Used Dübi-Tech Ag Gm for sale (11,183)

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Fuel: natural gas Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gas operating pressure: 8 kPa Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C TNV temperature: 930 °C Usable volume: 4.3 m³ Njdpfxoycvxme Afaela If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement Nodpfx Afeyt Ihbsaela The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Condition: ready for operation (used), * Brand: Siebtechnik Njdpeywmxbefx Afajla * Type: 20/35-1 * Surface : 3500 x 2000mm - 1 decks * Driving: 11 kW E-motor.

Condition: ready for operation (used), * Brand: dbr Fördertechnik * Type: Ellipse horizontal Nlodpfx Aeywmw Rofaja * Surface: 5000 x 1600 mm – 2,5 decks * Driving: 18,5 kW E-motor.

Condition: ready for operation (used), * Brand: dbr Fördertechnik Njdeywmw Depfx Afaola * Type: Ellipse horizontal * Surface: 6000 x 1800 mm – 2 decks * Driving: 18,5 kW E-motor.

Condition: ready for operation (used), * Brand: Siebtechnik * Type: HG * Surface: 3000 x 1200 mm - 2 decks Nlodpsywl Rpsfx Afaoa * Incl.: 11 kW Motor.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Nledpfx Asywg Sbefaoa Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, functionality: fully functional, Year of construction: 2026, degree of automation: manual, working width: 2,040 mm, bending angle (max.): 135 °, overall weight: 1,295 kg, total length: 2,500 mm, total width: 770 mm, total height: 1,100 mm, Segment Bending Machine 2040 mm / 2.5 mm – robust and precise sheet metal solution Nedpsyx Ua Nsfx Afaola The segment bending machine with a working width of 2040 mm is an efficient and versatile device designed for precise sheet metal bending in workshops and industrial production. Thanks to its solid construction and the use of high-quality materials, the machine ensures reliability, accuracy, and ease of operation. The upper clamping beam is made of high-grade steel, guaranteeing wear resistance and long service life even under intensive use. The machine is equipped with 13 bending segments, divided into 5 different widths (2 x 7.5 mm; 2 x 10.3 mm; 3 x 12.7 mm; 3 x 15.3 mm; 3 x 20.2 mm), allowing flexible adjustment to various workpieces and enabling more complex bending operations. The bending angle range of 0° to 135° allows for a wide range of applications, from simple to more demanding parts. The maximum sheet thickness of 2.5 mm ensures versatility while maintaining high precision. Thanks to its stable construction with a weight of 1295 kg and dimensions of 2500 x 770 x 1100 mm, the machine operates smoothly without vibrations, ensuring high-quality results. Technical specifications: Working width: 2040 mm Max. sheet thickness: 2.5 mm Bending angle: 0° – 135° Segments: 13 pcs (5 widths) Dimensions: 2500 x 770 x 1100 mm Weight: 1295 kg Key advantages: ✔ high bending precision ✔ durable high-quality steel construction ✔ segmented design – maximum flexibility ✔ stable and reliable operation ✔ ideal for workshops and serial production

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: PFEIFER technology, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, pipe diameter (max.): 160 mm, pipe length (max.): 7,500 mm, table length: 6,500 mm, type of input current: three-phase, type of cooling: water, compressed air connection: 13 bar, overall weight: 5,500 kg, total length: 14,800 mm, total width: 2,900 mm, total height: 2,525 mm, warranty duration: 24 months, year of last overhaul: 2026, working range: 7,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Centre 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 Profile and Tube Laser | Fiber Laser Metal Cutting for fast material change with up to 6kW — the smart and efficient tube laser processing solution for your production! Designed for round tubes, square tubes, rectangular tubes, open profiles, and special profiles. This laser cutting machine delivers maximum productivity, especially during production changeovers. The task: fiber laser up to 6kW for a wide range of metalworking applications. Unmatched Laser Cutting Performance High axis speeds and accelerations, paired with a stable mechanical structure, provide excellent cutting performance and accuracy. The tube and profile laser processing machine for production — space-saving and simply smart! Innovative solutions 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm 3D cutting with efficient fiber laser technology Nedpfx Afeyh A Nysajla The semi-automatic 6-fold profile tube loading chain system enables fast job changeovers. With the optional bundle loader, you can work completely independently. Bevel Cutting A function that changes everything. With our machine’s ability to swivel its cutting head up to 50° on an additional fifth axis, we address one of the biggest challenges in modern profile machining. If the laser beam always strikes the tube perpendicular to the surface, the cut edge will be elliptical. Swiveling the tube laser’s cutting head, combined with the feed axis, enables true bevel cutting. With the skyTUBE Laser, you are always on the safe side! The skyTUBE Pro is a class 1 laser system — there is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, safety and compliance with the highest standards and regulations are paramount. Technical Features: · Closed industrial housing, class 1 or optionally class 4 laser · Working area, tube cutting system/clamping system: uniform tubes 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on tube X 6500 Y ±100 Z 150 A ±360° U ±50° · Automatic material feeding: up to 6 x 160 mm profiles, 3500–7000 mm lengths · Automatic material unloading system for profile sections, design matched to profile lengths · Z drive system: ball screw axis system with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min depending on material and laser combination (1.4G) · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system, depending on required profile cut length. With standard version and 4.5 m automatic unloading, the total length is approx. 14,800 mm.

Condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Westtech Woodgripper WG1600 5-finger grapple / incl. saw unit / incl. rotator with endless rotation / NEW device / in stock & immediately available - Grapple opening (mm): 1,800 Nedpfx Aoyxvhujfaela - Net weight (basic to fully equipped) (kg): 530 – 1,190 - Recommended hydraulic flow (l/min): 60 – 190 - Recommended operating pressure (bar): 100 – 300 - Carrier vehicle operating weight, rigid (t): 12 – 22 - Carrier vehicle operating weight, oscillating (t): 12 – 22 Features: - Includes endlessly rotatable tiltator with 30° mounting bracket - Includes .404" saw unit – grease-lubricated version - Electrohydraulic switching between grapple and saw unit We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) available from stock and for immediate delivery. Our warehouse contains a large selection of various Westtech products, all immediately available! Mr. Herden (phone ...) will be happy to support you. We are pleased to provide you with a financing offer on request. We are an official sales and service partner for Westtech. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Holp. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for DMS. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Subject to errors and prior sale! = Further information = New: Yes Part suitable for: Application in forestry Contact Marius Herden for further information.

Condition: used, For inquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker CL140 Felling Grapple / NEW unit / in stock & immediately available - Cutting diameter softwood (mm): 180 - Cutting diameter hardwood (mm): 150 - Grapple opening (mm): 440 - Own weight (basic – fully equipped) (kg): 110 - Recommended oil flow (main circuit) (l/min): 20 – 60 - Recommended operating pressure (bar): 200 - Carrier vehicle operating weight (t): 1 – 4 We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse holds a wide selection of various Westtech products, available for immediate delivery! Mr. Herden (phone) is happy to assist you. On request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. Nljdpfx Afjyxvhnjasa We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Moreover, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full range of Westtech Woodcracker equipment! Errors and prior sale excepted! = More information = New: Yes Empty weight: 110 kg Suitable for: forestry applications Please contact Marius Herden for further information.

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 Nljdeqfcviepfx Afaea - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, Year of construction: 2016, operating hours: 7,600 h, * Komptech Cribus 3800 trommel screen plant mounted on truck trailer * Year of manufacture: 2016 * Total operating hours: 7,600 h; engine approx. 3,000 h * Throughput: up to 225 m3/h * Hybrid operation: mains operation 64A or with diesel generator 55 kW * Hopper: 6.5 m3 * Screen length: 6 m * Screening area: 38 m2 * 3 screens: 1st screen 10 mm (installed), 2nd screen 2/3 20 mm 1/3 15 mm, 3rd screen: 120 mm * 2 screens condition: 90%, 1 screen approx. 60% * ADR axles Nljdpfx Asyq A Epjfaja * Unladen weight: 18,620 kg * Gross weight: 22,000 kg

Condition: used, Year of construction: 1996, The Vipromat-S semiautomatic screen printing machines, manufactured by Viprotech in 1996, are currently in production and located in Germany. These machines have a format of 700 x 1000 mm and can handle a maximum sheet size of 885 x 1250 mm with a maximum stock thickness of 25 mm. The maximum printing size is 700 x 1000 mm, and the maximum frame size is 1125 x 1500 mm. The machines have an air consumption of 6 bar at 20 nl/min and an adjustable squeegee angle between 75 and 90 degrees. The off-contact is variable from 3 to 28 mm, and the fine registration adjustment ranges from to . The squeegee speed can be set between 0.2 and 1.2 meters per second, allowing for a maximum of 850 prints per hour. The machine dimensions are 170 cm in length and 160 cm in width, with a weight of 435 kg. The electrical connection required is 230 V, 50 Hz, 1ph+N+Pe, 3 kW. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 700 x 1000 mm Equipment: Width 160 cm Nljdovfxp Aepfx Afaoa Length 170 cm Maximum frame size 1125 x 1500 mm Maximum printing size 700 x 1000 mm Maximum sheet size 885 x 1250 mm Off-contact variable 3 - 28 Air consumption 6 bar, 20 nl/min Squeegee speed m/sec 0,2 - 1,2 Squeegee angle adjust 75 - 90?? Electrical connection 230 V, 50 Hz, 1ph+N+Pe, 3 kW Fine register adjustm Max. stock thickness 25 Machine weight 435 KG Max. nr of prints/hour 850 semiautomatic screen printing machines

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Nlsdpfxoum Hufs Afaoa Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional: ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Njdswv Nq Repfx Afasla Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Grinding Process : Manual Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex M-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex M-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Contact us for more details.

Condition: new, Year of construction: 2024, functionality: fully functional, workpiece weight (max.): 25 kg, product height (max.): 150 mm, product length (max.): 930 mm, product width (max.): 500 mm, production capacity: 100 unit/h, For sale is a new semi-automatic bottom-up bagging system. The system was purchased in 2024, has been dismantled, repackaged, and has never been operated. The original purchase price was €235,000! Nsdpfx Afjymxtzoaola TECHNICAL DETAILS (according to the manufacturer) Performance: approx. 100 bags/hour Bag weight: 20, 25 kg Bag sizes: bag width 500 mm, bag length 700–930 mm, bag depth 150 mm Bag material: Paper (2–5 layers) with PE inner liner or PE Weighing range: 10–30 kg Weighing accuracy: 2 Sigma +50g/–0g Weighing accuracy: compliant with PTB MACHINE DETAILS Footprint: (approx.) 20 x 4 m Control voltage: 400 V, 50 Hz – 24 DC, 3 phase Electrical power: 15 kW Electrical components: Siemens/Eaton PLC: S7-300 Drive motors/Gearboxes: SEW Pneumatic components: Festo Material: Stainless steel DIN 1.4301 Cable tray: Brand Cablofill Protection rating: IP54 Zone: ATEX zone, inside zone 20 up to 500 mm radius, zone 21, 500–1000 mm radius, zone 22 Working pressure: 6 bar Compressed air consumption: V = 89 Ndm³/bag Pneumatic connection: 5–6 bar Air requirement: 400 Nl/min Protection class: IP54 Aspiration air: 45 m³/min Note: Additional technical data can be found in the attached order confirmation.

Condition: used, Year of construction: 2009, Overview This KEG bottling unit Micromat 2/2-b was built by M+F KEG Technik in 2009. It is composed of a KEG washer and KEG filler. Until dismantling it was used in a brewery in Belgium. Technical details  Capacity: 20- 35 keg/h KEG type: 20l/30l DIN and EURO Fitting type: Typ S Station 1: Interior cleaning Station 2: Rinsing, sterilization and filling Semi automatic system with intergrated CIP, CIP tank at the back of the installation Dimensions  Length: 1,100 mm Width: 1,300 mm  Height: 2,200 mm +/- 50 mm  Electrical connection Voltage: 230/ 400 V, 50 Hz, 3 phases Connected load: 0,5 kW (without tank pumps)  Nsdpfxoxrfcxs Afaela

Year of construction: 2022, condition: used, For enquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone at ...). Westtech Woodcracker CS780 / incl. Power-Tiltator / incl. OQ 70/55 adapter plate / only 93 operating hours / year of manufacture: 2022 / immediately available / excellent condition! Price: €47,890.00 net / €56,989.10 gross Features: - Power-Tiltator, infinitely rotatable - Cutting diameter: 750 mm - Grab opening width: 1,600 mm - Own weight (basic - fully equipped): 2,000 - 2,200 kg - Recommended oil flow: 120 - 170 l/min Njdpoyi R Dqefx Afaela - Recommended auxiliary circuit flow: 50 - 70 l/min - Recommended operating pressure: 280 bar - Carrier vehicle operating weight: 20 - 28 t - Tilt function for cutting process: automatic - Saw box: actively sprung - Saw chain lubrication: grease Equipment: - incl. Power-Tiltator - incl. OQ 70/55 adapter plate We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We keep a large selection of various Westtech products in stock for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. We are happy to provide you with a tailored financing offer upon request. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telescopic handlers - JCB construction machinery - Mercedes-Benz - Iveco Also, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Errors and prior sale excepted! Internal ID: 122025 = Additional information = New: No Part suitable for: Forestry applications Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, Mr. Herden (by phone) will be happy to assist you. Westtech Woodcracker CS545 compact grapple saw / incl. endlessly rotating tiltator / NEW unit / in stock & immediately available Cutting diameter (mm): 540 Grapple opening (mm): 1,270 Own weight (base – full equipment) (kg): 610 – 780 Recommended oil flow main circuit (l/min): 50 – 100 Recommended oil flow auxiliary circuit (l/min): 35 – 50 Recommended operating pressure (bar): 200 - 250 Carrier vehicle operating weight (t): 8 – 15 Features: - incl. endlessly rotating tiltator - incl. automatic lubrication system for tiltator We have a large stock of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...), available immediately. Nedpfjyi R Atsx Afaela Our warehouse has a wide selection of various products from Westtech, ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. We are happy to provide you with a financing offer upon request. We are an official sales and service partner for Westtech. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB construction equipment. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We provide you with the complete range of Westtech Woodcracker products! Errors and prior sale excepted! = Further information = New: Yes Part suitable for: Application in forestry Please contact Marius Herden for more information.

Condition: new, Year of construction: 2025, Automatic shrink wrapping machine for packaging products in shrink film with shrink tunnel. The machines are widely used in the pharmaceutical, food, cosmetics, stationery, electronics, and daily goods industries. Very easy to operate machine. Very large working area. Length + height max 600mm Width + height max 500mm Max height 150mm Year of Production: 2025 Price for the set (wrapper + tunnel): 48,000 PLN net. Video link: youtu.be/WbgBJRHyAmk Katowice Packaging line Automatic packaging machine Packaging automaton Automatic wrapper Cellophane machine Nledpsyilf Tjfx Afaoa Automatic film wrapping machine

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 2,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, emergency stop, finger protection, foot remote control, Standard Features - ELGO P40T CNC control unit - Robust, welded, monolithic frame construction providing maximum cutting precision - NC-controlled, motorized 750 mm backgauge system - Upper blade with 2 cutting edges, lower blade with 4 cutting edges, made of high-alloy steel - Mechanical hold-down system preventing sheet slippage during cutting - Easily adjustable blade clearance adjustment mechanism - Ball transfer front support table - Front support arms with rule - Cutting line illumination system - Finger guard system - Foot pedal - Rear safety guards - Emergency stop button Nlodpfx Aeyg Id Asfaea Optional Features - 1,000 mm backgauge system - Rear sheet support and sliding system enabling sheets to be moved and fed to the rear with ease - Drop-down system for cut pieces to fall to the front - Front adjustable angle square, 0–180° - Front support arms in custom lengths - Manual 750 mm backgauge with front adjustable handwheel - Rear safety light barrier Technical Specifications Machine Type: A04/2060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 2,060 mm Cutting Angle: 1.3° Cutting Speed: 41 cuts/min Table Depth (C): 800 mm Machine Dimensions (L × W × H): 2,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Weight: 3,000 kg

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 3,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, Standard Features ELGO P40T CNC control unit Robust, welded and monolithic frame structure providing maximum cutting precision NC-controlled, motorized 750 mm backgauge system Upper blade: double-edged; lower blade: four-edged, manufactured from high-alloy steel Mechanical hold-down system to prevent sheet slippage during cutting Easily adjustable blade clearance system Ball transfer front support table Front support arms with ruler Cutting line illumination system Finger protection system Foot pedal Rear protective cages Emergency stop button Nodjyg Ic Espfx Afasla Optional Features 1,000 mm backgauge system Rear sheet support and sheet sliding system for easy positioning and transfer of sheets to the rear System for dropping cut pieces to the front Adjustable front angle gauge 0–180° Front support arms available in custom lengths upon request Manual 750 mm backgauge with front-adjustable handwheel system Rear safety light barrier Technical Specifications Machine Type: A04/3060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 3,060 mm Cutting Angle: 1.3° Cutting Speed: 41 strokes per minute Table Length (C): 800 mm Machine Dimensions (L × W × H): 3,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Weight: 4,000 kg

Condition: good (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, conveyor belt length: 2,750 mm, conveyor belt width: 400 mm, conveyor belt speed: 300 mm/s, total length: 3,200 mm, total width: 950 mm, total height: 1,700 mm, discharge height: 1,150 mm, power: 0.55 kW (0.75 HP), type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, motor manufacturer: SEW, Equipment: type plate available, Flexowell conveyor belt system (custom-made), Manufacturer: Albrecht Fördertechnik GmbH Riedweg 3 88436 Füramoos consisting of: • Profiled steel construction with 2600 mm center distance • Line layout: Feed conveyor section approx. 900 mm horizontal, inclined conveyor section approx. 1850 mm, 20° angle of inclination, rubber conveyor belt BB 650 mm, transversely stable, with Flexowell edges h = 600 mm on both sides of the load-bearing side, T50 cross cleats spaced every 400 mm. Usable width approx. 400 mm. • Support rollers spaced 500 mm apart, stub return rollers spaced 750 mm apart • Relief and return rollers are maintenance-free. • Maintenance-free load-bearing rollers. • Driven by SEW slip-on gear motor 0.55 kW, v = approx. 0.3 m/s • Motor/terminal box with attached Harting connector 10-ASB1 • Drive and idler pulley d = 220 mm, with 8 mm rubber friction lining • System with 3-sided feed hopper L = 900; H = 200/130 mm, W = 600 mm • Hopper with bolted rubber lining made of 65° shore wear-resistant rubber • Sheet metal covering of the edge-free zone of the rubber belt with SF • System with 2 pairs of adjustable supports (feed height top of hopper 1020 +/- 100 mm) • 1 x Siemens G120C 0.55 kW with frequency converter For further information, see attached documents and drawing Nsdewi Rlcjpfx Afaela

Condition: used, functionality: fully functional, SEMI-AUTOMATIC capsule filling machine. 2 capsule sizes set offered with the machine: Size 0 and Size 00. Nedpfxjyf Uhrs Afajla