Used Cordes Und Koch Corletten, Cordes And Koch, Width 1.30 for sale (36,346)

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Koch is up for sale. Below are some technical details: - Designed for 135 kg/h for 7 machines - NEW PRICE of the system: €115,000 Model: CKT 500F, frequency-controlled version - 500 cubic meters/hour dry air - Touch panel control expansion for CKT/EKO dryers - Control system expansion integrated as a conveying system in CKT/EKO dryers, up to 16 points of demand - Containers: 1 x 200 liters; 4 x 150 liters; 2 x 60 liters, with cleaning door Redoy Amr Espfx Ahcscf - Koch hopper heaters at 3 kW, 5 units - Koch hopper heater at 1.5 kW, 2 units - V2A extraction containers, 7 units - Stationary frames, 2 units - Economy system control for gentle material drying and maximum energy savings - Empty suction valves NW 40, double empty suction, 7 units - And much more...

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Rcedpjr Nfvmefx Ahcsf Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: used, Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: kom 4892, Set of dryer equipment, including: Loading bunker Oversize vibrating screen Chain conveyor to dryer Belt dryer Chain conveyors from dryer Vibration separator Rodpfx Ahjxa Drhjcocf

Condition: used, Plug-in welding control in a 19" housing Type NPS 8043-1 IQ1 with quality assurance and 50 programs Solenoid valve voltage: 24 V DC complete with current measuring belt MB 260 Rcodpodga Nbjfx Ahcsf OTHER CONTROL MODULES IN STOCK: e.g.: 8036 - 8036-S3 8033 8043 MPS 200 R1 RATIA 43a HWS 2202 Profil IQ

Condition: refurbished (used), Automatic dough divider and rounder Fortuna Automat A3-30 is a reliable and efficient solution for fast and precise dividing and rounding of dough. This machine processes up to 30 dough pieces per cycle, significantly improving production efficiency and ensuring consistent results. Rcjdpfx Ahoy Nbakocof The dough weight range of 32 to 70 g allows flexibility for various bakery products. The machine is equipped with three plates and an automatic head tilting function, making operation easier and increasing productivity. Robust construction and high-quality manufacturing ensure stable operation, long service life and easy maintenance, making this machine ideal for professional use. Technical specifications: Manufacturer: Fortuna Model: Automat A3-30 Machine type: Automatic dough divider and rounder Capacity: 30 pieces per cycle Dough weight range: 32 – 70 g Number of plates: 3 Functions: Automatic head tilting Dimensions: 80 x 70 x 145 cm Weight: 650 kg

Condition: used, Year of construction: 1993, functionality: fully functional, input frequency: 50 Hz, input voltage: 380 V, Equipment: documentation/manual, Grinder for sharpening saw blades and CrV saw discs. Rcsdpjzv H Uwefx Ahcjf

Condition: new, 04P-023-LF 04P-023-RF 004P014-L-A2 004P014-R-A2 004P023-LF-A2 004P023-RF-A2 04P033-LF-A2 04P033-RF-A2 044P-023-011LF 044P-023-011RF 044P049-021-LF-A2 044P049-021-RF-A2 044P049-033-LF-A2 044P049-033-RF-A2 06P-094-LF-A2 06P-094-RF-A2 064P-079-025-LF 064P-079-025-RF Rsdpfx Ahsf Ddzqjcocf 064P118-017-LF-A2 064P118-017-RF-A2 064P135–049–L-M1268 064P135–049–R-M1268 064P-135-049-LF 064P-135-049-RF 064P-148-034-LF 064P-148-034-RF 066P079-L-A1-M1077 066P079-R-A1-M1077 066P094-L-A1 066P094-R-A1 066P-104-031-LF 066P-104-031-RF 066P-118-035-LF 066P-118-035-RF 066P104-056-LF-A1 066P104-056-RF-A1 066P135-L-A1-M1077 066P135-R-A1-M1077 644P 079-037-014-LF-A2 (M1239) 644P 079-037-014-RF-A2 (M1239) 066P135-063-L-A1, 066P135-063-R-A1 644P-069-026-014-LF-A2-M1239 644P-069-026-014-RF-A2-M1239 664P118-056-017-L-A2- M929 M1256 664P118-056-017-R-A2- M929 M1256 08P-197-LF 08P-197-RF 086P-197-056-LF 086P-197-056-RF 886P-226-226-104-LF 886P-226-226-104-RF and other types, as one package

Year of construction: 2009, condition: new, Loop sling, round sling, lifting strap, load securing strap 2 tons, 2 x 4 meters (meter circumference) 750 pieces, package price Multiple packages available Rcsdpfx Ahjih N Hkecof Packaged on a pallet.

Year of construction: 1997, condition: good (used), I sell the multiple drilling machine with inserting KOCH WinDoor Redpfefyn Tyox Ahcocf Year: 1997 Number of drilling spindles 1 (suitable for dowels 8x60mm) Number of inserting heads 1 Motorical axes adjustment Workpc. length 200-3500mm Workpc. width 20-200mm Workpc. height 30-100mm Available immediately

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 7.50.1081, Schneider & Koch AOI TS-LV6 / LaserVision Twin LV6 Automated Optical Inspection System (used 2D/3D AOI for SMT circuit boards, fully functional, manufactured approx. 2014–2016, for precise inspection of components, solder joints, and paste) Rcjdpfeyid Duex Ahcsf Test technology: Schneider & Koch Model: TS-LV6 AOI unit Fully operational

Condition: excellent (used), Year of construction: 2015, The Heuft Reflexx – high speed empty bottle and label inspector. Model Reflexx HBBRTIXX Spectrum TX controller Capacity to 50.000 bph. YOM 2015 Redpfx Ajytrdtehcscf EXCELLENT CONDITION It’s more than just a quick check. The HEUFT system diligently inspecting empty glass bottles for any defects before they move on to be filled is comprehensive quality assurance that brings immense value to the entire bottling process. Here’s why these HEUFT inspection solutions are so critical: 1. Full Coverage, Zero Blind Spots: The system doesn’t just glance at the bottle; it performs an all-surface, all-angle inspection of the base, sidewalls, finish, and threads. This level of detail is vital for spotting tiny defects the human eye can easily miss. 2. Advanced Detection Technologies: Utilizing a powerful combination of high-resolution cameras, smart AI image processing, and in some models, patented pulsed X-ray technology. This includes: - Glass Defects: Cracks, chips, inclusions, and finish damage. - Foreign Objects: Everything from foil and cigarette butts to insects, residual liquid (like caustic lye or oil), and, most dangerously, glass splinters hidden in the bottle base. 3. Low False Reject Rate: Thanks to intelligent image analysis (like HEUFT reflexx A.I.), they can distinguish between a critical defect and a harmless cosmetic blemish, meaning you don’t waste good, perfectly usable bottles. HEUFT SPECTRUM TX Controlling centrally: one platform for all requirements. Precise, network-compatible and cross-system: the HEUFT SPECTRUM TX forms the basis for different technologies, modules and functions. The devices of the generation of the same name can be exactly adapted to individual requirements on site and retrofitted at any time due to this universal platform.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Coburg Exaflex 6126’ treatment chair. Item for sale: 1 x Coburg Exaflex 6126br /> Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Rcjdpfxjx S E I Rs Ahcof A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: good (used), Approx. 400 Corlet containers, widths 1.30m / 2m / 2.70m - used: Prices per unit, ex warehouse (net): Type 1 (1.30m wide): €59.00 Type 2 (2m wide): €89.00 Type 3 (2.70m wide): €99.00 Manufacturer: Cordes Type: e.g., mc-270.083, mc-270.513 Year of manufacture: unknown Type: mc-270.083 Load capacity 800kg Weight approx. 135kg mc-270.513: Load capacity 600kg Weight approx. 106kg Foldable Some with skids for storage in racking Not stackable Type 1, width 1.30m / height 1.80m 75 small Corlet containers: approx. 130 cm (width) × 115 cm (depth) × 180cm (height) Type 1, width 1.30m / height 2.35m 75 small Corlet containers, approx. 130 cm (width) × 115 cm (depth) × 235 cm (height) Type 2, width 2m / height 1.80m 75 medium Corlet containers, approx. 200 cm (width) × 115 cm (depth) × 180 cm (height) Rodpfxszl A Rms Ahcecf Type 2, width 2m / height 2.35m 75 medium Corlet containers, approx. 200 cm (width) × 115 cm (depth) × 180 cm (height) Type 3, width 2.70m / height 1.80m and 2m 50 large Corlet containers, approx. 270 cm (width) × 115 cm (depth) × height 1.85m and 2m Type 3, width 2.70m / height 2.35m 50 large Corlet containers, approx. 270 cm (width) × 115 cm (depth) × 235 cm (height) Condition: good Available: immediately Location: 99428 Grammetal, OT Mönchenholzhausen

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator Rjdpfx Ahewd Rlfscecf - Supports for long elements The machine does not have doweling units Dimensions of processed elements L- 350-2500 W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Rcsdpfx Aezuz H Sshcjf Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: excellent (used), Year of construction: 2017, Koch Technik safety (protective) filter type SA3. Its main tasks are: -Vacuum pump protection: Protects blowers and suction pumps against the ingress of fine dust, plastic residues or impurities that could lead to engine failure or seizure -Material dust removal: Filters return air from feeders and material separators, ensuring the cleanliness of the entire pneumatic system. These devices are usually installed in transfer lines before the vacuum generator (pump), most often in granulate dryers (e.g. CKT series) or central raw material feeding systems for injection molding machines and extruders. 4 pieces available - years 2008, 2008, 2010 and 2017 Rcodpfxszkutdo Ahcsf Sold complete with 4 Koch pumps and controls

Condition: excellent (used), Year of construction: 2021, Silos 120 x 120 x 141 cm [L x W x H] with a capacity of approx. 1000 l complete with Koch Technik plastic feeders for the central system, 3 pcs. 2008, 2010, 2021. Rsdpfx Ajzl Szuohcscf

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 65487, Equipment: documentation/manual, For sale is an Innomatec LTC-802 M Leak Test Computer in like-new condition, from our company’s inventory. The device was factory-calibrated by Innomatec in 2026 and will be sold including a current factory calibration certificate. According to the manufacturer, there are currently no restrictions regarding service or spare parts availability. Manufacturer: Innomatec Mess und Schnellanschluss Model: LTC - 802 M Year of manufacture: 2019 Condition: like new Category ID: 404 Type ID: 2224 Type: Measuring system Technical data Manufacturer: Innomatec Model: LTC-802 M Year of manufacture: 2019 Mass flow method Pressure range: 0.05 to 5 bar Single-channel leak test device Configurable testing system Suitable for large-volume components Factory calibration 2026 Scope of delivery: Innomatec LTC-802 M Original power supply Accessories as shown in the photos Factory calibration certificate Operating instructions (as shown in the photos) Application areas Automotive industry Medical technology Industrial manufacturing Quality assurance Leak testing Automated production systems Condition Like-new condition Factory-calibrated by Innomatec (2026) Completely cleaned Ready for immediate use Note: The photos of the current factory calibration certificate are part of the listing and can be found in the attached images. Sale is made by a company with an invoice. Rjdpjzltyfsfx Ahcocf Inspection possible by appointment. If you have any questions or need more information, please feel free to send us a message or call us.

Year of construction: 1990, condition: used, functionality: fully functional, For sale is a robust and fully operational roll forming machine for the production of corrugated and tile-profile sheets made of aluminum. The system is suitable for the continuous production of various profile geometries. The machine was commissioned in October 1990 at Leichtmetallwerk Nachterstedt GmbH and impresses with its solid industrial design. Thanks to the integrated profiling line, the cutting and embossing tool, and the automatic stacking device, an efficient production process is possible, from the coil to the finished profile. The system is particularly designed for the production of roofing profiles, tile profiles, and aluminum corrugated profiles, thus offering a versatile range of applications in the field of sheet metal processing and profile manufacturing. System components: - Coil - Profiling line - Cutting and embossing tool - Automatic stacking device Currently produced profiles: - Tile profile 33/175; material thickness: 0.6 mm - Asymmetrical corrugated profile 33/175; material thicknesses: 0.6 mm and 0.7 mm - Aluminum corrugated profile 28/125; material thicknesses: 0.7 mm, 0.8 mm and 1.0 mm Rcjdpfxsy Sxhwj Ahcsf Condition & Inspection: The system is ready for production, is in fully operational condition, and is currently still used for production. This allows the functionality to be verified on-site if desired. The roll forming machine can be inspected at any time by arrangement at our location in Krostitz, Hilchenbacher Straße 2A. The system is immediately available and ready for sale. We will gladly provide further technical information, images or details upon serious interest.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 370 kW (503.06 HP), fuel type: hybrid, color: other, Equipment: ABS, cabin, hydraulics, The CONSTMACH JCV-1 mobile crushing plant is a three-axle mobile system specifically designed for professional crushing and screening plants seeking high capacity and superior performance. The CV-1 provides maximum efficiency in crushing high-hardness rock types such as granite, basalt, dolomite, and similar materials. It is also an ideal solution for producing high volumes of fine material and achieving excellent cubic-shaped aggregate. The plant is based on sophisticated engineering, long-lasting components, and the durability that comes with CONSTMACH quality. The JCV-1 system consists of a combination of a mobile jaw crusher, a cone crusher, and a vertical shaft impact crusher (VSI) unit. This structure allows material to be obtained in five different fractions simultaneously. The PLC-controlled automation system is equipped with SIEMENS and SCHNEIDER brand electronic components, and the plant can be managed from a single tablet. Its modular and portable design makes it compliant with international road transport standards. The hydraulic foot system allows for easy installation and commissioning. Optional diesel generator options can also meet energy requirements on site. JCV-1 Mobile Crushing and Screening Plant Technical Specifications Production Capacity: 60-80 tph Maximum Feed Size: 610 x 380 mm Main Configuration: Jaw Crusher + Cone Crusher + VSI + Vibrating Screen Total Motor Power: 370 kW Electric Generator Requirement: 750 kVA Plant Weight: 90 tons (total) Rcodpoxqgwhefx Ahcof Dimensions: 1. Chassis – 10 (L) x 3.1 (W) x 4.4 (H) m 2. Chassis – 17 (L) x 3.8 (W) x 4.4 (H) m 3. Chassis – 17 (L) x 3.8 (W) x 4.4 (H) m Chassis Type: Hydraulic folding legs, three wheeled chassis Why Choose the CV-1 Mobile Jaw Crusher? CONSTMACH CV-1 is an excellent choice for users seeking maximum efficiency and flexibility in mobile crushing plants. Its easy transportability, short setup time, and advanced automation technology save time and labor. While offering reliable performance for years with its high-quality components, its user-friendly design minimizes maintenance and operating costs. If you are looking for high-quality material production, durability, and engineering excellence, experience the CONSTMACH difference in the field with the CV-1 Mobile Jaw Crusher. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, load capacity: 16 kg, arm reach: 1,610 mm, The KR 16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16 Standard & Foundry ( more option is also available ) Condition: Used & Tested Year: 2006 Controller Cabinet: KRC2 ed05 Rjdpfx Ahoq A Uiuscecf Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant (Gripper and the base is not included) Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The mobile dry air dryer of type KKT dries hygroscopic granulates directly next to your processing machine, and is also equipped with a TYPE 608 conveying unit. The saturated dry air flows through two alternating desiccant containers, where it is re-dried. This creates ultra-dry air with a dew point of approx. -35 °C. Rcodpfx Ahsyxay Ijcef Dry air dryer: KKT 100S Dry air flow rate: 100 m³/h Desiccant containers: both NEW Container volume: 200 liters Mobile design Convenient touchscreen menu navigation Conveying unit: TYPE 608 Number of material types: 1 Blower: 1.1 kW Capacity: 8.5 liters Voltage: 230/50

Condition: reconditioned (used), Year of construction: 1980, functionality: fully functional, For sale: a drilling and milling machine from Alzmetall. Type: Plus 3 DG. Inspection and test run possible at any time. Redpfezk U Dpox Ahcocf Forklift available for loading.

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Rsdpfx Aozdc D Sjhcscf Drying 2 Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual

Condition: excellent (used), functionality: fully functional, Georgian bar assembly table Complete In very good and clean condition Good working order, tested As it is Rjdpfx Aeztyzrshcocf Available immediately