Used Eisele Vms-I-S for sale (85,388)

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm cutting area at 90° round: 90 mm Csdpfxem Twgwj Afmegw cutting area at 90° square: 75 x 75 mm cutting area in mitre at 45° square: 75 x 75 mm disk rotations: 40/80 upm engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, saw blade diameter: 120 mm, O F F E R We can offer you the following ex stock, subject to prior sale and errors excepted, without obligation: EISELE Vertical cold circular saw with mitre cut Type VMS II – 350 PV Year of manufacture 2010 _____ Max. saw blade diameter 350 mm Saw blade speeds 40 / 80 rpm Workpiece diameter 90 mm Swivel range of saw table 0 – 90 degrees Continuously adjustable pneumatic feed 0 – 10 (?) Approx. weight 350 kg Features: • Adjustable workpiece length stop, mounted on the right - Max. adjustable length: 500 mm • Pneumatic workpiece vice – clamping width 160 mm • Minimum quantity coolant system (MMKS) for saw blade Cjdsyub N Uepfx Afmjgw • Adjustable depth stop

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm Csdpfx Afox Avtvjmsgw cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Codpjf Dwa Uofx Afmjgw Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1998, dimensions of saw-blade 350 x Ø 40 x 3 mm cutting range 120 mm capacity 90 degrees: square 100 x 100 mm capacity 90 degrees: flat 170 x 100 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 95 x 95 mm capacity 45 degrees: flat 120 x 100 mm capacity 60 degrees: round RE 100 mm capacity 60 degrees: square RE 85 x 85 mm capacity 60 degrees: flat RE 85 x 100 mm work height max. 900 mm Cgsdpfx Ajxabk Uefmjw saw blade turning speeds 17 / 34 U/min compressed air 6.0 - 8.0 bar total power requirement 1.4 / 1.9 kW weight 340 kg range L-W-H 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with the smallest footprint (less than 1 m²) - Machine base - Operation manual (PDF) Machine with factory new spare parts (installed): 1x cylinder Pneu/HydrDoppelw.D80HUB190 for saw blade lowering 1x gas spring Hub100 D23 F=800N for safety hood

Condition: excellent (used), Year of construction: 1999, O F F E R We can offer you, subject to prior sale and errors excepted, the following ex stock, without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Model: VMS 370 Year of manufacture: 2000 Max. saw blade Ø: 370 mm Cutting capacity: - Pipes approx. up to 130 mm - Flat material: 200 x 100 / 140 x 100 mm - Solid material (square): 120 mm Cgjdjx A H Rrjpfx Afmow Note: For mitre cuts, cutting capacities may be somewhat reduced—up to max. 140 mm. Saw carriage stroke, manual, vertical approx.: 200 mm Saw blade speeds: 17–34 rpm Saw blade drive approx.: 2/2.6 kW Total drive approx.: 3 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories/Special features: • Adjustable saw head for mitre cuts at 30° / 45° / 90° via scale • Pole-changeable three-phase motor with max. 2.6 kW drive • Manual feed of saw carriage with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant system with chip collection tray • Roller conveyor material feed approx. 2,000 mm • New saw blade installed, 2 spare saw blades included • Electrical system recently overhauled Ideal machine for locksmithing and metalworking shops. Condition: Very good – ready for demonstration – very smooth running Delivery: Ex stock, as inspected Payment: Net, strictly after receipt of invoice We look forward to your order. We also have larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Further saw machines always available—please enquire.

Condition: new, Available from stock / available in the short term! Speed: 17/34 rpm. For saw blades up to 350 mm in diameter. With pole-changeable three-phase motor, 1.4/1.9 kW, stationary base frame with integrated coolant system and chip drawer. Cutting range: Flat 90° 170 x 100 mm Csdpfx Afollvpwomogw Flat 45° 120 x 100 mm Flat 30° 85 x 100 mm (only to the right) Square 90° 100 mm Square 45° 95 mm Square 30° 85 mm (only to the right) Round 90° 120 mm Round 45° 120 mm Round 30° 100 mm (only to the right) Technical data: Length 895 mm Width 665 mm Height 1750 mm Weight 300 kg Table height 900 mm Options: Roller conveyors and length measuring devices (image = example, available in manual and automated versions, upon request) We recommend our coolant concentrate, which has been tried and tested for "Eisele" saws for decades, our microspray oil (for machines with a microspray system), as well as high-quality circular saw blades and band saw blades for your specific needs. Feel free to contact us for a non-binding quote!

