Used Cormak Zbiornik Ciśnieniowy 16 Bar 500 L for sale (83,099)

Condition: excellent (used), Year of construction: 2007, 1 used container steam boiler ----- - installed in a 20” sea container - Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 m² Boiler output max.: 1,250 kg/h Operating pressure: 16.0 bar Increased test pressure: 29.6 bar Water content at nominal water level approx.: 993 l Water content when full approx.: 1,365 l Year of manufacture: 2007 CE marking: 0036 Equipped with a Weishaupt WMGL combination gas/oil burner, Dcodezguypspfx Albel gas control system, control panel, feedwater pump, and the existing coarse and fine fittings.

Condition: excellent (used), Gruse Type: ELD 1-16-1 Djdpfx Alszgclyebjcl Gruse Lifting Table ELD 1-16-1 Easily lift heavy loads Scissor lift table: Lifting table with double scissors Lifting table ELD Type designation explanation: Type designation ELD Load capacity 500 kg Overall height 350 mm Usable lift 1600 mm Maximum height 1950 mm Tabletop 1250 x 800 mm Base frame 1250 x 750 mm Lifting time approx. 21 sec. Power 2.3 kW Weight approx. 600 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, mileage: 136,470 km, power: 115 kW (156.36 HP), first registration: 03/2014, fuel type: diesel, empty load weight: 5,985 kg, maximum load weight: 1,505 kg, overall weight: 7,490 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 3,320 mm, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 4,440 mm, loading space width: 2,460 mm, loading space height: 2,300 mm, Equipment: ABS, cabin, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, tail-lift, traction control, trailer coupling, Vehicle location: Bovenden, Mercedes PowerShift 3, Kz. house, swing seat, electric mirrors, heated mirrors, cruise control, ABS (anti-lock braking system), traction control (ASR), frame cladding, leaf-air suspension, AHK ball head, doors, lashing rails, U-protection, roof hatch, tail lift aluminum, upright, refrigeration unit diesel/electric, environmental badge green Wheelbase: 3320 mm Body: STS refrigerated box body with ThermoKing T-800R refrigeration unit (diesel/electric) & 1t BÄR BC1000S4 tail lift 4.1t front axle, rear axle 325 Hypoid disc wheel 6.2t, electronic brake system with ABS and ASR, disc brakes on front and rear axle, condensation water monitoring for compressed air system, rear axle stabilizer, classic cockpit, pollen filter, economy driving program, Mercedes PowerShift 3, daytime running lights, ESP. Loading height approx. 1050mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dodpfx Alewphvlsbecl - .

Condition: excellent (used), Year of construction: 2002, 1 used steam boiler ----- - frame-mounted - - with integrated economiser - Manufacturer: LOOS, Gunzenhausen Model: UL-S 4000 Heating surface approx.: 80 m² Output: 4,000 kg/h Dsdpfx Ajy H Iruslbjcl Permissible operating pressure: 16 bar Increased test pressure: 30.4 bar Water content at nominal level approx.: 5,930 l Total water content approx.: 8,020 l Year of manufacture: 2002 Equipped with Weishaupt combination burner (gas/oil), RGL 10/1-D, version ZMD, 500 – 4,100 kW, gas control line, separate control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: used, mileage: 714,112 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total width: 25,500 mm, total height: 37,000 mm, Year of construction: 2015, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (at Tel. ...). Mercedes-Benz Antos 2543 L 6x2 beverage box body: Dsdpfxoy T Uuis Albjcl - A1A front axle with air suspension, A1D front axle 8.0 t, A1Z front axle - cranked design, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A4Y trailing axle 7.5 t, steered, liftable, relieveable, A5C axle ratio i = 2.733 - B1B electronic braking system with ABS and ASR, B1E electronic compressed air supply unit, high output, B1F heating for electronic compressed air supply unit, B2A disc brakes on front and rear axles, B3H secondary water retarder, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections left, B5L trailer brake connection rear, Duo-Matic + standard, C0Z frame overhang 1950 mm, C2P wheelbase 4600 mm, C5I mounting parts for flatbed body, C5P bolted frame, C6C steering, single circuit, C6J steering assist pump non-regulated, C6U additional stabilizer for rear/trailing axle, C7F front underrun protection (ECE), aluminum, C7J battery box, batteries side-by-side, C8F fenders for chassis transfer, C8I splash protection (EC), front, C9Y rear underrun protection deleted (ECE), D0L smoker’s package, D0S compressed air connection in cab, D1C driver comfort suspension seat, D1N passenger functional seat, D2N seat backrest release, driver’s seat, D3I lower bunk, D3Q seat cover velour, D4Y driver's side sunblind, D6F air-conditioning, D6I residual heat utilization, D6M hot water auxiliary heater cab, D7G lockable storage compartment, driver/passenger side, D7P low storage tray on engine tunnel, D8A roof hatch/ventilation flap, E0D Hella battery sensor, E1C batteries 2x12V/220Ah low-maintenance, E1M alternator 28V/150A, E3L socket 24V/15A passenger footwell, E4B Fleet Management System (FMS) interface, E4C additional functions for bodybuilders, E4W starting aid, speed limit 30 km/h, E5A switch no. 1 for external body electrics, E6A 24V 15-pin trailer socket, E7F remote cable control for air suspension, E9H pre-installation control for tail lift, F0F side module, N3 vehicle, F0X mirror cover for road vehicle, F1O M cab ClassicSpace, 2.30m, 320mm tunnel, F3B cab mounting, comfort, steel sprung, F3W cab tilting device mechanical-hydraulic, F4H cab rear wall without window, F4X external storage flap left, F5C airflow body without base trim, lockable, F5L external sun visor, transparent, F5Y A-pillar panelling, F6C tinted windscreen, F6I heated front mirror, F7B bumper steel corners, F7C bumper center with towing eyes, F7X cab entrance left/right fixed, F8B 2 remote control keys, F8E central locking system, F8F comfort locking system, G0U economy drive program, G2B transmission G 211-12/14.93-1.0, G5A single disc clutch, G5G Mercedes PowerShift 3, I2G tubeless tires 315/80 R 22.5 front/leading/trailing axle, I2H tubeless tires 315/80 R 22.5 rear axle, I4C axle configuration 6x2 ENA, I6I production plant Wörth, I6X air suspension rear axle, J1C 12.7 cm cluster instrument with video function, J1R speedometer digital, EC, rpm, ADR, J1S tachograph manufacturer VDO, J2D radio/navigation system Bluetooth, comfort, J2K speakers 2-way system, J9B telematics pre-installation, J9C Fleetboard pre-installation for J3D, J9D toll pre-installation, J9J reverse camera pre-installation, K0T main tank left, K1E tank 390L left, 650 x 565 ...

Condition: used, mileage: 736,739 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total width: 25,500 mm, total height: 37,000 mm, Year of construction: 2015, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (at Tel. ...). Mercedes-Benz Antos 2543 L 6x2 beverage box body: Dcjdey T Uucopfx Albol - A1A front axle with air suspension, A1D front axle 8.0 t, A1Z front axle - cranked design, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A4Y trailing axle 7.5 t, steered, liftable, relieveable, A5C axle ratio i = 2.733 - B1B electronic braking system with ABS and ASR, B1E electronic compressed air supply unit, high output, B1F heating for electronic compressed air supply unit, B2A disc brakes on front and rear axles, B3H secondary water retarder, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections left, B5L trailer brake connection rear, Duo-Matic + standard, C0Z frame overhang 1950 mm, C2P wheelbase 4600 mm, C5I mounting parts for flatbed body, C5P bolted frame, C6C steering, single circuit, C6J steering assist pump non-regulated, C6U additional stabilizer for rear/trailing axle, C7F front underrun protection (ECE), aluminum, C7J battery box, batteries side-by-side, C8F fenders for chassis transfer, C8I splash protection (EC), front, C9Y rear underrun protection deleted (ECE), D0L smoker’s package, D0S compressed air connection in cab, D1C driver comfort suspension seat, D1N passenger functional seat, D2N seat backrest release, driver’s seat, D3I lower bunk, D3Q seat cover velour, D4Y driver's side sunblind, D6F air-conditioning, D6I residual heat utilization, D6M hot water auxiliary heater cab, D7G lockable storage compartment, driver/passenger side, D7P low storage tray on engine tunnel, D8A roof hatch/ventilation flap, E0D Hella battery sensor, E1C batteries 2x12V/220Ah low-maintenance, E1M alternator 28V/150A, E3L socket 24V/15A passenger footwell, E4B Fleet Management System (FMS) interface, E4C additional functions for bodybuilders, E4W starting aid, speed limit 30 km/h, E5A switch no. 1 for external body electrics, E6A 24V 15-pin trailer socket, E7F remote cable control for air suspension, E9H pre-installation control for tail lift, F0F side module, N3 vehicle, F0X mirror cover for road vehicle, F1O M cab ClassicSpace, 2.30m, 320mm tunnel, F3B cab mounting, comfort, steel sprung, F3W cab tilting device mechanical-hydraulic, F4H cab rear wall without window, F4X external storage flap left, F5C airflow body without base trim, lockable, F5L external sun visor, transparent, F5Y A-pillar panelling, F6C tinted windscreen, F6I heated front mirror, F7B bumper steel corners, F7C bumper center with towing eyes, F7X cab entrance left/right fixed, F8B 2 remote control keys, F8E central locking system, F8F comfort locking system, G0U economy drive program, G2B transmission G 211-12/14.93-1.0, G5A single disc clutch, G5G Mercedes PowerShift 3, I2G tubeless tires 315/80 R 22.5 front/leading/trailing axle, I2H tubeless tires 315/80 R 22.5 rear axle, I4C axle configuration 6x2 ENA, I6I production plant Wörth, I6X air suspension rear axle, J1C 12.7 cm cluster instrument with video function, J1R speedometer digital, EC, rpm, ADR, J1S tachograph manufacturer VDO, J2D radio/navigation system Bluetooth, comfort, J2K speakers 2-way system, J9B telematics pre-installation, J9C Fleetboard pre-installation for J3D, J9D toll pre-installation, J9J reverse camera pre-installation, K0T main tank left, K1E tank 390L left, 650 x 565 ...

Condition: good (used), mileage: 782,543 km, first registration: 02/1992, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel-air, total length: 5,900 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 1992, = Further Options and Accessories = - Aluminum fuel tank - Leaf suspension - Air suspension - Sleeper cab - Sun visor = Remarks = Volvo F16.500 Globetrotter 4x2 – Fully renovated – Volvo Demo colors – New paint – Perfect condition Year: 28-02-1992 Mileage: 782,543 km VIN: YV2H3A6A8NA369308 Registration: 76-BTB-7 Volvo in perfect condition Dodeuxyc Iepfx Albscl New paint – Volvo Demo colors Interior like new Air suspension 3.60 m wheelbase Telma retarder Cruise control Double bed Electric windows Air horn Additional lights Visit our website for all photos and details: = Further Information = Technical Information Number of cylinders: 6 Engine capacity: 16,115 cc Transmission: Volvo manual gearbox Front axle: Tire size: 315/80R22.5; Max. axle load: 7,500 kg; Tire tread left: 70%; Tire tread right: 70%; Suspension: Leaf spring Rear axle: Tire size: 295/80R22.5; Dual-mounted; Max. axle load: 11,500 kg; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 70%; Tire tread right outer: 70%; Suspension: Air suspension Weights Unladen weight: 8,000 kg Payload: 11,000 kg Gross vehicle weight: 19,000 kg Functional Body manufacturer: Volvo Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Identification License plate: 76-BTB-7

Condition: used, Falch 3 phase high pressure cleaner 500 bar pressure @ 15lpm only done about 360 hours and works perfectly. Sold with trigger but no hose used for cleaning boat hulls stone work excavator tracks and any cleaning where very high pressure is required Dedpfx Alsxc Numobscl

Condition: good (used), Pressure vessel 11 bar, 1500 Liter litre Dsdpfx Aog A Hc Holbscl

Condition: used, Homogenizator tłokowy produkcji GEA Niro Soavi model NS3006H. Maksymalny przepływ do 50 l/godz. Maksymalne ciśnienie pracy do 1500 bar. Urządzenie jest wyposażone w pompę i lokalne sterowanie. Całość zamontowana na przejezdnej ramie ze stali kwasoodpornej. Djdjzinb Sepfx Albjcl

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE125 series is an electrically powered high-pressure machine for pressures ranging from 200 to 2500 bar and a flow rate of 21 to 240 l/min. The frame is made of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure secure positioning. A lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz - bar - l/min. CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others, see data sheet and available upon request. General specifications: ----- Power of the drive motor: 90 kW (50 Hz) / 90 kW (60 Hz) Voltage: 400 V (50 Hz) - 440 V (60 Hz) Amperage: 81 A (50 Hz) - 108 A (60 Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Dcjdehga Rxspfx Albsl Including standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE150 series is an electrically powered high-pressure machine for a pressure range of 200 to 2500 bar and a flow rate of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure stable positioning. A lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz - bar - l/min CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 Dodpfxshga Scj Albocl CE150-2500-21 60 Hz and other models, see data sheet and available upon request. General specifications: ----- Power of the drive motor: 90 kW (50 Hz) / 110 kW (60 Hz) Voltage: 400V (50 Hz) - 440V (60 Hz) Amperage: 160A (50 Hz) - 180A (60 Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.

Condition: excellent (used), CERTUSS Universal 500 TC. 500 kg/h. 10 bar. Rapid steam generator Dcodpfx Alexqr D Tjbjl

Condition: new, Year of construction: 2026, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank Included in the scope of delivery: 1x End upright extension, new Design: Universal Material color: RAL 5010 Prussian blue Overall height: 650 mm Dcedpfx Ajdd Ev Nslbel Usable height: 500 mm Telescopic: 600 - 1,150 mm depth Frame profile dimensions: 45 x 45 mm angle Hole grid: 5 x 25 mm Hole diameter: 30 x 10 mm Weight: 6.83 kg / piece Our services at a glance: (Prices upon request) - Assembly, installation Please note our general assembly conditions - Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems - Delivery with our own fleet (without unloading) Shipping costs upon request!

Condition: ready for operation (used), Year of construction: 2008, grinding length: 1,600 mm, grinding width: 630 mm, Surface grinder 1600 x 630 M7163x16100, magnetic table size 1600 x 630, machine length 5400mm, depth 2500mm, height 2600mm. Automatic feeds in the X and Y axes. We are the first owners; the machine is used on average for a few hours a month for service-related grinding. Year of manufacture: 2008. Power: 22KW, 60A. Shipping costs are borne by the buyer. We can arrange complete container shipping, including packing and loading. Here are two packing options: Dcedsy Shzajpfx Albsl Option 1 Packing on a pallet + aluminum foil and moisture absorbers Requires a 40' HC container. This is the recommended option, as the vacuum foil and absorbers create a protective barrier against moisture and salt. Cost, including loading and securing the machine in the container: 1800 EUR (net). Option 2 Packing without a pallet, aluminum foil, or absorbers. Loading only into a 40' OT container. Cost: 850 EUR (net). Note: In this case, the machine will be more exposed to moisture and salt. Example cost of TRANSPORT ORGANIZATION SERVICE – freight forwarding (all-in), loading Częstochowa, PL, unloading 121001 India, IN, 40 HC, port-to-port, approximately 40 days: 5,050.00 USD.

Condition: new, Year of construction: 2026, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank Included in the scope of delivery: 1x End frame extension, new Design: Universal Material color: RAL 1018 Zinc Yellow Overall height: 650 mm Usable height: 500 mm Telescopic: 600 - 1,150 mm depth Frame profile dimensions: 45 x 45 mm angle Hole grid: 5 x 25 mm Hole diameter: 30 x 10 mm Weight: 6.52 kg / piece Our services at a glance: (Prices on request) - Assembly, installation Please note our general assembly conditions - Shelf inspection Shelf inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelf systems - Delivery with our own fleet (without unloading) Shipping costs on request! Dcsdedd Ewbepfx Albol

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Key Advantages of the MP160 Parts Washer 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces Djdpfeztwkdox Albjcl The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Maximum detergent temperature 70°C Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters Dedpferh E Dqsx Albecl ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 400 kg

Condition: used, 2 fans Type: GVLK 500 Capacity: 11,000 m3/h Djdpsxrr Inofx Albjcl

Condition: excellent (used), For sale: a Grundfos CRK2-260 AMA AUUV multi-stage vertical pump with a three-phase Grundfos MG 100LB2-28FT130-C motor. Dedpfx Aezn N T Tjlbocl The unit is fully functional, tested, and ready for operation. Its technical condition is very good, with normal signs of wear and tear resulting from use. Pump specifications: Manufacturer: Grundfos Model: CRK2-260 AMA AUUV Pump power: 3.0 kW Power supply: 3-phase Frequency: 50 Hz Flow rate: 16–58 l/min Head: 107–225 m Motor specifications: Manufacturer: Grundfos Model: MG 100LB2-28FT130-C Power: 3.0 kW Power supply: 200–220 V Δ / 346–380 V Y (50 Hz) Rotational speed: 2880–2910 rpm Protection class: IP54 Insulation class: F

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined Dcjdpfx Ajyb Nc Njlbjl CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Dcsdjyb D Dbspfx Albel Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: new, Year of construction: 2026, CKT 560 × 1500 CNC Metal Lathe is a professional industrial solution combining advanced CNC technology with a robust machine structure, designed for production facilities requiring the highest standards of machining quality. This industrial CNC lathe enables a wide range of complex operations, including external and internal turning, spherical turning, threading, drilling, grooving, and contour machining. Key Features Exceptional machining accuracy – maximum swing over bed of 560 mm, swing over cross slide of 340 mm, and a 430 mm wide bed ensure high rigidity and precision during demanding operations. Flexible spindle system – spindle speed range of 100–800 RPM and a 75 mm spindle bore (optional 90 mm) with an A2-11 spindle nose allow machining of a wide variety of materials, from steel to lightweight alloys. Intuitive CNC control – Siemens Sinumerik 808D control system with Polish-language interface and Siemens servo drives provides a dedicated operating mode for conventional lathe users, reducing the learning curve for CNC operation. Rigid construction – with a net weight of 3600 kg and dimensions of 3770 × 1500 × 1900 mm, the machine provides excellent stability when machining workpieces up to 1500 mm in length. Efficient tooling system – an 8-position turret (optional 6-position) with 25 × 25 mm tooling enables fast tool changes and reduces production cycle times. Fast setup and adjustment – allows convenient tool setting, work zero positioning, and corrections without the need to write complete CNC programs, making it ideal for single-piece and small-batch production. Enhanced operator safety – controlled rapid movements and spindle speed limitations enable precise and safe machine operation. Extended component life – automatic lubrication of gears and guideways reduces wear and ensures long-term reliability. Optimized cooling system – maintains thermal stability and protects tools and workpieces during intensive machining. Wide range of applications – suitable for precision turning in mechanical engineering, automotive, and tooling industries, for both serial and small-batch production. Energy-efficient performance – the 11 kW main motor provides high productivity with optimized energy consumption. Integrated machining cycles – supports operations such as facing, taper turning, threading, and drilling by entering basic parameters without requiring detailed G-code knowledge. Advanced automation options – available with hydraulic chuck, hydraulic tailstock, bar feeder, and chip conveyor systems. Machine customization options – available upgrades include Fanuc Oi-TF, Siemens Sinumerik 828D, tool probes, and CAD/CAM software integration. Standard Equipment Siemens Sinumerik 808D CNC control Siemens servo drives Manual 3-jaw chuck 8-position turret Complete set of soft jaws Manual tailstock Coolant system Automatic lubrication system for gears and guideways 24V halogen work lighting User manual EC Declaration of Conformity Technical Specifications Specification Value Swing over bed 560 mm Swing over cross slide 340 mm Maximum workpiece length 1500 mm Spindle speed range 100–800 RPM Spindle bore 75 mm (optional 90 mm) Bed width 430 mm Spindle nose A2-11 Number of tools 8 Tool size 25 × 25 mm Tailstock taper MT5 Maximum tailstock travel 150 mm Dcjdpfxoi Apf Tj Albsl Main motor power 11 kW Machine dimensions (L × W × H) 3770 × 1500 × 1900 mm Net weight 3600 kg

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 1500 / LUFT 1500 COMPACT / THEOR 15-10 Oil filter is essential for maintaining the cleanliness of the lubricating oil circulating in the system. It removes impurities and metal particles produced by normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the life of the oil separator. Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduced friction and overheating, longer oil lifespan. Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from contaminants in the surrounding air. Dcjdpfx Aleycf Nuebol Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial element of the oil compressor, designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is vital for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air through effective separation of oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with large surface area and precise micron rating. Optimal Price: We deliver high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or small production line? The CORMAK LUFT 700 screw compressor is the perfect choice. With a 5.5 kW motor and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air required for the efficient operation of impact wrenches, blow guns, spray painting equipment, and other pneumatic tools. This model is designed for continuous operation, making it ideal for demanding applications such as tire service centers, smaller automotive workshops, and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter and more stable operation. The LUFT 700 features a direct-drive system, providing significantly higher efficiency and lower power losses compared to belt-driven models. This innovative solution guarantees optimal utilization of motor power, resulting in higher performance with lower energy consumption. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and process control. Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, designed for the most demanding applications. The combination of the proven reliability of an induction motor with intelligent control makes this screw compressor an extremely efficient, economical, and flexible source of compressed air, perfectly suited to the dynamic needs of modern industry. High-quality CORMAK screw compressors, such as the LUFT 700 model, are based on technologically advanced screw airends that determine their efficiency and reliability. By combining proven engineering solutions with innovation, CORMAK ensures that every airend is refined down to the smallest detail to withstand even the most intensive operating conditions. In CORMAK screw compressors, such as the LUFT 700, a key component ensuring reliability and optimized operation is the advanced MAM-series control panel. Designed for efficient compressed air system management, this controller enables continuous monitoring and rapid response to all operating parameters. TECHNICAL SPECIFICATIONS Motor power: 5.5 kW Power supply: 400V / 50Hz Air delivery at 0–6 bar: 690 L/min Air delivery at 6 bar: 650 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 630 L/min Outlet connection (G): 1/2" Djdpfsza Aptjx Albjcl Dimensions: 1445 × 610 × 1410 mm Weight: 200 kg