Used Epiroc Scooptam St7 for sale (39)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Cryovac packing line whit Cryovac VS 90 belt vacuum machine and Cryovac hot water shrink tunnel mod ST 77 SRH. Belt wide 70 cm. Can be combined whit a busch 400 cc vacuum pump. Guodpfx Aeydnupobmsc

Condition: new, Type: ST-700 Guodpfxsh Dp Nrj Abmjc Sealing length: 4 * 620 mm Vacuum pump: 40 m3/h Machine cycle: 20 - 40 sec. Voltage: 380 V, 50 Hz Electric power: 3.3 kW Machine dimension in cm: Width: 145 Lenght: 65 Height: 98 Delivery time: after advanced payment, 1 working day

Condition: used, Transformer, transformer, converter, three-phase autotransformer -2 pieces: three-phase transformers DTST 7.5 -with: additional electronic modules -Primary: 400 V -Power: 5.5 kVA each -Dimensions: total 200/430/H740 mm -Total weight: 164 kg Gedpfx Aofk Ez Tebmouc

Year of construction: 1989, condition: used, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with: 1-axle turntable steering -rotating platform: 3460 x 2700 mm -4 roller conveyors, rollers: Ø 65 x 365 mm -Load capacity: max. 7000 kg -Tires: solid rubber -Trailer hitch -External dimensions: 5530/2700/H590 mm Gujdpefk Smpofx Abmec -Own weight: 1410 kg

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 TWIN 40 HP MOTORS DUTTING CHAMBER OF 956mm/37" X 635mm/25" Gedpfx Aoxmthrebmouc DISCHARGE HEIGHT 1,067mm/42" THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Year of construction: 1997, condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with: 1-axle turntable steering -3 roller conveyors, rollers: Ø 900 x 560 mm -Load capacity: max. 7000 kg -Tires: solid rubber Gujdpfx Abjfk Smmomec -External dimensions: 4520/3375/H580 mm -Own weight: 1130 kg

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes Gsdpsvtn Hmofx Abmjuc - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Year of construction: 1992, condition: good (used), functionality: fully functional, machine/vehicle number: DST 750 K7, We offer this used PANO Verschluss DST 750 twist-off cap sorter, year of manufacture 1992. Manufacturer: PANO Verschluss Model: DST 750 Year of manufacture: 1992 Condition: good Category: 334 Machine type: twist-off cap sorter Gusdpfx Aboyat Igemec If you have any questions or need further information, please send us a message or contact us by phone.

Condition: good (used), functionality: fully functional, Year of construction: 2020, battery capacity: 775 Ah, remaining battery capacity: 72 %, battery voltage: 48 V, total length: 1,210 mm, total width: 420 mm, total height: 485 mm, overall weight: 1,118 kg, Forklift battery 48V 5PzS775, TESTED at 72% capacity. Year of manufacture: 2020. Dimensions (LxWxH): 1225mm x 425mm x 785mm. Weight: 1118kg. The battery has been maintained and tested by a specialist company. Capacity test (C5 discharge test): 556/775 Ah. Remaining capacity: 72%. Equipped with Aquamatik filling system (BFS). With pole screws but WITHOUT end cabling. Gujdpfxoyarmbo Abmoc

Year of construction: 2002, condition: good (used), Cryovac ST77 RHE Dip Tank Qty 2 in stock Full stainless steel 46KW, 50Hz, 380/415 V, 60 amp Gjdpfoim Swhox Abmeuc Air pressure 6 Bar

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, total width: 330 mm, total length: 570 mm, total height: 1,090 mm, overall weight: 70 kg, Equipment: documentation/manual, The Mecmesin OmniTest tensile/compression testing machine is a robust and precise single-column universal testing machine. Together with the VectorPro MT software, the OmniTest is an excellent choice for product research and materials testing. Gusdpfx Abex Apg Asmsc The sturdy and durable frame accommodates load cells ranging from 5 N up to 5 kN or 7.5 kN. Multiple load cells are available and can be quickly exchanged, allowing for tests to be performed across virtually any required range. Naturally, a wide range of testing setups is available. The tester is designed to deliver outstanding performance and ease of operation at an attractive price. Existing Mecmesin customers are already familiar with the reliable hardware, which is always robust and built for intensive use. VectorPro MT software is user-friendly and available in multiple languages, including Dutch. The intuitive graphical user interface enables any operator to quickly configure and perform tests. Delivery is limited to the Netherlands and Belgium. Key features include: – Simple operation – Load cells from 5 N to 7.5 kN – Software highly suitable for use with touchscreens – Multilingual software, including Dutch – Reporting to Excel, PDF, email, etc. – Various options such as extensometers available – 30 years of experience and satisfied customers – Includes 1-year warranty, commissioning, and training – We select the grippers together with you (not included) A PC (touchscreen) shown in the picture is optional.

Condition: used, Kemper ST 75 A spiral mixer with 2 bowls 120 kg dough Gedpfekyzk Hox Abmouc capacity in flour 75kg bowl contents 180 liter

Condition: new, Year of construction: 2021, Field of application: Construction Empty weight: 175 kg General condition: very good Technical condition: very good Visual appearance: very good Please contact Ö. Inalkac for more information We offer you new tool, chisel, moil point, meissel, Punteros, wedge chisel, conic. For Atlas Copco Epiroc HB2200 Gjdpoyz Tiujfx Abmeuc MB1200 MB1000 MB1500 MB1700 HB2000 HB2200 HB2500 HB3100 Montabert, Rammer, Soosan, AJCE

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface Gjdpswwq Hcsfx Abmjuc 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk