Used Chen Hsong Chen Hsong Em120-V (2011) for sale (36,466)

Condition: used, Year of construction: 2021, Exhibition unit (little used) Lubrication: Grease Max. output speed n2: 4,000 rpm Gear ratio (n1:n2): 1:0.8 Weight: approx. 8 kg Machine connection: HSK F63 Tool holder Usable width: 24 Godpfx Aksvvi Iweyskc Storage location: Garbsen

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 4480, total length: 14,500 mm, total width: 7,800 mm, total height: 3,500 mm, overall weight: 20,000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA Equipment: 5-Axis Unit with Cardanically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 3-Axis Unit with Vertically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Godpsywzq Sefx Akyokc Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 8-Spindle Drilling Unit (1 unit): L-Shape, Grotefeld Drill spindles: individually selectable Rotation direction: clockwise/counterclockwise Pitch: 32 mm Power: 2.5 kW Speed: 5,000 rpm fixed Z-axis stroke: +75 mm Holder: D = 10 mm H7 Plunge stroke: 80 mm Grooving Unit (5 units): GROTEFELD Angle Saw Unit F100-S The working/milling stroke is pneumatic. Drive: three-phase motor with multi-ribbed belt LEFT version Drive rotation direction: clockwise/counterclockwise Speed reduction: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm, n2 = 8,011 rpm at 50 Hz Spindle power: 2.2 kW Feed: 150 mm Tool holder: Ø30 x 1.5 mm – 5.0 mm Tool holder rotation: opposite to drive rotation direction Feed force: 2565 N Underfloor Drilling Unit in Machine Bed (1 unit): GROTEFELD Angle Milling Head G06-1.1-P The working/drilling stroke is pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation direction: clockwise Speed reduction: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) For ER25 collet DIN 6499-B Ø0.5–16 mm max. Tool holder rotation direction: clockwise Flange clamping piece: FK45 Feed slide: with pneumatic cylinder and double steel guideways Feed: 80 mm

Condition: used, Year of construction: 2006, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 15425021604, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,700 mm, total length: 2,800 mm, total width: 2,800 mm, table length: 1,200 mm, rotational speed (min.): 12,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,075 h, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: DC, Equipment: documentation/manual, DMG Deckel Maho DMC 1035 V vertical machining center, year of manufacture 2006 The machine has only processed plastics – in good condition! Year of manufacture: 2006 Machine number: 15425021604 Condition: Good Delivery terms: Free loading onto truck Location: 72178 Waldachtal !!!!!The machine must be collected on 21.10.2026! We can offer transport if required!!!!! Payment terms: Payment in advance – by bank transfer Internal number: 180-1 Can be inspected while powered on: Yes Technical data: - Operating hours (machine on): approx. 39,447 h (will increase slightly) - Spindle hours: 16,075 h (will increase slightly) - Tool holder: SK40 - Max. spindle speed: 12,000 rpm - Tool magazine: 30 positions - Table dimensions: 1200 x 560 mm - Control system: Heidenhain iTNC 530 - Travels X / Y / Z: 1035 / 560 / 510 mm Gkodpfsz I Dl Ijx Akyec - 400 V / 50 Hz / 35 kVA Scope of delivery: - Manuals and documentation - Wireless measuring probe Heidenhain TS640 - Handwheel - Programmable 4th axis Lehmann - Angle plate - Manual dividing head - Swivel vice Note: The vices on the machine table and the tool holders in the magazine are not included in the scope of delivery! Dimensions & weights: - Installation dimensions L x W x H approx.: 2800 x 2800 x 2700 mm - Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►If required, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with exclusion of all warranties. ►Technical data without guarantee. ►Subject to prior sale. ❗The goods are sold exclusively to businesses❗

Condition: used, Year of construction: 1963, balancing body min/max. 30 - 5000 kg balancing body diameter with machining unit 2100 distance of bearings kleinster 240 mm dia. axle journal 35 - 180 mm weight of the machine ca. 400 KG Gedjzkbqpepfx Akyekc

Condition: excellent (used), Year of construction: 2019, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, controller model: Sinumerik, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece weight (max.): 600 kg, table load: 600 kg, overall weight: 5,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,200 h, coolant supply: 12 bar, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Bertikales BAZ DMG MORI CMX 600 Year of manufacture: 2019 Gkodpfsz Ihumjx Akyjc Control system: DMG MORI SLIMline® Multi-Touch control Operating hours: 19,200 h Spindle hours: 9,200 h Coolant pressure: 12 bar Technical data: Spindle speed: 10 - 12,000 rpm Drive power: 9/13 kW Torque: 54/80 Nm Tool holder: SK 40 Number of magazine positions: 30 Travel ranges: X-axis: 600 mm Y-axis: 560 mm Z-axis: 510 mm Direct path measuring system in all axes Production package 1

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Godpfx Akoz Rmg Usyekc Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press offers simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 208, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,100 mm, table length: 450 mm, table load: 700 kg, overall weight: 7,000 kg, - Year of manufacture: 1994 - Single owner, used in-house - Fully operational, powered on, ready for demonstration - Control system: Fanuc 0MC - X-axis travel: 800 mm - Y-axis travel: 450 mm - Z-axis travel: 510 mm - Table working area: 1100 x 450 mm - Max. permissible workpiece weight: 700 kg - Number and width of T-slots: 5 x 18 mm - Spindle speed range: 20 - 6000 rpm - Rapid traverse speed: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min - Tool holder: SK40 / MAS BT40 - Tool magazine: 25 stations Gjdpez Ru Utsfx Akyekc - Machine weight: 7000 kg - Serial no.: 208 Net price ex works, unloaded, at location Luckenwalde (Germany), excluding transport

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 8,060 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 760 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, total height: 3,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 20, tool weight: 6,000 g, product length (max.): 11,500 mm, number of axes: 5, This 5-axis Hamuel Reichenbacher Vision Flex was manufactured in 2021. It features an impressive X-axis travel of 8,060 mm, Y-axis travel of 1,210 mm, and Z-axis travel of 760 mm. The machine is equipped with a spindle speed of up to 24,000 rpm and a 20-station automatic tool changer. If you are looking to get high-quality machining capabilities, consider the Hamuel Reichenbacher Vision Flex vertical machining centre we have for sale. Contact us for further details. • Number of Axes: 5-Axis (C-axis ±360°, B-axis ±180°) • X-Axis Travel: 8,060 mm • Y-Axis Travel: 1,210 mm (+ 400 mm exchange stroke) • Z-Axis Travel: 760 mm • Axis Rapid Feed Rates: X = 80 m/min, Y = 60 m/min, Z = 40 m/min • Axis Acceleration: 6 m/s² • Spindle Speed: Up to 24,000 rpm • Main Spindle Power: 15 kW (S1 continuous), 18 kW (S6 max) • Spindle Torque: 14.3 Nm (S1), 17.2 Nm (S6) • Spindle Tool Holder: HSK-F63 • Max Tool Length / Weight: 240 mm / 6 kg • Tool Changer: 20-station disc changer (automatic) • with 19" TFT display and HT-2 handheld terminal • Supply Voltage: 400 V (3~ ±10%, 50 Hz) • Rated Current: 90 A • Input Fuse: 100 A (Ic < 17 kA) • Control Voltage: 24 V DC • Total Power: 45 kW Gkjdpfx Akszu N Uqsysc • Compressed Air Supply: min. 7 bar, ca. 1,000 NL/min • Lubrication System: Central automatic lubrication system (3 L grease capacity) + Minimal Quantity Lubrication (MQL) with 3 L tank • Machine Weight: 10,000 kg • Machine Dimensions (Floor Space): approx. 11.5 m (X) x 3.0 m (Y) x 3.0 m (Z) Additional Equipment: • LEHMANN chip conveyor, EATON manual pendant station, pneumatically adjustable profile clamping blocks (8 beams), 2-channel control setup for concurrent setup/machining

Condition: good (used), Year of construction: 2009, bore capacity in steel (diameter) 40.0 mm thread cutting attachment M 30 spindle taper MT 4 MK table surface area 1200 x 500 mm turning speeds 50 - 2000 U/min arm length 1050 mm column diameter 220 mm spindle stroke - max. 200 mm feed range 0.08 - 0.50 mm/U distance spindle /table 760 mm weight 2740 kg range L-W-H 2450 x 2450 x 2800 mm Original price approx. 20.000 Euros Special price on request Equipment: - Robust electro-hydraulic radial drilling machine - Sturdy construction ensures vibration-free operation - Compact design with electro-hydraulic quick-clamping system - Infinitely variable speed adjustment (50–316 + 316–2000 rpm) - Digital speed display Gkedpfxez R D Ice Akyec - Motorized height adjustment of the drill head - Drill head swivels 180° - Arm movable forwards/backwards and swivels horizontally - Clockwise/counter-clockwise spindle rotation - Manual & automatic spindle feed - Large work table with 3 T-slots - 1x heavy-duty machine vice * STANKO IMPORT "200-0225C" * Jaw width: 250 mm * Jaw height: 60.0 mm * Opening width: approx. 300 mm - Thread-cutting attachment - Separate coolant system - Front-mounted emergency stop button - T-slots for mounting on the side and rear of the machine - Operating manual

Condition: used, Year of construction: 2012, feed length X-axis: 635 mm, feed length Y-axis: 510 mm, feed length Z-axis: 460 mm, controller model: Sinumerik, table width: 560 mm, table length: 790 mm, spindle speed (max.): 10,000 rpm, spindle mount: MK 4, We offer this used DMG DMC 635 V eco vertical machining center, manufactured in 2012. Serial number: 1537000588A X/Y/Z: 635 × 510 × 460 mm Table: 790 × 560 mm Spindle speed: up to 10,000 rpm Gkedpfx Akez Iy A Asyec SK40 Sinumerik Spindle refurbished in October 2019. First owner If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 308, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,600 mm, table length: 650 mm, table load: 1,850 kg, overall weight: 13,000 kg, - Year of manufacture: 1994 - Single owner, used exclusively in-house - Fully operational, powered, ready for demonstration - Control: Fanuc 0MC - X-axis machining range: 1300 mm - Y-axis machining range: 650 mm - Z-axis machining range: 660 mm Godpez Rvb Ujfx Akyskc - Table working surface: 1600 x 650 mm - Max. permissible workpiece weight: 1850 kg - Number and width of T-slots: 5 x 18 mm - Spindle speed range: 20 - 6000 rpm - Rapid traverse speed: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min - Tool holder: SK50 / MAS BT50 - Tool magazine: 30 stations - Machine weight: 13,000 kg - Serial number: 308 Net price ex location Luckenwalde (Germany), not loaded, without transport

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flushing through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Gjdpfjzw Rl Asx Akyokc Direct sale to end-users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg Gkjdpfex Ein Ssx Akyec - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: excellent (used), Year of construction: 2020, operating hours: 41 h, functionality: fully functional, Baling press HSM V-Press 825 Plus Pro Year of manufacture: 2020 Operating hours: 41 hours Bale counter: 145 bales Machine is fully functional, inspected, and maintained. Technical data: Width x Depth x Height: 1700 x 1248 x 2370 mm Bale length x Bale width x Bale height: 1200 x 780 x 700 mm Width x Height of the feed opening: 1195 x 540 mm Gkedpfx Akoz H Saqoyjc Weight: 1210 kg Type of consumable material: Strapping band Material to be baled: Film, mixed paper, cardboard, stamping waste, clothing Pressing force: 250 kN Voltage: 400 V / 50 Hz Power: 4.0 kW Rated current: 9.0 AMP

Condition: excellent (used), Year of construction: 2016, Make: HSM Model: V-press 860 plus Gksdpfsz Ndwpsx Akyjc Year of manufacture: 2016 Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Video available upon request.

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 3,300 kg, We are offering this used Engel ES 200/45 HL-V injection molding machine, manufactured in 1999, for sale. Serial number: 38717 Gksdpfx Akoz I Uugjyec Year of manufacture: 1999 Weight: 3300 kg Type: ES 200/45 HL-V If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2020, condition: excellent (used), Stationary Piston Compressor Aircraft AIRPROFI 703/270/10 V Used: Year of manufacture 2020 - Top condition - Stationary compressors with a vertical 270 l tank offer maximum performance in a compact space. Robust design and best quality Fully automatic on/off operation Equipped with all safety devices Completely ready for connection Fifteen-year guarantee against rust on the internally and externally hot-dip galvanized compressed air tank Quality electric motor High-quality electric motor with high starting torque is equipped with a motor protection switch Starting capacitor and starting relief valve ensure easy starting Standard equipped with a phase inverter for easy manual reversal of the direction of rotation Compressed air compression via high-performance HOS unit The starting relief valve ensures easy, pressure-free starting The two-cylinder high-performance unit made of gray cast iron and the low speed guarantee particularly quiet and low-vibration operation; this ensures a long service life due to minimized wear Optimal lubrication of the compressor for high service life and reliability Equipped with a high-quality intake filter Aftercooler with large cooling fins results in a low tank inlet temperature and less moisture in the compressed air to protect the compressed air tools Additionally with an intercooler to the aftercooler Corrosion-resistant valve plates for improved heat dissipation and longer service life of the compressor Optimal cooling of the compressor by a large fan wheel and a cooling air deflector on the cylinder Stable metal belt guard for optimal protection of the components and for high user safety No vibration breaks in the compressed air supply line to the tank due to flexible armored hose with heat protection High-quality drive belt Powerful and efficient drive The toothed drive belt facilitates starting, improves running smoothness and power transmission, and reduces power consumption by up to 30% Stable metal belt guard Operation on the service block Equipped with a high-quality CONDOR pressure switch with a robust push-button function for fully automatic on/off operation Air outlet on the service block via a comfortable safety quick coupling Only fixed screw connections on the service block, no hose connections High-quality tank with permanent rust protection Air outlet ¾" Length (product) approx. 780 mm Width/Depth (product) approx. 680 mm Height (product) approx. 1870 mm Weight (net) approx. 152 kg Automatic pressure switch CONDOR Drive transmission V-belt, toothed Material of compressed air line Flexible armored hose with heat protection Compressed air outlet Ball valve Condensate drain Condensate drain valve Compressed air tank Internally and externally hot-dip galvanized with a fifteen-year guarantee AD 2000 compliant yes Tank base Vibration dampers Connection plug 400V CEE plug with phase inverter Connection voltage 400 V Mains frequency 50 Hz Output power 4 kW Input power 4.81 kW Godpfsz Rq Eujx Akyjkc Sound pressure level Lp 83 dB(A) Explanation of sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor system HOS Intake capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation of filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 950 min¯¹ Maximum pressure 10 bar Tank capacity 270 l Location: available from stock in 54634 Bitburg - immediately available -

