Used Avermann Screw Press for sale (16,189)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure Isdozu Aibspfx Ahbetn - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: VD058412, overall weight: 4,000 kg, total length: 2,775 mm, total width: 1,805 mm, total height: 1,926 mm, power: 110 kW (149.56 HP), fuel type: electric, volume flow: 23,890 m³/h, operating pressure: 8 bar, pressure (min.): 5.5 bar, pressure (max.): 7.5 bar, ambient temperature (max.): 45 °C, noise level: 74 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, type plate available, Rotary screw air compressor: oil-injected, two-stage, direct-coupled, fixed/variable speed. Itedpjz Ndtbsfx Ahbon

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Iodpfx Ahoyy U Shjbstn Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, ATLAS COPCO XAHS237+ portable compressor with an aftercooler, fully serviced Technical specifications: capacity: 14.20 m3/min; operating pressure: 12 bar; year of manufacture: 2012; DEUTZ 6.1 engine; Itedpfsz Rxhkjx Ahben operating hours: 2056 h. The compressor is in perfect working order and ready for operation, with a warranty. Net price: 119,500 PLN Gross price: 146,985 PLN The machine is in excellent condition. Links to videos are provided below.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO XAHS447 STAGE3 mobile compressor with final cooler, fully serviced. Technical data: capacity: 26.6 m3/min; operating pressure: 12 bar; year of manufacture: 2015; engine: CAT C9.3 ACERT 242KW; operating hours: 4431h; The compressor is in perfect working order, ready for operation, with a warranty. Net price: 187,000 PLN Gross price: 230,010 PLN The machine is in excellent condition. Links to videos are provided below. Itedpfxoz Rxu Rj Ahbsn

Condition: new, Screw compressor AIRCRAFT ACS DUO 3.5-10 2x100 KK - Exhibition model - ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery rate approx.: 380 liters, Maximum pressure: 10 bar, Itodju R S A Djpfx Ahbon Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (L x W x H): 1,200 x 900 x 1,250 mm, Weight: 201 kg - New exhibition model -

Condition: excellent (used), PROD. WORTHINGTON TYPE RLR40CE S/N ITJ354660 YEAR 2020 POWER (kW) 30 CAPACITY (m3/min) 4.7 DISCHARGE PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 8011 INVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air Iedpjz Nhf Nefx Ahbstn ON TANK no DOCUMENTS no CONNECTION NEW/USED USED

Condition: used, BOGE Screw compressor / industrial compressor BOGE C 9 Screw compressor – 7.5 kW – 10 bar – 1,060 m³/min For sale is a used screw compressor from the manufacturer BOGE, including the ELMED HELIO-STROB BETA A2 stroboscope measuring system. The compressor is suitable for supplying compressed air to machines, workshops, production facilities, and for general industrial compressed air applications. Technical data: Manufacturer: BOGE Type: C 9 Device type: Screw compressor Year of manufacture: 2017 Volume flow rate: 1,060 m³/min Compression end pressure: 10 bar Motor power: 7.5 kW Motor speed: 3000 min⁻¹ Control: BOGE base control Digital operating and display panel ELMED HELIO-STROB BETA A2: Manufacturer: ELMED Messtechnik Series: HELIO-STROB Type: BETA A2 Mains connection: 115 / 230 V AC Mains frequency: 50–60 Hz Max. power consumption: 80 VA Equipment: BOGE base control control unit Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking ELMED HELIO-STROB BETA A2 control unit ELMED stroboscope hand lamp Connection cable Operating manual HELIO-STROB Accessories as shown in the pictures Application areas: Industrial compressed air supply Production facilities Workshops Machine supply Manufacturing companies General compressed air applications Isdpfxezxpi Ns Ahbetn Scope of supply: 1 × BOGE C 9 screw compressor 1 × ELMED HELIO-STROB BETA A2 control unit 1 × ELMED stroboscope hand lamp 1 × Connection cable 1 × Operating manual HELIO-STROB Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures BOGE operating display shown in the switched-on state ELMED HELIO-STROB shown in the switched-on state Type plates are present Dimensions: BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm ELMED HELIO-STROB BETA A2 control unit: approx. 280 × 240 × 80 mm ELMED hand lamp: approx. 182.5 × 117 × 117 mm Transport data: Weight BOGE C 9: approx. 215 kg Weight ELMED control unit: approx. 2.3 kg Weight ELMED hand lamp: approx. 1.5 kg Total weight of devices: approx. 219 kg plus cable and operating manual The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Itedpfx Ajvmivcohbjn Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: used, Year of construction: 1992, machine/vehicle number: 77K2, KSP11 SACMA double-pressure press, without thread roller, used, very good condition Itjdpfx Ajwiwqfshbjn