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Cgsdpfezinzrjx Afmsw Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition

Condition: used, Year of construction: 1989, saw blade diameter 350 mm cutting diameter 115 mm capacity 90 degrees: flat 200 x 80 mm turning speeds 1700/3400 U/min saw-blade dia. 350 x 3.3 x 40 mm motor 400 Volt total power requirement 1.8 / 2.6 kW weight ca. 600 kg Cgjdpfx Afjxabw Uemjw range L-W-H 1000 x 850 x 1500 mm - Inspected condition - Machine video - ?v=k-VA1e8rSJI Features: - Semi-automatic aluminum circular saw - Pneumatic material clamping - Infinitely variable adjustment of the saw head lowering speed - Machine table with miter adjustment - Machine base frame * without material stop as shown in the pictures

Year of construction: 2000, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Cgjdpfxezfkwbs Afmjw Material stop: swiveling 30° - 90° - 45° Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. Csdpfxsyyz Ebe Afmegw If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. Codpfx Aeyyzxhofmsgw 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: good (used), Year of construction: 1993, Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, Double miter saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: swivels 45° -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm Cgjdpotxkprofx Afmjw -Weight: 1200 kg

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. Cjdpsu Nigksfx Afmsgw i.D. *

Year of construction: 2009, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Codoywtqdepfx Afmsgw Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Material stop adjustable with detent points and display on the display Program control for automatic adjustment of the punch height, the angle, and the punching height Up to 6 programs can be stored Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Year of construction: 2006, condition: good (used), for processing aluminium and PVC profiles in facade and structural construction Mitres in 3 planes, also suitable for use as a compound crosscut saw Processing of profiles up to 300 mm width at 90°, sharp mitres up to 30° Notching depths horizontally up to 185 mm and vertically up to 230 mm at 90° Notching width at 90°: 300 mm, profile height up to 280 mm Motorised height adjustment for notching, positioning with electronic digital display Cgedpfxeyz T A Us Afmow Saw blade swivel range vertical 60° - 90° - 25° (front/centre/rear), motorised positioning with electronic digital display Saw blade swivel range horizontal with vertical blade 45° - 90° - 45°, motorised positioning with electronic digital display

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: EcoPurge30, pneumatic purging pump for 2K-metering pump max. flow: 6l/min max. pressure: 21MPa pressure ratio: 30:1 Cgodpfx Aepz H Hqefmjw

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fully automatic operation Drive 7.5 kW, S6, 400 V, 50Hz, 2850 rpm For use with saw blades D 550 mm Cutting range 270x140 mm (width x height), D 185mm Max. profile width 270mm Control unit with display Including piece counter Including reversing device for a maximum cut length of 3000mm Automatic shut-off via limit switch when material ends Hydropneumatic saw blade feed, continuously adjustable, from bottom to top Vertical and horizontal clamping units, on both infeed and outfeed sides of the saw head Pneumatic dosing spray device Cutting gap extension on both sides of the saw blade Electronic material feed unit 3-600mm feed length, with ball screw spindle and servomotor Including pneumatic horizontal and vertical clamping device Remnant piece from 75mm, depending on profile Cgsdpjyvtyvjfx Afmow 2 extraction ports D 100 mm Safety guard over the saw head and feed unit A suitable extraction system can also be offered!

Year of construction: 1996, condition: good (used), machine/vehicle number: 9182, Offer 23168 Technical data: - Notching possibilities + miters in 3 planes - right-angled, one-sided + two-sided + three-sided oblique . Csdpfxomb U E As Afmjgw - Can be used as a shift cut crosscut saw - Pneumatic profile clamping Machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3,5 x 40 mm positive - horizontal 500 x 3,5 x 40 mm negative - notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. positioning with digital display - Swiveling range saw blade horiz. with vert. saw blade Saw blade - 45° - 90° - 45° mot. positioning with digital displays - Notching height adjustment with digital displays - profile stop shoulder manually tiltable 30° - 90° - 45° - pneumatic coolant check device - air connection 6 bar - drive 400 V / 2 x 3 kW - space requirement approx. W 2400 x H 2000 / D 1400 mm - weight approx. 1200 kg

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm Cgedpfxstq Take Afmjw - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Condition: good (used), Static Mixer, Disposable Mixer, Plastic Spiral Mixer -Manufacturer: tsi, Static mixer SULZER QUADRO MGQ 10-19D 15 pieces -Version with Luer-Lock attachment for dispensing needles -Industrial standard connection can also be used for other cartridge systems -Thread: MGQ Series 7/8" - 9 UNC coarse thread Cjdpfxju Aifts Afmsgw -Quantity: 3 bags with 15 pieces each available -Distribution/Price: per bag, minimum order 2 bags -Bag dimensions: 190/130/H40 mm -Weight: 0.2 kg/bag

Year of construction: 1997, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Cgodpfsx Ecg Usx Afmow Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Year of construction: 1999, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Cgsdpfovmz R Sex Afmew coolant lubrication

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Cgjdpfx Aowfg E Dsfmsw

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 550,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. Csdpfx Afjvtarnemogw The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display.