Used Blohm Hanseat 75 for sale (6,380)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Nwodjvf E Avopfx Afajf Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 885 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, rotary table diameter: 750 mm, spindle speed (max.): 18,000 rpm, spindle nose: HSK63, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, Machine Description: 5-axis machining center with extensive equipment and linear drives on all axes. Well-maintained and fully operational. Current run times: Program ON: 27,011 h / Machine ON: 57,198 h / Spindle ON: 24,324 h Travel Paths and Speeds: X-axis (longitudinal): 885 mm Y-axis (cross): 600 mm Z-axis (vertical): 600 mm Feed rate on all axes: 90,000 mm/min Clamping Table / NC Rotary Table: NC rotary table diameter: 750 mm Table load capacity: 800 kg Control: Heidenhain iTNC530 with electronic handwheel Spindle and B-Axis: Speed range: 50 – 18,000 rpm Tool holder: HSK63 Spindle power: 35 kW (S1) Torque: 80 Nm (S4) NC-controlled B-axis: +110° / -10° Coolant System and Chip Disposal: External coolant with nozzles: 4 bar Internal coolant: 40 bar Nwodpfx Afey Hix Neasf External air: yes Internal air: yes Paper band filter: yes Chip conveyor: yes Automatic Tool Changer: Tool holder: HSK63 Number of positions: 60 Machine Weight: Weight: approx. 10,900 kg Additional Equipment and Accessories: Heidenhain direct measuring system with air purge on all axes iR probe by M&H Tool measurement with Blum laser Chip flushing gun Work area rinse system Machine documentation

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request Nwjdpfxsy Dp Ncs Afajf

Condition: excellent (used), Year of construction: 2023, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts special price on request Equipment : - High quality construction - Drive roller is crowned - This means that the sanding belt is automatically centered on the roller - Fully vulcanized contact roller for maximum service life and smooth running - Tool-free and therefore quick, uncomplicated change of the sanding belt - Stepless height adjustment - for optimum adjustment of the belt sander to the user - Freely adjustable metal fence - for optimum and safe guidance of workpieces when Nodpjy Erxvefx Afaewf Use of the large surface sanding area - Belt speed optimized by design - to prevent the workpiece from burning during processing can be excluded as far as possible - Suction unit equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector incl. phase inverter - Motor brake - Incl. sanding belt grain 60 - Dust bag

Condition: used, mileage: 287,502 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2019, emission class: euro6, color: white, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, fog lights, immobilizer system, power assisted steering, traction control, = Additional options and accessories = Nwsdpfx Afsy Hvw Esaef - Autoradio - Climate control - EBS - Electrically operated mirrors - Hydraulic power steering - Sun visor = More information = Engine capacity: 2.143 cc Dimensions (LxBxH): 848 x 296 x 208 cm Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 50%

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, overall weight: 25 kg, tank capacity: 75 l, warranty duration: 12 months, KARCHER NT 75/1 Me Ec H Z22 INDUSTRIAL VACUUM CLEANER 2018 MANUFACTURED NEW ORIGINAL ACCESSORIES - SAFETY FILTER BAG, SUCTION TUBE, SUCTION HOSE, ELBOW, AND CREVECT + FLAT NOZZLE Industrial vacuum cleaner designed for collecting dry and wet dirt. It is also suitable for removing combustible dust and other Class H dust in areas with explosion hazards designated as Zone 22. A powerful brushless motor ensures long service life. The vacuum cleaner is fully grounded, and the appropriate accessories are electrically conductive to prevent discharge. The device has been thoroughly overhauled and is ready for operation. Thanks to the 75-liter stainless steel tank and the sturdy chassis with an adjustable transport handle, you can easily remove large amounts of dust, coarse dirt, or liquids from the work area. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, to which we cordially invite you. Nwodpfx Afoy Humxeaef TECHNICAL DATE: Power supply parameters (V/Hz): 220 - 240 / 50 - 60 Air flow rate (l/s): 61 Vacuum (mbar/kPa): 220 / 22 Tank capacity (l): 75 Rated power (W): max. 1000 Nominal diameter ( ): ID 40 Power cord length (m): 10 Cable material: Rubber Sound pressure level (dB(A)): 76 Colour: Silver Weight without accessories (kg): 25.1 Dimensions (L x W x H) (mm): 695 x 540 x 1012 ORIGINAL EQUIPMENT: Safe Filter bag: 1pc. DN 40 suction hose - 4 m DN40 suction pipe - 1 m DN40 elbow Crevice nozzle Flat nozzle