Condition: used, mileage: 182,130 km, power: 294 kW (399.73 HP), first registration: 02/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro5, loading space length: 4,800 mm, loading space width: 2,400 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), Phone: call (Contact · Telephone · Mobile · WhatsApp) Special Equipment: Storage box, rear axle load 13.0 t, trailer coupling: Ringfeder 5050 A, car phone antenna, traction control system (ASR), trailer data display, work lights (2) on cab roof, audio system: MAN Topline radio 12V with navigation system, exterior mirrors and wide-angle mirrors electrically adjustable and heated, wide-angle mirror with electric maneuvering aid, 175 Ah battery, mechanical battery master switch, electrically adjustable and heated curb mirror (right), bolted bridge mounting brackets, air horns on cab roof (2), cab: reinforced suspension, cab: with 2 rear wall windows, tinted, cab: with exterior grab handle, comfort driver’s seat, air-suspended, heated and ventilated with lumbar support, flame start system, generator 28 V / 110 A, 12-speed transmission - type: ZF 12 AS, Tipmatic, rear axle AP HPD-1382/HP-1352, hydraulic pump (Meiller-pump 265/1), rocker lever - brake EVBec controlled, automatic climate control, multifunction steering wheel, high-mounted air intake, dust pre-separator air filter, air deflector against dust swirl, heated air dryer, PTO NH/4C without flange, retarder, seat cover/upholstery: comfort quality, external sun visor, sun roller blind for side window, driver’s door, sound system, stone guard grille in front of radiator, control module for external data exchange, foldable rear underrun protection, rear wall window curtain, extra step for construction vehicles, heated additional fuel filter with water separator Additional Equipment: Axle configuration: 6x4, approach/front mirror, trailer socket 24V / 7-pin, trailer ABS socket, MAN-Tronic on-board computer, rear axle differential lock, MAN Brakematic electronic braking system, EURO 5 engine, cab: M (medium length), suspension: leaf/leaf, electric window lifts, tinted windscreen, manual roof hatch, body type: tipper, rocker lever - brake EVB, heated fuel filter, fuel tank: combination tank - 300 L diesel + 40 L urea solution (AdBlue), air compressor 1-cylinder 360 cc, engine 10.5 L - 294 kW diesel, side-mounted spare wheel hoist, front axle disc brakes, rear side windows tinted, sunblind for front windscreen, spray mist reduction, stabilizer on both rear axles, front axle stabilizer, 3-piece steel bumper, rear axle drum brake, tinted door windows, viscous fan, front axle VO-09 straight, central locking, permissible total weight 26,000 kg * VIN: WMA26SZZXBM559896 * 3-way tipper * With Boarmatik * 6-stage retarder * Full leaf spring suspension * Automatic climate control * Seat heating / seat ventilation * Euro 5 EEV * Curb weight: * Payload: Gjdpfeqcrifsx Akyekc * Total weight: 26,000 kg * Wheelbase: * Tipper length: 4.80 m * Tipper width: 2.40 m * Truck year: 2011 * Valid inspection (TÜV) until 02/2023 * ----Palfinger PK 15002 * Serial number: 0811158 * High boom * Rotator + grab connections * 4 hydraulic extensions * Lifting capacity: 2820 / 1820 / 1240 / 880 / 660 kg * Outreach: 4.3 / 5.9 / 7.9 / 10.2 / 12.4 m * Crane year: 2002 * ----Net price * All information subject to change

Condition: used, mileage: 1,001 km, first registration: 01/2011, empty load weight: 330 kg, maximum load weight: 1,900 kg, overall weight: 2,230 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2011, Vehicle location: Bovenden. Equipment: Kinshofer stone clamp with swivel servo, immersion depth 1,650 mm, with rotary motor and pressure rails. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Gkodpfxslfdi Uj Akyjc

Condition: excellent (used), Year of construction: 2021, We are offering this very well-maintained XYZCAM V-1325 S ATC machine for aluminum, plastic, and wood processing, manufactured in 2021. Gksdpfez Irudsx Akyoc Manufacturer: XYZCAM Model: V-1325 S ATC Year of manufacture: 2021 Condition: very good Category ID: 218 Machine type: Aluminum, plastic, and wood processing If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), functionality: fully functional, Speed adjustable in a continuous range from 60 to 1600 rpm, threading function, feed mechanism, swivel table. Gjdpoz Rmnrefx Akyskc

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Vertical machining center Manufacturer: DMG Gildemeister Type: DMC 635 v eco Machine No.: 1537000170A Year of manufacture: 2009 Control system: Siemens 810D Shopmill Axes: 3 Travel ranges X: 635 mm Y: 510 mm Z: 460 mm Tool changer: 20 positions, SK 40 Spindle speed: 20-8,000 rpm Drive power: 13/9 kW (40/100% ED) Gedpfoz I Rnvjx Akyokc - Direct path measuring system for X, Y, and Z axes - Compressed air for measuring systems - Coolant/air switchover - Table size 560x790 mm - Electronic handwheel Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travels X = 1,450 mm, Y = 700 mm, Z = 550 mm rapid traverse 42 m/min spindle speed range 20 to 14,000 rpm inline spindle with a power of 20.3 kW / 14.5 kW (40/100% load) tool clamping SK40 DIN69871 Gkjdeylpf Sopfx Akyjc tool shank according to DIN69872 tool change with a 60-position SK40 magazine (turret with housing and dual gripper) table clamping area 1,760 x 750 mm direct measurement in the X, Y, Z axes Machine is connected and ready for testing.

Condition: ready for operation (used), Year of construction: 2017, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2017 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Gkjdpfsz Imlqox Akyoc Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Gedpfx Aoz H I Dlskyokc Our payment terms are 100% prepayment.