Used Felder Edgebander With Pre-Milling for sale (21,970)

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Chjdszuyh Iopfx Albjb Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), Year of construction: 2023, DEMONSTRATION MACHINE! Cjdpfxjy Hgxmj Albohb For sale is a used Felder KF 700 SP sliding table saw & spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical data: - Tilting circular saw and spindle moulder 90-45° - Sliding table 2500 mm - Extension table with mitre fence 2600 mm - Rip fence with fine adjustment - Cutting width 800 mm - Spindle fence with multi-adjustment system - 4 spindle speeds - 3 motors, each 7.5 HP (5.5 kW) - Automatic star-delta start The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Reference: R-D1618

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW Chsdpfxsu U Ad Re Albeb EPS bead storage 300 m3

Year of construction: 1993, condition: used, Milling cutter diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Chedpfsrv A Hmox Albsb Stop between 20° - 90° - 20° Pneumatic workpiece clamping Minimum quantity spray device Manual feed Weight: approx. 280 kg

Condition: good (used), Year of construction: 2001, For sale is a Felder KF-700 SP circular saw/milling machine with a cutting length of 3200 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical data: - Cutting length 3200 mm - Cutting width 850 mm - Cutting height 103 mm - Max. saw blade diameter 315 mm - 4 milling speeds - Direction of rotation switch - 3 motors, each with 3 kW / 4.1 hp - Year of manufacture 2001 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Codpfezichyex Albshb Related terms: circular saw, milling machine, combined machine Reference: R-B17MP

Condition: refurbished (used), For sale is a Swiss Schaublin 13 precision milling machine in fully refurbished condition—better than new. The machine has been completely overhauled in Switzerland. Its geometry has been reworked and the electrical system brought up to the latest standard. Codpoyw A Hzjfx Albehb All guideways are finely scraped and in perfect condition. All wear parts and spindles have been replaced. Belts are renewed, etc. The machine has not been used since the overhaul. In this condition, it is an absolute rarity and already considered an investment piece. Ideal for high-precision applications or collectors who appreciate a perfect machine tool.

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 422.03.143.04, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 510 mm, number of blades: 4, actuation type: electric, total length of planing tables: 2,100 mm, year of last overhaul: 2026, Welcome, For sale is a scarcely used Felder jointing and thicknessing machine in very good condition. Chodpfx Alezylwxjbob Manufacturer: Felder Type: AH751 Year of manufacture: 2004 GS-certified CE type-tested GS-tested for wood dust Motor: 5.5 kW Planing width: approx. 510 mm Planing height: approx. 200 mm Table length: approx. 2100 mm Overhead guard Table extension for thicknesser Motorized brake Number of knives: 4 Knife system: Felder/Brück reversible knives Feed rate: 6 + 12 m/min. Analog display for planing height Electric height adjustment with fine adjustment Dust extraction hood integrated Dust extraction connection: D 120 mm Space requirement: approx. 2100 x 1000 x 1100 mm Location: 49176 Hilter a.T.W., unpacked Handover in the current condition as inspected, without guarantee and warranty.

Condition: used, Year of construction: 2013, machine/vehicle number: 320.002.13, functionality: fully functional, operating hours: 3,600 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,150 mm, workpiece height (max.): 100 mm, number of axes: 4, number of slots in tool magazine: 18, controller manufacturer: Felder, year of last overhaul: 2025, Equipment: CE marking, CNC machining center Profit H10 22.43 Year of manufacture: 2013 Operating hours: approx. 3600 h System: Matrix table made of phenolic resin Codpfjzwt Ndex Albehb Slotted table with two rows of stops Automatic central lubrication HARDWARE: Control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Extraction: Central extraction via combined connections (D=250 mm) Software: Woodflash German (H20/H08/H10/H50) Travel range of the axes H10 22.43 X = 5230 mm Y = 2560 mm Z = 280 mm Working area: X = 4300 mm Y = 2160 mm Z = 105 mm Axis positioning speed: X = 100 m/min Y = 100 m/min Z = 30 m/min The machine will be in operation until calendar week 38 of 2026, after which it will be dismantled. In addition, 2 swivel heads for 5-axis machining can be purchased. These are not included in the quoted price and will be priced separately. The price applies ex works, including loading. Transport can be arranged and ordered separately. Assembly and installation assistance can also be offered as an option.

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Chsdpozp Nycofx Albjb Glue board thickness 12 – 45 mm Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Minimum width of glued boards 90 mm Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Feed motor 0.75 kW Heating motor 0.25 kW Final cutting motor 0.18 kW Linear milling motor 0.55 kW Polisher motors 2 x 0.18 kW Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Condition: new, Year of construction: 2026, Feed speed 9 m/min Board thickness 12 - 45 mm Minimum board dimensions (L x W) 90 x 170 mm Worktable height 960 mm Table extension (steady rest) 560 mm Codpfx Alozp Nz Hsbjhb Extension connector ⌀ 125 mm Installed power 6.1 kW Pre-milling 3000 rpm Front/back 12,000 rpm Top/bottom 12,000 rpm Polishing 3000 rpm Machine dimensions 3960 x 720 x 1748 mm Weight (net/gross) 800 / 950 kg Feed motor power 0.75 kW Glue tank heater motor power 1.315 kW Pre-milling motor power Milling 1.5 kW Plate heating motor power 0.125 kW Glue spindle motor power 0.25 kW Front/rear cutting motor power 0.37 kW Top/bottom cutting motor power 0.37 kW x2 Corner trimming motor power 0.37 kW Polisher motor power (top/bottom) 0.12 kW x2 (3-phase), 0.18 kW x2 (1-phase) Touchscreen control panel Air consumption 350 L/min Minimum extraction power 5 kW (for effective dust extraction from the edge bander)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Csdpfx Ajyahv Solbshb Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence Csdpjyzdnbofx Albjhb 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Cedpfx Alsyuty Sjbjhb Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 2021, Technical Data Automatic Central Lubrication Working Area Axis Travel X = 4000 mm Y = 1670 mm Z = 500 mm Working Range X = 3300 mm Y = 1280 mm Z = 250 mm, clearance height depending on the clamping system Operator Terminal on the Left Side of the Machine Handheld Terminal for Controlling Axis Speed, Including an Emergency Stop Switch Machine Software: Woodflash Consisting of: - CNC Board - Tool Database - Program Editor Position Indicator for Workpiece Support and Vacuum Suction Cup Vacuum Connection for Template Milling on the Left Side of the Machine: Connection: 12 mm 1 Vacuum Pump with a Total Suction Capacity of 90 m3/h at 50 Hz or 108 m3/h at 60 Hz Milling Spindle 12 kW (S6) HSK F63 12 kW (S6) Full Rated Power at Approximately 12,000 RPM Speed: 1000 - 24,000 RPM Air-Cooled C-Axis 0-360 for Milling Spindle 12-Position Linear Tool Changer on the Left Side of the Machine Frame, Including a Pickup Station for Aggregates Max. Tool Diameter: 250 mm Max. Tool Length: 240 mm Drilling Head DH 16 4H 2S 12 Vertical Spindles Chodpfxjzux Iao Albsb 7 Spindles in the X-Direction and 5 Spindles in the Y-Direction 4 Horizontal Spindles 2 Spindles in the X-Direction and 2 Spindles in the Y-Direction Pre-Travel = 70 mm Drilling Length = 70 mm Shaft Diameter D = 10 mm 2 Nut Saws, One Each in the X and Y Directions Max. Saw Blade Diameter: 120 mm Max. Blade Thickness: 5 mm Max. Speed, Continuously Adjustable: 7500 RPM Safety System with Light Curtain on the Front

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Codpfx Aloxxi T Uebehb Reference: R-A0117

Condition: excellent (used), Year of construction: 2018, operating hours: 9,219 h, functionality: fully functional, machine/vehicle number: 2730218, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhaim, controller model: HAIDENAIN TNC 530 HSC, total height: 4,070 mm, total length: 6,800 mm, total width: 6,500 mm, table width: 1,300 mm, table length: 1,800 mm, table load: 6,000 kg, overall weight: 19,000 kg, spindle speed (max.): 3,500 rpm, operating hours of spindle: 9,219 h, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, MACHINE FEATURES Model: RTX 25 TG130 Serial Number: 2730218 RTX Series Features Structure: Fixed bed and moving column. Movements: Longitudinal table and transverse column with constant support. Rotary Table: Replaces the fixed rectangular version for continuous machining operations. Head: Bi-rotational head as standard for maximum flexibility. Type: Universal milling machine with fixed bed. Applications: Precision mechanical machining and complex profiles. Construction: Designed and assembled in Turin by Goglio Milling Systems. Travels Longitudinal Travel (X-axis) 2500 RCV UL1007 Transverse Travel (Y-axis) 1700 RCV UL1007 Vertical Travel (Z-axis) 1500 RCV UL0714 Rotary Table TG-130_1300x1800 Chedpfxjyn Rduj Albeb Spindle Motor Power 24 kW Maximum Spindle Speed 3500 rpm Rapid Traverse Rate X-axis (CNC) 15,000 mm/min Rapid Traverse Rate Y-Z axis (CNC) 15,000 mm/min Rapid Traverse Rate Axes (Manual) 6,000 mm/min Working Feed Rate (CNC) 10,000 mm/min Working Feed Rate (Manual) 2,500 mm/min Continuous Torque Motors X-Y Axis 36 Nm Continuous Torque Motors Z Axis 36 Nm Tool Holder Electro-hydraulic Spindle Taper ISO 50, Tool Drawbar BIR 200 Maximum Permissible Load on the Table 6,000 kg Bi-rotational Head Continuous for B-axis 0 - 360° Module Rotary Table Coupled to Hydraulic Rotating C-axis 0 - 360° continuous Machine Chiller Yes Tool Magazine 32 Positions Operating Temperature 10-40 degrees C Base Machine Mass 19000 Kg CNC HEIDENHAIN TNC 530 HSCI

Condition: excellent (used), Control system: Heidenhain TNC 124 Chedpfx Aoipmmujlbob Travel distances X/Y/Z: 450/260/120 mm Travel distance W: 450 mm Clamping area (L x W): 770 x 320 mm Permissible table load: 100 kg Distance table – spindle nose (min. – max.): 0 – 110 – 560 mm Feed rate X/Y: 1 – 2000 mm/min Tool – quick-change system: SF 32 Speed range, continuously variable: 100 – 9200 rpm Drive power: 5 kW Space requirement (W x D x H): 1500 x 1480 x 2330 mm

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount Chedpfxjhik Eze Albsb - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: good (used), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, tool presetting device -Milling tool holders: Adapter for tool presetting device, 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Submission/Price: complete -Overall dimensions: 500/300/H170 mm Cjdpfx Alopix Nkobohb -Weight: 34.4 kg

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X,Y,Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. CNC milling plotter CORMAK C2040 is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass, dibond and metals. The plotter is mainly intended for use in the furniture and modeling industries. Dissecting table with four independent vacuum sections with dimensions of 2100x4000 mm. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2100 x 4000mm, Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor Linear bearings: trapezoidal rails, Hiwin carriages Spindle High-quality brushless spindle that is characterized by durability. Additionally equipped with an innovative AIR / not liquid cooling system! The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing Digital Signal Processing Chsdovupr Topfx Albsb The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2100x4000mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1580 kg Machine dimensions 2270x4570x2200mm Table height 715mm Guides linear Vacuum Pump 7.5kW or 5.5kW (optional) Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: used, Year of construction: 2000, Second-hand machine Year of manufacture: 2000 Features and technical specifications: - Milling unit spindle height adjustable via handwheel 0–125 mm Cjdpfx Ajzk Nx Ujlbjhb - Milling spindle swivel up to 45° via handwheel - Swivel angle display via digital readout - Tenon and slot table Z - anodised, table length 1000 mm - Milling stop 240 - Milling stop rails 450, aluminium, anodised - with 3-roller feed mechanism Availability: at short notice Location: 63934 Flörsheim

Condition: used, Year of construction: 2015, We are selling a Felder Perfect 710, complete with two additional cauldrons. Everything is in working order and ready for immediate use. Included: Felder Perfect 710 2 additional cauldrons Please contact me for viewing, further information, or pictures. Cjdpfx Aozc Ikholbshb

Condition: excellent (used), Year of construction: 2011, working width 950mm 1 kombi unit Cjdezxyrzopfx Albjhb pneumatic segmented pad two feeding speed electric table regulation pneumatic oscillation motor power 11kW year of production 2011

Condition: new, Year of construction: 2026, PREMIUM VERSION MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXIS. High-class CNC milling machine designed for the subtractive processing of materials, due to the whole range of configurations, it is used in many industries: industrial, electronics, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with user-friendly CNC control systems. The price quoted is for the machine itself, excluding additional equipment, installation, transport and training. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Cedpfx Aljiz S Hasbshb Work table The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2010 x 3010mm, Dissection table with four independent vacuum sections. Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions, The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor, Linear bearings: trapezoidal rails, Hiwin carriages. Spindle The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing - digital signal processing. The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to operate without having to load the program each time. We offer machine tools with real CE EU DTR - certified by the best in the EU. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2150x3200mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1450 kg Machine dimensions 2680x3600x2200mm Table height 715mm Vacuum pump 7.5 kW (optional) Underpressure 440 mbar Guides linear Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Press length without side pressing device: approx. 2,300 mm Press length with side pressing device: approx. 2,100 mm Press width, max.: approx. 1,400 mm 4 pcs. vertical pressing units, adjustable, each with 1 crank drive pressing unit, and 1 counter piece 1 pcs. horizontal pressing unit with 2 crank drive pressing units Csdpjzn Iwqjfx Albshb 1 pcs. counter pressure rail, fixedly mounted on the left side 1 pcs. lower support rail with crank drive