Used Asea Contactor for sale (235)

Condition: good (used), SEAL AquaSEAL SW 3300 — Liquid Laminator The AquaSEAL SW 3300 applies water-based protective coatings to wide-format digital prints, including banners, billboards, vehicle graphics and truck curtain sides. It applies, smooths and dries the coating, providing protection against water, abrasion, UV exposure and chemicals when used with suitable AquaSEAL liquid laminates. Automatic infrared curing with Accucure Feedback control. Segmented heaters for processing narrower materials. Dodpfez Ndtnox Al Aewc Roll-fed or fan-folded operation. Multiple-roll handling capability. Variable speed and touch-sensitive control panel. Non-stick coated parts for easier cleaning. Technical specification Maximum coating width: 3,300 mm Maximum processing speed: Up to 3 m/min, depending on material and Meyer bar Dimensions (W × D × H): 4,000 × 1,200 × 1,100 mm Machine weight: 816 kg Electrical requirements: 3N/PE, 208–240 V, 50/60 Hz, 26 A per phase Compressed air requirements: 90–125 psi Material feeding: Roll-fed or fan-folded Standard coating bar: Smooth bar

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 2002 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Ie Dkovfv Tfjk Ddfetk Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction Dsdpfx Alezvrf Ie Aswc The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: used, Year of construction: 1992, Used Machine Year of manufacture: 1992 Features and Technical Specifications: - Designed for small workshops, with 1 Combi unit for top-down sanding - Working width: 950 mm - Sanding belt dimensions: 970 mm wide, 1,700 mm long - 1 combined contact roller and sanding shoe unit, drive motor 7.5 kW, with contact roller rated at 85 Shore and a sanding shoe with felt pad and sliding coating - DFL veneer sanding unit - With workpiece-controlled air-cushion sanding shoe - Protected sanding shoe storage inside the machine - Sanding belt drive with automatic star-delta start-up and maintenance-free, wear-free electric braking system - Additional storage for an extra sanding tongue - Safety shut-off when the door is opened - Pneumatic sanding belt tensioning device - Belt feed mechanism, driven by a worm gear motor, feed speeds of 4 and 8 m/min, and automatic control for belt travel - LED digital display for workpiece thickness adjustment Dsdpfozy Dzcox Al Aswc - Safety shut-off at the machine inlet in case of excessive workpiece thickness - Indicator lights to show operational readiness - Optimally positioned dust extraction hood with connection (D=160 mm) for the sanding belt - Roller table at the inlet - Complete pneumatic control system, including automatic pressure switch, control and monitoring devices - All electrical switching elements—main switch, fuses, contactor control with motor protection relays, and display units—in VDE-compliant design - Total power consumption: approx. 9 kW - Operating voltage: 400 V, 50 Hz - Dimensions: approx. 1500 x 1650 x 2000 mm - Weight: approx. 1200 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. Dsdpfx Ajxvca Asl Aewc 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: new, Year of construction: 2026, SJSZ 51/105 Conical Twin-Screw Extruder Industrial Twin-Screw Extruder for PVC Processing The SJSZ 51/105 conical twin-screw extruder is designed for continuous processing of PVC materials and the production of rigid PVC profiles, pipes and other extruded products. The extruder features a bimetallic screw and barrel assembly made of nitrided 38CrMoAlA steel, providing high wear resistance and stable extrusion performance. The machine is equipped with a 22 kW three-phase asynchronous motor with forced cooling, a DELTA variable frequency drive, OMRON temperature controllers, and Schneider electrical components. The extruder includes an automatic material feeding system, vacuum degassing, air-cooled barrel heating zones, and an electrical control cabinet. 1. General Technical Specifications • Model: SJSZ 51/105 • Type: Conical twin-screw extruder • Processing Material: PVC • Production Capacity: 50–120 kg/h, depending on material and operating conditions • Main Motor Power: 22 kW • Motor Type: Three-phase asynchronous motor with forced cooling • Motor Speed Control: DELTA frequency inverter • Power Supply: 380 V, 3-phase, 50 Hz 2. Screw & Barrel • Screw Diameter: 51/105 mm • Screw Length: 1085 mm • Screw Speed: 1–34.8 rpm • Screw & Barrel Material: 38CrMoAlA, nitrided • Screw & Barrel Design: Bimetallic • Nitriding Depth: 0.4–0.7 mm • Nitriding Hardness: ≥940 HV • Surface Roughness: Ra 0.4 μm • Bimetallic Layer Hardness: HRC 55–62 3. Heating & Cooling System • Barrel Heating Power: 12 kW 4 zones • Heating Zones: 10 • Heating Elements: Cast aluminum heaters • Barrel Cooling: Forced air cooling 3 zones • Temperature Controllers: OMRON 4. Gearbox • Gear & Shaft Material: High-strength alloy steel • Gear Treatment: Carburized, quenched and ground • Gear Hardness: HRC 54–62 • Gear Precision: Grade 6 Dwodpsz Nmfbjfx Al Aec • Screw Protection: Automatic screw displacement alarm 5. Feeding & Vacuum Degassing • Feeding Motor Power: 0.75 kW • Feeding Speed Control: DELTA frequency inverter • Feeding Operation: Independent or synchronized with extrusion • Vacuum Degassing Pump: 2.2 kW 6. Control & Electrical Components • Main Motor: 22 kW • Motor Cooling: Forced cooling • Main Frequency Inverter: DELTA • Temperature Controllers: OMRON • AC Contactors: Schneider • Electrical Control Cabinet: Included

