Used Feeder Maka -Used- for sale (45,568)

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 6V0146, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Ledpfxswmm S Te Aftohi Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex display Dyson apprentice training facility, in excellent condition

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102193, SPECIFICATION Table size 1244 x 230mm Lhodpoy S Shwjfx Aftsi Longitudinal traverse 700mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Spindle guard Coolant system

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 9725, SPECIFICATION Table size 1070 x 230mm Longitudinal traverse 660mm Cross traverse 250mm Vertical traverse 380mm Quill travel 125mm Quill feeds 0.038 – 0.152mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50 – 3500rpm Approx. weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Newall Topaz 2 axis DRO system Low voltage halogen worklight Guarding Coolant system Lhodpfsy Uuuxex Aftji

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Lhedpfx Aet Dmlfsftei Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Lhodpfjtylazjx Aftoi Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control Swarf auger Lighting Coolant system Enclosed guarding

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Lsdpjt Dmmvefx Aftohi Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Year of construction: 2021, condition: like new (used), functionality: fully functional, Specification Capacity 30 Ton Working length 1300mm Stroke length 100mm Throat depth Maximum open height without tools Fast speed of beam Bending speed Ljdpfsziahdex Aftjhi Return speed 200mm 300mm 100mm/s 10mm/s 90mm/s Backgauge travel 300mm Length 1500mm Width 1200mm Height 1910mm Approximate weight 2000kg Machine equipped with Cybelec CybTouch 8 control (X & Y axis) Top and bottom tooling Light guards

Condition: excellent (used), Machine in very good condition. It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Hu3Nhjg Parts conveyor, chips conveyor, bar feeder available. Spindels bore 42 mm IRCO feeder bar Lodovllbrspfx Aftjhi All manuals and documentation available

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cubic dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Z-axis: 480 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 x universal head for 5-axis milling with 90° head, Lhjdpezhvxpjfx Aftji 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed infinitely adjustable from 2,000 – 24,000 1/min., Rated power from 12,000 1/min., with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 rotating drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the reference plane. 2 tables with aluminum table top 2,000 x 2,250 mm with grid drilling. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 sliding doors to be operated manually, for front loading. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 separating partition (removable) between the tables. With protective cabin for the rear of the machine, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: used, Year of construction: 2001, machine/vehicle number: 21012101, functionality: fully functional, operating hours: 49,849 h, input voltage: 415 V, input current: 36 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 2,250 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 1,000 mm, workpiece weight (max.): 420 kg, number of axes: 5, number of slots in tool magazine: 10, controller manufacturer: Siemens, actuation type: electric, total height: 4,000 mm, total length: 7,300 mm, total width: 7,000 mm, table length: 2,250 mm, table width: 1,500 mm, control voltage: 24 V, 5-axis CNC machining center for wood or plastic. Lhedpfx Aozhtpfeftji The machine was used for contour milling of plastic components. It is equipped with an HSD spindle, and the tool holder is of the HSK63 type. The machine can be purchased with or without an extraction system, depending on the intended application. The dimensions specified for the machine include the extraction system. An inspection of the machine is possible at any time; it is currently still in production.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Fanuc Robodrill T14iA Vertical Machining Centre for sale. 1998 model with 8,000 rpm spindle and 14 tool ATC. SPECIFICATION Traverses X Axis 500mm Y Axis 380mm Z Axis 300mm Spindle Nose to Worktable Minimum 250mm Maximum 550mm Work Table Table working surface 650 x 400mm Table loading capacity (uniform load) 200kg Table surface configuration Number of T slots 3 Width 14mm Pitch 125mm Machine Dimensions Width 1550mm Depth 1900mm Height (min/max) 2067 / 2367mm Weight (approximately) 2100kg Spindle Speed range 100 – 8,000rpm Taper BT30 Feedrates Rapid traverse rate 48m/min Feedrate 1 – 30,000mm/min Toolchanger ( MAS BT30 Tools) Tool storage capacity 14 tools Tool change time – cut to cut 0.9 secs (2kg) Tool Diameter 80mm Tool Length 200mm Tool Weight 2Kg Coolant tank capacity 100 litres CNC Control System Fanuc Series 16iM Electrical Supply 415V, 3 ph , 50Hz Lhsdpfsnq Dguox Aftoi Compressed Air Supply 5kgf/cm2 (100 litres/min) MACHINE EQUIPPED WITH:- Coolant system Lighting Enclosed guarding

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1148877, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   Machine Equipped with Haas CNC Control Lsdpfx Afox Afpgetohi High flow coolant system Lighting Enclosed guarding Manual

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, SPECIFICATION Travel X axis stroke 762mm Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Length 914mm Max. Weight on table 1361kg T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar Lhodpewx I N Dsfx Aftoi MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 016-018828-450, SPECIFICATION Table 914mm x 500mm X axis traverse 830mm Y axis traverse 530mm Z axis traverse 580mm Spindle nose to table 115-695mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 22.4kW Rapid feed rate 30m/min Toolchanger capacity 30 tools Approximate weight 5800Kg   MACHINE EQUIPPED WITH: - Siemens 828D CNC Control Renishaw probe 15 0ff BT40 toolholders Coolant system Lighting Lodpjxzqq Tofx Aftohi Guarding

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105842, SPECIFICATION Table size 914mm x 356mm Maximum table load 1361Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 +1 tools Tool to tool time 2.8 seconds Approximate weight 3500Kg Lodpfx Afsykqtzetshi MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (Removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual

Condition: good (used), Year of construction: 2017, functionality: fully functional, cooling capacity: 238.1 kW (323.73 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,786 kg, input voltage: 400 V, total width: 2,180 mm, total length: 3,540 mm, total height: 2,500 mm, warranty duration: 6 months, AIRCOOLED CHILLER SYSTEMAIR SYSCROLL 240 AIR CO E COAT 238.1 KW Cooling capacity: 238.1 kW / 67.7 tons (12/7 — 35°C) Year of manufacture: 2017 Lhodpfx Aszhkm Usftoi Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer GSD80385VAB4-2 (scroll) + 2 pcs. Bitzer GSD80295VAB4-2 (scroll) Type of refrigerant: R410A Number of fans: 4 pcs. Hydraulic module: 1 pcs. water pump Wilo IPL65/130(136)-5.5/2-ERCD, expansion vessel. Dimensions: 3.54x2.18x2.5 m Weight: 1786 kg Working hours: 321/627/618 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Combined oscillating mortiser and drilling machine. Lsdjgiwl Dopfx Aftjhi Available immediately

Condition: ready for operation (used), Year of construction: 2013, operating hours: 82,340 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 18,000 rpm, overall weight: 24,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 5, This 5-axis MAKA Moving Beam with 840D was manufactured in 2013. It features a Siemens Sinumerik 840D control unit and a nominal power of 55 kW. With its advanced capabilities, this gantry milling machine is ideal for precision machining tasks. If you are looking to get high-quality milling capabilities, consider the MAKA Moving Beam with 840D machine we have for sale. Contact us for further details. - 2 units available- Control Unit: Siemens Sinumerik 840D- Number of Axes: 5-Axis (X, Y, Z linear axes and A, C rotary/swivel axes)- Pneumatic Operating Pressure: 6 bar- Control Voltage: 24 V- Nominal Power: 55 kW- Nominal Current: 145 A- Foundation Requirement: Reinforced concrete floor, quality EN 206, load capacity 2500 kg/m²- Workplace Lighting: Hall lighting of 250-500 Lux required- Ambient Operating Temperature: 10-35° Celsius- Operating Voltage: 400 V / 50 Hz AC- Pneumatic Connection Thread: ½"- Pneumatic Supply Line: Clearance width min. 1"- Compressed Air Quality: Drained and cleaned- Compressed Air Consumption: approx. 800 NI/h uncompressed- Noise Protection: Machine completely enclosed in a soundproof booth, interior illuminated. Sound insulation max. 20 dB(A) in medium to high frequency range with booth closed.- Safety Measures: Fully enclosed soundproof cabin, safety bumpers on the front edges of the tables, safety contact strips on the closing edges of the automatic sliding doors, limit switch protection on all sliding and hinged doors, movable partition between the tables. Lodpfszd Dfvjx Aftohi

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, in a portal design with two tables and two 5-axis head units for alternating operation. Ljdpfx Afezhbgfotehi Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base surface. 2 tables with aluminum table top 1,500 x 2,250 mm with grid drillings. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 manually operated sliding doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically powered roller shutters, 1 partition (removable) between the tables. With protective cabin for the rear of the machine, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Movable control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed infinitely adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the top surface. 2 tables with aluminum table top 3,000 x 1,500 mm with grid hole pattern. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 manually operated sliding doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected. Lhodpfjzhbbpex Aftoi

Condition: ready for operation (used), Year of construction: 2005, 5-axis CNC machining center MAKA MM 7t, in gantry design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2005 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 2 x 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm tool height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 10 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearing, water-cooled. Tool holder HSK-F63 with tool changer. 1 moving drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base plane. 2 tables with aluminum table top 3,000 x 1,500 mm with grid drilling. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. Lhjdpszhabzofx Aftei 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 sliding doors to be operated manually, for loading from the front. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2001, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2001 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 900C, integrated PC with 1MB memory and 3.5'' floppy disk drive. Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 1,500 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 1 x universal head for 5-axis milling with 90° head, 1 x high-speed milling spindle HSD 8 kW, SK 30 (ISO 30) Speed continuously adjustable from 2,000 – 24,000 1/min., Rated power from 12,000 1/min., air-cooled. Tool holder SK 30 with automatic tool changer. Lhodezg U A Ropfx Aftoi 1 x moving drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the top surface. 2 x tables with aluminum table top 1,500 x 1,500 mm with grid hole pattern. The tables can be coupled to machine larger components. 1 x pneumatic clamping system per table. 1 x vacuum clamping system per table. 1 x minimum quantity lubrication system with spray nozzles. Work safety: 2 x sliding doors, manually operated, for front loading. With partition between the tables. With protective cabin for the rear of the machine, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, the machine can be inspected there.

Condition: new, functionality: fully functional, power: 22 kW (29.91 HP), fuel type: electric, color: other, Year of construction: 2026, • The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression. • Work with wet and sticky materials without clogging and jamming. • Adjustable feed rate. • It occupies less space and has smaller height. • It works without dust, vibration and noise. • Low power consumption and maintenance frequency. • Width: 1400 mm • Length: 2500 mm • Motor power: 22 kW • Bar number: 5-9 • Elliptical bar shape Ljdpfx Afszg Tauetjhi • Aperture: 25-150 mm • Feeding size 50-1.500 mm • Chainy drive system • Max. Capacity 200-300 T / s • Capacities calculated according to the specified material density (1.6 tn/m3)

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. Lodpfx Aezg Tanoftehi FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Condition: used, Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Lsdpfx Aezg Imcjftjhi Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Z-axis: 480 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 x universal head for 5-axis milling with 90° head, 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 rotating drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base plane. 2 tables with aluminum table top 2,000 x 2,250 mm with grid hole pattern. To machine larger components, the tables can be coupled. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 1 minimum quantity lubrication system with spray nozzles per milling spindle. Work safety: 2 sliding doors to be operated manually, for loading from the front. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 partition wall (removable) between the tables. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: Southern Thuringia / Germany, where the machine can be inspected.