Used Emmegi Cnc Machining Center for sale (69,686)

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: Working area X: 3,400 mm Working area Y: 1,287 mm Working area Z: 180 mm Number of milling spindles: 1 Main motor: 15 kW Speed max: 24,000 rpm 4th axis Nsdpfx Aozc Sk Eed Solc Tool clamping system: HSK-F63 Tool changer positions: 18 Vertical drilling spindles: 18 Horizontal drilling spindles X: 6 Horizontal drilling spindles Y: 2 Nut saw in X direction Design: Cantilever machine Machine table: Console table Number of consoles: 6 Positioning aid: Dot laser Number of vacuum pumps: 1 Capacity of vacuum pumps: 140 m³/h Safety device: Foot mat Control system: BECKHOFF CONTROL Software: HOLZ-HER CAMPUS V6.4 Conformity marking: CE marking Weight: approx. 3,840 kg Space requirement length: 6.7 m Space requirement width: 4 m Availability: Short notice, by arrangement.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: X = 1800 mm Y = 900 mm Z = 80 mm Made from 18 mm Koskisen panels, consisting of a milling table (X-axis), a gantry (Y-axis), and a Z-axis. Milling bed in 19 mm MDF used as a sacrificial plate with guide rails and T-slot nuts for clamping. Subframe with reinforcements, filled with polymer concrete, prepared for transport with pallet truck or forklift. Mechanical set consisting of profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control set consisting of a Triple Beast, for controlling 3 axes, with Ethernet interface. Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm with motor cables, as well as power supply unit with 48V, 6.7A, LED board for breakout board, ribbon cable and proximity sensors, small parts like single-core wires, wire end sleeves, control cables, heat shrink tubing, and cable lugs. Fully installed in an aluminum enclosure including electrical wiring and emergency stop. 21.5 inch built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic control desk. Tool length sensor for determining the length and updating the active zero offset. Special equipment: High-frequency spindle with 2.2 kW, including locknut, frequency inverter, line filter, braking resistor, and collet set. Nsdpfxsw Nadys Ad Sslc PC with 8 GB RAM and AMD processor CAD software Rhino 5.0 for creating both simple 2D data and 3D solid models Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: Nedpewka Upjfx Ad Selc - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. 10000 rpm Nlsdpfxszggrde Ad Ssc 500mm x 450mm x 400mm SK 40, 16 tool places SINUMERIK 840 D

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel ranges: X/Y/Z = 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Nsdpfx Adewwt Nme Solc Fixed table dimensions: 1,100 x 1,100 mm Tool interface: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 tons. 23626

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Type: UVA 550 Plus Year of manufacture: 2012 Control system: Siemens 828D Operating hours: approx. 3,000 Travel ranges: X/Y/Z: 600 x 400 x 500 mm Nedpfjwv Tm Njx Ad Selc Tool positions: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon measuring probe Chip conveyor Spindle cooler IKZ (internal cooling system) 23626

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: KMM 334-2052, Used CNC Vertical Machining Centres – 3-axis CNC (X/Y/Z) X travel: approx. 800 mm Y travel: approx. 400 mm Z travel: approx. 350 mm Control: Siemens 840D Tool magazine: approx. 42 positions (depending on equipment) Njdpfxoyklx Se Ad Sslc Spindle taper: HSK 63 Max. spindle speed: ~10,500 rpm Spindle drive power: approx. 18.5 kW Weight: approx. 7,500 – 8,800 kg Dimensions: ~3.5 × 3.5 × 3 m (L×W×H)

Condition: excellent (used), Year of construction: 1999, CNC horizontal machining center DECKEL MAHO DMC 60 H SIEMENS CONTROL Year of manufacture: 1999 Technical data: X-axis: 600mm Y-axis: 560mm Z-axis: 560mm Nlsdpfx Adsvn Ra Ss Sjc B-axis: 360° Pallet: Number: 2 Size: 400x500mm Permissible load: 600kg Weight: 10,500kg

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Nedpfsy D Rv Dex Ad Selc Storage location: Customer

