Used Case Cs210 Channel Bucket for sale (4,160)

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Dkedpfx Alozlr N Sj Aeu

Condition: used, functionality: fully functional, power: 145 kW (197.14 HP), fuel type: diesel, color: gold, operation weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2000, operating hours: 8,000 h, Equipment: air conditioning, cabin, centralized greasing system, standard shovel, Case 821C wheel loader Year of manufacture: 2000 8,000 hours 145 kW Approx. 18,000 kg Air conditioning Central lubrication system Tires: 23.5R25 Dkodpjz Atwxjfx Al Aju

Year of construction: 2016, condition: used, In stock first week of September Dsdpfow S Dn Iox Al Aeku

Condition: good (used), Year of construction: 1986, working width: 500 mm, overall weight: 12,500 kg, machine/vehicle number: 017128, CASE IH 1660 axial flow Brand: Case IH Model: 1660 Dkodpfx Asvr Dxpjl Aju Year: 1987 Operating hours: 3,300 h Cross-section width: 5.00 m Various types of equipment: straw chopper, straw spreader

Condition: used, Year of construction: 2002, operating hours: 1,628 h, 2002 | Case 1825B | Used Wheeled Skid Steer | 1628 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 21 approved ✅ 7 imperfect ℹ️ 7 issues ⚠️ Dsdjzv Emxjpfx Al Aeku 📌 Inspector's Comment: Poor general condition of the telescopic. The left lifting cylinder does not hold the load and is leaking. The seat is damaged. The right drive control is difficult to operate. The rigid piping is damaged. The right rear tire needs to be replaced. Impact on radiator and engine hood. Unable to start and keep running without booster. Missing a nut on the right rear rim. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41114 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Soco Case Sealer / Box Taper In excellent condition Top and bottom tape heads Manual side drives adjustment Dodpfozzl N Rex Al Asku Manual top head adjustment Three phase power Mobile on lockable castors

Condition: used, functionality: fully functional, The device is complete and operational – it was previously used in conjunction with a Pitney Bowes XPV inserting machine. Dksdpfey Izcpjx Al Asu

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Dkjdpfx Aljzt Iaie Aju Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: used, Year of construction: 2007, functionality: fully functional, Envelope inserting machine KERN 3500 Twin Channel K990 Year of production: 2007. Counter: 145 million Full service contract. When purchased together with the Kern 2600, an attractive price for the machines can be negotiated. Dkedpfx Aloxfwfxj Aju I have 2 machines for sale with this configuration.

Condition: refurbished (used), Year of construction: 1961, We are selling an operating Casing in Line from the Berlin location. This consists of a casing-in machine built in 1961 and a pressing unit built in 1973. An extensive modernisation took place in 2021/2022. The drive of the machine and the safety equipment were renewed. The machine can be inspected at any time. Speed 500-800 pcs/h depending on personnel. Dsdpsn Nv Sdefx Al Aoku

Condition: ready for operation (used), 3 units of high-dump buckets and 1 unit of a standard bucket for wheel loaders with a Volvo quick-change system! Bucket 1: 3.3 meters wide Selling price: €7,700 net Bucket 2: 3.3 meters wide Selling price: €7,700 net Dksdpfx Asz Iq Rdjl Asu Bucket 3: 3 meters wide Selling price: €5,500 net Bucket 4: 2.8 meters wide (standard bucket - not a high-dump bucket) Selling price: €3,500 net Affordable delivery options are also available!

