Used Dynomill Bead Mill for sale (9,834)

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition Tedpfjq Ngafsx Amyea A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: new, Year of construction: 2026, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Tsdoq I Nw Iepfx Amysa

Condition: new, functionality: fully functional, Year of construction: 2026, Cement Mill & Ultrafine Grinding Mill 🏗️ Introduction to Cement Mill & Ultrafine Grinding Mill In the world of construction and materials processing, achieving the right particle size is essential. Introducing the Cement Mill and Ultrafine Grinding Mill—two pivotal machines designed to deliver superior grinding performance for cement production and ultrafine materials. Let’s dive into their features and applications! 💼 🔥 What is a Cement Mill? A Cement Mill is a crucial piece of equipment in cement production. It grinds clinker, gypsum, and other additives to produce fine cement powder. This machine ensures the optimal particle size for high-quality cement, essential for building robust structures. 🚀 🔧 What is an Ultrafine Grinding Mill? An Ultrafine Grinding Mill is designed to produce extremely fine powders from various raw materials, such as minerals, chemicals, and industrial waste. It operates at high efficiency, delivering ultra-fine materials for advanced applications like coatings, plastics, and ceramics. 🌟 💼 Key Benefits of Using Cement Mill & Ultrafine Grinding Mill 1. High Efficiency: Both mills are engineered for maximum efficiency, ensuring rapid processing times and reduced energy consumption. 🌿💡 2. Superior Grinding Performance: Achieve consistent, high-quality output with precise control over particle size. 🏭 3. Versatility: Suitable for a wide range of materials, making them essential for various industrial applications. 🌳 4. Durability and Reliability: Built with robust materials, these mills offer long-lasting performance in demanding industrial environments. 💪 📈 Applications in Industry Cement Mill Applications: Tjdpfx Amjq Nyydoysa 1. Cement Production: Essential for producing high-quality cement for construction projects. 2. Infrastructure Development: Used in creating concrete for roads, bridges, and buildings. Ultrafine Grinding Mill Applications: 1. Mineral Processing: Producing ultra-fine powders for advanced material applications. 2. Chemical Manufacturing: Used in creating fine chemicals for various industrial processes. 3. Environmental Applications: Grinding industrial waste for recycling and reuse. ♻️ 🌟 Conclusion Whether you’re in construction, materials processing, or advanced manufacturing, the Cement Mill and Ultrafine Grinding Mill are indispensable tools. Their efficiency, versatility, and superior performance make them a valuable addition to any production line. Contact us today to learn more about these innovative machines and how they can revolutionize your operations! 📞

Condition: new, fuel type: electric, Year of construction: 2026, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Max input size: 25mm Capacity:35-60 t/h Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. 5. Grinding Media: - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. 6. Liners and Lifting Aids: - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. Tedeq Igiiepfx Amyea - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications.

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. Tsdpfx Aoq Nf Uwjmysa 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Tedpey Iyw Sofx Amyja

Condition: like new (used), 1 unused universal vertical milling head, suitable for an ORADEA / EURO-MILL FUS 32 Design: “MAHO”, ISO 40 shank, quill stroke 100 mm, designed drive power approx. 3-4 kW, max. speed 2000 rpm, … Optional accessories: - Multiplier, gear ratio 1:4, ISO 40 shank Price: EUR 499.00 - Attachment for automatic feed device for the vertical milling head quill, “MAHO” system, 6 feeds 0.02 - 0.2 mm/rev Price: EUR 1,880.00 - Cross milling head, additional head for the vertical milling head with spindle taper ISO 30, rotatable, 360 degrees Price: EUR 585.00 plus statutory VAT. Tjdpfx Amjddtwbeyoa Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm Tjdpfx Ajwi S Ixemysa finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: used, Universal Tool Milling Machine ORADEA EURO-MILL STIMIN (Romania) Model FUS 32 Serial No. 5591 Year of construction: 2009 Travel: X: 560 mm, Y: 320 mm, Z: 400 mm Table size: 950 x 450 mm Tool holder (vertical head): ISO 40 - M16 Tool holder (horizontal spindle): ISO 40 - S20x2 (Deckel-compatible) Spindle speed: 25-2000 rpm, 18 steps Feed rate: 5-400 mm/min, 18 steps Rapid traverse: 1400 mm/min Main spindle motor power: 3 KW Electrical connection: 400 Volt, 50 Hz, 10 KW - 3-axis digital readout and linear glass scales by HEIDENHAIN, type ND 780 - Vertical milling head with quill, swivels +/- 90° - Quill travel at vertical head: 100 mm - Manual tool clamping with M16 thread - Counter bearing for horizontal milling with Ø 48 mm bearing bush - Central lubrication - Electrical control cabinet mounted on machine side - Coolant system integrated in machine base - Machine lamp - Including 2 tool holders - Operating manual with electrical diagram Required space (L x W x H): 1800 x 1600 x 1800 mm Weight: 1650 kg Very good condition Todpox Hkd Hsfx Amyea

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Tsdpfxjt Ixkze Amyja Maximum Inlet Wire's Diameter: 30 mm

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, travel distance X-axis: 5,020 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 100 mm, controller model: Heidenhain 415 B, TECHNICAL DETAILS Spindle diameter: 100 mm Travel in X-axis: 5,020 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 2,000 mm Tjdpfxjzlryqs Amyja Tool holder: SK 50 MACHINE DETAILS Control system: Heidenhain 415 B Rotary table dimensions: 2,500 x 2,000 mm EQUIPMENT Indexable milling head 2.5 60-position tool changer Rotary table manufacturer: Scharmann Note: The rotary function of the rotary table is defective. The machine is sold without pallet changers.

Condition: used, Year of construction: 2007, operating hours: 39,215 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 4,000 rpm, controller model: Fanuc 18i-MB, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,100 mm Table dimensions: 2,700 × 850 mm Table load capacity: 6,000 kg Spindle connection: ISO 50 – DIN 69871 AD Spindle power: 22/26 kW Spindle speed: 60–4,000 rpm Gear stages: 2 Working feed rate: 20 m/min Rapid traverse rate: 10 m/min Axes: A- and B-axes Division: 2.5° MACHINE DETAILS CNC control: Fanuc 18i-MB Coolant pressure through the spindle: 23 bar Machine weight: 16 t Operating hours: 39,215 h EQUIPMENT Automatic 2-axis swiveling head for the A- and B-axes Two-stage spindle gearbox Coolant supply through the spindle at 23 bar Note: The functionality of the spindle cooling system was not tested prior to the auction. Tjdpjzmw I Aofx Amyea A surcharge of €500 will be applied for the necessary equipment if container loading is required.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 3,000 rpm, workpiece weight (max.): 5,000 kg, TECHNICAL DETAILS Travel in X-axis: 2,000 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 1,100 mm Maximum workpiece weight: 5,000 kg Clamping area (L x W): 2200 x 850 mm Number of T-slots: 5 Width of T-slots: 22 mm T-slot spacing: 150 mm Feed rate in X/Y/Z axis: 10,000 mm/min Rapid traverse rate in X/Y/Z axis: 20,000 mm/min Spindle speed: 60 - 3,000 rpm Swivel range of the milling head: -180°/+177.5° Positioning of the milling head angle: Automatic in the A+B planes Positioning accuracy: ±0.014 mm Repeatability: ±0.008 mm Ball screw diameter in X/Y/Z axis: 63 mm Ball screw pitch in X/Y/Z axis: 16/10/10 mm Tjdpfszmfn Dox Amyoa MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Motor power: 38 kW Power of the hydraulic unit: 1.8 kW Operating pressure of the hydraulic unit: 110 bar Capacity of the hydraulic unit tank: 100 l Delivery rate of the hydraulic pump: 9 l/min Power of the cooling unit: 1.36 kW Air pressure: 6–7 bar Air flow rate: 50–225 l/min Power supply: 400 V; 50 Hz Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,000 x 2,900 mm Total weight: 14,000 kg EQUIPMENT Two-stage spindle speed control

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 917, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Todszl Ubkjpfx Amyja Spindle type: Z80-K530.04 Drive type: SIE / HD MACHINE DETAILS Power: 24.5 kW Voltage: 230 / 400 V Frequency: 50 Hz Motor type: SERVO EQUIPMENT CE marking Measuring probe Tool holders (as shown in the picture)

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 4,000 rpm, controller model: Heidenhain 407, No minimum price – guaranteed sale to the highest bidder! Todpfx Aszpxfhsmyja TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 420 mm Spindle speed max.: 4,000 rpm Tool holder: SK 40 Distance from spindle to table: 127–567 mm Spindle diameter in the front bearing: 55 mm MACHINE DETAILS Control system: Heidenhain 407 EQUIPMENT Handwheel Network connection

Condition: ready for operation (used), operating hours: 46,652 h, functionality: fully functional, machine/vehicle number: 661227, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, power: 5.5 kW (7.48 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm Spindle speed range: 40 – 4,000 rpm Todpfxezpxfbe Amyja Spindle connection: ISO 40 Table surface area: 900 x 480 mm MACHINE DETAILS Spindle power: 5.5 kW Operating hours: 46,652 h Machine weight: 2,900 kg EQUIPMENT Digital position display Millplus CNC

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, pivoting range: 45 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 400 mm Todszpwydepfx Amyea Spindle speed range: 25 – 6,300 rpm Swivel range, vertical milling head: +45° Clamping surface, vertical: 300 x 450 mm Number of threaded holes: 2 x 6

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 300 mm, table length: 450 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 400 mm Work table surface area: 300 x 450 mm Number of threaded holes: 2 x 6 Tedpjzpwx Hofx Amyoa

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, quill stroke: 80 mm, overall weight: 3,900 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Tsdjzpwxyepfx Amyea Travel in X-axis: 800 mm Travel in Y-axis: 700 mm Travel in Z-axis: 550 mm Vertical quill travel: 80 mm MACHINE DETAILS Machine weight: 3,900 kg EQUIPMENT Rotary table

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, DN Solutions PUMA GT3100L – 2023 Model Tjdpfx Amszpwgqoyea 12-inch chuck CNC lathe Fanuc CNC control Hydraulic tailstock Hydraulic steady rest Maximum turning diameter: 481 mm Maximum turning length: 1,280 mm Bar capacity: 102 mm Maximum spindle speed: 2,800 rpm Heavy-duty box guideway construction Suitable for precise machining of long and heavy workpieces Chip conveyor Coolant system Automatic lubrication system

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2507, Used CNC bed milling machine / traveling column milling machine with automatic tool changer and swivel head. Manufacturer: TIGER S.p.A. (Italy) Type: TFA 5 RT Year of manufacture: 2002 Serial number: 2507 The "RT" designation at Tiger indicates a version with a rotary table or 5-axis machining capability. Heidenhain CNC control (probably TNC 426 or TNC 430) Automatic tool changer Tool magazine Tiger TFA 5 RT ISO 50 tool holder Tjdpszffnuofx Amyja Swivel milling head Bed-type machine with a large working area Full enclosure Tool changer Weight 650 kg Connection 400 V / 50 Hz Power output 45 kW Maximum current 80 A Technical data X-axis travel 2,500 mm Y-axis travel 1,200 mm Z-axis travel 1,200 mm Table size 1,000 x 1000 mm Tool holder ISO 50 Spindle speed 2,500 rpm Main drive 45 kW Number of tool positions 60 Machine weight 12,000 kg

Condition: used, Brand and Model: CORREA CF 22/25 Cnc: HEIDENHAIN TNC 426 Type: BED TYPE Table dimensions: 2500x700 mm Max allowed weight on table: 4000 kgs Traverses (X,Z,Y): 2500x800x800 mm Milling head model: U22 manual Tsdpfx Aezq Rzqemyoa Spindle cone: ISO 50 Speed range: 4000 rpm Power: 22 kw Feedrates: 5-5000 mm/min Rapid traverses (X,Y,Z): 12000 mm/min Machine weight: 9500 kgs Machine dimensions: 6400x3345x2800 mm Machine equipped with: -Optical encoders on the X,Y,Z axes – Electronic wheel – Hydraulic cone clamping pedal

Condition: like new (used), Year of construction: 2001, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 2500 x 700 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mmY axis traverse: 800 mmZ axis traverse: 800 mmVertical capacity (VC): 22 / 822 mm Milling head Head type: Manual universal long nose head (Option: new automatic milling head UDG 2,5º)Tool clamping system: HydraulicTaper nose: ISO-50 (DIN 2080)   /   Pull stud: DIN 69872Speed range: 4000 rpmSpindle power: 22 kW Feedrates Working feedrate: 5 - 5000 mm/minRapid feedrate (X,Y,Z): 12000 mm/min Weight and dimensions Maximum weight on table: 4000 kgMachine weight approximate: 9500 kgMachine dimensions approximate: 6605 x 3315 x 2730 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceElectronic handwheel: New HR-510Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Todjzq H Ugjpfx Amyja

Condition: defective spare-parts repository (used), Year of construction: 1986, functionality: not functional, total height: 3,000 mm, total length: 5,400 mm, total width: 2,900 mm, overall weight: 8,600 kg, Sale from Bremen location Manufacturer Mazak Power Center SV-12 with Mazatrol CAM M – 2, with tool changer for 30 tools, with grooved clamping table and other accessories The machine is defective and is explicitly sold as a source of spare parts. The exact defect is the absence of the control board. However, many components are still complete and can be used as spare parts. A test run is not possible. Year of manufacture 1986 Technical data Travel distances X/Z-axis approx. 1250 mm, Y-axis approx. 550 mm Control system Mazatrol Cam M-2 Table size 1300 x 500 mm Max. table load approx. 800 kg Travel distance X-axis 1250 mm Travel distance Y-axis 550 mm Travel distance Z-axis 550 mm Spindle mount BT 40 / SK 40 Spindle speed max. 400 – 6000 rpm Tool changer 30 tools Drive power 11 kW Weight 7000 kg Tedpfx Amszq H A Dsyoa L x W x H 360 x 300 x 295 cm

Condition: excellent (used), Year of construction: 2022, operating hours: 2,963 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 235 mm, bar passage: 42 mm, total height: 1,700 mm, total length: 2,220 mm, total width: 1,460 mm, overall weight: 3,100 kg, Miyano BNA-42 DHY3 CNC turning center, manufactured in 2022, in very good and fully functional condition. The machine is immediately ready for operation and has only 2,963 operating hours. HIGHLIGHTS - 2 spindles: main spindle and sub-spindle - 2 turrets - Y-axis on the upper turret - Driven tools Tedow Igyrspfx Amyea - Max. bar diameter, main spindle: 42 mm - Max. bar diameter, sub-spindle: 34 mm - Kraft & Bauer fire protection system - Extraction system - Knoll chip conveyor TECHNICAL DATA Main spindle - Max. bar diameter: 42 mm - Travel: 100 mm - Spindle speed: 6,000 rpm - Spindle motor power: 7.5 / 5.5 kW - C-axis resolution: 0.001° Sub-spindle - Max. bar diameter: 34 mm - Spindle speed: 5,000 rpm - Spindle motor power: 5.5 / 3.7 kW - C-axis resolution: 0.001° Upper turret - 8 stations - X-axis travel: 140 mm - Z-axis travel: 235 mm - Y-axis travel: 70 mm (+/- 35 mm) - Speed of driven tools: 5,000 rpm - Power of driven tools: 1.0 kW Lower turret - 6 stations - X / Z-axis travel: 140 / 310 mm Electrical supply - Total connected load: 30 kVA Dimensions and weight - Footprint: 2,220 x 1,460 mm - Machine height: 1,700 mm - Machine weight: approx. 3,100 kg The machine is located at our facility in Hornberg. Further information and additional images are available upon request.