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Nodpfx Asw R St Ned Sslc

Condition: used, Year of construction: 2006, total height: 5,000 mm, total length: 7,500 mm, total width: 6,000 mm, overall weight: 45,000 kg, Technical data (XYZ): X 2000 mm / Y 1800 mm / Z 1100 mm Control: HEIDENHAIN iTNC 530 Miscellaneous: 60-tool changer, 10,000 rpm,HSK100, rotary table, swivel head, internal coolant supply, chip conveyor. Travel X-axis: 2000 - mm Dimensions (LxWxH) approx.: 7500 x 6000 x 5000 mm Travel Y-axis: 1800 - mm Weight approx.: 45,000 kg Travel Z-axis: 1170 - mm Year of construction: 2,006 Condition: in working order Nljdpezhdrkefx Ad Ssc Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: used, Year of construction: 2012, total height: 4,500 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 50,000 kg, Control: HEIDENHAIN iTNC 530 Additional Features: 60-tool changer, 12,000 rpm, HSK100, chip conveyor system, coolant system with filter, work platform. Travel X-axis: 1800 - mm Dimensions (LxWxH) approx.: 8000 x 6000 x 4500 mm Nedezhdrdopfx Ad Solc Travel Y-axis: 2100 - mm Weight approx.: 50,000 kg Travel Z-axis: 1250 - mm Year of construction: 2,012 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2015, total height: 5,000 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 85,000 kg, Technical data (XYZ): X 2700 mm / Y 2700 mm / Z 1600 mm Control: HEIDENHAIN iTNC 530 Miscellaneous: 63-tool changer, 12,000 rpm, chip conveyor, coolant system, separate cooling unit, working platform, net weight 80 t. Weight approx.: 85,000 kg Dimensions (LxWxH) approx.: 9000 x 6000 x 5000 mm Year of construction: 2,015 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No Nlodpfx Adozhdq Te Soc

Condition: used, Year of construction: 2014, Working dimensions: X = 3425 mm, Y = 1287 mm, Z = 325 mm. Max. workpiece height: 180 mm. Max. clearance under the hood: Y = 1450 mm / Bumper version = 1370 mm. Includes CabinetControl Base, 1 machine license, and 1 office license. Milling head 7830, 1-stage, power 6.5 kW, air-cooled, n(max.) 1000 - 18000 min-1, infinitely adjustable. Max. power at 12000 min-1 to 18000 min-1 with HSK-F 63 tool holder, with collet chuck with HSK shank. Drilling unit 7884, 14 spindles, 10 vertical spindles individually accessible, arranged in an L-shape, 6 in the X direction and 4 in the Y direction. Drive power 3 kW, 32 mm pitch. Sawing unit: Integrated sawing unit for sawing/grooving in the X direction, n(max.) 1000 - 5650 min-1, infinitely adjustable. Tool holder: A = max. DM = 125 mm. Location: Supplier. Nledpfoy Tpz Rox Ad Sjc

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, in portal design with two tables and two 5-axis head units for alternating operation. Year of construction: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP components. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 1,500 mm Y-axis: 2,250 mm Z-axis: 650 mm, at 120 mm tool height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Nlodjzhbgfjpfx Ad Ssc Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 traveling drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base. 2 tables with aluminum table top 1,500 x 2,250 mm with grid drilling. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 manually operated sliding doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 partition wall (removable) between the tables. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Movable control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed infinitely adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the top surface. 2 tables with aluminum table top 3,000 x 1,500 mm with grid hole pattern. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 manually operated sliding doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected. Nledpfjzhbbpsx Ad Sec

Condition: ready for operation (used), Year of construction: 2005, 5-axis CNC machining center MAKA MM 7t, in gantry design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2005 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 2 x 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm tool height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 10 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearing, water-cooled. Tool holder HSK-F63 with tool changer. 1 moving drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base plane. 2 tables with aluminum table top 3,000 x 1,500 mm with grid drilling. 1 pneumatic clamping system per table. Nedpfjzhabzox Ad Selc 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 sliding doors to be operated manually, for loading from the front. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: used, Year of construction: 2005, operating hours: 40,300 h, machine/vehicle number: IntNr231576, A used AXA VSC-1M/2E CNC vertical machining center, manufactured in 2006 and equipped with a HEIDENHAIN iTNC 530B CNC control, is for sale. Technical data Design: Moving column machine Number of axes: 3 axes Machining operations: Milling, drilling, threading Operating mode: CNC operation Swivel machining Tool holder: SK 40 Tool magazine Chip conveyor Coolant system X-axis travel: 1,760 to 9,000 mm Y-axis travel: 550 mm Nedpfx Adozatgpj Sslc Z-axis travel: 600 mm Distance from table to spindle nose: 180 to 780 mm Table surface: X-travel + 400 mm x Y-travel, 3 T-slots 14 H9, T-slot spacing 160 mm Table load: 800 kg/m² Rapid traverse: 30 m/min The standard tool changer has 22 tool positions; optional extensions up to 216 tool positions are possible. Tool change time: approx. 4 seconds. The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale.

Condition: used, Year of construction: 2015, CNC machining center Manufacturer: Chiron Type: FZ 12 W Magnum Year of construction: 2015 CNC control: Siemens 840D solution line Travel distances: X/Y/Z = 550 x 400 x 360 mm Nljdpfxszfppce Ad Sec Spindle: 15,000 rpm Tool holder: HSK63 Internal coolant supply Rotary table Integrated workpiece changer 32-tool capacity Glass scales Chip conveyor Laser control for break detection 23626

Condition: good (used), Year of construction: 2012, 5-Axis CNC Machining Center Manufacturer: AXA Nlodszfhdxjpfx Ad Sjc Machine Model: VPC-2800U Control System: Siemens Year of Manufacture: 2012 Technical Specifications Working Area - X travel vertical (mm): 3,900 - Y travel (mm): 2,940 - Z travel (mm): 1,100 CNC Rotary Table - Clamping area (mm): ø 2,800 Feed Drive - Max. rapid traverse speed in X/Y/Z (m/min): 30/30/25 Working Spindle - Standard drive No.: 140 Spindle speed range (rpm): 30-7,500 Spindle power max. duty cycle 100% (kW): 63 Spindle torque max. duty cycle 100% (Nm): 191 Tool holder: SK50 Swivel Head - Swivel range B-axis (degrees): 90 - Indexing: freely interpolating Tool Changer - Tool stations: 60 Please note: The machine is NOT equipped with a turning function. Changes and errors in the technical data and information excepted.

Condition: used, Year of construction: 2007, operating hours: 33,122 h, Hermle simultaneous 5-axis CNC machining center Type/Model: U 1130 Condition: Used Year of manufacture: 2007 Operating hours: 33,122 h Spindle hours: 12,054 h Technical data: Travel range X/Y/Z: 1130 (1300) mm x 720 mm x 630 mm Nlodjzfg U Nspfx Ad Sec Feed rate: Manual / setup mode: 1 - 2000 mm/min Programmable X-Y axis: 1 - 30000 mm/min Programmable Z axis: 1 - 20000 mm/min Rotary table: Tool interface: SK 40 Total connected load: 32 kW Space requirement (L/W/H) approx.: 3.66 m x 4.38 m x 2.57 m Weight approx.: approx. 10 tons Equipment: - Heidenhain iTNC 530 control system - Heidenhain TS 640 infrared measuring probe - 16-position tool changer - incl. SK 40 tool interface plus various tools - Machine vise - IKZ (internal coolant supply) - Paper band filter - Oil cooler - Chip conveyor - Control cabinet air conditioning - RS 232 interface - LAN interface Costs for delivery by freight forwarder to the curb, see shopping cart or individual offer for inquiry items.

Condition: ready for operation (used), Year of construction: 2011, A vertical machining center Avia is available. Travel X/Y/Z: 650mm/540mm/620mm, Table dimensions X/Y: 800mm/540mm, Max. table load: 700kg, Speed: 10000rpm, Tool holder: SK40, Tool stations: 24, Rapid traverse: 25m/min, Positioning accuracy: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2200mm/2600mm/2850mm, Weight: approx. 4200kg, Control: Heidenhain iTNC 530. Including 3D probe, Through-spindle coolant and chip conveyor. Documentation available. An on-site inspection is possible. Njdpozg Iqbefx Ad Solc

Condition: used, CNC turning machine MONFORTS, type RNC 300 MultiTurn with driven tools and Y-axis Year of manufacture 2005 CNC control system FANUC Series 18i-TB Maximum turning diameter over the bed cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps - with tailstock, chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - Collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 Nledpfx Aozfau Asd Soc - 4 driven tools with collet ER 25 - Chip conveyor with integrated coolant system - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Worktable TV with 10 supports L=1500 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Njdpfxox Twd Ho Ad Selc Location: Nattheim

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Nedpfxoy Dta So Ad Sjlc