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa Dedpsv Iflpsfx Al Aowc • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,797 h, clamping force: 800 kN, screw diameter: 40 mm, total width: 2,042 mm, total height: 1,711 mm, overall weight: 8,200 kg, product length (max.): 4,545 mm, This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Additional information inclusive Wittmann Primus 16T robotTravel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm5 kg payloadControl system: Wittmann CNC8, Primus R8.3 softwareR8 Teachbox TouchVacuum circuit with additional 5/2-way valve • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input Djdpfx Alex D Rlpj Aswc • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS presentExtrasSocket box 1:X2510, Cekon, 16A /400V, 3P-N-PE via HSX2511, Cekon, 16A /400V, 3P-N-PE via HSX2512, Cekon, 16A /400V, 3P-N-PE via HSX2513, Cekon, 16A /400V, 3P-N-PE via socket contactor(Function 0060)Sockets for colour dispenser:1X2507 / 1W7145, Schuko 10A / 230V, 1P-N-PE, via HSplus 1X9507 / 1W9507, Schuko 10A / 230V, 1P-N-PE, via HSMount sockets and base housings on bracket 110.180.6902(Function 0060)1X3123, Zone 12 HAN 4A screw-in, power only1X9123, Zone 12 HAN 4A screw-in, sensor only(Function 0110)Pneumatics 1, 1x3/2WV 890L, mounted on DAP, W2008(Function 0470)Pneumatics 9, 1x3/2WV 890L, mounted on BAP, W2016(Function 0470)Cooling water 1:X4051 W9088 Flow measurement B1135 - B1138 (return),Pressure measurement B1211 (flow)X4060 W9260 HAN16E Temperature measurementB0801 (flow), B0832 (return)(Function 0490)Cooling water 2:X4050 W9086 Flow measurement B1147 - B1150 (return),Pressure measurement B1212 (flow)X4059 W9259 HAN16E Temperature measurementB08813 (Flow), B0814 (Return)(Function 0490)Dosing 1C:1x suction conveyor and 1x paint dosing1X2018/1W7146, HAN 4A for paint dosing1X9191/1W9946, HAN 3A for suction conveyormount sockets and base housings on holder 110.180.6902(Function 0550)

Condition: new, SIEMENS contactor Dwodpfeu U Ulgex Al Aoc 1st type - 3 TF 46 - 3 pieces 2nd type - 3 TF 48 - 1 piece 3rd type - 3 TF 54 - 1 piece 4th type - 3 RT 1054 - 1 piece 5. type - 3 RT 1075 - piece 6. LC 1D 65008 - 1 piece

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Electrical data: Dsdpfx Aoxxrnbel Aowc # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer # Part detection P/Y: with low-pressure air monitors # In-process measurement: Marposs T25 # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described.

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: AU170124-01, APPLICATION AREA UP TO NOW: Positioning/handling of panels from L/W/H 1500mm x 1500mm x 12mm up to L/W/H 8000mm x 2500mm x 80mm EQUIPMENT: Djdpfx Alsytphie Aowc Traveling gantry with synchronized drive Vacuum lifter beam with automatically switchable suction rows, adjustable based on the respective workpiece length Schmalz vacuum generator with area suction grippers Clamp cartridges next to the suction cups ensure vacuum activation Z-lift of the suction spider via scissor guides Z-axis asynchronous motor, MoviDrive frequency converter, belt drive Interfaces for upstream and downstream stations Control system: Siemens S7-300 CONTROL CABINET: Power supply, power, and control section with main switch, power supply unit, motor protection switches, automatic circuit breakers, power contactors, auxiliary contactors, Simatic S7-300 control system consisting of a CPU315F-2PN/DP, PN/PN coupler, 1 pc. Micro Memory Card, Ethernet interface, all necessary digital input and output modules, and terminals, fully wired. Fieldbus system: Profinet-Safe.

Condition: ready for operation (used), functionality: fully functional, Tower crane 32/K/45 Crane with max jib of 30 m Lifting capacity from 1,000 to 4,700 kg Counterweight (concrete) 16,000 kg The slewing motor, hydraulic pump, cylinder seals, hoses, ropes, and contactors have been replaced on the crane. Spare parts list and operating manual available. With remote control. Dwsdpfx Aszr D Ugsl Aec

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, BITZER 4M35.2 (F 400 H) | Compressor unit | Piston refrigeration compressor with a tank Manufacturer: BITZER Kühlmaschinenbau GmbH Compressor model/type: 4M35.2 Tank model/type: F 400 H, Capacity: 39 liters Unit serial number: 4810377 Year of manufacture: 1995 Power supply: 400 V / 50 Hz / 3 phases Rated electrical power: 26 kW Refrigerant: R417A Allowable operating pressure: 28 bar Overall dimensions of the unit: 2800 x 1300 x 1900 mm Vertical buffer/accumulator tank Dimensions: Ø 1100 x 2600 mm Industrial circulation pump Grundfos Complete power and control switchboard Dimensions: 850 x 1300 x 350 mm Technical condition and completeness: Dwjdpsy Ufh Aefx Al Aoc This professional, industrial refrigeration compressor (compressor-condenser unit) is a high-performance device designed for commercial and industrial refrigeration systems. Units of this type are widely used in meat processing plants, butcher shops, slaughterhouses, cold storage warehouses, breweries, and the dairy industry to supply refrigeration and freezer rooms, quick-cooling tunnels, or technological lines for cooling liquids. The heart of the system is the legendary, 4-cylinder semi-hermetic Bitzer compressor, characterized by its exceptional performance, high energy efficiency (even under partial load), and unparalleled mechanical durability. The compressor is integrated with a horizontal Bitzer F 400 H liquid tank with a capacity of 39 liters (pressure resistance up to 28 bar), which acts as a buffer for the liquid refrigerant, stabilizing the operation of the entire system under varying ambient temperatures and evaporator thermal loads. The offered set also includes additional extensive supporting infrastructure: a vertical medium buffer tank (dimensions: Ø 1100 x 2600 mm), a high-performance Grundfos circulation pump, and a control switchboard with complete electrical equipment and protection devices (pressure switches, contactors). Thanks to this, the unit can be used directly as a complete, self-contained refrigeration machine room.

