Used E. Bickel Hk3/61 for sale (70,286)

Condition: used, mileage: 926,538 km, power: 210 kW (285.52 HP), first registration: 09/2006, fuel type: diesel, number of seats: 37, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typographical errors, and prior sale: Mercedes Benz Citaro (emergency seats) (Vehicle 155) First registration: 08.09.2006 926,538 km Engine: 6,374 cc 210 kW / 286 hp Euro 5 EEV MOT valid until 01/2027, technical inspection valid until 10/2026 Gujdpfx Afez H Ecrs Tsh Permissible gross vehicle weight: 19,000 kg, unladen weight: 11,340 kg, payload: 7,660 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front: 80% remaining tread, rear: approximately 30/30% remaining tread, inner tires: approximately 40/40% remaining tread Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microwave Manual windows 2 x electric and heated mirrors Auxiliary heating + 2nd heating Retarder Stop brake LAWO system connected to the cash register Emergency stop 12-volt socket Tie rods corroded 14.02.2024: Alternator tensioner replaced, 07.05.2025: Radiator replaced, water pump sealed, 07.04.2026: Upper control arms on the front axle (left and right) replaced, 26.07.2024: Brakes and discs on the front axle replaced, both brake chambers on the front axle replaced, 29.10.2024: Pressure switch for the air system, circuit 1+2, replaced with air line, 24.01.2025: Four-circuit pressure valve replaced Various signs of wear and tear, consistent with the vehicle's age Last inspection: 21.01.2025 at 873,162 km, next inspection due at 933,162 km Price: 3,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are reserved.

Condition: used, machine/vehicle number: 04 897, consisting of: Rinser 15 Nozzles Guedjz Sdp Rspfx Af Tsh Vacuum filler 16 Filling valves Screw capper 3 heads 22 mm screw cap

Condition: used, mileage: 1,104,124 km, power: 309 kW (420.12 HP), first registration: 03/2006, fuel type: diesel, number of seats: 61, gearing type: mechanical, next inspection (TÜV): 01/2027, emission class: euro4, color: white, brakes: retarder, Year of construction: 2006, Equipment: ABS, air conditioning, bathroom, navigation system, parking heater,

Condition: used, maximum load weight: 32,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2012, loading space length: 10,500 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 61 m³, Year of construction: 2012, Equipment: ABS, Air suspension, 1st and 2nd axle lift, BPW disc brakes, EBS, SmartBoard, aluminum rims, support jacks, PVC half-shell fenders, aluminum toolbox, extension ladder, fixed UFS made of aluminum, lateral AFS on both sides, sliding floor, front wall made of 40 mm aluminum-wood profiles, side walls made of 30 mm aluminum-wood profiles, sliding wall, resting hydraulic rear wall, gangway with ladder, PVC roll-up tarpaulin with central locking, loading pressure gauge, retarder, cargo area lighting. Guodpfx Afezx I E As Toh

Condition: used, functionality: fully functional, This is a condensation trap from the manufacturer Rational. The condensation trap is suitable for the Rational combi-steamer series, iCP 61-102, SCC/WE 102 & CPC, SCC 102, 210, 202. The condensation trap creates an accelerated rise of steam and other gases from the vent pipe. Steam and gases can thus be directed in a targeted manner via a pipeline to an exhaust system. You will receive an invoice with VAT shown. OUR USED EQUIPMENT SERVICE FOR YOU: High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Testing according to DGUV V3 Technical data: Dimensions: W x D x H 10 x 7.5 x 45.8 cm Weight: 1.3 kg Connection diameter: 6.5 cm Application: iCP 61-102, SCC/WE 102 & CPC, SCC 102, 210, 202 Article numbers 60.72.592 Material: Stainless steel / CNS 1.4301 / AISI 304 Gjdpfoy T Ibcjx Af Teuh Condition: used SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1624x950x2345 mm Weight 0 kg Total power requirement 1,5 kw Guodpfsvz El Nox Af Tsh

Condition: used, functionality: fully functional, This is a condensation trap manufactured by Rational. The condensation trap is suitable for the Rational SCC/WE 61/62/101 combi-steamer series, as well as for CM/P 61/62/102. The condensation trap creates an accelerated rise of steam and other vapors from the vent pipe. Vapors and gases can thus be directed via a pipeline to an exhaust system. You will receive an invoice with VAT shown. OUR USED EQUIPMENT SERVICE FOR YOU: High-quality branded equipment at fair prices Professional refurbishment / inspection & expert cleaning Checked & fully functional Flexible options for shipping or self-collection Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Guodey T Ia Ejpfx Af Tjh Testing according to DGUV V3 Technical data: Dimensions: W x D x H 10 x 7.5 x 45.8 cm Weight: 1.3 kg Connection diameter: 5.5 cm Application: SCC/WE 61/62/101 as well as for CM/P 61/62/102 Article numbers: 60.72.591 Material: Stainless steel / CNS 1.4301 / AISI 304 Condition: used SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday, 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Surface Grinding Machine HARIG Super 612 - No 1 Travel X: 300 mm Travel Y: 170 mm Travel Z: 250 mm Grinding wheel: Ø 200 mm Spindle motor: 3600 RPM Manual movement X - Y - Z Manual magnetic tray 345 mm x 145 mm Auto lubrication axes X and Y Delivered with 2 new grinding wheels 1 vacuum cleaner Voltage: 380 V Width: 1400 mm Gujdjz Iz T Aspfx Af Teh Depth: 1500 mm Total height: 1900 mm Weight: approx 1 T

Condition: used, Year of construction: 2007, Amada punch press EMK 3610NT including MP300 loading unit for sale. We would like to sell the machine as a complete package with tooling and a Wilson X-Sharp grinding machine. Gedpfxsw Hww He Af Touh The standard tools are listed in the attached inventory. I can send it to you via email.

Year of construction: 2013, condition: used, Weights Empty weight: 750 kg Functional Lifting capacity: 200 kg Lift height: 1.590 cm CE mark: yes Condition General condition: good Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 7,65x1,59 Production country: DE Additional information Gujdpoz Ryybsfx Af Tjh Please contact Christian Theißen for more information Manufacturer: Emminghaus Model: Pionier 85-6-16 Year of build: 2013 Condition: Used Data: Max. lifting height: 15,90 m bei 85° Lifting capacity: 200 kg Platform dimensions LxW: 1,25 x 0,90 m Platform dimensions extended LxW: 2,08 x 1,32 m Support width: 4,00 x 4,00 m Transport dimensions LxW: 7,65 x 1,59 m Weight: 750 kg Special features: can be rotated on chassis, ball-head coupling.

Condition: used, mileage: 883,130 km, power: 340 kW (462.27 HP), first registration: 05/2007, fuel type: diesel, number of seats: 61, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: white, brakes: retarder, Year of construction: 2007, Equipment: ABS, air conditioning, bathroom, parking heater,

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed Gedsxdmgvspfx Af Touh We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Year of construction: 2002, condition: used, This listing is for the Ehret STE 1610/2/100 Sterilising Oven. The unit is in full working condition and is ready for immediate use. Overview The Ehret STE 1610/2/100 Sterilising Oven is a high-performance dry heat sterilizer designed for reliable and consistent sterilization of laboratory and pharmaceutical materials. Manufactured by Ehret, a trusted German brand in thermal processing equipment, the STE 1610/2/100 delivers precise temperature control and robust performance, making it ideal for applications requiring sterilization without moisture, such as glassware, metal instruments, and heat-stable laboratory components. Key Features Precise Dry Heat Sterilization High-Temperature Range: Operates up to 250 °C, suitable for complete sterilization and thermal decontamination. Uniform Temperature Distribution: Advanced air circulation ensures even heat distribution throughout the chamber. Validated Sterilization Cycles: Ideal for sterilizing glass, metal tools, and other heat-resistant materials with accuracy and repeatability. Robust Construction & Ergonomic Design Durable Stainless Steel Chamber: Corrosion-resistant and easy to clean, suitable for repeated sterilization cycles. User-Friendly Controls: Digital temperature controller with display for accurate setpoint adjustment and monitoring. Safety Features: Over-temperature protection, door interlock, and visual/audio alarms for enhanced operational safety. Technical Specifications Model: STE 1610/2/100 Temperature Range: Ambient +5 °C to 250 °C Chamber Volume: Approx. 100 litres Heating Method: Electrically heated with forced air circulation Temperature Control Accuracy: ±1 °C Construction: Stainless steel inner chamber; powder-coated steel exterior Control System: Digital PID controller with safety cut-off and time functions Power Supply: 230 V / 50–60 Hz (depending on configuration) Applications Pharmaceutical Laboratories: Dry sterilization of vials, stoppers, and instruments Medical Facilities: Sterilizing surgical tools, metal parts, and reusable components Research & Diagnostics: Sterilization of labware and experimental setups Industrial & QA Labs: Heat treatment, drying, and thermal conditioning of materials Guodpfjxhflxsx Af Teh System Components Electrically heated drying/sterilization chamber Forced air circulation fan for uniform heating Digital control panel with setpoint and actual temperature display Safety thermostat with alarm system Removable shelving for flexible loading Quality Assurance All Ehret STE ovens are manufactured in compliance with DIN and ISO standards and undergo rigorous quality testing at the factory. Designed for reliable long-term use, the units support calibration, validation (IQ/OQ), and GMP documentation where required. Benefits Reliable Sterilization: Proven performance across thousands of cycles Accurate & Uniform Heating: Ensures consistent results and safe sterilization Low Maintenance: Durable components and easy-to-clean surfaces Safety-Compliant: Built with laboratory and industrial safety standards in mind Compact Footprint: Fits easily into lab or cleanroom environments Conclusion The Ehret STE 1610/2/100 Sterilising Oven is a dependable, precision-controlled dry heat sterilizer built for modern lab and pharmaceutical environments. Its combination of German engineering, validated performance, and operator-friendly design makes it a trusted solution for high-integrity sterilization processes.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,630 h, load capacity: 1,600 kg, lifting height: 2,400 mm, free lift: 1,250 mm, fuel type: electric, mast type: duplex, construction height: 1,700 mm, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,134 kg, total height: 1,700 mm, total length: 2,000 mm, total width: 800 mm, fuel: electricity, JUNGHEINRICH EJC 216 115-240 ZZ – Electric pedestrian stacker Gjdpfxez R T N Rs Af Touh TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 2.400 mm Closed height: 1.700 mm Free lift: 1.250 mm Mast: Duplex (2F240) Fork length: 1.150 mm Drive: Elektro Battery: 24 V/375 Ah (2012) Charger: ohne/without Service weight: 1.134 kg Length: 2.000 mm Width: 800 mm Year of manufacture: 2012 Operating hours: 3.630 h Condition: working condition Internal no.: 1308738 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, machine/vehicle number: 1187333, sweeping width:60 cm Capacity:1800 Watt Gjdpfxjcxxtzj Af Touh dimensions of the machine ca.:0,60 x 1,20 x 0,95 m

Condition: new, empty load weight: 630 kg, maximum load weight: 1,970 kg, overall weight: 2,600 kg, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 900 mm, tire size: 165r13, Product information "UNSINN WEB-DK3017-26-13-E 2600kg 306x175x85cm Grated sides, three-way tipper" Three-way tipper with a corrugated grating superstructure from trailer manufacturer Unsinn, model WEB-DK3017-26-13-E. Made in Germany! This flatbed trailer, designed as a three-way tipper, is equipped with electric hydraulics for tipping. The folding and removable side walls allow for easy loading of the trailer from the side and rear using a forklift, wheel loader, or by hand. A welded, hot-dip galvanized steel frame makes the tipper trailer very stable. The tipper with grated sides is equipped with folding and removable side walls, a solid steel floor, electro-hydraulic system, automatic support wheel, lashing eyes, welded hot-dip galvanized frame, rail system, and a very stable V-drawbar. Godpfx Afeg Un Dze Tsuh For an additional charge, tipper accessories such as side wall extensions, tarpaulin and frame, flat tarpaulin, net, box, loading ramps, and supports are available. ----- With us, you can also get: · Financing · Leasing (for commercial customers only) · Consultation · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repair · TÜV inspection for car trailers Car trailer center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: ready for operation (used), Indramat CLM 01.3-X-E-4-B / 248680 servo controller SN: 248776-11393 - without display, used, in good condition, fully functional, scope of delivery as shown in photos. Gedpox Etvvjfx Af Tsuh

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 782 kg, maximum load weight: 1,918 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 Three-sided tipper + Integrated aluminum loading ramps + electric tipping control NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 1974kg Braked tandem axle trailer Overrun brake and handbrake by AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Integrated aluminum loading ramps in the ramp compartment, 2.8t load capacity Electric tipping control 12V 95Ah AGM battery Electronic tipping limiter Plug + socket for charging Aluminum profile side panels with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wooden floor Additional steel plate on the wooden floor Automatic support wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin plug LED marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber Large tipping angle of 49 degrees backwards Lateral tipping by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS loading ramp Gujdpfx Afjzxr Sme Toh OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side panels (price reduction) -Black Edition (Powder-coated side panels and rims in black) -35cm side panels -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on the tilted vehicle -Folding crank rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tensioning latch -Flat cover with or without bow -High cover 160cm - 200cm More accessories available upon request! plus freight to Gera and vehicle registration certificate 250 € net Pictures are for example purposes only and may show optional accessories that incur an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. A wide selection of rental trailers can be found with us. Visit us online or come by!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-25, empty load weight: 886 kg, maximum load weight: 2,614 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,560 mm, loading space width: 1,840 mm, loading space height: 350 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 356 184 3500 2E with electric operation and integrated aluminum loading ramps NEW VEHICLE Internal dimensions: 356cm x 184cm Side panel height: 35cm Loading platform height: 75cm Total weight: 3500Kg Payload: 2614Kg Braked tandem axle trailer Overrun brake and parking brake by AL-KO Largest possible axle and brake Low chassis Fully welded, hot-dip galvanized steel frame 35cm aluminum profile side panels with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on the wood floor Automatic support wheel with 400Kg support load 8 noise-reducing lashing eyes with 800Kg pulling force Reinforced 13" C tires with steel valve Gedjzv T Uqspfx Af Touh M+S tires Net/rope hook on the frame 13-pin connector LED marker lights at the front Rear lamps with reversing light and triangular reflectors Upper frame mounted on rubber bearings Large tilting angle of 41 degrees to the rear Lateral tilting by repositioning the safety pins Electric tilting operation with connector for charging the 12V battery Electric limitation of the tilting angle to the side U-rail for attaching the original SARIS loading ramp Integrated aluminum loading ramps 2800Kg OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side panels (price reduction) -Black Edition (Powder-coated side panels and rims in black) -Extended tilting angle to 52 degrees (5-stage cylinder) -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on the tilted vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tensioning latch -Flat cover with or without a bar -High cover 180cm or 200cm Further accessories on request! Plus freight to Gera and vehicle registration document 250 € net Images are for illustrative purposes and may show optional accessories at an extra cost. Haven't you found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. You will find a wide selection of rental trailers with us. Visit us online or come directly!

Condition: ready for operation (used), Siemens 1FT5046-1AG71-4EB0 3-permanent magnet motor, serial number: E LD88 7626 01 015 + angle encoder 6FX2001-2EB50 R6/9920192, used, in good condition, 100% functional, delivery as per photos. Gjdpfx Afewyrflj Teuh

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Godpjvvi Rfefx Af Touh

Condition: used, Year of construction: 2013, operating hours: 13,672 h, total height: 2,450 mm, total length: 5,000 mm, total width: 2,200 mm, Empty weight: 9.000 kg - Year: 2013 - Documentation available: Yes - CE marking present: Yes Gujdpfxoyzzrko Af Toh - Serial number: 1237361A51A - Operating hours: 13672 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Fanuc - Control system type: 0-MD - Power [kW]: 11.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 610 - Y-axis travel [mm]: 430 - Z-axis travel [mm]: 570 - Table length [mm]: 650 - Table width [mm]: 450 - Tool holder: BT40 - Main spindle power [kW]: 15 - Max. spindle speed [rpm]: 10000 - Options: Tool magazine, Chip conveyor, Spindle cooling, Pallet milling machine, Exchange table, External cooling - └ Tool magazine [pcs.]: 24 - Transport dimensions: 5000mm x 2200mm x 2450mm (l x w x h) - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Siemens 1FT5046-1AK71-3EG0 3-Permanent Magnet Motor, serial number: E L390 5245 02 002, used, in good condition, 100% fully functional, scope of delivery as per photos. Gsdpewyrfrsfx Af Tsuh

Condition: used, ---- Fixed installation Bolt: 80/70 Shaft: 320 Axle: 400 with torque motor Gsdpfxszkz Saj Af Touh

Condition: like new (used), functionality: fully functional, How do you do? Gusdpfxevby U So Af Toh We are offering used and compatible clamping devices from Erowa. These are suitable for die sinking and milling. Here are some of the available parts: ER-008617 Plug gauge ER-010723 Control mandrel ITS 50 ER-010561 Replacement probe pin ø 2mm ER-010560 Replacement probe pin ø 5mm ER-093992 Square 25 holder C F-Tool holder with square 25 ER-010592 Square 25 Alignment ruler ER-010495 Square 15 alignment ruler ER-129072 Uniplate Collet holder ø 72 ER16-ER50 Table probe with magnetic base 3D probe ø1-5 Steel pallet ø148mm All parts have been cleaned and checked by us. A functional test was also carried out. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.