Used Droop & Rein Machining Center for sale (69,184)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 15744, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, table load: 1,500 kg, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Table length: 1,000 mm Table width: 560 mm Table load: max. 1,500 kg Spindle connection: HSK63 Tool changer: 30 positions Rapid traverse rate: 35 m/min Acceleration: 5 m/s² MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,500 x 2,800 mm Weight: 7,200 kg Total connected load (including cooling unit): 42 kVA Isdpfozcymzex Afkjth

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Itsdszcuyijpfx Afkoh Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,297 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! In January 2025, a new spindle was installed by the manufacturer! The machine has been regularly maintained! Previous use: The machine was primarily used for precision machining. Roughing operations were only carried out to a limited extent. TECHNICAL DETAILS Travel range X-axis: 2,800 mm Itsdpfszb D Aqjx Afksh Travel range Y-axis: 2,200 mm Travel range Z-axis: 800 mm Feeds Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) Vertical: 10,000 rpm Spindle speed S1 (continuous operation) Universal swivel head 2-axis: 18,000 rpm Vertical milling head: TVS 10,000 Swivel milling head: TU 18,000 Tool holder: HSK 63 A Tool changer: 40 tool positions MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (-15 %, +10 %) Frequency: 50 Hz Current consumption: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 99,222 h Program run time: 61,297 h EQUIPMENT High-rigidity gantry design Precise linear guides and ball screws Generous working area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Swiveling milling head with 4th/5th axis Maintenance and service documentation

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on schedule in week 30 of 2026! TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Itodpfszd Tapsx Afkoh Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600 mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600 mm tools Balluff writing/reading system NC table Absolute scales in X, Y, and Z Renishaw MP10 measuring probe Tool breakage monitoring MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel in X-axis: 2,500 mm Travel in Y-axis: 920 mm Travel in Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Shipping packages: 3 EQUIPMENT Itsdpfjzdkhkox Afkoh External coolant system Chip conveyor Tool magazine (30 pieces)

Condition: ready for operation (used), Year of construction: 2009, operating hours: 3,275 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine with only 3,275 spindle hours! TECHNICAL DETAILS Travel in X-axis: 1,100 mm Travel in Y-axis: 600 mm Travel in Z-axis: 510 mm Ijdpfx Aszdkgajfkjth Table size: 1,300 x 600 mm T-slots: 6 (size 18) Maximum table load: 1,000 kg Spindle speed range: 60 - 12,000 rpm Drive power: 10 / 17 kW Spindle mounting: ISO 40 / DIN 69871A Magazine: 32 positions MACHINE DETAILS Drive power: 10 / 17 kW Internal cooling (IKZ): 20 bar Coolant tank volume: 480 l Spindle hours: 3,275 h Machine operating hours: 15,883 h Control operating hours: 17,706 h

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 216327, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel range, X-axis: 1,660 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table length: 2,000 mm Table width: 510 mm Tool holder: ISO40 Max. spindle speed: 12,000 rpm Ijdszdf Dhepfx Afkoth MACHINE DETAILS Control system: Mazatrol 640M Operating time according to control system display: 40,843 h Dimensions & Weight Dimensions (L x W x H): 5,120 x 3,000 x 2,800 mm Unladen weight: 8,250 kg EQUIPMENT Chip conveyor Tool magazine with 30 positions Tools included

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min Itsdpfx Afeyr Utnjkeh _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2005, operating hours: 40,300 h, machine/vehicle number: IntNr231576, A used AXA VSC-1M/2E CNC vertical machining center, manufactured in 2006 and equipped with a HEIDENHAIN iTNC 530B CNC control, is for sale. Technical data Design: Moving column machine Number of axes: 3 axes Machining operations: Milling, drilling, threading Operating mode: CNC operation Swivel machining Tool holder: SK 40 Tool magazine Chip conveyor Coolant system X-axis travel: 1,760 to 9,000 mm Y-axis travel: 550 mm Z-axis travel: 600 mm Distance from table to spindle nose: 180 to 780 mm Table surface: X-travel + 400 mm x Y-travel, 3 T-slots 14 H9, T-slot spacing 160 mm Table load: 800 kg/m² Rapid traverse: 30 m/min The standard tool changer has 22 tool positions; optional extensions up to 216 tool positions are possible. Tool change time: approx. 4 seconds. Iodpfxszatgps Afksth The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale.

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm Itedpfxsx Hllxo Afkeh - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1999, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 430 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 Itjdpjzfqgvofx Afkjh table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 60 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T

Condition: used, Year of construction: 1998, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 426 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg Itodszfqgpspfx Afkeh number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T - ICS

Condition: used, Year of construction: 2015, CNC machining center Manufacturer: Chiron Type: FZ 12 W Magnum Year of manufacture: 2015 CNC control: Siemens 840D solution line Travel ranges: X/Y/Z = 550 x 400 x 360 mm Spindle speed: 15,000 rpm Tool holder: HSK63 Internal coolant supply Ijdpfjzfppcsx Afketh Rotary table Integrated workpiece changer 32-position tool changer Glass scales Chip conveyor Laser control for breakage monitoring 19626

Condition: used, overall weight: 1,500 kg, This deck-type Maho milling machine, model: type: MH 700 C, will be auctioned off online in our industrial auction / machine auction by Kusch+Co GmbH – including painting booths – milling and drilling machines – industrial sewing machines – grinding machines – workshop and office equipment. You can find this and many other items on our platform. Ijdjzfig Ispfx Afkjth

Condition: used, Year of construction: 1985, This Chiron CNC vertical machining center, type: FZ16L CN, will be auctioned off online in our industrial auction / machine auction by Kusch+Co GmbH – including painting booths, milling and drilling machines, industrial sewing machines, grinding machines, and workshop and office equipment. Isdpfxezfid Ho Afketh You can find this and many other items on our platform.

Condition: good (used), Year of construction: 2012, 5-Axis CNC Machining Center Manufacturer: AXA Machine Model: VPC-2800U Control System: Siemens Year of Manufacture: 2012 Technical Specifications Working Area - X travel vertical (mm): 3,900 - Y travel (mm): 2,940 - Z travel (mm): 1,100 CNC Rotary Table Iedszfhdxspfx Afketh - Clamping area (mm): ø 2,800 Feed Drive - Max. rapid traverse speed in X/Y/Z (m/min): 30/30/25 Working Spindle - Standard drive No.: 140 Spindle speed range (rpm): 30-7,500 Spindle power max. duty cycle 100% (kW): 63 Spindle torque max. duty cycle 100% (Nm): 191 Tool holder: SK50 Swivel Head - Swivel range B-axis (degrees): 90 - Indexing: freely interpolating Tool Changer - Tool stations: 60 Please note: The machine is NOT equipped with a turning function. Changes and errors in the technical data and information excepted.

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives • BA 4 per traveling column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit Itedpfx Afezfg S Ueksh • Short delivery time, immediately available – subject to prior sale – Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Iedpfx Aezfg Rksfksth Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column Ijdpfezfg Rdsx Afkjth - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!!!

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm - Siemens 840 DsL CNC control - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations - Chip conveyor - Internal/external air blow-off device - Minimum quantity lubrication for dry machining of castings - Full enclosure - Large interference circle 2300 mm - Double pallet changer Itodezfg Nyspfx Afkoh - Short delivery time, subject to prior sale - Year of construction: 2010 Coolant supply available as an option - ICS 60 bar for deep hole machining

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Worktable TV with 10 supports L=1500 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Iodex Twd Hjpfx Afksth Location: Nattheim

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Iedpfx Afjy Dta Sokjth

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Itsdex Twdyspfx Afksh

Condition: used, Year of construction: 2006, · Working area: 2,650 x 1,240 mm · X-Y travel: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm C-axis deactivated – 3-axis machine The base structure is a monolithic construction made of thick-walled steel. It is reinforced throughout the entire machine bed with welded-in triangular plates, which makes it extremely stable. The use of the triangle shape with a broad base for load-bearing parts is the key to lasting precision and stability. The machine layout allows the operator an optimal workflow despite minimal space requirements. The resulting base frame thus provides the machining unit with a balanced and secure foundation, ensuring excellent load distribution. The mobile unit carrier is built as a solid monoblock. It is positioned in X-direction on ground prismatic guides with recirculating ball carriages. The working unit is again mounted on ground prismatic guides and a recirculating ball carriage on this mobile unit carrier. Description of aggregates and accessories (basic equipment) Drilling unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm Itsdpfx Ajx Twccjfksh · Drill interface: M 10 with 11 mm fitting Grooving saw unit in X: · Integrated in drill head · Grooving saw blade with max. diameter 120 mm Main milling unit (Position 2): · Tool holder HSK 63F · Speed: 1,500 - 24,000 rpm stepless via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power 6.6 kW (9 HP) from 12,000 rpm (S6) · Clockwise/counterclockwise rotation · Ceramic bearings · Includes: 4 pcs. tool holders (right) without collet Tool changer R8L: Automatic tool changer for 8 tools. Mounted on the rear unit carrier for quick tool access. · Number of tool stations: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight all tools: 22 kg · Holder for 1 angle gear · Moves in X direction Horizontal milling unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm stepless via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (for saw D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. front milling tool diameter: 20 mm · Max. front milling tool length: 110 mm · Max. rear milling tool diameter: 12 mm · Max. rear milling tool length: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade arbor diameter (ER 20): 12 mm Work table: The work table is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system provides maximum flexibility for precise positioning and optimal holding of workpieces. · 6 supports, 1000 mm, steplessly adjustable pneumatically in X direction · 12 round vacuum cups D = 110 mm, steplessly adjustable in Y (2 pcs. per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · Retractable reference stops are CNC controlled · Pendulum machining standard (2 work zones) --- other clamping systems available as options --- Axis movement: The drive system in X, Y and Z is via ground recirculating ball screws...

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. Isdjyuw Sropfx Afketh The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.