Used Cold Circular Saw Head for sale (16,309)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5100 € 98.43 € 315 mm 315x32x63 mm 45 / 90 U/Min rund 105 mm / quadratisch rund 90 mm / quadratisch 4.7 kW 600 mm 1000 mm 1400 mm 200 kg Pneumatic vice Psdpfx Ajynngaeg Regu Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split visc (clamps before and after the sawblade) Self-centering visc for optimal cutting position Large base frame for high stability Sawblade not included

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm Pgjdpouay Drsfx Ag Rsu 180x100 mm Working height 925 mm saw blade turning speeds 15+30 oder 30+60 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m SPECIAL PRICE!!! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: used, Max. saw blade diameter: 350 mm Semi-automatic saw feed 2 sawing speeds Podpfxoz Hx Eto Ag Rsgu Submitted for cutting of stainless steel Coolant lubrication

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m SPECIAL PRICE!!! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling Pgjdpfx Ajt Eafnog Rsu · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, saw blade diameter 315 mm capacity 90 degrees: round 108 mm capacity 90 degrees: square 93 mm 150 x 90 mm Working height 920 mm saw blade turning speeds 17+33 oder 33+66 U/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,328 t dimensions of the machine ca. 0,8x0,9x1,7 m ACTION PRICE!!! High-performance vertical circular saw VKS 315 (Article 20150) • miter left 60° + right 45° • Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift • Saw table with large rotating plate and particularly stable vice for optimal material tension • Robust prism guide of the saw head (dovetail guide adjustable) • Automatic cooling Pgjdpfx Asd Iin Seg Rsu • Machine base with chip drawer • Metal handle for high clamping force ATTENTION: Price is without saw blade!!! (saw blade price EUR 109)

Condition: good (used), Storage location: 3127 Manufacturer: Kaltenbach Type: KKS 400 Podpjzmaqtsfx Ag Rjgu Year of manufacture: Machine number: 40061 Saw blade: 400 mm Cutting capacity: Round: 130 mm Square: 120 mm Flat: 315 x 40 mm Profile: 40 x 160 mm Tubes: 20 x 2 / 40 x 3 / 60 x 4 / 80 x 5 / 130 x 7 mm Cutting speed: 10/20 13/26 15/30 m/min Saw blade feed, infinitely variable: 0 to 1000 mm/min Mitre angle: 90° on both sides Accessories / Equipment: Connection: 1.7 / 2.6 kW Hydraulics: 0.75 kW Weight: 0.85 t Machine dimensions: 1,200 x 1,000 x 1,800 mm

Condition: used, Year of construction: 1988, saw blade diameter 400 / 460 mm cutting length 650 mm cutting diameter 150 mm capacity 45 degrees: flat 450 x 150 mm Psdpet H Spbjfx Ag Rogu capacity 90 degrees: flat 650 x 150 mm Slide cross 855 mm work height max. 950 mm total power requirement 1,3 / 1,6 kW weight of the machine ca. 1800 kg dimensions of the machine ca. 2300 x 1050 x 1900 mm

Condition: used, Year of construction: 2010, saw blade diameter 315 mm dimensions of saw-blade 350 x 40 x 2,5 mm cutting diameter 90 mm capacity 90 degrees: flat 150 x 90 mm capacity 45 degrees: round rechts & links 90 mm capacity 45 degrees: flat rechts & links 105 x 90 mm Podpev Td Hvsfx Ag Rogu capacity 60 degrees: round 90 mm capacity 60 degrees: flat 75 x 70 mm cutting speed 33 / 66 m/min total power requirement 1,8 kW weight of the machine ca. 340 kg dimensions of the machine ca. 900 x 800 x 1700 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Saw blade - Machine base - Operating instructions

Year of construction: 1991, condition: ready for operation (used), Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible. Psdpfjyarq Tox Ag Rsgu

Condition: as good as new (ex-display), A demonstration double miter metal cold circular saw with 350mm circular saw blade Cutting range round/rectangle 90° 120/ 140x100 mm round/rectangle 45° right and left 100/ 100x100 mm Pjdpfx Agjpgmnge Rjgu speed 18/ 36 m/min Further tech. Data see pdf. Document Tech. Data and dimensions Errors excepted

Condition: used, Year of construction: 2003, saw blade diameter 510 mm cutting diameter 150 mm capacity 90 degrees: flat 450 x 150 mm capacity 90 degrees: square 150 mm Pjdpfeyrhurjx Ag Rjgu turning speeds 29 / 58 m/min. total power requirement 4,2 kW weight 1,55 t range L-W-H 1,8 x 1,7 x 1,7 mm Long-cut cold circular saw, semi-automatic - with miter adjustment left 50°, right 60° - digital cutting angle display - hydraulically adjustable feed speed - hydraulic workpiece clamping - 4 spare saw blades

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 450 mm, cutting range round steel at 90°: 150 mm, Kaltenbach KKS 450 E, fully refurbished with 12 months warranty. The KKS 450 E is a semi-automatic mitre saw for ferrous and non-ferrous metals such as: steel, stainless steel, chromium steel, brass, copper, bronze, etc. Key advantages at a glance: - Clamping, sawing, turning, and opening – all with a single lever - Adjustable saw height using a lever - User-friendly mechanical controls mounted directly on the machine - Easy access for saw blade changes and maintenance work Pgedpfx Ajynut Tsg Reu - Workpiece clamping system on both sides of the saw blade - Two sawing speeds suitable for virtually all applications - Ergonomically positioned controls for ease of use - Adjustable stroke limit and rapid return of the saw blade All refurbished Kaltenbach machines are supplied as standard with a 12-month warranty.

Condition: good (used), Year of construction: 2019, saw-blade dia. 370 mm cutting capacity - round 115/ 90° mm cutting capacity - square 110 x 110 /90° mm cutting capacity - flat 110 x 110 / 90° mm cutting capacity - flat 100 x 100 / 45° mm cutting capacity - round 115 / 45° mm cutting capacity - square 100 x 100 /45° mm saw blade turning speeds 22 / 44 U/min voltage 400 V / 50 Hz Motor output 3 kW machine weight ab. 0,27 t Dimensions (L/W/H) 980 x 790 x 780 mm Pgodpfsvxli Nsx Ag Rju • New, unused saw • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 45° left, 45° right

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, saw blade diameter: 400 mm, cutting range round steel at 45°: 130 mm, cutting range round steel at 90°: 130 mm, overall weight: 2,500 kg, cutting range square steel at 90°: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16, 2026, and November 26, 2026! The machine has been completely overhauled and repainted! TECHNICAL DETAILS Round material at 90°/45°: 130 mm Square material at 90°: 120 mm Pgjdpfx Agjz Il Hyo Reu Profiles at 90°: 300 × 45 mm Profiles lying at 45°: 220 × 60 mm Profiles standing at 45°: 80 × 120 mm Saw blade: 400 × 4 × 50 mm Saw blade mount: 50/4 × 14/80 mm Saw motor: 3.7/4.5 kW Cutting speed: 1,750/3,500 m/min Saw blade feed: 0–3,700 mm/min Rapid return of saw blade: 4,500 mm/min Short-stroke clamping device stroke: 8 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 20 A Dimensions & Weight Dimensions (L x W x H): 7,500 x 1,200 x 2,000 mm Weight: 2,500 kg EQUIPMENT Workpiece clamping with short-stroke clamping device Hand crank for pre-setting Horizontal clamping cylinder at the front Minimum lubrication instead of a coolant mist spray system Feed roller track T3 Rollers of the feed roller track: 60 × 289 mm Starting section of the roller track, length 2,000 mm, with 5 rollers Stand for roller track Mounting bracket Extension of the roller track, length 2,000 mm, with 4 rollers Stop roller, adjustable as a guide for material bars Length measuring device Discharge roller track T3 External Reference: Steinbach & Holler - Lot 39

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Pgeds Afznuspfx Ag Rsu Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: used, Year of construction: 1995, saw blade diameter 350 mm cutting diameter 120 mm capacity 90 degrees: flat 170 x 100 mm capacity 45 degrees: round 120 mm Psdpezmy E Dofx Ag Rsgu capacity 45 degrees: flat 95 x 100 mm turning speeds 34 / 88 U/min total power requirement 0,75/1,5 kW weight of the machine ca. 340 kg. dimensions of the machine ca. 0,7 x 1,0 x 1,85 m Features: - Coolant system - Replacement saw blades

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Pgodpjy E Uk Isfx Ag Reu Accessories / Special Features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation • Single and multiple stroke feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program. Pgjdpjfg Rlcjfx Ag Rju

Condition: good (used), Year of construction: 1995, machine/vehicle number: 117848, Offer 26171 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90°: - Round 130 mm Pedpszibdgofx Ag Regu - Square 120 mm - Rectangular 300 x 40 mm - Or 240 x 85 mm - Cutting range at 45°: - Round 130 mm - Square 110 mm - Rectangular 245 x 40 mm - Miter adjustable left and right, each 0 - 90° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.8 / 2.7 kW - Feed rate of the saw blade, hydraulically steplessly adjustable - Vertical hydraulic metal clamping device + 2 hydraulic horizontal metal clamping devices - Coolant system - Infeed – roller conveyor with storage area 5000 mm - Outfeed – roller conveyor with measuring stop and positioning control 4000 mm - Space required approx. W 900 x H 1950 x D 1200 mm - Weight approx. 850 kg

Condition: used, Year of construction: 1983, saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm cutting range - square - 120 x 120 mm Pgjdpfx Aotqqrzeg Rou cutting range - flat - 300 x 40 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm capacity 45 degrees: flat 245 x 40 mm mitter cutting - all-position 90 ° cutting speed 13 / 25 m/min control minipos 807 total power requirement 4,3 kW weight of the machine ca. 850 kg dimensions of machine L x W x H 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant

Condition: good (used), Year of construction: 2016, saw-blade dia. 315 mm cutting capacity - round 100/ 90° mm cutting capacity - square 90 x 90 /90° mm cutting capacity - flat 85 x 110 / 90° mm cutting capacity - flat 85 x 85 / 45° mm cutting capacity - round 100 / 45° mm cutting capacity - square 85 x 110 /45° mm saw blade turning speeds 25 / 50 U/min voltage 400 V / 50 Hz Motor output 1 kW machine weight ab. 0,24 t Dimensions (L/W/H) 980 x 790 x 780 mm • unused exhibition machine • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 45° left, 45° right Pedpfxovxlkaj Ag Rogu

Condition: used, Year of construction: 2000, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm stroke 100 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 / 30 / 45 / 90 m/min total power requirement 2,6 kW weight of the machine ca. 375 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions Psdpfx Agov Rrruo Rsgu

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm 180 x 100 mm Working height 925 mm saw blade turning speeds 15 - 150 U/min total power requirement 5,5 kW Pjdpfx Agefg Rldj Rogu weight of the machine ca. 0,615 t dimensions of the machine ca. 1,4 x 1,4 x 2,0 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. Basic equipment: •Saw head slides on recirculating ball linear double guides •Three-stage gearbox •continuously variable speeds 15-150 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 370x32x3 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW Pgodpfxofg Rlbe Ag Rou weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis

Condition: good (used), Year of construction: 1974, Offer 26003 Technical Data: - Saw blade diameter: up to 370 mm - Cutting capacity at 90°: - round: 110 mm - square: 100 mm - rectangular: 280 x 40 mm or 240 x 85 mm Psdpfxjy Nlnxo Ag Rsgu - Cutting capacity at 45°: - round: 110 mm - square: 100 mm - rectangular: 220 x 40 mm - Mitre adjustment left and right: each 0 - 90° - 2 cutting speeds: 13 + 26 m/min - Drive: 380 V / 1.2 / 1.8 kW - Saw blade feed rate hydraulically, steplessly adjustable - Coolant system - Required space approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg