Used Bosch Kpz Cylinder D25 H15 M6 for sale (10,060)

Condition: new, Bosch VM 60-T supply module 1070077371-105 SN:002157251, unused, 100% functional, delivery as per photos Bodpfsx Eq Aysx Acnell

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks. Bjdpfx Acozv Niqsnoll

Year of construction: 1979, operating hours: 500 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 123, We are selling a Bosch Höller 3 edge-sealing machine that underwent a general overhaul in 2022. The machine has been fully converted to servo drive and fitted with an S7 control system. Coloured or clear film is fed via a roller, folded into a bag measuring 11 cm wide by 15 cm high, and sealed. The grippers can be individually adjusted within the frame as required. Product feeding is via a screw feeder, which also operates fully electrically with all standard parameters. The machine is fully operational. Depending on the product to be filled, speeds of 40–60 bags per minute can be achieved. Bedpfxsizag Te Acnjll

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning. Bsdpjzp Rmqofx Acnjll

Condition: used, functionality: unexamined, Bosch turbo SCARA SR8 - without control cabinet - small crack in the housing, see photo Bjdezl T U Njpfx Acnoll - shipping possible for an additional charge

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. Bedezvgk Eopfx Acnoll The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. Bodjq Nd Rbepfx Acnjll 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Bedpfxeztrbwj Acnsll

Condition: ready for operation (used), Year of construction: 2007, A vertical high-performance flow wrapping machine Robert Bosch is available. Format range: 360mm, packaging capacity: 80bags/min. An on-site inspection is possible. Expected to be available June 2026. Blodpeyxratefx Acnsl

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. Blsdpfx Aoztz D Ujcnjl The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: excellent (used), Year of construction: 2017, 1 used steam boiler Manufacturer: Bosch Type: U-MB 2020 Capacity: 2,000 kg/h Permissible operating pressure: 13.0 bar Increased test pressure: 24.1 bar Maximum temperature: 195°C Total volume: 2,065 l Year of manufacture: 01/2017 CE marking: CE 0036 Equipped with a Weishaupt gas burner, type WM-G20/3-A, 300-2,000 kW, ZM-LN design, 15-500 mbar, gas control system, separate control cabinet, Loos Boiler Control LBC boiler control system, feed water pump, Eco Type 1, capacity 89 kW, volume 41 liters, temperature 238°C, permissible operating pressure 31 bar, test overpressure 56 bar, and the existing coarse and fine fittings. Bljdpfx Acozltalsnsl

Condition: not inspected (used), Bosch Rexroth Type: SCARA SR6, control panel defective Bosch Rexroth articulated-arm robot, turbo SCARA SR6 with control unit Rated load: 2 kg Maximum load (sleeve diameter 20 mm): 5 kg Maximum load (sleeve diameter 25 mm): 8 kg Rated maximum moment of inertia (axis 4): 500 kgcm² Maximum moment of inertia (axis 4): 1000 kgcm² Horizontal force, continuous/maximum: 60/150 N Vertical force, continuous/maximum: 200/300 N Torque (axis 4), rated/maximum: 5/10 Nm Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone. Bljdpfozh U R Rox Acnsl

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Bosch, pneumatic cylinder type -Stroke: 80 mm -Piston diameter: 50 mm -Piston rod: Ø 20 mm / M16 x 1,5 -Dimensions: 260/65/H90 mm Bodpfx Aog Twkmscnsll -Weight: 1.6 kg

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter Bsdpfx Acjztn Iysnoll A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Year of construction: 1996, condition: ready for operation (used), A Bosch candy forming machine is offered. Max. rope speed: approx. 125m/min, min./max. output: approx. 1000/4000candies/min, hourly output range: approx. 400kg/h-1200kg/h, rope diameter range: approx. 15mm/49mm, max. filling percentage: approx. 32%, control system: Siemens SIMATIC S5-95U. Weight: approx. 2400kg. Machine dimensions X/Y/Z: approx. 3900mm/1650mm/1750mm. Documentation available. An on-site inspection is possible. Bljdezpyytspfx Acnol

Condition: used, Output module, control card, output card, controller -Manufacturer: Bosch -Type: 047832-304401 -Type: 047832-303303 -Number: 1x control cards available -Price: per piece -Dimensions: 140/160/H15 mm -Weight: 0.14 kg Bjdpfxocc Huie Acnell

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Manufacturer: Bosch, pneumatic cylinder short-stroke cylinder type Bledeg I D Nkepfx Acnjl -Stroke: 100 mm -Piston diameter: 63 mm -Piston rod: Ø 16 mm / M8 -Quantity: 8 pieces -Price per piece -Dimensions: 160/80 / H105 mm -Weight: 1.8kg / piece

Condition: excellent (used), Here we offer a Bosch SCARA articulated-arm robot, model SR8, with a control unit. Bosch SCARA articulated-arm robot, model SR8 Control unit Type: SCARA SR8 Bsdpfx Acezdir Njnell Condition: used Scope of supply: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Blsdjwzyg Hspfx Acnsl

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Bljdpfsxl Aauex Acnjl

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, punching force: 28 t, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 6 mm, punching diameter: 76 mm, overall weight: 16,000 kg, throat depth: 1,500 mm, Equipment: safety light barrier, Boschert Multipunch 1500 8-station tool changer incl. 4-station and 8-station multi-tool base bodies (with current tooling consisting of 18 punching tools) Punching force: 280 kN (28 tons) Travel ranges: x – 30500 mm (repositioning up to 9999 mm) y – 1580 mm Punch arm overhang: 1850 mm Tooling system: Trumpf Gr2 (76mm) as well as Boschert Revotool Labod 32065 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) Max. installation height: 90 mm, stroke length 30 mm upwards and downwards, steplessly programmable. Table width, left + right: 3250 mm each Table depth: 3250 mm Table height: 900 mm Overall width: 6860 mm Overall depth: 5040 mm Overall height: 2080 mm Drive power: 25 kVA Machine weight: 16,000 kg Hydraulic oil capacity: 160 l Color: Blue RAL5017 / Light gray RAL7035 Machine year of manufacture: 2011 Ball roller table Punching slug extraction Fast hydraulics (400/800 strokes) Bledpfxjzw Dz Do Acnel very well-maintained condition new screen with accessories

Condition: used, BOSCH Bodpfoy Tby Sox Acnsll Controller card

Condition: excellent (used), BOSCH Bsdpfx Acey S Dv Hsnsll Controller card

Condition: used, BOSCH controller card Bljdpfx Acoy Tbzponjl

Condition: excellent (used), Year of construction: 2021, Manufacturer: Bosch Type: UT-L 1 Quantity: 2 pieces Year of manufacture: 2021 Volume: 625 l Bedpfxovw U R Hs Acnjll Power: 650 kW Burner: Dreizler Marathon M 601 ARZ Includes: Gas control system