Condition: excellent (used), Screw Compressor Brand: Alup Model: SCK 15-8 Year: 2008 Free Air Delivery: 1.7 m3/min Pressure: 8 bar Motor Power: 11 kW - 380 Volt Load Hours: 14,242 Operating Hours: 42,034 Length: 1,530 mm Width: 620 mm Iedpfx Asxcybdehbjtn Height: 900 mm Weight with pallet: 230 kg

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering a used screw compressor for sale. KAESER screw compressor - SK22 Serial No.: 1558 Year of manufacture: 2016 Rated power: 11.0 kW Motor speed: 2,960 rpm Max. operating pressure: 8.0 bar Ambient temperature: 3 - 45°C Integrated or separate dryer Oil separator Control panel All available attachments Operating hours under load: Unit 1: approx. 2,500 hours Unit 2: approx. 1,000 hours Compressed air tank: 2,000 liters Tank design: hot-dip galvanized Price: €14,500.00 net €17,255.00 gross This is a used item. DESIGN Our sales team will gladly prepare a non-binding offer tailored to your requirements. Itedpoz Iy Nisfx Ahbjn TRANSPORT & INSTALLATION We will be happy to assist you with the transport and installation of the equipment. TERMS OF PAYMENT Terms of payment will be agreed upon in the event of an order. The price is quoted as a unit price/net price, or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveying technology, storage platforms, textile storage, and machines for retail, industry, and trades. We continuously offer interesting used items from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2008, operating hours: 1,408 h, machine/vehicle number: 89-4010241, USED AIRMAN 830CFM,150PSI AIR COMPRESSOR MODEL : PDSF830S Itjdpfx Ahsyrb Hnobsn SERIAL :89-4010241 YEAR : 2008 HOUR : 1408 AS SHOWN

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: refrigerant dryer, Renner screw compressor RS-Top 7.5, including refrigerant dryer and compressed air tank We are offering a used Renner screw compressor RS-Top 7.5 for sale, including a refrigerant dryer, automatic condensate drain, and compressed air tank. Screw compressor Manufacturer: Renner Type: RS-Top 7.5 Delivery rate: 1,060 l/min Year of manufacture: 2014 Operating hours: 15,256 h Refrigerant dryer Iedpjz Irpnefx Ahbstn Manufacturer: Hankison Type: HHD101 Year of manufacture: 2022 Additional components: Beko automatic condensate drain Schneider compressed air tank, 270 liters If you are interested or have any questions, or if you require further technical information, please do not hesitate to contact us.

Condition: new, performance: 984 l/min main engine power: 7.5 kW tank capacity: 500 l maximum operating pressure: 10.0 atm integrated refrigerant dryer electronic adjustment of compressor operating parameters soundproofed cabin (only 67 dB) Ijdpfx Ahszx Sr Hjbetn complies with CE standards manufactured in 2025, NEW

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DIESEL ATLAS COPCO XAS 88 compressor with an aftercooler (dryer), fully serviced. Compressor complete with documentation for registration in Poland. Technical data: flow rate: 5.20 m3/min; operating pressure: 7 Bar; year of manufacture: 2019; weight: 750 kg; Itsdjz Rxczjpfx Ahbon engine: KUBOTA; compressor in fully working condition. net price: PLN 57,500 gross price: PLN 70,725 Below is a link to a video showing the machine in operation.

Condition: new, Screw compressor AGRE Model Sonetteo 7.5+ 10 Compact screw compressor unit including refrigerant dryer and compressed air tank, 270 liters. Belt-driven. Space-saving. Economical. Easy operation thanks to the Infologic² Basic control system. Efficient compression stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Detailed features: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control system: Infologic² Basic control unit Refrigerant dryer: Installed, refrigerant R513A Tank: 270 liters, horizontal, painted, 11 bar Motor power: 5.5 kW Pressure: 10 bar Delivery rate: 780 liters/min Itedpfxohun Tzj Ahbon Including time-controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: used, Year of construction: 2001, operating hours: 90,000 h, overall weight: 7,000 kg, power: 355 kW (482.67 HP), operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Good working oil-free compressor, also suitable for spare parts (motor, airend, coolers) Isdpfexbdppjx Ahbjtn

Condition: used, Screw compressor RefComp -Type: 134-S-160-LZ Itedpoz E Nmxefx Ahben -Volume: 640 m3/h -Cooling capacity for R134a: 298 kW at -5°C/40°C, 365 kW at 0°C/40°C -Items in magazine: 3 -Reference number: S259 -Condition: Used in very good condition, ready to work

Condition: excellent (used), Year of construction: 2008, PROD. MAUGUIERE TYPE MAV400 S/N CAI027542 YEAR 2001 Itjdpfsz Eap Djx Ahbsn POWER (kW) 30 OUTPUT (m3/min) PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 60238 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) no ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: used, Year of construction: 2019, power: 30 kW (40.79 HP), volume flow: 4.95 m³/h, pressure (max.): 12.75 bar, Atlas Copco AQ30VSD FF Air Compressor Manufacturer: Atlas Copco Model: AQ30VSD FF Year of manufacture: 2019 Country of origin: Belgium Maximum pressure: 12.75 bar Power: 30 kW Free air delivery: 4.95 m³/min Air flow rate: 82.5 l/s, 174.8 cfm, 4.95 m³/min Motor power: 40 HP Motor speed: 8,600 rpm Weight: 702 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free Ijdpfx Ahsxk U Arobjtn ISO class: 8573-1 Class 0 Control system: Elektronikon Graphic Equipment: SMARTLINK Origin: Made in Belgium No liability is accepted for the accuracy, completeness, or timeliness of the information provided.

Condition: good (used), Year of construction: 2014, power: 14.8 kW (20.12 HP), volume flow: 1.63 m³/h, pressure (max.): 7.75 bar, Atlas Copco SF 15 FF Air Compressor Manufacturer: Atlas Copco Model: SF 15 FF Year of manufacture: 2014 Maximum pressure: 7.75 bar Free air delivery: 4.95 m³/min Iedpfx Ajxk U Dcjhbstn Air flow: 27.1 l/s, 1.63 m³/min Motor power: 14.8 kW = 20 HP Motor speed: 2,885 rpm Weight: 595 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Features: Integrated Workplace Air System™, equipped with SMARTLINK Control: Elektronikon Origin: Made in Belgium No guarantee is given for the accuracy, completeness, or currency of the information provided.

Year of construction: 2007, condition: used, Screw compressor with refrigeration dryer - Manufacturer: Boge - Model: C9 - Year of manufacture: 2007 - Max. pressure: 8 bar Iodpfx Ajz Hm Rkehbjtn - Max. air flow: 1,180 m³/min. - Motor power: 7.5 kW - Width x depth x height: 480 x 987 x 1,234 mm - Volts/Hz: 400/50 - Weight: 210 kg Refrigerated dryer - Boge Ultratroc - Type. SD 0050 AP - max. 16bar - Location: Warehouse, D-32825 Blomberg

Condition: excellent (used), Kaeser TC 44 In very good condition. Isdpfx Ahow Rcmgjbotn

Condition: excellent (used), Year of construction: 2008, PROD. KAESER TYPE BSD72 S/N 1909 YEAR 2008 POWER (kW) 37 CAPACITY (m3/min) 7 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED (AIR/WATER) air ON TANK no Itsdpez E Hb Tefx Ahbjn DOCUMENTS no