Used Esterer Ehd 30-Sv for sale (25,807)

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. Bodpfxjzgr Iqo Acnodg DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 29 h, functionality: fully functional, machine/vehicle number: 404890, overall weight: 2,421 kg, load capacity: 340 kg, arm reach: 3,326 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, A KUKA KR 340 R3330 from a demonstration system with very low operating hours is being offered, complete with KUKA KR C4 controller. Year of manufacture: 2020-03 Operating hours: 29h Equipment includes: - Energy supply axis A1–A3 ES13 092 CTR PNT EPS AIR - Energy supply axis A3–A6 ES36 034 CTR PNT EPS AIR - POWER SUPPLY XFMRless 400V - POWER INFEED XFMRless - INTERFACE Parallel-Safety X11 - INTERFACE Ethernet 1xRJ45 X66 - INTERFACE reference switch X42 - Board package CSP 2xUSB3.0 - MCC-40.1S Bdjdpfxsxz Rx Ro Acnog - System software KSS 8.5 - FINET# M/S 4.1 - eOperation 3.4 - pperSpotTech - gnosisSafety 3.0 - iceConnector pre-installed 2.1 - Reference switch assembly 7m straight - KUKA smartPAD-2 10m - Cable 7m CON GND - Cable set 7m CON X20.1/X20.4 - Robot pedestal height 1000mm mounting frame S960 H1000

Condition: good (used), functionality: unexamined, travel distance X-axis: 4,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,700 mm, total length: 12,000 mm, total width: 7,000 mm, table width: 1,000 mm, table length: 4,800 mm, rotary table diameter: 630 mm, overall weight: 25,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, MATEC 30 HV Universal Machining Center - Year of manufacture: presumably 2006 - Tool holder: SK 40 - Table with 9 T-slots - Incl. swiveling head: 360° - Incl. chip conveyor, coolant system, and safety fence Please note: the hydraulic clamping systems shown in the photos are not included in the scope of delivery! Please note: the machine can be transported on a standard truck! Bdjdpfx Acjzxzf Aensg FCA D-72589 Westerheim - loaded onto a truck

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine EPS cutting machine with 4 independent moving axes and Bdsdpfx Ajwfdm Escnjg variable machine table.

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Bdsdpfop S Tlhsx Acnjg Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2014, condition: ready for operation (used), A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible. Bjdjwfg Hujpfx Acnjdg

Condition: like new (used), Mazak VCN-530C 4 Axis VMC Year 2020, Smooth Control, Kitagawa 4th Axis with 300mm face plate 1300mm x 550mm table, 1050mm x 510mm x 510mm travels, 12,000rpm spindle, Bdjdszil A Hjpfx Acneg Renishaw probing,

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, film width: 250 mm, working height: 900 mm, overall weight: 1,200 kg, roll diameter: 700 mm, warranty duration: 6 months, Equipment: documentation/manual, This machine is a used edge-banding machine from the renowned manufacturer Barberán (model RP-30), equipped with a high-quality Düspohl piston melting unit. The system is specifically designed for the professional edge-banding of profiles and offers high flexibility in terms of the materials and adhesives that can be used. Key technical features: Application area: Ideal for the precise processing of wood and plastic profiles. Adhesive compatibility: Suitable for processing common hot-melt adhesives such as EVA, PO and PUR. Maximum working width: 250 mm for versatile profile geometries. Modern control system: Equipped with a clear control panel including a display for easy monitoring of process parameters. Bdsdpfxozxh E Ae Acnsg Efficient melting unit: The integration of the Düspohl piston melting unit guarantees a continuous and material-friendly melting process. The machine is in a ready-to-use condition and is perfectly suited for woodworking and plastics processing companies looking for a reliable solution for profile coating.

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Bdodozuyg Repfx Acnsg Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 24F104, Graco PROMIX 2KE – Demonstration unit, fully functional For sale is a used, fully functional Graco PROMIX 2KE, 30:1 pump ratio, IS, AA, from our demonstration stock. Bdedpfx Aszwk H Hscnjg Manufacturer: Graco Designation: PROMIX 2KE, 30:1 pump ratio, IS, AA Article No.: 24F104 Condition: used, fully functional, demonstration unit Offered for sale as part of a stock clearance. This is a great opportunity to acquire a proven, little-used Graco system at attractive conditions. We will be happy to assist you with any questions.

Condition: new, Fanuc A06B-2269-B400 #0100 SV MOTOR AIS 30, serial number: C173A0063, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. Bedji D H Rzopfx Acnodg

Year of construction: 1995, condition: ready for operation (used), Manual edger DK 90 consisting of: 2 x under-table crosscut saws, line laser, edger, roller conveyor with slat separator, and tilting table. Naturally equipped with all associated control cabinets and hydraulic power unit. Additionally included are numerous templates and a fixed slat head. Inspection is possible upon prior and mandatory appointment. The price is exclusive of 20% VAT, ex works, excluding dismantling, loading, contract preparation, and customs clearance costs. Bdedpfeq U R Etox Acnjg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 33,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins and 2 kingpin positions. Front locking on tipper ram mount with bilateral tapered wedges, rear locking on continuous swivel shaft with return spring. Container mounts: Locking crossmember, 2-fold for locking 1 x 20 ft or 1 x 30 ft container. Adjustment via central telescope as an interlocking central tube frame with bolt locking. 24 ton, 2-stage support jack, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1850 mm. 2 chock blocks with holder. Half-shell mudguards with anti-splash flaps according to EC standards. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection) Actuation hydraulically via truck auxiliary drive. Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Axle/chassis laser-aligned, reducing tire wear and fuel consumption. Axle spacing offset mm (combined transport) up to 44 tons total weight. Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake Tele Control Axle load reduction for easy telescoping. 2 fail-safe coupling heads at the front, without connecting line. EBS, electronic braking system with EBS socket at the front, without connecting cable. Bsdpfxsi Ri Avo Acnjdg Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the instrument panel in the driver's cab; the truck must be pre-equipped accordingly, no truck installation. Wheels and Tires 385/65 R22.5, manufacturer's choice. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Additional LED work light at the rear, switched via reversing light. Country of Approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single-line. Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear. Paintwork Frame DB 7350 Novagrau (dark gray) 10-year warranty against rust-through. Support legs, black coated. Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: ready for operation (used), Year of construction: 1989, Working width 300mm Working height 200mm 5 spindles Spindles diameter 50mm Spindles set: 1. Bottom – 7,5kW 2. left – 7,5kW 3. right – 7,5kW 4. top – 11kW 5. bottom – 7,5kW Bsdszxx Hqepfx Acnjdg Feed speed max 34m/min – variator Feeder with cardan Toothened roll in the table before first head Table lubrication Jointer on two last heads

Condition: good (used), Year of construction: 1976, functionality: fully functional, Cold circular saw with automatic feeder Year of manufacture: approx. 1976 Equipment: - Standard accessories - Automatic feeder, cutting length 1700 mm - Various saw blades - Coolant system - Infeed roller conveyor 2400 mm, split (2 x 1200 mm) - Outfeed roller conveyor 500 mm Bedpfx Acowtdi Ajnodg - Documentation Condition: good, workshop tested

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc. Bdedozht Hwepfx Acnog

Condition: good (used), functionality: fully functional, For sale is a robust WEIMA ZM 30 four-shaft shredder/granulator for shredding wood, residual wood, and production waste. The slow-running four-shaft cutting unit and the generously sized feed hopper enable reliable shredding of various types of wood waste. Technical data: Bjdezxrxgjpfx Acnjdg Manufacturer: WEIMA Type: ZM 30 Machine type: Four-shaft shredder / four-shaft granulator Motor power: 2 × 7.5 kW Total power: 15 kW Speed: approx. 15 rpm Cutting unit width: approx. 460 mm Hopper opening: approx. 600 × 1,240 mm Dimensions (L × W × H): approx. 1,490 × 1,290 × 1,970 mm Weight: approx. 1,300 kg Oversized feed hopper Slow-running four-shaft cutting unit Robust gear unit Emergency stop switch Heavy-duty industrial design The machine is in used condition, commensurate with its age. Condition and scope of delivery as per photos. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to confirmation. All information without guarantee.

Condition: used, mileage: 1,001 km, first registration: 01/2000, color: white, driver cabin: other, gearing type: other, Year of construction: 2000, Vehicle location: Bovenden, storage box, 2 compartments Body: Esterer tank body for heating oil & diesel with 2 compartments approx. 13,350L (5,950L/7,400L) Dismantled from DAIMLER-BENZ Actros 1831 4x2 with 3,900mm wheelbase! Next leak and functional test in 03/2027! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Bjdpfewqn Rlsx Acnsdg - .

Condition: used, Year of construction: 2007, functionality: fully functional, The tempering units from the company Single are for sale. All three units are water-cooled models with different specifications: Medium: Water Bjdpfxjziwlgo Acnodg 1. STL 1-9-B5/20-TK6, 9 kW heating capacity and 20 kW cooling capacity 2. STL1-12-30-TKN4, 12 kW heating capacity and 30 kW cooling capacity 3. STL1-12-30-TKN4

Condition: used, Year of construction: 1952, Double-edge trimmer / circular saw for edge trimming Manufacturer: Esterer Type: DK600 Year of manufacture: 1952 Maximum feed width: 70 cm 0-line on the left Bdedpozl N Tnofx Acnsg Adjustable saw blade on the right Immediately available Location: Austria, near Ried im Innkreis

Condition: used, maximum load weight: 27,920 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/1993, next inspection (TÜV): 02/2027, total width: 2,500 mm, total height: 3,100 mm, Equipment: ABS, * Permanently connected tank with 6 chambers, total capacity 40,320 liters * 7,360 l / 7,430 l / 6,750 l / 5,400 l / 5,880 l / 7,500 l (Chamber 1-6) * FMC MultiFlow tank truck control system * FMC GMV Z1000 tank truck hydraulics * Epson printing unit * Hose reel on the rear right side Bdedpszv Dgwofx Acnjg ----* Knorr braking system with ABS * BPW axles with drum brakes * 1st axle can be lifted * Central lubrication system * ADR certificate according to 9.1.1.2: FL & AT * Tank coding according to 45.3.3.1 of the ADR: LGBF ----* Tire dimension: 385/65R22.5 * Technical total weight: 34,000 kg * Tare weight: 6,080 kg * Overall length: 11,350 mm * Tank periodic inspection due: 02.2026 * Tank hydrostatic test due: 02.2029 * Safety inspection due: 08.2026 ----Vehicle number: 11955----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. -----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/safety inspection, complete export processing, arranging financing, applying for export license plates, vehicle transport, vehicle registration, recovery and vehicle transportation. -----Your VTS Team

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: type plate available, Nikon MCAx30+ 7-Axis Measuring Arm with H120 Laser Scanner – Complete System Nikon Metrology MCAx30+ | 7-Axis | 3.0 m | H120 Scanner | Year of Manufacture 2017 For sale: a Nikon MCAx30+ 7-axis measuring arm with an H120 laser scanner, manufactured in 2017. Bdedpjzxz Ikjfx Acnjg The system is in very good technical and optical condition and has been regularly maintained. Both the measuring arm and the laser scanner have current calibrations. Ideally suited for 3D metrology, quality control, reverse engineering, component measurement, CAD comparison, prototyping, and mobile 3D data acquisition. Equipment Nikon MCAx30+ 7-axis measuring arm Measuring range approx. 3.0 m Nikon H120 laser scanner FOCUS software Current calibration of the H120 scanner Transport case for measuring arm Separate transport case for scanner Probe 3 mm Probe 6 mm Reference probe Calibration sphere Calibration rod Calibration plate for the laser scanner Complete, ready-to-use system Condition The measuring arm and the H120 scanner are in very good condition. The system has been carefully handled and, due to the current calibrations, can be used immediately for professional measuring tasks. The MCAx30+ offers high flexibility in mobile 3D metrology thanks to its 7-axis kinematics and 3-meter measuring range. In combination with the H120 laser scanner, the system is suitable for both conventional tactile measurement and rapid, non-contact measurement of larger components. Thanks to the extensive accessories and the two transport cases, the system is offered as a complete measuring package. Inspection and functional testing are possible after prior arrangement. The system is preferably sold as a complete unit. If you have any questions about the equipment, software or technical condition, please do not hesitate to contact me.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 960702A20v3001, overall weight: 200 kg, total length: 1,115 mm, total width: 555 mm, total height: 450 mm, volume flow: 280 m³/h, power: 7.5 kW (10.20 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: AC, type of cooling: water, rotational speed (max.): 1,500 rpm, warranty duration: 12 months, protection type (IP code): IP55, Leybold Sogevac SV 300 B ATEX Cat. 2 INT Special1 GB – NEW, unused, immediately available We are offering a new Leybold Sogevac SV 300 B rotary vane vacuum pump with ATEX Category 2 (internal) and water cooling. The pump is no longer in its original packaging but has never been put into operation and is in technically and visually flawless, as-new condition. Ideal for demanding applications in the chemical, pharmaceutical, and food industries, as well as for all areas with potentially explosive atmospheres. Technical Data • Model: SV 300 B WATER ATEX Cat. 2 INT Special1 GB • Design: Single-stage, oil-sealed rotary vane vacuum pump • Pumping speed: approx. 240 m³/h (50 Hz) / 290 m³/h (60 Hz) • Ultimate pressure: down to 0.08 mbar • Cooling: Water cooling (min. 600 L/h, max. 30 °C) • Certification: ATEX II (i) 2G b IIB 180 °C (50 Hz) / T3 (60 Hz) – for indoor use • Operating temperature: Ambient 10–50 °C • Connection: 3-phase, IEC motor • Condition: As new, unused, not in original packaging Special Features • ATEX-compliant design for hazardous (explosive) atmospheres • Robust, long-lasting construction – ideal for continuous operation • Low noise and vibration • Integrated oil mist separator with automatic oil return • Maintenance-friendly due to easy access to all components Bsdpfx Aozkaw Uecnsdg Fields of Application • Chemical process engineering • Pharmaceutical production • Food processing • Packaging and drying processes • Laboratory and research applications • General industry with ATEX requirements Further Details: Price: On request Delivery: Possible / Collection by arrangement Scope of delivery: Pump, original documentation, accessories as per manufacturer

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben Bodpfx Aow Dn S Aecnjdg

Condition: used, Trimming saw Esterer DKE Bjdsy Da Hfopfx Acnodg Passage width: 600 mm Passage height: 160 mm with 22 kW drive motor including spare saw blades including spare templates Location: Germany, near Chiemsee