Used Durst Rhotex 325 for sale (847)

Condition: used, 325L bowl capacity blad shaft motor power 120 kW/306 A (AC) Bowl motor power 3.7 / 4.4 kW - 8.2 / 8.8 A Ejection motor power 1.5 kW - 3.5 A Ibedpfx Apozvbxwocjb Hydraulic pump motor power: 2.2 kW - 5.0 A blade shaft fan motor: 0.3/1.2 kW - 1.5/4.4 A Other: 3 kW - 8 A Total power: 133 kW - 337 A Temperature measurement Operating voltage: 400 V / 50 Hz Control voltage: 24 VDC / 230 VAC Control: Cut Control Pro 2-speed turntable Product ejector (right) Knife cover Bowl cover Automatic lubrication Loader for Eurobins 200L (left) Weight: ± 5.390 kg Water connection 1" / 3-4 bar Air connection DN6 / 6 bar For dimensions, see the attached PDF.

Condition: ready for operation (used), functionality: fully functional, The machine is ideally suited for the precise cutting of solid materials, tubes, and profiles made of steel, stainless steel, and non-ferrous metals. The NC control allows recurring cutting tasks to be performed efficiently and reproducibly. The robust industrial design makes the saw the ideal solution for locksmiths, steel constructors, and general mechanical engineering. Technical data Manufacturer: BEKA-MAK Type: BMSO 325 Machine type: Horizontal metal bandsaw Design: NC-controlled semi-automatic Cutting type: Straight cut 90° Saw blade: approx. 34 × 1.1 × 4,110 mm Infinitely adjustable band speed Hydraulic saw feed Hydraulic workpiece clamping Coolant system Cutting capacities at 90° Material size 340x340mm Equipment NC control Hydraulic material clamp Automatic saw feed Coolant system Chip brush Material stop Robust industrial design 7 saw blades included Ibodszwd E Nspfx Apcjb The bandsaw is in used condition and comes from an ongoing operation. Inspection and a test run are possible by appointment.

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Isdpfov Tp D Hox Apcobb Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: good (used), Modular unit, finishing unit, grinding unit, grinding station, belt sander, belt sander, edge sander, edge sanding machine, profile grinding unit, small belt sander -Belt sanding unit: from belt sanding machine -Type: unfortunately no type designations -Drum motor: Perske type DKAL 2117/2 3.7 kW 2840 rpm Ibedpfxszrfb Us Apcob -Roller: Ø 183 x 370 mm -Rollers: Ø 117 x 325 mm -Individual components: see photos -Transport dimensions: 1110/560/H300 mm -Weight: 195 kg

Condition: excellent (used), Double side - First (1st) machine in a line Machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 195 / 1500 Numerical Control /Software Power Control 22 / woodCommander Ibjdpfszrd Nqsx Apcob Adjustable feeding speed (m/min) 15 - 32 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Rough Trimming unit BF10 (2 x Kw 0,55) Fine Trimming unit PF20 (2 x Kw 0,4) FRRE SPACE Milling grooving unit UF 11 (1 x Kw ?) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: as good as new (ex-display), 4-SIDE EDGE BANDING LINE + DRILLING Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: Iedpszrd Dhsfx Apcebb 202005a) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFL 325/ M1 / C 202005b) Turning Station "HOMAG" Mod. TDL (from lengthwise to crosswise) 202005c) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. KFL 326/ M2 / C 202005d) Connecting Roller Conveyor 202005e) Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 503

Year of construction: 1988, condition: ready for operation (used), A Krämer & Grebe rotary cutter is available. Bowl volume: 325l, knife speed: 3000rpm, knife peripheral speed: 120m/s, steam pressure: 2-4bar, steam temperature: 120°C-150°C, cooking temperature: 65°C-85°C, cooling temperature: 45°C-50°C, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2050mm, weight: approx. 4300kg. Including accessories such as knives, plastic parts and assembly wrench. The machine is dismantled and the control cabinet and the motor are located in the hall. An on-site inspection is possible. Isdpoyypl Asfx Apcjbb

Condition: used, functionality: fully functional, machine/vehicle number: 91138630, Year of construction: 2019, operating hours: 12,607 h, load capacity: 2,500 kg, lifting height: 6,950 mm, free lift: 2,400 mm, mast type: triplex, construction height: 2,950 mm, fork length: 1,200 mm, drive type: Lithium-Ionen, Reach truck Chassis number: 91138630 Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Polyurethane Rear tire type: Polyurethane Battery type: Lithium-ion Description: Maintenance performed + safety inspection completed Ibsdpfxjztt S Rj Apcsb Side shifter, fork positioner, Weighing scale, safety light, Fork camera, lift height indicator

Condition: used, functionality: fully functional, machine/vehicle number: 91138631, Year of construction: 2019, operating hours: 11,602 h, load capacity: 2,500 kg, lifting height: 6,950 mm, free lift: 2,450 mm, mast type: triplex, construction height: 2,950 mm, fork length: 1,150 mm, drive type: Lithium-Ionen, Reach truck Chassis number: 91138631 Iedpfxeztt S Dj Apcjbb Load centre: 600 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery type: Lithium-ion Description: Newly serviced and UVV inspected Sideshifter, fork positioner, Scale, safety light, Fork camera, lift height indicator

Year of construction: 2009, condition: good (used), Rebuilt: 2009 Built in: 1989 Size: 457 x 292 mm Speed: 6.000 c/h Iedpfodyk Rrjx Apcobb

Condition: ready for operation (used), Heidenhain UM 114 ID 325 005-12 SN15160246, used, in good condition, 100% functional, delivery as per photos, professionally fully overhauled and tested with 3 months' warranty, 100% functional, delivery as per photos. Ibodpfx Asx Etdgjpcob

