Used Electromechanical Flip-Flop Relay for sale (953)

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years Lredpsyxhq Uefx Ab Asu - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: like new (used), Coil: 24V AC/DC 3.0VA 1.5W 50-60Hz 1) ID No.: 774059826328 2) ID No.: 774059825212 Area of application: Safety circuit Ledpfx Asyt E Dmsb Aoru Width: 22 mm Height: 87 mm Depth: 120 mm Weight: 214 g

Condition: used, Kistler 2151B30154002 Electromechanical NC Joining Module List price: €19,000 net   The NC joining modules NCFH type 2151B... consist of a robust housing in which a position sensor is integrated as an absolute encoder and a piezoelectric pressure/tension force sensor. The pressure or tension forces acting on the sensor generate a proportional electrical charge in the piezoelectric measuring element, which is converted into an analog voltage signal by the integrated charge amplifier.   The drive motor is an electronically commutated AC servo hollow shaft motor, which is controlled by a servo amplifier. Constant speed, i.e. constant travel speed, is ensured. Standard functions such as joining on a block, positioning, and force-controlled joining, as well as moving to intermediate positions, are supported.   Technical data: with hollow shaft motor and compact design Integrated piezoelectric force sensor including charge amplifier and position absolute encoder Measuring direction: pressure / tension Measuring range 1: 30 kN Measuring range 2: 15 kN Stroke: 400 mm Path repeatability: 0.01 mm Lrsdpfxjiuxtio Ab Aou Max. travel speed: 300 mm/s With holding brake   Item condition: new, with signs of storage   You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, machine/vehicle number: 160135F-01L, For sale: National Instruments PXI-2569 100-Channel SPST Relay Module, in fully functional condition. Manufacturer: National Instruments (NI) Model: PXI-2569 Condition: Used – Fully Tested and Functional Tested with: NI MAX – operational functionality verified Channels: 100-channel SPST relay Max. switching voltage: 100 V DC Max. switching current: 1 A/channel Max. switching power: 60 W/channel Scanning list: 32,000-step deterministic scanning Interface: PXI Ljdpozh Ipgsfx Ab Aeru Tested with NI MAX software, confirming the functionality of all 100 relay channels. Fully software-programmable with NI-SWITCH driver, compatible with LabVIEW and LabWindows/CVI. Ideal for automated test systems and medium-power switching applications. Removed from a working industrial environment, no faults found. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection. If the phone number is unavailable, please use our email address to contact us.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: VKE / FLPS2 – 4APC/S, type of input current: three-phase, Automatic Vertical Strapping Machine VKE / FLPS2 – 4APC/S Current Status & Availability: The strapping system is fully operational and is currently still in daily use. Availability: The entire system is currently fully integrated into the production process and can be inspected under operating conditions after prior arrangement. The planned dismantling/replacement must be carried out by the buyer during calendar week 46-47 / 2026. Technical Data: Pallet Types: Pallet width 500 to 1000 mm Pallet length 600 to 1200 mm Package height (incl. pallet) min. 500 - max. 2000 mm Conveyor height 500 mm Weight (incl. pallet) 150 to 1000 kg Package stacking method: automatic Under-stretching: no Conveyor speed: 12 m / min Pallet transport direction: lengthwise onto lengthwise boards Centering accuracy: centered on the stop light barrier Machine Components: Pneumatics: Festo Ljdpfxey Szflj Ab Asru Gear motors: SEW Control system: PLC S7-200 Control cabinet: Rittal Protection class: IP 55 Main switch: Möller Fuses: Siemens Relays: Omron Push buttons: Siemens Signal lights: Telemecanique Light sensors / light barriers: Datalogic Inductive proximity sensors: Omron / Siemens Cam switches: Siemens Contactors: Telemecanique

Condition: excellent (used), Year of construction: 2018, The EKOMEX RBM 500 is a frozen block shredder designed for the mechanical breakdown of deep-frozen meat and hard, fibrous products in meat processing facilities. Manufactured in 2018, the machine features a 19 kW electric motor, a net weight of 1,600 kg, and a comprehensive safety interlock system. The shredded raw material is discharged directly into a meat trolley, making it ready for transfer to downstream equipment such as a grinder, bowl cutter, or mixer. How does the EKOMEX RBM 500 frozen block shredder work? The machine enables the shredding of deep-frozen meat blocks without prior thawing or manual cutting, thereby reducing preparation time and labor requirements. Its robust, stable construction (weighing 1,600 kg) is engineered for reliable heavy-duty operation, while direct discharge into a meat trolley streamlines production line logistics. Manufacturer: EKOMEX Machine type: Frozen block crusher Model: RBM 500 Machine number: 10015120003 Year of manufacture: 2018 CE number: 2018/RBM50003 Power supply: 400 V, 50 Hz, 3-phase Power: 19 kW Net weight: 1600 kg Noise level: approx. 80 dB Drive: geared motor driving the crushing shaft Lrsdez S H Ubspfx Ab Asu Working tool: crushing shaft with a set of 6 blades Feeding method: gravity feed via hopper, or via transfer/conveyor belt Product discharge: directly into a meat trolley Intended use: deep-frozen meat and hard, fibrous products Controls: panel with START, STOP, and RESET buttons; READY / NOT READY and ALARM (safety protection) indicator lights; EMERGENCY STOP Safety features: safety module, limit switch for removable guards, switch sensor, hopper safety grid, motor limit switch, main switch Electrical system: Schneider Electric and Allen-Bradley components, starting system with time relay Materials: stainless steel and food-grade plastics Directives: 2006/42/EC (Machinery), 2014/35/EU (Low Voltage) Documentation: operating manual, electrical schematics, drawings, and parts list replacement parts, CE declaration of conformity

Condition: used, Quantity: 2 units available Functionally tested; item originates from the dismantling of equipment belonging to an automotive supplier. Manufacturer: SPS electronic Type: RL42-L Function: High-voltage relay for insulation and dielectric strength testing Switching voltage: up to 5 kV DC Switching current: up to 10 mA Coil voltage: 24 V DC Application: High-voltage test equipment, safety circuits Lredpfxezmm Ixo Ab Aeu

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 837172, total width: 1,300 mm, total length: 2,040 mm, total height: 1,560 mm, outer diameter of label roll: 300 mm, inside diameter of label roll: 76 mm, input voltage: 230 V, Top and bottom labeling machine 652C Machine direction of travel: from left to right, as viewed from the operator side - Equipped with the HERMA Eco labeler Labeling speed of 30 m/min - Side belts, approximately 350 mm long, for stabilizing and guiding the products Ljdpfx Absz R Uv So Asru - with mechanical unwinder, electromechanical label sensor FS03, release edge, and mechanical rewinder Further information available upon request We regularly have other demonstration machines available. We would also be pleased to invite you to our showroom to familiarize yourself with the machines during a visit or live demonstration. Please feel free to bring your own products so that we can demonstrate the application in a practical manner under your specific conditions.

Condition: good (used), functionality: fully functional, “Hein Lehmann TS 4 – 9,5” for Sale Manufacturer: Hein Lehmann Type: TS 4 – 9,5 Ledpeyhnqxsfx Ab Aoru Deck size: 4.000 x 950 mm Number of decks: 1 Included: – Frame – Electrical Motor Vibrating screen will be overhauled, sandblasted and painted.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 09/2026, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 8, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Exhaust system, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * 4-cylinder turbocharged diesel engine, 2.0 l / 130 kW (4V) * Start-stop system with brake energy regeneration * One towing eye at the front * Trailer hitch, fixed * Standard wheelbase 3,640 mm * Mud flaps at the front and rear * Fuel tank 75 l * Reinforced suspension/damping and reinforced stabilization * Approved as a 3.5t vehicle * Reinforced front axle * Permissible total weight 3,500 kg * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * Tires 235/65 R16C 115/113 R, low rolling resistance tires, tire brand not specified * All-season tires * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and CAN gateway with ABH programming * 'Climatic' air conditioning in the driver's cab * 2nd battery (AGM battery) with separation relay and battery monitoring * 2nd heat exchanger and 2nd evaporator * Daytime running lights with assist lights * LED main headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Fog lights incl. cornering lights * Side marker lights Lrsdpfx Abszc Dg Ej Asu * Heated windshield washer nozzles at the front, without windshield washer fluid level indicator, without headlight cleaning system * Step lighting * Exterior mirrors, electrically adjustable and heated * Convex exterior mirrors on the left and right, with integrated LED turn signal and wide-angle view * Normal roof * Rear step, covering half the width * Grab handles on the rear pillars * Rear wing doors with window cutouts * Rear window, heated, with rear window wiper/washer system * Radiator protection grille, black with chrome strip * Rear wing doors with increased opening angle * Windshield wiper interval control with light and rain sensor * Sliding door, right * Side window in the passenger/cargo compartment, front left, fixed * Side window in the passenger/cargo compartment, front right, fixed * Laminated front windshield with heat-insulating glazing, heated * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, one 1-DIN slot and reading light (only with 2nd evaporator) * Sun visors, foldable and pivotable to the side * Electronic parking brake * Premium interior noise damping * Glove compartment with lockable flap, illuminated * Safety interior mirror, dimmable * Leather multi-function steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders in the instrument panel * Three-point automatic safety belts with belt height adjustment and electric belt tensioners at the front * Seatbelt warning system, E-contact in the seatbelt buckle * 2 radio remote controls * Keyless Go * Water auxiliary heater, with remote control * Chrome package * Suspension seat 'ergoActive' left * Seat 'Comfort' right * Seat covers in synthetic leather 'Mesh' * Seat heating for driver and front passenger seat, separately adjustable * Digital instrument cluster * Manual regeneration of the diesel particulate filter * Tire pressure monitoring system * USB Type-C data and charging port(s) with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van * Digital radio reception (DAB+) * MAN SmartLink * MAN Connect (call services), with OCU3 low * Comfort telephony * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assistance system front and rear * Cruise con