Condition: excellent (used), rotational speed (max.): 1,480 rpm, For sale: a professional, perfectly matched, high-power drive system. The set includes two key components: a robust German AEG electric motor with a power of 110 kW and a modern Lovato Electric microprocessor-based soft starter (195 A). Please note: the sale includes only the main components shown in the pictures (motor + soft starter). The offer does not include the control cabinet housing, wiring, or auxiliary contactors. Using this set guarantees a safe, fully controlled, and smooth start-up of a powerful machine. The soft starter eliminates mechanical shocks in the gearboxes and drastically reduces the high inrush current, preventing voltage drops and tripping of the main protection devices in the facility. ⚙️ 1. ELECTRIC MOTOR SPECIFICATIONS: Manufacturer: AEG (Germany) Model / Type: AM 315 SX 4 H1 Rated power: 110 kW (150 HP) Rotational speed: 1480 rpm (4-pole) Supply voltage: Δ 380-400 V / 50 Hz Rated current: 212 A Insulation class: Class B Technical standards: VDE 0530/66 Visual condition: The motor has a robust cast-iron housing, is in perfect working order, and has a transport lug. The shaft end with a key is protected by a metal cover. It has grease fittings for regular bearing lubrication (bearing lubrication every 4000 hours). ⚙️ 2. DIGITAL SOFT STARTER SPECIFICATIONS: Manufacturer: LOVATO ELECTRIC S.p.A. (Bergamo, Italy) Model / Type: ADXL 0195 600 Rated operating current: 195 A (Provides an optimal margin for this motor) Main circuit voltage: 3 x 208...600 V AC (~ 50/60 Hz) Control voltage (auxiliary): 100...240 V AC Interface and connectivity: Built-in LCD screen, operator keyboard (4 buttons), status LEDs (POWER, RUN, ALARM), and wireless NFC technology and an IR port for easy programming of the start ramp using a smartphone. Protections: Advanced, built-in protection against motor overload, phase imbalance or phase failure, and shaft jamming. 🚀 IDEAL APPLICATION: The set was used in the wood industry, but it will also perform perfectly in any demanding machine with a heavy start-up: Multi-blade saws, edgers, advanced industrial wood chippers. Stone crushers, concrete crushers, impact mills, and screens. Large screw compressors, blowers, and industrial pumps. 🚚 DELIVERY AND CONTACT: The equipment is in good working order, clean, and ready to be installed in a new cabinet. Dodpfx Asy Tzw Rol Aewc Due to the motor's considerable weight, personal collection is preferred (we can provide loading with a forklift / crane on site). We can also arrange dedicated pallet transport. Price for the complete set (Motor + Soft Starter).

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Cabinet length: from 250 to 2500 mm Cabinet depth: from 250 to 700 mm Cabinet height: from 150 to 1400 mm Working height: 300 mm Djdpszphrkefx Al Ajwc Pressing pressure (fixed): max. 15 kN Positioning speed (fixed): 25 mm/s Transport interface: no Control: via contactors/protection devices Weight: approx. 2.2 t

Condition: excellent (used), The REX Düker Hydro 65 is a bowl cutter from REX Düker, a recognized manufacturer of machinery for the meat industry. The machine is designed for chopping and cutting meat raw material for the production of sausages, cold cuts, and other products requiring precisely prepared meat batter. How does the REX Düker Hydro 65 bowl cutter work? The Hydro 65 is equipped with a 65-liter bowl and a 6-knife cutting head, driven by a 20 kW main motor. Thanks to the hydrostatic transmission, blade shaft speed is infinitely variable up to 4500 rpm, allowing the intensity of cutting to be precisely matched to the type of raw material being processed. The bowl rotates at up to 500 rpm in both directions, and the machine offers 3 separately switchable bowl speeds. Operation is controlled via an SL23 membrane keypad with contactor control and motor protection, while smooth speed regulation is available through a potentiometer. A digital display shows blade shaft speed, bowl revolutions, and temperature in real time, and safety switches for the bowl and temperature ensure safe operation. Key advantages of the REX Düker Hydro 65 The REX Düker Hydro 65 stands out with infinitely variable blade speed thanks to its hydrostatic drive, allowing the cutting process to be precisely matched to different recipes and types of meat raw material. Three independently switchable bowl speeds, together with bidirectional bowl rotation, further increase the machine’s operational flexibility. A robust stainless steel construction, a control panel with a digital display of operating parameters, and a noise protection cover combine high functionality with comfortable, safe operation — an important factor for daily, intensive work in a meat processing plant. Dwedpfx Aljztxx Nj Aec Technical specifications of the REX Düker Hydro 65 Manufacturer: REX Düker Machine type: Hydro 65 Bowl capacity: 65 l Cutting head: 6 knives Main motor power: 20 kW Blade shaft speed: infinitely variable up to 4500 rpm (hydrostatic transmission) Bowl speed: up to 500 rpm, bidirectional, 3 speeds Power supply: 400 V, 50 Hz Protection: 63 A slow-blow fuse Controls: SL23 membrane keypad, digital display Application of the REX Düker Hydro 65 bowl cutter The REX Düker Hydro 65 is used in meat and sausage processing plants, wherever precise chopping and mixing of meat raw material is required for the production of fillings, sausages, cold cuts, and other products with a uniform consistency. Infinitely variable blade and bowl speed make the machine well suited both to recipes requiring gentle cutting and to intensive chopping of raw material.

Condition: used, 5 5 kW Dodpozrxqijfx Al Ajwc as good as new

Condition: good (used), Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1425 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 54 -Number: 2x electric motor available -Price: per piece Dwjdpewz D Hwsfx Al Ajc -1x: Fan cover defective -Dimensions: 420/247/H300 mm -Weight: 40 kg

Condition: reconditioned (used), Awl grinding machine Manufacturer: harich (Deckel) Model: SSMplus (S0E) Refurbished, with CE marking Includes warranty Equipment: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - New machine electrical system in accordance with current safety regulations - Documentation for the machine and control cabinet in printed form, consisting of: - Operating manual Dwedpfx Asz Hy E Iel Ajc - Wiring diagram - CE declaration of conformity Additionally equipped with safety measures in accordance with standard EN 60204-1, consisting of: - Control cabinet with main switch, power supply, contactors, motor protection, safety switching devices - Emergency stop mushroom button instead of the main switch on the machine - Green button for turning the machine on (illuminated) - Red button for turning the machine off - LED status indicator in the form of the harich logo: - Blue for machine on - Green for grinding spindle on

Year of construction: 1976, condition: used, machine/vehicle number: WR2, Demag overhead crane Crane canopy Crane runway Indoor crane Crane Payload / lifting capacity 5t - 5000KG, track 13900mm Outer dimension with endcarriage approx. 14000mm Rope hoist P-pull P412 M11 - 4 strand with fine lift Year of manufacture 1976 with floor control Djdpfsrnmzzjx Al Ajwc Overall height top edge of crane to hook approx. 1000mm Endcarriage length with buffer approx. 3000mm Lifting height rope hoist 5500mm Weight approx. 3200KG Control system overhauled, new contactors etc. installed, cable towing with towing chain added Crane is dismantled, available immediately from location 79664 Wehr. Inspection book is available Good used condition Pillar jib cranes and wall-mounted jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please ask for zip code Collection preferred

Condition: used, LDS V455 Vibration Testing System / Shaking Testing System Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker: V455 Machine Type: Electro-dynamic Vibration / Shaking Testing System Power Amplifier: LDS PA 1000 Power Amplifier For sale is a used vibration and shaking testing system from Ling Dynamic Systems Ltd. (LDS). The system consists of an electro-dynamic LDS V455 shaker, a PA 1000 power amplifier, and a separate fan/cooling unit. The system is suitable for generating defined mechanical vibrations, as well as for vibration, stress, and component testing. Possible applications include use in laboratories, development, quality assurance, and industrial testing. Technical data: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker: V455 System: Electro-dynamic Vibration / Shaking Testing System Power Amplifier: LDS PA 1000 Power Amplifier Amplifier Output Current Indicator: 0–20 A RMS Year of Manufacture: Not specified Fan Motor: Manufacturer: ASEA / Electrolux Elmotor A/S Type: M056SX2 Voltage: 220–240 V Current: 2.0 A Speed: 2,880 RPM Protection Class: IP54 Insulation Class: B Capacitor: 1.5 µF / 360 V Country of Manufacture: Denmark Fan: Manufacturer: Air Control Installations (Chard) Ltd. Type: 2M53 Voltage: 240 V Dwodpfx Alozulngs Aoc Phase: 1 Frequency: 50 Hz Current Draw: 0.45 A Speed: 2,880 RPM Capacitor: 1.5 µF MFD: 440 VAC/WKG: 25 Made in U.K. Dimensions: The overall dimensions of the system cannot be clearly determined from the available images and nameplates. Equipment: LDS V455 electro-dynamic shaker LDS PA 1000 power amplifier Separate fan/cooling unit Shaker mounting / base frame Hoses and connection cables Transport case for the power amplifier Accessories as shown in the images Shipping data: Total weight: 240 kg Condition: Used Signs of wear and tear due to age and use are present. Dirt, paint chips, and traces of corrosion are visible. Optical condition as shown in the images. Scope of supply: 1 × LDS V455 electro-dynamic shaker 1 × LDS PA 1000 power amplifier 1 × Fan/cooling unit Shaker mounting / base frame Connection cables and hoses as shown in the images Transport case for the power amplifier Accessories as shown in the images Availability: by arrangement. Scope of supply as shown in the images. Subject to changes, errors and prior sale.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Dwsdpfx Alsxt Ilfo Aec Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Dsdpex Hifvjfx Al Aswc

Condition: used, Barrenschütz, DC contactor, contactor, DC switch, power contactor, power switch, high-voltage switch ABB Type NORR63-03 CC-SP FPL7146886R6000 CTC2014028R0001 Contactor Type: Normally open main contacts Design: Open, mounted on a bar Actuator: AC + laminated magnetic circuit + rectifier + shunt resistor Actuator rated voltage: 220-230 V / 50-60 Hz Main contact rated current: 63 A Main contact rated voltage: 1500 VDC Number of main contacts, normally closed: 0 Number of main contacts, normally open: 3 Number of auxiliary contacts: 1 normally open + 1 normally closed + 1 changeover Auxiliary contact rated current: 6 A - Main contacts with deion chambers for rapid arc quenching Dimensions W x H x D: 410 x 250 x 195 mm Dwjdjfipfuepfx Al Asc Weight: approx. 9 kg Used, but in very good condition.

Condition: excellent (used), MyRef MY-ZB26-TFD Refrigeration Unit MyRef MY-ZB26-TFD Condensing Unit suitable for refrigeration applications Typical applications include: Freezer chests in supermarkets and convenience stores Cold storage warehouses Beer cellars Milk cooling systems Standard features: Copeland Scroll M compressor ZB series with sound-dampening shroud Oil sump heater Liquid receiver with burst protection Filter drier Sight glass visible from the outside Ball shut-off valves Component-tested combined HD/ND safety pressure switch Electrical equipment: Control box IP 55, compressor contactor, DIN rail mounting Condenser is integrated and protected within the housing Dwodpfx Alevtl T De Asc Condenser fins coated with epoxy resin phenol (gold lacquer*) High-quality housing: solid construction in 1.5 mm galvanized and powder-coated steel sheet, base plate and feet in 2 mm steel sheet Frame construction with individually removable panels; all screws and components are easily accessible from the front with minimal effort Riveting nuts with locking screws for secure, long-lasting fastening without rust problems; pressure-controlled speed controller with EMC filter Space-saving mounting of multiple units side by side possible; required mounting distance 25 mm Type: MyRef -ZB26-TFD Copeland Scroll Condensing unit type: MyRef -ZB26-TFD Installed compressor type: ZB19-KQE-TFD-525 Sound pressure level: 39 dB(A) @ 10 m Receiver volume: 6 liters Airflow: 4500 m³/h Refrigeration capacity: 9 kW Voltage: 400V, 3-phase, 50Hz Current consumption: 8.9 A Dimensions: H x W x D: 715 x 1120 x 450 mm Weight: 102 kg You can find more new and used items in our shop! International shipping costs available upon request!

Condition: like new (used), operating hours: 349 h, functionality: fully functional, input voltage: 400 V, input current: 1,037 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP00, year of last overhaul: 2026, continuous power: 630 kW (856.56 HP), Equipment: type plate available, Exact model designation: Schneider MX eco 4V630 Output power and output current: 630kW | 1188A ME4C63AAA ° With test certificate! ° Only 349 motor operating hours - according to the manufacturer, over 100,000 possible! ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included ° 2 additional control cabinets with various components tailored to the inverter included (buying drive without extra components possible) The following additional components are installed (see pictures): ° 2 pcs. RFI 480/600-TN (RFI filters) ° 2 pcs. NH fuse switch disconnectors, size 3 | I = 630A ° 2 pcs. ABB AF580-30 | I = 800A (Power Contactor) ° 2 pcs. ABB AG09083735 (Circuit Breaker) ° SMF 480/1200 | 1200A (Sine Wave Motor Filter) ° 2 pcs. ABB AF750-30 | I = 1050A (Power Contactor) Only 1 unit left in stock! Dodpex U Dvrefx Al Ajwc This item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the item's visual condition. Fully functional and ready for immediate use.