Condition: used, Year of construction: 2018, Channel baling press Avermann AVOS 1810 BRK-90/100, year of manufacture 2018, with cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of feed hopper: 1,800 x 1,000 mm Throughput at 35 kg/m³: 15.0 t/h Throughput at 60 kg/m³: 20.0 t/h Throughput at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, material-dependent Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. Dkodez H I Dxepfx Al Aju The sale is made against prepayment, ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), functionality: fully functional, Year of construction: 2010, We offer a variety of excavator buckets and trenching buckets with the VERACHTERT CW30 CW40 quick-change system (56cm between the "hooks"). Dkjdpfx Ajzuybbsl Aou Suitable for excavators from 20 tons upwards. All buckets are in good condition. 1x Mass excavation bucket with teeth, 145cm cutting width, 6 teeth CAT system, approx. 1.5 cbm 1x Foundation bucket, 100cm cutting width, 150cm digging depth, smooth cutting edge, approx. 1 cbm 1x Trenching bucket, humus bucket with hydraulic swivel motor! 210cm cutting width, top-quality product from "Rädlinger". (The rock bucket with the 3 teeth shown in the picture has already been sold). Total price for all 3 buckets together, net: €12,500. Collection in 96231 Bad Staffelstein / Upper Franconia / Northern Bavaria. Delivery can be arranged, subject to reimbursement of costs. If you have any questions or require further information, please send us a message or call us. We also have a Verachtert sorting grapple and a power tilt with a HYDRAULIC Verachtert quick coupler for sale; take a look at our other offers!

Condition: good (used), Year of construction: 1996, Equipment: cabin, CASE IH5130 tractor no. 51304RMJJF1053878 1996 Djdpfxovw Sn Ae Al Aoku 105KM

Condition: like new (used), Cutting edge: 120 cm, with 4 teeth Teeth-adapter for a 30-ton excavator (1219RC) Dsdpoz Ihiwsfx Al Aeku

Condition: excellent (used), Year of construction: 2017, Ref:11159 . 2017 GP2 Technologies SC3-31 Autocase Fully integrated automatic case making system designed for hardcover and rigid case production with minimal manual input. Process: The operator places the cover material onto the G‑2 gluer, which automatically feeds it and applies adhesive, then positions the boards and spine onto the glued cover. The SC‑3 system then takes over, automatically feeding the case inward, trimming corners, wrapping and folding each side, and pressing the boards to the case material. All functions are controlled via a touchscreen interface, providing intuitive setup and consistent results. Features: Djdez H Rgvspfx Al Aoku Fully automatic case making with minimal operator intervention. G‑2 Gluer with Automatic Viscosity Control for consistent adhesive application. Automated corner trimming and side wrapping for clean finished cases. Integrated pressing system for accurate board bonding. Tablet touchscreen for centralized control and streamlined operation. Reliable, repeatable case alignment and finish quality. Specification: Case Size Range: Height: 168.1–406.4 mm Width: 218.9–660.4 mm (up to 711.2 mm without corner trimmer option) Board Thickness: 1.52–3.18 mm (padded board up to ≈6.35 mm) Spine Width: 6.35–82.55 mm Operating Speed: Up to 300 cycles per hour.

Condition: excellent (used), Year of construction: 2017, Ref:11156 . 2017 Schmedt Präleg XL Casing-in Pressing Machine For casing-in a variety of thin to thick books into flexible or hard cases. Special features: • Programme selection via touch-screen monitor • Very short set-up and strip down times Dedsz Hbuqjpfx Al Aeku • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230 V + compressed air.

Condition: ready for operation (used), Everything you need for an efficient packaging line! The packaging line consists of: Dedpjz Hirqjfx Al Asku 1) Case erector 2) Case sealer 3) Conveyor belt We have used it in our warehouse to pack orders. We purchased the machine from a factory where it was part of a similar line. It works exactly as it should. Contact us today.

Condition: used, Year of construction: 2000, A machine for packaging containers such as bottles (beer, wine, beverages, oils) or cans into cardboard collective packaging. The containers are grouped and then wrapped with a cardboard blank and glued together to form a collective package. Manufacturer: SOTEMAPACK Model: WRAP-AROUND Year of manufacture: 2000 Capacity: up to 720 packages/hour (12 packages/minute) Control system: S7-300 Original technical documentation included. Dodpfx Aoywclwsl Aoku Technical condition: used machine, in working order at the time of disconnection, condition as shown in the pictures.

Condition: good (used), Year of construction: 2011, operating hours: 23,130 h, functionality: fully functional, Baling press Macpresse MAC 105, pressing force 70 t, year of manufacture 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of manufacture: 2011 Operating hours: 23,130 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Feed opening: 1500 x 750 mm Dkjdpfx Aez I Ra Eel Aeu Press chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Tying: 5-fold horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Hopper Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, prior sale is reserved, and it can be revoked at any time. Inspections are possible by arrangement. The sale is made with advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Pre-compression force 28 t Main compression force 85 t Infeed chute 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume output: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (L x W x H) Weight approx. 27,000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It was dismantled from ongoing operation. The horizontal tying is currently not functioning. The technical documentation is available. The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Oil filter changed Vertical tying system overhauled and made operational. Dodpsz H I E Aofx Al Aoku Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made with advance payment, ex works, without warranty. Our payment terms are 100% advance payment.

Condition: good (used), Year of construction: 2013, functionality: fully functional, working width: 330 mm, passage height: 120 mm, total length: 5,000 mm, Equipment: documentation/manual, Infrared drying tunnel for profiled wood Manufacturer: Makor Type: FTC-IRE Year of manufacture: 2013 The Makor FTC I.R.E. paint drying system is designed for the accelerated curing of paints and surface coatings using electric heating elements, which are applied to frame timber, moldings, profiled wood, and generally all types of wood profiles. Djdpfx Alozhap Eo Aeku It can also be used for preheating the profiles before the painting process to improve the paint quality. Passage width approx. 330 mm Passage height approx. 120 mm Infrared heating elements from above and below Includes outlet conveyor belt, manufacturer: Makor Length 4000 mm, conveyor belt width 250 mm Connected load approx. 55 kW Dimensions: Drying tunnel approx. 5000 x 1400 x 1750 mm (L x W x H) Operator terminal approx. 1200 x 500 x 1100 mm (L x W x H) Conveyor belt approx. 4000 x 600 mm (L x W) Total weight approx. 2200 kg Includes documentation, wiring diagram, and operating manual.

Condition: good (used), The Orion L1000 is the ideal display case for presenting your creations in the best possible style and with the most innovative design. Its four glass sides and LED lighting, with their elegant shapes, ensure maximum presentation in terms of quality and aesthetics. Base: The structure consists of metal tubes, epoxy powder coating, with aluminum die-cast connections, and adjustable feet for perfect positioning. Basic version/raw furniture: Without front panel, front grille, and side panel. Technical features: LED lighting (LEDs on vertical struts, customer-supplied) Electronic control with digital display Automatic defrosting Dkodpfxjwkh Uqs Al Aju Forced-air cooling with positive temperature Central cooling for connection to an external refrigeration system 4 glass sides and 3 shelves Glass structure made of double safety glass Temperature: +4°/+6°C Refrigeration capacity: 1021 W Electrical characteristics: Power supply: 230 V/1 phase/50 Hz Power: 1.5 kW Dimensions and weight: H x W x D: 1560 x 1000 x 830 mm 280 kg New price: 5000 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Display case for counters The Orion L1000 is the ideal display case for presenting your creations in the best style and with the most innovative design. Its 4 glass sides and LED lighting, combined with its elegant shapes, ensure maximum presentation in terms of quality and beauty. Base: The structure consists of metal tubes, epoxy powder coating, with aluminum die-cast connections, and adjustable feet for perfect positioning. Technical features: LED lighting Electronic control with digital display Dodpfevtl Afjx Al Aeku Automatic defrost Static cooling Centrally cooled for connection to an external refrigeration unit 4 glass sides and 3 shelves Glass structure made of double safety glass Temperature: -20°/+2° Electrical properties: Power supply: 230 V/1 phase/50 Hz Power: 1.5 kW Dimensions and weight: L125xW83xH160 cm 280 kg New price: 5000 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Dsdpfx Aezm Eqxjl Asku Bucket / Light Material Bucket / Dieci attachment / in stock & immediately available Price: €1,990.00 net / €2,368.10 gross - Weight (kg): 491 - Width (mm): 2,400 You can find the exact dimensions of the attachment below the images. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (phone number available upon request) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale excepted! Internal No.: 010101 = Further information = Intended use: Construction Unladen weight: 491 kg Please contact Marius Herden for further information.