Condition: ready for operation (used), Heidenhain UM 114 ID 325 005-12 SN15160246, professionally fully overhauled and tested with 3-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange procedure, your defective exchange part must not show any mechanical damage such as fractures, as these cannot be repaired. In such cases, an additional charge of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain UM 114 ID 325 005-12 SN15160246 under the exchange service. The unit is professionally fully overhauled and tested, with a 3-month warranty and guaranteed full functionality. Scope of delivery according to photos. For both repair and exchange services, your returned part must be free from mechanical damage such as breakages, as these are irreparable. If such damage is found, a surcharge of €1,000 incl. VAT will be invoiced. Ibjdpjx Etdmjfx Apceb

Condition: good (used), Year of construction: 1991, Used Hosokawa MikroPul filter Ibjdpsufy S Hofx Apcjb Model Type 8 HP VC 1200-325 Volume 9980l Weight 2200kg

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: TR0071_ALM-RD 325, NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD325 Type: ALM-RD325 incl. 2 x air filters Delivery quantity: 5.08 m³ / min * Compressed air connection 1 1/2 " Dimensions L x W x H: 555 x 505 x 874 mm Weight: 83 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Ijdpfx Apshu Sb Rscjbb Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: excellent (used), 4-SIDES LINE of Double-side Sizing and Edge Banding. Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: KZ0400a) Infeed table "HOMAG" Mod. TBL 100/25/12/S with motorized rollers Adjustable feeding speed 7-40 m/min KZ0400b) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 325/M1/C Isdpfx Apjiztxyjcobb Adjustable feeding speed 15-40 m/min - with PC 22 SIZING: Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Grooving Unit UF11 (Kw 4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) KZ0400c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) Adjustable feeding speed 20-60 m/min KZ0400d) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 326/M2/C Adjustable feeding speed 15-32 m/min - with PC 22 SIZING: Anti-chipping (1xKw 4,5), Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: End-trimming HL84 (2xKw 0.22), Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Contour Trimming (Corner rounding) FF32 (4 x Kw 0.4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) MINIMUM EDGE LENGTH 70 MM (Part thickness for narrow parts max. 25 mm, Edge thickness max. 2 mm, Cycle speed: max. 20 T/min, Feed rate max. 20 m/min.)

Condition: used, Year of construction: 2021, operating hours: 2,230 h, CAT 325, year of manufacture 2021, with only 2,230 operating hours. In top condition. Operating weight approx. 28,500 kg Engine: Cat C4.4 turbocharged diesel, engine output 128.5 kW (172 hp) Displacement: 4.4 liters Emissions standard: EU Stage V Iodszg S Abopfx Apcjbb Fuel tank capacity: approx. 313 liters Hydraulic system capacity: approx. 230 liters Max. digging depth: 6.70 m Air conditioning CE marking

Condition: excellent (used), Kontron 325 Tenary Low-Pressure Gradient Pump HPLC up to 10 mL - Pump system for tenary low-pressure gradients - All low-pressure gradient devices integrated into one solution system - 10 programs with customized instructions - Column shock protection extends shelf life - Intelligent compressibility compensation - Stackable with other/additional HPLC modules - Full control of the AUtosampler 360 via the keypad with a display Type: Double series-piston wetted Materials: SS 316, PTFE, KEL-F, ceramic, ruby, and sapphire Flow rate: 0.05 to 10 mL per minute Flow rate precision: 0.3% RSD (at 1.5 mL/min) Flow rate accuracy: 2% (at 1.5 mL/min) Flow linearity: r2 > 0.998 Pressure: 40 MPa or 7500 psi (flow-dependent) Ibodpfx Ajlkbptspcjb Pressure sensor: Piezoelectric sensor Display: 2x40-character LCD External control: RS-232C Inputs: Injection synchronization, flow stop Outputs: Pressure and drive alarm, pressure signal, relay injection, relay step, RS-232 (for Autosample 360) Power supply: 110/220 V +-10%, 50/60 Hz, 120 VA Dimensions: 40 cm wide, 54 cm deep, and 17 cm high Find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 302/0252, Used CFS CUTMASTER cutter from 2010. Isdjzaaw Ujpfx Apcobb For videos and more information, please contact me.

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 20 x 100 mm Ibedpfxewc Ry Ho Apcjb -Dimensions: 325/198/H222 mm -Weight: 22.1 kg

Condition: good (used), Flexible extraction arm for welding smoke filter, welding smoke extraction Iedpfx Asvck Hzopcobb -Welding fume extraction pipe: flexible -Tube: Ø 325 mm -Total length: 2300 mm -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg

Condition: good (used), Geared motor, electric motor, three-phase motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 1x motor available -Dimensions: 400/230/H230 mm Iedpfx Ajckbg Njpcjbb -Weight: 24 kg

Condition: used, Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: Clamping aid for workpiece clamping -Bridge thickness: 16/18 mm -Dimensions: 325/247/H115 mm -Weight: 13.7 kg Iodpfek Egk Nex Apcobb

Condition: good (used), Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Steel, lever shears, sheet metal shears with stable base Isdpfx Aolb Iwmopcsbb -Cutting length: approx. 325 mm -Overall dimensions: 840/560/H2075 mm -Total weight: approx. 131 kg

Condition: used, Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve -Maintenance unit: with stable bracket -Outputs: 2x individually lockable -Pressure: Max. 10 bar / 150 PSI -Dimension: 390/325/H520 mm Ibsdpfskahkvjx Apcob -Weight: 16 kg

Condition: used, Bezel, stick, lynette -Max. Diameter: 325 mm -Tip height: 405 mm -Edition: ball bearings Ibedpsd Nhivsfx Apcob -Drawing: in the photos -Dimensions: 780/140/H845 mm -Weight: 97 kg