Condition: used, Year of construction: 2021, gebraucht 2021 9502 Türkei 2100 € 1 1050 mm 2 mm 75 mm 1930 mm 700 mm Njdpfx Afswiquqoaswf 1160 mm 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: used, Batch offer consisting of 208 used plastic Euronorm stacking bins measuring 400 x 300 mm and with a capacity of 6 liters. Specially designed for hygienic and efficient storage within the food industry. The storage container is made of food-grade polypropylene (PP), a strong and durable material that meets the highest hygiene Nwodpfx Ajx Ahp Ajfajf

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm Nsdpjya Eldsfx Afaowf • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Year of construction: 1979, condition: reconditioned (used), Machinetype: wire nail press Make: WAFIOS Type: N75 Nwodsh Hnqtspfx Afasf Constr. year: 1979 diameter range: 2,0-3,8 mm nail length: 20-80 mm output – pieces/min: 440

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 05/2027, year of last overhaul: 2026, input frequency: 50 Hz, empty load weight: 540 kg, overall weight: 540 kg, type of input current: three-phase, power: 11 kW (14.96 HP), electrical fuse: 32 A, Spiral Mixer Kemper Model: SP 75 Proven technology ... time-tested and reliable! Dough mixer with manual control Nwjdpfxov D Tkfs Afajf 2 speeds, 2 timers Robust engineering Stainless steel bowl and spiral Dimensions: 800 x 1150 x 1280/1700 mm (W x D x H) Connection: 400V, 32A CEE plug Used machine, cleaned With warranty + spare parts service Options: Delivery service Maintenance contract Service package Spare parts box Instruction & commissioning Leasing & rental service Visit our large spiral mixer exhibition!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 05/2027, year of last overhaul: 2022, total length: 1,150 mm, total width: 800 mm, total height: 1,370 mm, input frequency: 50 Hz, empty load weight: 540 kg, overall weight: 540 kg, type of input current: three-phase, electrical fuse: 32 A, Kemper SPL 75 Spiral Mixer Nedpfx Afoyhzmwsaewf Proven kneading machine for your doughs! 2 timers Spiral mixer with 2 speeds Stainless steel bowl and spiral Connection: 400 V Robust mechanics! Used machine Quality from a specialist workshop! Benefit from over 35 years of experience! Options: Maintenance contract Spare parts box for increased safety! Delivery service Training & commissioning Visit our large showroom!

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4600 € 1050 mm 2 mm Nwodpfx Aoy Dvlkjfajf 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Nsdpfx Afoy E I Nqsaewf Hydraulic double-column straightening press Dunkes Type HDSR 75 Year of manufacture: 1977 Pressing force: 165 t 3 cylinders, pressing force per cylinder: 75 / 65 / 25 t Table: 1500 x 500 mm Stroke: 350 mm Drive power: 3 / 15 kW Weight: 6 t Price: EUR 2,750— plus VAT, ex location

Condition: excellent (used), functionality: fully functional, mileage: 312,000 km, power: 160 kW (217.54 HP), first registration: 10/2016, fuel type: diesel, maximum load weight: 2,300 kg, overall weight: 7,490 kg, axle configuration: 2 axles, wheelbase: 4,185 mm, gearing type: mechanical, loading space length: 6,100 mm, loading space width: 2,550 mm, loading space height: 2,400 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, compressor, cruise control, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, seat heater, soot filter, spoiler, tail-lift, traction control, truck registration, Vehicle in excellent condition, always well maintained. Features air conditioning and a reversing camera, side door on the van, tail lift. Front tyres are almost new, rear tyres in very good condition. Nodpfx Asxugp Ssfaswf

Condition: used, mileage: 310,000 km, power: 188 kW (255.61 HP), first registration: 11/2004, fuel type: diesel, tire size: 315/80R 22.5, axle configuration: 6x2, wheelbase: 5,200 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2004, Equipment: ABS, EBS, air conditioning, central locking, crane, power assisted steering, traction control, = Additional options and accessories = - Reversing camera - Cabin - Central lubrication system - Hydraulic grab arm - Catalytic converter - Air suspension - PTO - PTO - Radio/CD player - Disc brakes - Sun visor = Special features = 0E643868 - HVW1144 Equipped with AE crane weighing system = More information = General information Application areas: Cleaning and recycling Registration number: hvk114 Transmission Transmission: ALLISON, Automatic Axle configuration Tyre size: 315/80R 22.5 Front axle: Max axle load: 7500 kg; Steered Rear axle 1: Max axle load: 11500 kg Nwsdsyk Uxuopfx Afaef Rear axle 2: Max axle load: 7500 kg; Steered Functional Lifting capacity: 19,000 kg Crane: HIAB 195 190 W 3, behind the cab Body make: GEESINK GPM III/1625

Condition: good (used), Drill bits, twist drills, drill bits -Manufacturer: Gühring / Unisto / Hartner, Spiral drill bits, 11 pieces, Ø 51 - 75 mm -Type: Double cutter, MK5 chucks Nsdpfx Afjy A Ihneaewf -Size/Quantity: see photo parts list -Price/Fee: complete -on request: various sizes/quantities available from further stock -Transport dimensions: 650/430/H75 mm -Weight: 44 kg

Condition: excellent (used), functionality: fully functional, mileage: 74,000 km, power: 118 kW (160.44 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 5,100 kg, maximum load weight: 2,400 kg, overall weight: 7,500 kg, axle configuration: 2 axles, wheelbase: 4,185 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,350 mm, Year of construction: 2017, operation weight: 5,100 kg, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, soot filter, tail-lift, ADDRESS: Straße 9, no.33-35, 12309 Berlin-Lichtenreade (see last image) Original mileage! Air conditioning Nodpfx Afjx Dxuxjajwf Differential lock Cruise control Lane keep assist 1t tail lift Electric windows Electrically adjustable, heated exterior mirrors 3-seater, double passenger bench Minimum 24-month rental within in-house transport, regional only! Trade-in possible Delivery possible

Condition: excellent (used), functionality: fully functional, mileage: 74,395 km, power: 118 kW (160.44 HP), first registration: 09/2017, fuel type: diesel, overall weight: 7,500 kg, axle configuration: 2 axles, wheelbase: 4,185 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,350 mm, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, soot filter, tail-lift, ADDRESS: Straße 9, nr.33-35, 12309 Berlin-Lichtenreade (see last picture) Original mileage! Air conditioning Differential lock Cruise control Lane keeping assistant 1 ton tail lift Electric windows Nedpfox Dtp Dox Afaowf Electrically adjustable and heated exterior mirrors 3 seats, double passenger bench Minimum 24-month rental for regional internal transport possible! Trade-in possible Delivery possible

Condition: good (used), End mill, end mill, cutter, shell cutter -Manufacturer: Reishauer, end mill with longitudinal groove, 2 pieces -Type: 75 x 75H Sp 5000 KHSS-E 75x75x27 -Hole: Ø 27 mm -Cutting material: HSS-E Nwsdpfx Aoy A Embsfajf -Price/Fee: complete -Transport dimensions: 150/75/H75 mm -Weight: 2.9 kg

Condition: good (used), End mill, end mill, cutter, shell cutter -Manufacturer: Fette, end mill with longitudinal groove, 2 pieces -Type: Fette 75 x 75H Sp 880 HSS Nedpjy A Ehfefx Afaowf -Hole: Ø 27 mm -Cutting material: HSS -Price/Fee: complete -Transport dimensions: 155/75/H75 mm -Weight: 3.3 kg

Condition: used, mileage: 389,954 km, power: 235 kW (319.51 HP), first registration: 01/2002, fuel type: diesel, tire size: 13r22.5, axle configuration: 6x4, wheelbase: 3,800 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, emission class: euro3, suspension: steel, total length: 7,550 mm, total width: 2,550 mm, total height: 3,200 mm, Year of construction: 2002, Equipment: electric window regulation, power mirror, = More options and equipment = - Aluminium fuel tank - Sun visor - Toolbox = Further information = Nwjdpjy Emrqefx Afasf Axle configuration Tyre size: 13R22.5 Brakes: Drum brakes Suspension: Leaf suspension Front axle: Steered; left tyre tread: 3 mm; right tyre tread: 3 mm Rear axle 1: Twin tyres; left inner tread: 2 mm; left outer tread: 2 mm; right inner tread: 2 mm; right outer tread: 2 mm; reduction: hub reduction axles Rear axle 2: Twin tyres; left inner tread: 2 mm; left outer tread: 2 mm; right inner tread: 2 mm; right outer tread: 2 mm; reduction: hub reduction axles Weights Unladen weight: 11,900 kg Payload: 14,100 kg Gross vehicle weight: 26,000 kg Condition Damage: none

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Njdpfsy At Hcox Afaswf

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Demonstration line, Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Njdpoi Dtb Asfx Afaewf Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. Nwedoiyyndjpfx Afajf additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome