Used Cosmotec Cooling Device for sale (17,754)

Condition: new, Viessmann Tecto RF WMC3 1450 Refrigeration Unit The Viessmann Tecto RF WMC3 1450 (also known under the series designation TectoRefrigo) is a state-of-the-art, plug-and-play, piggyback refrigeration unit for wall mounting in cold storage rooms for standard cooling applications. Technical Data • Manufacturer: Viessmann Refrigeration Solutions • Model Designation: Tecto RF WMC3 1450 (Size 2) • Equipment Type: Plug-and-play piggyback refrigeration unit (monoblock) for wall mounting • Integrated Bluetooth connectivity (for control via app and data tracking) • Automatic leakage detection • Pre-installed connection cables: 2.5 m for door contact switch and 5 m Modbus-RTU cable (for building automation system / BMS). • Application area: Standard cooling • Housing surface: Powder-coated, similar to RAL 9003 (signal white) • Cooling capacity at L0L32 (0 °C chamber / 32 °C ambient): 1450 watts • Cooling capacity at L0L43 (0 °C chamber / 43 °C ambient): 1270 watts • Control range for cold storage room: -5 °C to +10 °C • For cold storage room volume: Up to approx. 11.1 m³ to 15 m³ (depending on the selected insulation, goods, and set temperature) • Airflow (evaporator): 1000 m³/h • Permissible ambient temperature: +5 °C to +43 °C (indoor operation only) • Refrigerant: R290 (propane) – an environmentally friendly, natural refrigerant with a very low global warming potential (GWP 3) • Refrigerant charge: < 150 g • Global Warming Potential (GWP): 3 • CO₂ equivalent: < 0.45 t • Defrosting: Automatic hot gas defrosting with demand-controlled cycle control • Condensate: Automatic, integrated condensate evaporation • Maximum permissible wall thickness: 150 mm (for the mounting cutout) • Power connection: 230 V / 50 Hz (AC via CEE plug, blue, power consumption approx. 990 W) • Power consumption (nominal current): 5.4 A • Sound pressure level: 32.8 dB • Dimensions: 828 mm x 671 mm x 976 mm (H x W x D) • Weight: 64 kg (net) Dimensions for the wall cutout • Width of the cutout: 575 mm • Height of the cutout: 395 mm Key features • Piggyback design: The monoblock unit is simply hung into the corresponding cutout in the cold storage room wall (“piggyback”). The maximum wall thickness may be 150 mm. • Hot gas defrosting: The unit has an automatic, demand-controlled hot gas defrosting system with integrated condensate evaporation, so that a separate drain is usually not necessary. • Smart electronics: Equipped with modern control, Bluetooth connectivity (for app control and data tracking), and automatic leakage detection. • Components: Thermostatic expansion valve, pressure sensors, and efficient, internally finned heat exchangers. Important application notes • Ambient temperature: The device is designed exclusively for operation in closed rooms with an ambient temperature of +5 °C to +43 °C. It does not have a winter control system and is not weatherproof (no outdoor installation). Njde Aa Rlrspfx Ab Asdc • Accessories for Viessmann cells: If the WMC3 unit is mounted on a classic Viessmann cold storage room, a special adapter cable and a converter box are usually required to connect the door contact switch and the power supply correctly. “Everything from one source: We would be happy to offer you suitable bank financing for your project.” More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Weiss   Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters   For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating the effects of sunlight and weather. The device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3).   Technical details   UV spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases   Humidity range: approx. 10 % … 95 % RH (relative humidity) Ndodpfx Asziiz Hjb Ajc at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min   Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm   Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A   Refrigerant: R 404A   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are reserved!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Temperature Shock Chamber / Temperature Test Chamber CTS TSS-70/130 Temperature Shock Chamber Water-cooled temperature shock chamber, approx. 130 liters For sale is a used temperature shock chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The test chamber is suitable for temperature shock tests, cyclic temperature tests, material testing, quality assurance as well as development and stress tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Device type: Temperature shock chamber / Temperature test chamber Test volume: approx. 130 liters External dimensions: approx. 2335 x 940 x 1820 mm (W x D x H) Internal dimensions: approx. 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions: approx. 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight: approx. 950 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Changeover time: < 10 seconds Ramp-up rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min from room temperature to +180 °C Cooling rate: approx. 4 K/min from room temperature to -60 °C Temperature deviation (time): ±1 K Temperature deviation (spatial): ±2 K Power connection: 400 V 3/N / 50 Hz Power: 16.6 kW Rated current: 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant, precooling stage: R404A Refrigerant quantity, precooling stage: 4.0 kg Refrigerant, cooling stage: R23 Refrigerant quantity, cooling stage: 0.6 kg / 10 bar Operating pressure PS: 25 bar Water-cooled version Cooling water connection required Compressed air connection required Operation only possible with cooling water and compressed air Cooling water inlet: 3–6 bar Equipment CTS control panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Mobile frame with screw drive Test chamber / mobile frame made of stainless steel Insert tray made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Documentation / operating manual Nodpfxezf Ibkj Ab Ajdc Accessories according to images Application areas Temperature shock testing Cyclic temperature testing Material testing Electronics testing Component testing Aging tests Quality assurance Research and development Condition Used Optical condition according to images Scope of delivery 1x CTS TSS-70/130 temperature shock chamber Insert tray / test chamber equipment Available documentation / documents Operating manual Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the images that are not explicitly described are not included in the scope of delivery. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Nsdpfx Asz Snbqob Ajdc Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Ndsdpfx Absyb Sdij Aoc Made in Germany Good working condition

Condition: new, operating hours: 2 h, functionality: fully functional, total width: 800 mm, total length: 1,200 mm, tank capacity: 90 l, pump capacity: 8 l/min, input voltage: 24 V, type of input current: DC, With our UST-100, your cooling lubricant is produced automatically and constantly monitored so that you and your employees have time for the essentials. Connected to a drum of concentrate and the water line, our special mixing process creates an emulsion and feeds it directly into your machine tanks via the supply line. Our sensors constantly monitor the concentration, pH value, temperature and level in the machine tank so that you always know the condition of your coolant. NECESSARY CONNECTIONS: ..1/2 inch cold water 5 bar ..230V Schuko ..10mm AD compressed air 3 bar OPTIONAL CONNECTIONS: ..Wifi for digital measurement protocols and live monitoring outside of production Njdsu Svhmopfx Ab Aedc EXPANDABLE: ..additional tanks can be connected at any time, up to max. 20 tanks !!! All-inclusive price for the system incl. supply of 5 tanks for exact price calculation please contact us !!!

Condition: used, MEMMERT Precision incubator / Refrigerated incubator MEMMERT ICP 600 Precision incubator with cooling, air circulation, and 256-liter internal volume For sale is a used precision incubator from the manufacturer MEMMERT. The device is suitable for temperature-controlled applications in laboratories, research, quality assurance, and industry, as well as for incubation and testing tasks in the temperature range of 0 °C to 60 °C. Technical data: Manufacturer: MEMMERT GmbH + Co. KG Type: ICP 600 Device type: Precision incubator / Refrigerated incubator Internal volume: 256 liters Setting temperature range: 0 °C to 60 °C Operating temperature range: 0 °C to 60 °C Setting accuracy: 0.1 °C Nominal temperature: 60 °C Internal dimensions: approx. 800 × 640 × 500 mm (W × H × D) External dimensions: approx. 958 × 1335 × 656 mm (W × H × D) Weight: approx. 144 kg Power connection: 230 V / 50 Hz Power consumption: 3.1 A Power: 700 W Protection class: IP20 Inserts: Maximum number of sliding shelves: 7 Maximum load per sliding shelf: 30 kg Maximum load per device: 80 kg Equipment: Electronic PID process controller Alphanumeric text display Internal data logger Program control for up to 40 ramp segments Adjustable air circulation Integrated weekly timer Recessed push button / rotary encoder Optical alarm indicator Refrigeration unit with automatic hot gas defrost Stainless steel interior Sliding shelves as shown in the pictures Nodpsz Eh Syefx Ab Ajdc Mobile base RS232 interface Accessories as shown in the pictures Application areas: Laboratory applications Incubation Temperature tests Material testing Quality assurance Research and development Industrial applications Temperature-controlled storage Scope of delivery: 1 × MEMMERT ICP 600 precision incubator Sliding shelves as shown in the pictures Mobile base Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplate present Shipping or freight transport is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), I am offering for sale a professional Unitek Benchmark laboratory chiller/recirculator. This unit is designed for cooling and maintaining a constant temperature of liquids in laboratory systems, measuring devices, lasers, medical equipment, and other systems requiring a cooling circuit. The housing is made of coated steel, and the tank is a durable construction resistant to the effects of cooling fluids. Ndjdpfx Abez Sndlj Aec Technical data: Manufacturer: Unitek Benchmark Stock No.: 043008 Serial No.: LJ080297F Power supply: 230 V AC Current: 3.1 A 1 phase Frequency: 50/60 Hz Condition: Used. Very good visual condition. Sold in the exact condition as shown in the pictures.

Condition: good (used), Cooling compressor Stal KTK 207 25-33 Bar YOM 1991 Good condition Dimensions (LxWxH): 4700x2200x1450 mm Ndsdpfx Aoyb Rqujb Aoc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Cooling tunnel with air knives Total length: 3000 mm Usable width: 1300 mm The ventilation unit consists of: - Supply and recirculation fan: 3 kW; flow rate: 6000 m3/h - Exhaust fan: 1.5 kW; flow rate: 6000 m3/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Velocity at the air knife outlet: max. 32.5 m/sec Overall width: 1783 mm Clearance height: 80 mm Maximum tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Autonomous electrical control cabinet Machine control via LCD 5.7" touch control panel for complete management of the operating parameters Option to save and retrieve recipes Nodpo Afngwofx Ab Aedc TT 4000 slat conveyor with double chain, steel guides, and chrome-plated slats: Feed controlled by inverter-controlled reduction gearbox Length 4000 mm; speed max. 20 m/min; min. 2.1 m/min; installed electrical power: 0.75 kW; slat diameter: 25 mm; slat spacing: 114 mm

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer Nodpfsz Iww Rox Ab Aodc • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Nedpfx Absxlkg Ao Ajdc Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2015, condition: ready for operation (used), NanoString nCounter Sprint Profiler Analysis System Technical Specifications * Multiplex analysis: up to 800 targets simultaneously * Sample throughput: up to 24 samples per day * Sample capacity: 1–12 samples per run * Hands-on time: approx. 10 minutes * Analytical method: digital molecular counting using fluorescence-labeled reporter probes * Sample preparation and analysis: integrated into a single device * Sample material: total RNA, FFPE-derived RNA, cell lysates, and suitable lysed whole blood samples * SPRINT cartridge reaction volume: 25–35 µl * Dynamic measurement range: up to 6 × 10⁵ total counts * Data export: digital count values, including as a CSV file * Software: nSolver Analysis Software (check availability and license scope) Device dimensions and weight * Width: 107 cm * Depth: 72 cm * Height: 82 cm * Weight: approx. 95.25 kg Technical description has been adopted. You are welcome to visit us for a demonstration. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. Ndode Afcqqepfx Ab Aec The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the article may occur and are subject to change.

Condition: good (used), tank capacity: 14,500 l, total width: 2,150 mm, total height: 6,200 mm, Equipment: cooling unit, 14500l stainless steel tank with cooling Height: 6200 mm Diameter: 2150 mm Operating pressure: 0.0 bar internal, 1.0 bar cooling jacket Material: Stainless steel 1.4301 (AISI 304) Ndsdpfx Ajzzxhaob Aec Design: Cylindrical, upright, on a central plinth; DN 40 outlet; top manway; CIP with RLV line; 3 cooling zones Previous application: Beer 3 units available Each tank has been leak-tested A 12-month warranty is provided for each tank.

Condition: like new (used), Year of construction: 2020, Like-new Bilz ISGG 3412LK induction thermo-shrinking machine, manufactured in 2020: Fast and professional shrinking, integrated air cooling. Type: ISGG 3412LK Serial number: 2073551-02 Date of manufacture: 43/20 Rated voltage: 400 V Rated current: 16 A Frequency range: 50-60 Hz Includes standard coil and special coil with a through-hole for HSK63 (the collet can be guided through the coil for "mushroom-type tools"). Includes 7 ferrite covers for various diameters. Lightly used, practical table-top unit – only being sold because we are closing our business. If you have any questions or require further information, please send us a message or call us. Ndodpfx Ao Ac R Dgjb Aec

Condition: good (used), Year of construction: 2010, HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph Ndsdpewxlmaefx Ab Aec

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 647/07, overall weight: 1,000 kg, total length: 2,500 mm, total width: 2,500 mm, total height: 4,700 mm, input frequency: 50 Hz, input voltage: 400 V, type of input current: three-phase, Good morning, I have a CWT 95/1200 cooling tower for sale. It is a forced-draft cooling tower. The technical specifications are shown in one of the photos. Documents for the forced-draft cooling tower: - Declaration of Conformity - Technical and Operational Documentation - Information Sheet Renovation work carried out: - Motors rewound - Bearings replaced - Sealing systems replaced Ndodpfxjz Szfbe Ab Ajc I am happy to provide any additional information by phone or email.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1C968, Very well-maintained, almost new CO₂ refrigeration and freezing system from 2022. The system is being replaced because the company is moving to a larger building, making the complete installation redundant. Specifications: 2 freezing units for a freezing room of 1,000 m². (freezer capacity is 8,000 m³). Nodpfo Aa Rh Tox Ab Aedc 3 cooling units for a cooling room of 2,000 m². (cooling room capacity is 8,500 m³). 2 switchgear cabinets. 1 pressure unit/booster compressor unit, including expansion tanks. 1 condenser. This is a complete installation, including all documentation. It will be dismantled and loaded.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, overall weight: 579 kg, year of last overhaul: 2024, Equipment: documentation/manual, lighting, type plate available, Mitutoyo QVT1-X404P1L-D 3D CNC Multisensor Measuring Machine Enhanced application possibilities through the combination of tactile and non-contact measurement. Powerful CNC-controlled system for intelligent, simple, and fully automatic measurements. Multiple image processing filter functions ensure reliable results. Flexible switching of probe tip configurations with the MCR20 probe head changer. White LED transmitted light. White LED coaxial light. Programmable 4-quadrant LED ring light. Triangular pattern focusing for low-contrast surfaces. Programmable magnification changer with 1x, 2x, and 6x magnification. High-resolution CCD black and white camera. Resolution: 0.0001 mm "One-Click Tool" technology for optimal edge detection. Ndjde Afdr Aspfx Ab Aec

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Nedpfezphdtox Ab Asdc Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Includes compressed air hose with claw coupling, 10 m The blowing device Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Thrust force 20 daN L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Protection class: IP65 Lamp type: MXR-160HP/20 Operating temperature range: 5°C - 40°C Machine weight: 420 kg Length: 1750 mm Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Option to start the machine on-site. Nodszrh D Sjpfx Ab Asdc

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Ndedpfsziww Aex Ab Aec Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Condition: good (used), Year of construction: 2020, functionality: fully functional, The Koch company’s material suction unit is available; the price is for one unit. All units are equipped with a level sensor, a material lock, and a funnel. There are 13 units in stock. Voltage: 24 V DC Height: 595 mm Ndsdpfx Abez Nxlms Aec Weight: 12 kg Discharge connection: Nominal size: 40 mm Base size: Z5/Z12/Z24 Level sensor Material lock

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. Nodpfxoziwwio Ab Aodc The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Year of construction: 2012, condition: like new (used), Used STULZ ALD 1072 GE precision cooling / close control air conditioning units, suitable for data centre and technical room cooling applications. The units are manufactured by STULZ GmbH Hamburg and are CE marked. They use R410A refrigerant and operate on 400V / 50Hz power supply. Units are available with and without ECU, depending on requirement.Technical details: Manufacturer: STULZ GmbH Hamburg Type: ALD 1072 GE Years available: 2012 and 2014 Refrigerant: R410A Supply voltage: 400V ±10% Frequency: 50Hz Max. operating pressure: 40 bar Max. refrigerant filling charge: 11.20 kg Made in Germany Application: Data centre / server room / technical cooling Ndedszklciopfx Ab Aec Condition: Used Total available: 7 units