Condition: like new (used), Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,600 mm, overall weight: 14,000 kg, Veneer stack cutting machine / Veneer shears with 4 knives Manufacturer: Monguzzi (Fisher+Rückle) Type: AFV-42-3600 Year of manufacture: 2024 Hydraulic veneer shears with 4 knives for trimming and edging veneer stacks Typical applications: Veneer mill, veneer trade, veneer cutting, furniture and interior design with solid wood veneer Cutting range: Cutting length approx. 3600 mm 4 knives (2 upper and 2 lower knives), individually selectable Hydraulic pressure beam with 2 cylinders Hydraulic pressure switchable 45 bar / 90 bar Axes and drives: Positioning axes X and X2 (left / right) with stepper motor control Axis Y with frequency inverter 1.5 kW and brake Register adjustment with frequency inverter 0.75 kW and brake Register adjustment also via foot pedal Conveyor belt Line laser Hydraulics: Hydraulic unit with tank capacity 300 l Proportional valve Filter monitoring (contamination indicator) Control: PLC control with touch panel (esaware) Manual operation, automatic cutting, parameters, diagnostics, alarm history, programming Control panel with push buttons and emergency stop Safety: Emergency stop safety relay Pilz PNOZ X3 Light curtain with safety module Datalogic SE-SR2 Two-hand operation Electrical connection: 400 V, 50 Hz, 3P + PE Current consumption approx. 22 A Fuse 25 A Control voltage 24 V DC Basic concept: - Veneer stack cutting machine with 4 hydraulically operated knives Ledpfez I Tipjx Ab Aoru - Pressure beam for fixing the veneer stack during cutting - NC positioning via the X, X2 and Y axes - Waste flaps for scrap - CE declaration of conformity according to Machinery Directive 2006/42/EC available, as well as documentation and circuit diagrams available Weight approx. 14,000 kg

Condition: used, functionality: fully functional, Year of construction: 1997, operating hours: 5,846 h, load capacity: 1,800 kg, lifting height: 4,300 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-Wheel Forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 200/50-10 Rear tire type: Superelastic Rear tire size: 15x4.5-8 Lrsdpfs Aa Eg Dsx Ab Aju Battery voltage: 48V Battery capacity: 690Ah Battery manufacturer: HSR Battery type: PzS Battery year of manufacture: 2021 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and conforms to FEM4.004. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing options are available on request at favorable terms. We will be happy to provide you with competent and comprehensive advice on our vehicles. Side shifter, 3rd valve, front work light, full free lift, interior mirror, single pedal, 3-wheel, seat.

Condition: good (used), 9 pieces, each with a circuit board Ledpfjzdktgox Ab Asru Removed from an Arburg 420 C Selogica 100 EUR per piece 600 EUR for the entire set

Year of construction: 2012, condition: good (used), Manufacturer: Hein Lehmann Liwell Type: LF 1.5 – 5.67 / 18 ED Deck size: 1.500 x 5.670 mm Lrodpfxjy A N Tfe Ab Aou Number of decks: 1 Included: – Frame – Top Cover – Electrical Motor – New V-belt pulley’s – New Rubber springs Vibrating screen will be overhauled, sandblasted and painted.

Year of construction: 2008, condition: good (used), -1Pc. Hein Lehmann Liwell Flip-Flow screen. Type : KT 1.0-3.0/12 EDS . L x W : 3.000 x 1.000 mm. . Mach-No.: 2440 . Year of Manufacture : 2008 . Komm.-Nr.: 87.0055 . With Electrical motor, Cardan-shaft and Springs . Ledpfjnykaaox Ab Ajru

Condition: used, mileage: 110,000 km, power: 120 kW (163.15 HP), first registration: 08/2019, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,980 mm, loading space length: 4,250 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: - 2nd battery (auxiliary battery) in engine compartment - Overhead storage in cab headliner - Passenger airbags - Aluminum trim at sliding door step - Tow bar: ball head, for increased trailer load - 3.5 t - 13-pin trailer socket - Electric roof ventilator II (cargo/passenger compartment) - Cargo area ceiling light with door contact - Entry handle on rear left D-pillar - Entry handle on rear right D-pillar - Tachograph controls front under roof headliner - Chassis: Stabilization level II - Transmission lock for PTO - Grab handles on A-pillars - Additional main key - Rear door (opening angle 270 degrees) - Wooden floor in cargo area - Terminal strip for electrical connections (driver's seat base) - LED cargo area light - Cable duct at rear portal - Cable duct at side wall - Multimedia system MBUX (7" touchscreen) - PTO 2 B with layshaft - Parameterizable special module - Crossmember with integrated step - Smoker package - Spare wheel with same specification as driving tires - Spare wheel carrier under rear chassis incl. jack - Amber warning beacons (2) - Reversing camera - Acoustic reverse warning (external warning signal) Lredpfx Aoy Nf T Usb Aou - Wipers with rain sensor - Off-road chassis - Seat belt warning system with alert (passenger side) - Cabin seats: passenger double seat - Cabin seats: comfort driver's seat - Engine start/stop system - 12V socket in driver's cab - Additional separating relay with extra battery - USB port middle under dashboard (charging only) - AGM battery 92 Ah - Jack - Additional rear indicator lights (roof) Further equipment: - 2 extra main keys - Overhead parcel shelf - Aluminum protective strip, floor covering, entry - Trailer hitch for increased towing capacity 3.5 t incl. 13-pin socket - Fixing rails for roof rack - Passenger airbag - Passenger double seat - Warning film application - Hill start assist - Flat indicator lamps, extra rear on roof - Electric roof ventilator II - Load space ceiling light with door contact - Constant speed control - Eco start-stop function - Entry grip on rear left corner pillar - Transmission lock for PTO - Passenger seat belt warning device - Entry grab handles for driver and passenger - Wooden floor - Terminal strip for electrical connection - Controlled air conditioning TEMPMATIK - Comfort roof control unit - Comfort driver's seat - LED light strip in load compartment - M. Becker MobiE generator offer 18022287 - M+S tires - MBUX multimedia system with 7-inch touchscreen - PTO layshaft - Parameterizable special module - Crossmember with integrated step - Smoker package - Rain sensor - Spare wheel - Spare wheel holder under end of frame - Reversing camera - Reverse warning device - Double-wing rear door, opening up to side wall - Amber warning lights front left/rear right - Rough road version - Sortimo racking system - Stabilization level II - Socket in cab - Tank sender for auxiliary heater - Additional separating relay at battery - USB socket 5V - Additional features: Interchangeable ball/pin towing coupling - Additional features: Switchable additional hot air heating - Auxiliary battery for retrofit consumers, engine compartment 3rd brake light, storage compartment above windscreen, storage compartment below dashboard passenger side, adaptive brake light, driver's airbag, hill start assist, traction control (ASR), washer fluid level display, exterior mirrors electrically adjustable and heated, both sides, outside temperature display, cab roof lining, ...

Condition: used, Year of construction: 2012, Mazak VTC-820/30 – specification Overview - Brand: Mazak - Model: VTC-820/30 - Year model: 2012 - Location: Eskilstuna Control system - Mazatrol Matrix Nexus Movements - Number of axis: 4 (X, Y, Z + 4th shaft) - X-axis: 3.000 mm - Y-axis: 820 mm - Z-axis: 720 mm - Fast transport: 50 m/min - Distance spindle nose to table: 140–860 mm Spindle and tool Lrsdpsz N An Eefx Ab Aou - Spindle effect: 22 kW - Spindle RPM: 12,000 rpm - Spindelkona: CAT 40 - Tool changer: 30 positions - Cutting fluid through the spindle: 15 bar Table - Table size: 3,500 × 820 mm - Max table load: 2,500 kg - T-slots: 7 pcs, 18 mm, pitch 100 mm 4th axle - Round Feeding Table Mazak DS50C-R1-Z, Ø 500 mm, with Roller Gear Cam - Vertical mounting on angle shelf Mazak MAZ 80090X Dimensions and weight - Machine depth: 3,700 mm - Machine height: 3,050 mm - Machine weight: 16,100 kg Equipment - Renishaw tool breakage control TRS2 - Shavings conveyor to the left, lamella conveyor with timer relay - Cutting fluid through the spindle, 15 bar - Manual rinsing nozzle - Portable pulse generator (handheld) for shoulder movements - Automatic power shutdown at end of program - 3 extra M-functions (1 pair) - Robot interface, Ethernet/IP slave - Automatic doors

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 719131, Heidelberg – GTO 52-1 Number of copies produced 8.350.000 Max-Sheet Size 360 x 520 mm (14.17 x 20.47 in) Lrodpfxsz Ny Dwo Ab Asu Max.printing Speed 8000 /h Dampening rollers –Direct Dampening Continuous-1 Ink Fountain-Laser slit blade Electric equipment- 50Hz 380 V Electromechanical and ultrasonic double-sheet detectors Powder spray-WEKO T6 Circulation and cooling -Technotrans Alfa DS Availability immediately

Condition: good (used), functionality: fully functional, Year of construction: 1994, “Hein Lehmann Liwell LF 2,0 – 6,30 / 20 DD” for Sale Manufacturer: Hein Lehmann Liwell Type: LF 2,0 – 6,30 / 20 DD Mach.No.: 1489 Year of Manufacture: 1994 Deck size: 2.000 x 6.300 mm Number of decks: 2 Lredpfx Abou Tiwgs Aju Included: – Frame – Electrical motor with console – Cardan-shaft – Rubber springs Vibrating screen can be sandblasted and painted.

Condition: good (used), 2 Pcs. “Hein Lehmann Liwell LF 1,0 – 3,78 / 12 ED” for Sale Manufacturer: Hein Lehmann Liwell Lsdpfxeyhmvyo Ab Ajru Type: LF 1,0 – 3,78 / 12 ED Deck size: 1.000 x 3.780 mm Number of decks: 1 Included: – Frame – Top cover – Electrical Motor

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Ledpfx Abey N D E Ao Asru Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 09/2026, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 8, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,726 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, * Exhaust system, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * 4-cylinder turbocharged diesel engine, 2.0 l / 130 kW (4V) * Start-stop system with brake energy regeneration * One towing eye at the front * Trailer hitch, fixed * Standard wheelbase 3,640 mm * Mud flaps at the front and rear * Fuel tank 75 l * Reinforced suspension/damping and reinforced stabilization * Approved as a 3.5t vehicle * Reinforced front axle * Permissible total weight 3,500 kg * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * Tires 235/65 R16C 115/113 R, low rolling resistance tires, tire brand not specified * All-season tires * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and CAN gateway with ABH programming * 'Climatic' air conditioning in the driver's cab * 2nd battery (AGM battery) with separation relay and battery monitoring * 2nd heat exchanger and 2nd evaporator * Daytime running lights with assist lights * LED main headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Fog lights incl. cornering lights * Side marker lights * Heated windshield washer nozzles at the front, without windshield washer fluid level indicator, without headlight cleaning system * Step lighting * Exterior mirrors, electrically adjustable and heated * Convex exterior mirrors on the left and right, with integrated LED turn signal and wide-angle view * Normal roof * Rear step, covering half the width * Grab handles on the rear pillars * Rear wing doors with window cutouts * Rear window, heated, with rear window wiper/washer system * Radiator protection grille, black with chrome strip * Rear wing doors with increased opening angle * Windshield wiper interval control with light and rain sensor * Sliding door, right * Side window in the passenger/cargo compartment, front left, fixed * Side window in the passenger/cargo compartment, front right, fixed * Laminated front windshield with heat-insulating glazing, heated * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, one 1-DIN slot and reading light (only with 2nd evaporator) * Sun visors, foldable and pivotable to the side * Electronic parking brake * Premium interior noise damping * Glove compartment with lockable flap, illuminated * Safety interior mirror, dimmable * Leather multi-function steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders in the instrument panel * Three-point automatic safety belts with belt height adjustment and electric belt tensioners at the front * Seatbelt warning system, E-contact in the seatbelt buckle * 2 radio remote controls * Keyless Go Lredpfx Absxyntis Aeu * Water auxiliary heater, with remote control * Chrome package * Suspension seat 'ergoActive' left * Seat 'Comfort' right * Seat covers in synthetic leather 'Mesh' * Seat heating for driver and front passenger seat, separately adjustable * Digital instrument cluster * Manual regeneration of the diesel particulate filter * Tire pressure monitoring system * USB Type-C data and charging port(s) with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van * Digital radio reception (DAB+) * MAN SmartLink * MAN Connect (call services), with OCU3 low * Comfort telephony * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assistance system front and rear * Cruise con

Condition: used, Year of construction: 2002, machine/vehicle number: 6243, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Base machine / travel ranges: X-axis machine stand 5,000 mm, Y-axis spindle head slide 2,100 mm, Z-axis spindle head 1,500 mm. Machine stand: Compact, torsion-resistant welded construction with hardened flat guide rails and telescopic steel covers to protect against chips and coolant. Spindle head slide: Cast iron design with hydraulic weight compensation, guided by combined roller/plain bearing guides. Machine bed: Flat bed design with approximately 1,200 mm guide rail width and roller compact guides for high precision. Automatic universal milling head: CNC-swiveling milling head arbor 340 x 1°, Hirth gearing approximately 125 kN; milling head 180 x 1°, approximately 100 kN; milling spindle with hydromechanical tool quick-change system, clamping force approximately 25 kN; tool holder SK 50, DIN 69871. Main drive: 37 kW at 100% ED, 53 kW at 40% ED; externally ventilated AC motor, 2-stage gearbox with automatic changeover; speed 22–4,000 1/min. Feed drives: Digital AC individual drives; X/Y: 2–12,000 mm/min, Z: 2–15,000 mm/min. Ledpoz Dvycsfx Ab Aeru Control system / measuring systems: Central operation via Heidenhain TNC 430 M. Direct, non-contact linear measuring systems. Optional: Heidenhain iTNC 530. Electrical system: EN 60204 / VBG 4, 400/230 V ±10%, 3 phases, 50 Hz, 24 V control voltage; connected load approximately 80 kVA. Control cabinet IP54, main motor IP55. Lubrication: Main gearbox / milling head drive oil circulation lubrication; main spindle grease long-life lubrication; guides / ball screws pulse central lubrication. Coolant: Internal / external coolant supply with paper band filter. Max. 50 l/min at 10 bar or 47 l/min at 16 bar; tank 500 l. Coolant / air changeover. Oil cooler for temperature stabilization and increased manufacturing accuracy. Leveling system: Electromechanical, via 2 vertical ball screws with separate drives, measuring systems, and CNC axes. Working platform: Moves in the X direction, with CNC control panel; electrically secured door with viewing window. Pick-up station: 10 tools; max. tool weight 25 kg, length 400 mm, Ø 125 mm, with free adjacent slots Ø 250 mm. Clamping plate: 3,500 x 3,000 mm; T-slots 22 H12 DIN 650, spacing 250 mm; clamping surface accuracy class 1 DIN 876. CNC rotary table: Clamping surface 1,250 x 1,600 mm / Ø 1,800 mm; Hirth division 360 x 1°; 6 longitudinal slots 22 H12, 2 positioning slots 22 H7; T-slot spacing 160 mm; centering bushing Ø100 H7 x 20 mm; max. 5 1/min; tilting moment 85,000 Nm; tangential moment 120,000 Nm; table load max. 11,500 kg. Additional equipment: Oriented spindle holder 360 x 1°; hinged band chip conveyor for X=5,000 mm, feed width approximately 350 mm, discharge height approximately 1,250 mm; 3D touch probe; electronic handwheel HR 410 for 3 axes; pendulum machining for 2 work areas with monitored safety areas; manually adjustable splash guard. Collision monitoring: Brankamp CMS with piezoelectric strain gauge; if the process limit is exceeded, the axes are braked and the machine is switched off. Painting: Machine / control cabinet RAL 7035, milling head / spindle head RAL 5021; DD structured paint, semi-gloss, oil and alkali resistant. Power connection: 400 V, 3 phases, 50 Hz, 80 kVA, 160 A slow-blow; compressed air 4–6 bar, connection G 1/4. CE-relevant environmental protection to be provided on-site; adapter plates for chip / coolant return are not included. Coordinate information: Y 730.0124. Documentation: Operating manual SHW-UF6L and Heidenhain TNC

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 08/2026, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 8, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * TGE 3.180 4X2F SB Panel Van * 8-speed automatic transmission, front-wheel drive * Reinforced suspension/damping and reinforced stabilizer bars * Disc brakes front, 16" * "ergoActive" driver's seat with suspension * "Comfort" passenger seat * Seat covers in synthetic leather "Mesh" * Heated driver and passenger seats, separately adjustable * Stone chip protection without Efficient Line (no CO2 optimization) * Comfort Package Plus * Daytime running lights with assistant driving lights * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Fog lights incl. cornering light * Side marker lights * Heated windshield washer nozzles front, without windshield washer fluid level indicator, without headlight cleaning system * Step lighting * Headliner in the passenger compartment as a molded headliner * Entry handle made of plastic on the B-pillar in the passenger compartment * Child safety lock, electrically operated * Side interior paneling in the cargo area made of hard fiberboard, half-height, with partial window paneling * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assist front and rear * Cruise control * Traffic sign recognition * Rear view camera system with dynamic guide lines * Driver alertness and fatigue detection * Side wind assist * Active lane keeping assist * Intelligent speed assist * With multifunction camera * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and KFG with ABH programming * Alternator 230 A * Air conditioning system "Climatic" in the cab * 2nd battery (AGM battery) with separator relay and battery monitoring * 2nd heater and 2nd evaporator * One towing eye front * Trailer hitch, fixed * Wheelbase standard 3,640 mm (L3) * Mud flaps front and rear * Fuel tank 75 l * MAN SmartLink * MAN Connect (call services), with OCU3 low * Comfort telephony with inductive charging function, without external antenna connection * Fire Red (R3000) * Exhaust system, EU6e (EC) * Front-wheel drive * 4-cylinder diesel engine 2.0L, aggregate 03N.G * Automatic transmission, 8-speed * 4-cylinder turbo diesel engine 2.0 l/130 kW (4V) BIT * Start-stop system with brake energy recovery * Country cluster "WLTP EU approval" * Airbags for driver and passenger, with passenger airbag deactivation * Roof console with storage compartments, one 1-DIN slot and reading light (only with 2nd evaporator) * Sun visors, foldable and swiveling to the side * Electronic parking brake * Premium interior noise damping measures * Glove compartment with lockable flap, illuminated * Safety interior mirror, anti-glare * Leather multifunction steering wheel, heated with Tiptronic Lredpozc Dgxjfx Ab Aju * 12-V socket and 2 cup holders in the instrument panel * Three-point automatic safety belts with belt height adjustment and electric belt tensioners front * 12-V sockets in the cab * Belt warning system, E-contact in the belt lock, driver and passenger seat * 2 remote key fobs * Keyless start * Auxiliary water heater, with remote control * Chrome package * USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van * Digital radio reception (DAB+) * Exterior mirrors, electrically adjustable and heated * Exterior mirrors left and right convex, with integrated LED turn signal and wide-angle area * High roof, painted in vehicle color (H3) * Rear step, over half the width

Condition: used, “functionally tested; item originates from the dismantling of equipment from an automotive supplier.” Manufacturer: ASO Safety Solutions Type: 41-322 (ELMON relay) Category: Safety evaluation unit / safety relay (ELMON family) Lredozr Ucuepfx Ab Aju Function: Evaluation of safety contact mats, safety edges and bumpers; monitoring of sensor current; support for 4-wire sensors Connections / Operation: Terminals / LED display for status; operating instructions and connection examples in the manual Protection class / Mounting: for control cabinet / inline mounting