Used Antike Pumpe for sale (8,884)

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Hnsdpfx Apozzwblj Het Year of construction: 2021 - Rarely used Flanges DN40 Voltage: 230 V mono (see technical details on photos)

Condition: used, functionality: fully functional, fuel type: diesel, overall weight: 38,000 kg, empty load weight: 11,820 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, Year of construction: 2006, operating hours: 9,184 h, We are selling our Bremat F2.15, manufactured in 2006, with a current operating time of 9,184 hours. The system is in good, age-appropriate condition and shows the usual signs of wear and tear. It is fully functional and ready for immediate use. Until recently, we were still using the system ourselves in our ongoing operations. The sale is solely due to the purchase of new equipment. Hnjdpfx Aszu Iiyop Hst Data & Condition: Manufacturer/Model: Bremat F2.15 Year of manufacture: 2006 Operating hours: 9,184 h Condition: good, age-appropriate signs of wear and tear Fully functional and ready for immediate use Next TÜV inspection due 08/2026 A new TÜV inspection can be carried out upon request and after consultation Sale is made with the system deregistered The upper cover sheet is missing and would need to be replaced. However, this does not affect the function or operational readiness of the system. An inspection of the system is possible by prior arrangement. Further information and pictures can be provided upon request and with serious interest. The system is sold as a used semi-trailer in its current condition.

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Flanges DN40 Voltage: 230 V mono Hnodpfx Apjzzwbrs Hot (see technical details on photos) Year of construction: 2021 - Rarely used

Condition: used, Year of construction: 2023, operating hours: 100 h, functionality: fully functional, overall weight: 151 kg, total length: 1,174 mm, total width: 644 mm, total height: 528 mm, volume flow: 250 m³/h, power: 5.5 kW (7.48 HP), type of cooling: air, Becker VTLF 2.250 vacuum pump – manufactured in 2023 For sale is a Becker VTLF 2.250 vacuum pump from our carpentry workshop. The pump was purchased new in 2023 and, according to our assessment, has fewer than 100 operating hours, as it was only used very rarely. It is in very good condition and, to the best of our knowledge, is technically flawless. The original invoice from 2023 is available and can be viewed if there is serious interest. The VTLF 2.250 is a dry-running rotary vane pump designed for rough vacuum and continuous operation. It uses self-lubricating vanes made of a graphite composite, requires minimal maintenance, and does not require oil changes. Hedpfjzi A D Iox Ap Hent Suitable for, among other applications, CNC vacuum tables, vacuum clamping systems, membrane presses, handling equipment, and other applications in the wood, plastics, and industrial sectors. Technical data: Manufacturer: Becker Model: VTLF 2.250 Year of manufacture: 2023 Designation: VTLF 2.250 C300127 Operating hours: approx. 100 Dry-running rotary vane pump for rough vacuum Oil-free Designed for continuous operation Self-lubricating vanes made of graphite composite Low maintenance No oil change required Total power consumption: 5.5 kW Dimensions L/W/H: approx. 1,174 × 644 × 528 mm Weight: approx. 151 kg Inspection possible by arrangement. Location: Rebgeshain Sale from the location, without transport. Collection or shipping via a freight forwarder can be arranged. Price: €3,500 net, negotiable Sale exclusively to commercial customers. Used machine sold as is, with exclusion of any warranty for defects. No guarantee. Subject to prior sale.

Condition: like new (used), Year of construction: 1999, overall weight: 6,000 kg, volume flow: 300 m³/h, input frequency: 50 Hz, rotational speed (max.): 2,950 rpm, 11: Industrial pumps of the KSB brand 1 unused, 3 used KSB centrifugal pump + motor unit LUV h 150-340/2 Product information: Manufacturer: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture: 1968 Origin: Plant Frankenthal (Pfalz), Germany Condition: Used, but in good condition ⚙️ Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚡ Technical data – Motor: Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 Motor number: 2-151-134 874/1 📦 Description: This industrial high-performance pump from KSB is ideal for transporting large amounts of liquid. The pump is sold together with the matching motor unit. Manufactured to the solid German engineering standards of its time, known for durability and high performance. 2. Pump info: KSB centrifugal pump + motor unit Brand: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture of the pump: 1968 Origin: Plant Frankenthal (Pfalz), Germany 🔧 Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Hnedpfowq Shbox Ap Hot Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚙️ Technical data – Motor: Type: LUv 5/2 F9 30-605 Motor No: 2-151-134 874/2 Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 📌 Condition: Used, but in good condition. Stored after disassembly from an industrial plant. Technical data has been verified based on the nameplate.

Year of construction: 2003, condition: used, Applicable material: Water = Dealer information = Hnsdez A U Ayspfx Ap Hjt Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Year of construction: 2023, condition: used, Pump speed 2.934 U/min Nominal delivery flow 45 m³/h Rated head 92,8 m Capacity 18,5 kw In our assessment, the pumps are in good used condition. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Hnjdpfx Apezz S Nqj Hjt

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Refrigerant pump station, complete with a control cabinet, pumps, and connecting fittings. The entire unit is mounted on a steel platform. Available for sale as a complete set or in individual components. Pumps with a capacity of 60 m3/hour are also available separately. Hnsdpfx Ajzu R S Dop Hjt

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Hsdpfx Aszy Ndcjp Hont Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Year of construction: 2023, condition: like new (used), functionality: fully functional, EDUR CBL 80-200/211 Centrifugal Process Pump, 111 m³/h, 28.8 kW, Stainless Steel, 2023 Description For sale: an industrial EDUR CBL 80-200/211 process pump from the renowned German manufacturer, EDUR Pumpenfabrik. The pump was manufactured in 2023 and is in fully functional condition, ready for immediate operation and requires no additional investment. The unit is made of AISI 304L stainless steel and equipped with an energy-efficient Lammers IE3 Premium Efficiency motor. The pump is mounted on a steel frame. It is ideally suited for use in the food, chemical, and oil industries, as well as in process plants. Technical data * Manufacturer: EDUR * Model: CBL 80-200/211 * Year of manufacture: 2023 * Condition: used, fully functional * Type: centrifugal process pump * Flow rate: 111 m³/h * Head: 56.1 m * Motor power: 28.8 kW * Motor: Lammers IE3 Premium Efficiency * Voltage: 400/690 V * Frequency: 50 Hz * Speed: 2900 rpm * Maximum working pressure: 10 bar * Maximum medium temperature: 60°C * Material: AISI 304L stainless steel * Motor protection class: IP55 * Weight: 308 kg * Available immediately Application The pump is designed for the transportation of: * vegetable oils, * animal fats, * biodiesel (FAME, UCOME), Hedey Amr Sepfx Ap Hent * fatty acids (FFA), * food liquids, * chemical liquids, * process media, * process water. EDUR CBL 80-200/211 Process Pump | 111 m³/h | 56.1 m | 28.8 kW | AISI 304L | Year 2023

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 358143, Hydra-Cell G10XKSGSFEMB diaphragm high pressure pump with 4 kW motor, build in inverter, manual control unit (on/off and speed), external cooling and 34,5-69 bar over pressure valve. Hnjdpfx Ajzv Ibfep Hst Possible to switch to different control modes and ramps through DIP switches. Model: G10 X: Standard high-pressure performance K: Kel-Cell version S: 316L pump head G: Vition/FKM Diaphragm and O-ring S: 316L valve seat F: 316L valves E: Elgiloy valve springs M: Kynar/PVDF valve spring retainer B: 10W30 motor oil 30,6 liter/min (1,8 m3/h) at 1450 RPM. 69 bar (1000 psi) at 1450 RPM and 103 bar (1500 psi) at 790 RPM. Max inter pressure of 17 bar and 121 degree celcius maximum fluid temperature. Able to handle solid particles up to 500 microns (0,5 mm) It has a crack in the back left mounting foot (see picture)

Condition: excellent (used), Year of construction: 2017, operating hours: 19,907 h, functionality: fully functional, machine/vehicle number: 25221, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC640, table load: 1,400 kg, rotary table diameter: 800 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 4,408 h, coolant supply: 80 bar, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 42, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2017, Heidenhain TNC640 - Machine run time: 19,907 hours, Spindle run time: 4,408 hours - HSK-A 63, 18,000 min-1 - SRT800 torque drive in the C-axis - Tandem drive in the A-axis Hnjdoz A Tzhspfx Ap Hjt - 42 tool positions - Internal cooling system (IKZ) 80 bar, Varioventil adjustable from 0-80 bar - Compressed air at spindle center - External blow-off system - Air curtain for scale protection - Chip flushing gun - Automatic cabin roof - Electronic handwheel - Heidenhain measuring probe - Signal light - BLUM tool breakage/measurement system - Dynamic Efficiency - Dynamic Precision - Hermle WDS - Kinematic-Opt - Adjustable control panel - HIMS - Event messenger In very good condition - low spindle hours. The machine has previously been connected to a central coolant system. The machine will be delivered with a new tank and band filter, as well as a pump that supplies the IKZ and external cooling system (AKZ) pump. Functionally very similar to the standard Hermle configuration. We guarantee flawless operation and will gladly commission the machine at your location.

Condition: excellent (used), Year of construction: 2024, SPX Waukesha 034-U2 Lobe pump 2024, port size 2 inch, up to 24 GPM (5.5 m3/hr), displacement 0.227 liters per revolution, never been into production Hjdpfjzzf Iyjx Ap Hont

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Hjdpfszz Tm Rex Ap Hent Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price Euro 3.590 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, mileage: 268,122 km, fuel type: diesel, tire condition: 90 %, fuel: diesel, color: white, Year of construction: 2007, operating hours: 552 h, For sale: Mercedes-Benz Actros 3244 equipped with a concrete pump and mixer, in excellent working condition. ✅ Make/Model: Mercedes-Benz Actros 3244 ✅ Mileage: 268,000 km ✅ Operating hours: 552 hours ✅ Equipment: Integrated concrete pump and mixer ✅ Condition: Fully functional, ready to work ✅ Maintenance: Regularly serviced and maintained in good condition Hjdpfxezfau Nj Ap Hent A robust and reliable vehicle, ideal for construction companies, concrete plants, and large-scale projects. Operational equipment, requiring no intervention, ready for immediate use. Highlights: Low number of operating hours Mercedes-Benz mechanics, renowned for their durability Excellent working capacity Pump and mixer unit in full working order Ready for inspection and testing Price: Upon request 📞 For more information, additional photos, or to schedule a visit, please contact us.

Condition: like new (used), Grundfos MGE100LA 2-FF215-JA-300 pump 3.00 kW Speed: 2900 - 4000 rpm Weight: 24 kg You are welcome to visit us for an inspection. Hodezzmhzepfx Ap Hont We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: B440, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 300 rpm, rotational speed (min.): 60 rpm, Equipment: CE marking, rotational speed infinitely variable, OMAC B440 3600 VX Hygienic Rotary Lobe Pump Unit – Fully ATEX Rated – 2021 Complete hygienic rotary lobe positive displacement pump unit by O.M.A.C. S.r.l. (Italy), professionally decommissioned from an INEOS manufacturing facility. Fully matched ATEX drivetrain — pump, gearbox and motor all Category 2G (Zone 1) rated, suitable for installation in hazardous area environments. Suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Ready to install. Pump: Manufacturer: O.M.A.C. S.r.l., Italy Model: B440 3600 VX Year: 2021 Wetted parts: AISI 316L stainless steel Connections: 4" (DN100) hygienic tri-clamp Hnjdpfx Aozmgdaop Hot ATEX: II 2G Ex h T4 Gb Gearbox: Motovario HR 101M helical reducer Ratio: i = 4.88 Torque: 530 Nm ATEX dual-rated Motor: Cemp E3AB70 132M-4 — 7.5 kW 400V Δ / 690V Y, 1462 rpm ATEX: Ex db IIB T4 Gb IP55, IE3 efficiency Inverter-rated (S9 variable speed duty, PTC 120°C thermal protection) Pump shaft speed approx. 300 rpm at 50Hz (approx. 60–300 rpm range on inverter) Complete unit mounted on a stainless steel baseplate with forklift access. 3 identical units available — matched factory batch with consecutive serial numbers across pump, gearbox and motor. Price is per unit. Condition: New other. Excellent, clean condition throughout — see photos. Inspection welcome prior to purchase. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Year of construction: 2007, operating hours: 1,302 h, condition: excellent (used), functionality: fully functional, Putzmeister 1407 D stationary pump. Fully refurbished and renewed. Sandblasted and painted. New oil and filters. Many new parts. Like new. Ready for work. The Putzmeister BSA 1407 D is a reliable stationary concrete pump with the following specifications: Hsdpeytcfhjfx Ap Hont Engine: diesel engine Output: Up to 71 cubic meters per hour Vertical Reach: 100 meters Horizontal Reach: 250/300 meters Maximum Pressure: 106 bar Capacity: 600 liters (Concrete hopper with agitator). This pump is designed for medium-sized construction sites and is known for its durability and efficiency. We accept barter.

Condition: used, functionality: unexamined, For sale is a Leybold RUTA vacuum pump unit in adapter configuration, consisting of a RUVAC WS 501 rotary lobe pump and a TRIVAC D 65 B rotary vane pre-pump. Technical data and markings: - Configuration: RUVAC WS 501 / TRIVAC D 65 B / Adapter - RUVAC catalog number: 11732 - RUVAC nominal pumping speed: 505 m³/h - TRIVAC D 65 B, catalog number 11296 - TRIVAC serial number: 31000491088 - TRIVAC pumping speed: 65 m³/h - Pumping speed of the pump unit at 0.1 mbar: approx. 380 m³/h - Ultimate partial pressure: < 2 × 10⁻⁵ mbar - Installed motor power: approx. 4.4 kW - Connections: DN 63 ISO-K on the suction side, DN 40 ISO-KF on the discharge side - Druschke article number: SGWS501 - Druschke serial/ID number: 11732-ID15931 - RUVAC marking 2003/08; TRIVAC marking CW 31/2011 Visible scope of supply according to the images: - RUVAC WS 501 - TRIVAC D 65 B - Direct adapter - Side filter/separator housing - Connection line, cable, and plug - Base frame with drip tray Used condition with dirt, paint damage, and slight corrosion. The operational condition and achievable vacuum performance were not re-tested after disassembly; therefore, it is sold as untested. A control cabinet or frequency inverter is not shown and is not part of the described scope of supply. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and by prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale. Hsdpozzr Nkefx Ap Hont

Condition: used, mileage: 263,844 km, power: 338 kW (459.55 HP), first registration: 09/2007, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, color: yellow, gearing type: semi-automatic, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, Internal vehicle number: VTC30034 Hjdoy Ngmiopfx Ap Hent Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) MERCEDES BENZ ACTROS 2646 6x4 concrete pump Putzmeister BSF 36-4.16 Permissible total weight 27,000 kg 5 operating hours Final hose, max. 4 m Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: good (used), Year of construction: 2017, Item: LC-10549 – Alfa Laval pump LKH70-110kW Alfa Laval LKH-70 Centrifugal Pump – 110 kW Used Alfa Laval LKH-70 sanitary centrifugal pump, suitable for high-capacity applications in the dairy, food, and beverage industries. The pump is equipped with a large Ø280 mm impeller and a powerful 110 kW motor. Technical data: Manufacturer: Alfa Laval Type: LKH-70 Year: 2017 Serial No.: 215309 Motor power: 110 kW Frequency: 50 Hz Impeller diameter: Ø280 mm Inlet: approx. DN100 Outlet: approx. DN80 Maximum flow according to Alfa Laval performance curve: up to approx. 260 m³/h, depending on the required head and product characteristics. Hjdszymx Dspfx Ap Hsnt CE marked Hygienic stainless-steel design Suitable for pumping milk, dairy products, water, and other low-viscosity food products. Original Alfa Laval performance curves are available. Machine located in Denmark and available for sale.

Condition: used, Year of construction: 1994, An on-site inspection is possible. Hodpsz Aggyofx Ap Hsnt

Condition: new, mileage: 500 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Mercedes-Benz Arocs 5 3546 8x4 EURO6 with Schwing concrete pump S 43 SX III 5-section boom ???including Easy-Flex outrigger system??? First registration: unregistered Mileage: 500 km Color: Arctic White Technical Data * Power: 335 kW * Horsepower: 455 hp * Tire size, front and rear: 315/80R22.5 * Gross vehicle weight: 35,000 kg * Emission class: Euro 6e * Transmission: automatic, Mercedes Powershift 3 * Condition: New vehicle Chassis Equipment Hedpfx Asi Tkbdep Hjnt * Twin-plate clutch * M cab Classic-Space, 2.30m, tunnel 320mm * Comfortable cab suspension * Front axle: 7.5t, straight version * Rear axle: 13.4t, bevel gear 233, planetary gear * Transmission oil cooler * Fuel tank: 290L aluminum + 25L AdBlue * Disc brakes, front and rear * Sun visor * Air conditioning * ABS + ASR * Driver's comfort air-suspension seat, velour leather * Fog lights, LED daytime running lights * Multimedia cockpit, interactive with navigation and Bluetooth * Cruise control * GSR (General Safety Regulation) equipment as follows: * Lane Keeping Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Pre-installation for breathalyzer with immobilizer * Rear view camera Superstructure Equipment * Schwing S 43 SX III 5-section concrete pump, 43m * Number of joints: 5 * Delivery line: Super 2000 DN 125 * Vertical reach: 42.30m * Horizontal reach from turntable: 37.55m * Placing boom: 43RZ * Pump type: P2525-120/85 * Theoretical concrete delivery rate: 162 m3/h * Vector control system * Slide valve system: B-Rock * Electric vibrator system on hopper grate * Slewing range: 2 x 365° * Outrigger system: Easy-Flex, CE * Filling height: approx. 1350mm * Hydraulic drive, max. volume: 636 l/min. * Delivery cylinder diameter: 250mm * Water tank: 610l, roller water pump * Remote control: Schwing Control 30 * Oil cooler * MPS control system Non-binding offer ex works Cologne. Subject to prior sale and errors. Sale only to commercial customers.

Condition: used, Liter per hour: 30000 pump type: Centrifugal pump Hjdozz Rhfspfx Ap Hont electrical power supply kW: 15

Condition: excellent (used), functionality: fully functional, volume flow: 320 m³/h, operating pressure: 370 bar, power: 4.6 kW (6.25 HP), input voltage: 380 V, input current: 9 A, rotational speed (max.): 2,910 rpm, protection type (IP code): IP55, Vacuum pump - 2 units VACOM Type: VC 340-720 Hnodpfeyxwp Hjx Ap Hot Power: 4.6 kW With central filters and Motan control system - 2 units Price for 2 units (2 sets) - 5000 EUR!!!