the bottom with an angle plate as a closure, half open downwards. For lashing and inserting 80 x 80 mm stakes. Wrap-around Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured, reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated 3x brakes (start assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended driving height, therefore no guarantee for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,100 kg, maximum load weight: 28,900 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 1,060 mm, suspension: air, tire size: 435/50 r19.5, tire condition: 100 %, Additional information: Fine-grain steel welded construction, + Preload with light pretension in the neck area, turntable + with interchangeable 2 kingpins, outer frame slightly inclined, new design with Load-Lock profile for securing lashing straps, 24 tons, 2-speed support winch, single-sided operation, with straight lower section, without lateral thrust compensation. Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm, extension ladder at the rear, door latch on the side, 2 support wedges with holder, side impact protection made of aluminum, under-run protection made of galvanized steel, quarter fender in front of the 1st axle and behind each axle, with anti-splash flaps according to EC, rear impact protection. SAF disc brake axles, axle/chassis laser-aligned to reduce tire wear and fuel consumption, air suspension. 2-line compressed air brake system, color-coded lines for easy servicing, spring brake parking brake, 2 non-interchangeable coupling heads at the front, without connecting line, EBS, electronic brake system with EBS socket at the front, without connecting cable. Caution: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve, vehicle stability system. 435/50R19.5, manufacturer's choice, steel rims, factory silver. 24 volts, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front, 2 white/red side marker lights at the rear, 2 x 7-pole non-interchangeable sockets at the front, without connecting cable. Floor: Sieve-printed panels approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle loads up to max. 7100 kg. Front wall/corner posts at the front: 2580 mm high, corner posts made of steel in a volumetric design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at a height of approx. 140 mm with steel impact protection. Center posts: 3 pairs of sliding posts that can be moved along the entire length, with 4-fold pockets and a long pocket at the bottom, 3 pairs of post positions. Nwsdji Ri E Hjpfx Ad Soh Sliding slats: 5 rows of wooden slats. Rear wall/corner posts at the rear: Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel locking mechanisms each. Tarpaulin: Tarpaulin with welded horizontal and vertical straps, tensioning buckles made of stainless steel. Roof: Sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof rail for the automotive industry, internal width between the roof rails, approx. 2,490 mm, tarpaulin color: white, 400 roof non-elastic, minimal deflection of the roof rail during loading and unloading, optimal rain deflector at the rear, at the top of the end rail, above the doors, EcoLift - lifting roof can be raised by approx. 380 mm with gas spring support, 3 driving positions at the front: internal height at the front approx. 2900mm/2950 mm/3000 mm, set to approx. 3000 mm. Germany, test approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer certificate for superstructure strength according to EN 12642 XL, prepared for single-row license plate holder, warning sign according to ECE - 70, reflective strips: white, continuously on the lower part of the side tarpaulin and at the top in the corn

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 28,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,045 mm, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, slightly sloping outer frame, new design with Load-Lock profile for securing lashing straps, 24-ton capacity, two-stage landing gear, single-side operation, with straight lower section, without horizontal load compensation. Note: Free support leg swivel angle or free swivel radius to the rear approx. 1930 mm, extension ladder at the rear, door lock on the side, 2 wheel chocks with holder, Aluminum side impact protection, galvanized steel under-run protection, quarter panel fenders in front of and behind the axle assembly, with anti-splash flaps according to EG standard, rear impact protection. SAF disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension. Two-line compressed air brake system, color-coded lines for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic brake system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve, vehicle – driving stability system. 385/65R22.5, manufacturer's choice, steel rims, factory silver. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 2 x 7-pole tamper-proof sockets at the front, without connecting cable. Floor: Sieve-printed panels approx. 30 mm thick, mounted on longitudinal supports for high point load capacity for forklift axle loads up to a maximum of 7100 kg. Front wall/corner posts at the front: 2580 mm high, corner posts made of steel in a full-volume design, release device for side tarpaulin on the front wall, crash barrier, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side supports: 3 pairs of sliding supports that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket, 3 pairs of support positions. Insertion slats: 5 rows of wooden insertion slats. Rear wall/corner posts at the rear: Corner posts made of steel at the rear up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel latch locks each. Tarpaulin: Tarpaulin with welded horizontal and vertical straps, tensioning closures made of stainless steel. Roof: Sliding roof, rear lift that can be folded up, with the roof that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams, approx. 2490 mm, tarpaulin color: white, 400 Roof non-elastic, minimal deflection of the roof beam during loading and unloading, optimal rain strip at the rear, at the top of the rear crossbar, above the doors. Nedpfx Adsi Riy Tj Sowh Germany, test approval according to EG 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural integrity according to EN 12642 XL, prepared for single-row license plate holder, warning sign according to ECE - 70, reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the co

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 35,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. More information Fine-grained steel welded construction in lightweight design, fifth wheel plate with 2 replaceable kingpins, only 2 longitudinal beams as double T-beams for subsequent front drawbar coupling in new/current design, outer frame slightly angled with Load-Lock profile for securing lashing straps. Note: to attach the straps in conjunction with the sideboards, the sideboards must be opened!, 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation, shims with holder, aluminum side impact protection, foldable, steel under-run protection, galvanized, extendable, half-shell mudguards!!Supplied loose, not mounted!!, with anti-splash flaps behind each axle, 1 plastic water tank, capacity approx. 30 liters, on the left side in the front BPW disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, additionally manually lowerable, operable with a hand knob on the vehicle 2-line pneumatic brake system, with 1 central standard air reservoir, spring brake parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, EBS 2S/2M, test connection for brake cylinder pressure on the EBS module routed to the outside, attention: the trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS!, with lifting and lowering valve, control unit + brake integrated into the frame as in a semi-trailer tipper, mounted in front of the axles Brake pad wear indicator on disc brakes via ABS/EBS indicator light on the truck Njdei Riwqepfx Ad Sowh 385/65 R22.5, Continental brand, steel rims, factory silver 24 Volt, multi-chamber lights, yellow LED lighting on the side as in a semi-trailer tipper, dimension 3000 mm must be observed, 2 white position lights at the front in LED, loose, 2 white/red outline lights at the rear, 2 x 7-pole tamper-proof sockets at the front, without connecting cable Germany, type approval according to EC 2007/46 for the complete vehicle, 24/7 service hotline, prepared for a double license plate holder in a single row: 1 x plastic and 1 x stainless steel interchangeable holder Warning sign according to ECE - 70, aluminum, loose, EBS, safe parking, without contour marking / reflective strip according to ECE R 048, Frame: DB 7350 Novagrau, landing gear: black coated Immediately available! Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: good (used), axle configuration: 3 axles, first registration: 04/2023, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Accessories = - EBS - Lift roof = Notes = Number of axles: 3, Tare weight: 6075 kg, Gross vehicle weight: 38000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2023, Customs seal, Lift roof, Sliding roof, Axle type: BPW = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Nwsdpfozdc Tyox Ad Soh Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 11 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Weights Unladen weight: 6,075 kg Payload: 31,925 kg GVW: 38,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 334 € per month (default, 60 months); Please inquire for further information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.