Used Ahena Heating & Blower for sale (13,583)

Condition: excellent (used), Year of construction: 2006, Vitoplex 300 105Kw Year: 2006 Type:TX3 Power: 105Kw With gas or oil burner Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Fedetu Tv Aopfx Aalepg Of course we also take care of all formalities Loading possible Request more information

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: Fabr. Nr. 281007 - 0125, total width: 900 mm, total length: 1,800 mm, total height: 1,250 mm, type of input current: three-phase, volume flow: 1,150 m³/h, nominal heat output: 90 kW (122.37 HP), Equipment: type plate available, We are selling our warm air heater with room thermostat, Kroll M 100, 90 kW, year of manufacture approx. 2000, age-appropriate good condition. Fully functional. Additionally, the following pipes and bends are available for purchase at an extra charge: - 7 pcs. spiral duct, diameter 355mm, length 2000mm - 1 pc. spiral duct, diameter 355mm, length 1000mm - 2 pcs. spiral duct, diameter 180mm, length 2000mm - 1 pc. Y-piece with gasket, 45°, length 800mm Fpsdpfxsxv Akzo Aaljg - 6 pcs. bend with gasket, diameter 355mm, 45° - 1 pc. bend with gasket, diameter 355mm, 90° - 1 pc. reducer, diameter 560/355mm, length 550mm - 8 pcs. sleeve, diameter 355mm - 4 pcs. connector with gasket, diameter 355mm The pipes have previously been installed and riveted.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 1,800 kW (2,447.32 HP), Available directly from stock: 1700kW load bank for fixed installation. 400volt/50hz 6 steps of +/- 250kW Fodpfxouubcte Aalepg 2 steps of +/- 125kW Other steps possible in consultation External control power supply 64Amp/400v/50hz Control via Modbus and HMI in the cabinet Equipped with its own circuit breaker in the casing. Can be extended with a motor. 20Ft container

Condition: excellent (used), Year of construction: 2007, Buderus SB735 low temperature boiler Year: 2007 Output: 1200Kw Burner: Weishaupt oil or gas burner on request Fodpfjnr Ek Usx Aalspg

Condition: used, Delta blower Aerzen blower Type: GM7L Motor power: 5.5 kW Fsdeyt Rhdopfx Aalspg Year of manufacture: 2020 Equipped with frequency inverter

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: CDE:D09C236, CORIS /HERMES 9600 Vial Blower & Filler Line, made in France. Consisting: - a bottle pack blowing machine, with 2 formats (60ml and 30ml), - a HERMES 2009 filling machine with 2 drive rings 10 slots, - a cap dispenser, - laminar flow, - spare parts, - belt conveyor 2200mm x 40mm, sold without peristaltic pump. YOM 2010 EXCELLENT CONDITION Fsdpfertnlaex Aalspg

Condition: excellent (used), Year of construction: 2002, For sale: AHENA thermal plant. In very good working condition. Fjdjxf Nyhopfx Aalopg

Condition: used, Aerzen Blower GMA 11.4 Power: 10kw RPM: 2300 Capacity: 420m3/h Pressure: 1 bar Diameter inlet: 100mm Diameter outlet: 100mm Approx Dimensions: 1300mm X 800mm X 1100mm Fsdpfx Aaewq Sx Helspg

Condition: used, Aerzen Blower GMA 11.4 Complete with ancillary equipment Fedpfewq Sydjx Aalepg

Condition: like new (used), functionality: fully functional, machine/vehicle number: Geo Knight Maxi - Press, Year of construction: 2017, Please see PDF for detailed secifications: The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much Fpedpev Dm Udjfx Aaljg more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, hot and cold peel plastisol transfers and large format laminating processes.

Condition: ready for operation (used), Compressor DWM DLJP-20x-EWL, Compressor DWM DLJP-20x-EWL, Piston Compressor, Cooling Compressor, Heating Compressor, Used machine Technical Specifications Brand: DWM COPELAND Model: DLJP-20X-EWL Refrigerant: Freon Weight: 82 kg Year of manufacture: 1999 Performance at different temperatures: -20ºC/+40ºC: 4.98 kW -30ºC/+40ºC: 2.75 kW Maximum pressure values: 28/22.5 bar Delivery capacity: 14.50 m³/h Dimensions: Length: 460 mm Width: 330 mm Height: 550 mm Electrical Data: Fjdpfju T H Rlsx Aalspg 400V; 5.6A; 1450 RPM

Condition: used, HB-Therm HB-100 U1 temperature control unit, Temperature control, Liquid temperature control, Industrial temperature control, Thermolator, used machine Manufacturer: HB-Therm Type: HB-100 U1 Overall dimensions: 200 × 650 × 500 mm Fjdpfxeyzmago Aalepg Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: water

Condition: used, Heat exchanger, cooling condenser, Güntner heat exchanger, GVV050.1A/1-X.E, used machine Fpsdpeyz Twxjfx Aalog Manufacturer: Güntner Type: GVV050.1A/1-X.E Year: 2016 Overall dimensions: 1050 x 460 x 820 mm Fan size: 830 x 680 mm Cooling surface: 875 x 810 mm

Condition: used, Heat exchanger, cooling condenser, Güntner heat exchanger, GVV050.1A/1-X.E, used machine Manufacturer: Güntner Fpodpfxoyz Tuke Aalog Type: GVV050.1A/1-X.E Year: 2016 Overall dimensions: 1050 x 460 x 820 mm Fan size: 830 x 680 mm Cooling surface: 875 x 810 mm

Condition: used, Heat exchanger, cooling condenser, Güntner heat exchanger, GVV050.1A/1-X.E, used machine Fsdpfjyz Tttsx Aalspg Manufacturer: Güntner Type: GVV050.1A/1-X.E Year: 2016 Overall dimensions: 1050 x 460 x 820 mm Fan size: 830 x 680 mm Cooling surface: 875 x 810 mm

Condition: used, Plate Heat Exchanger,Heat Exchanger, SPX 034.MGS.10.1, Used machine Manufacturer : SPX Year : 2012 Fpodpfox Ttu Ijx Aaleg Overall dimensions : 450 x 610 x 1360 mm Heat transfer area : 18.93 m² Operating pressure : 10 bar

Condition: used, Plate Heat Exchanger,Heat Exchanger, SPX 034.MGS.10.1, Used machine Manufacturer : SPX Year : 2012 Fedpfx Aox Da Dujalepg Overall dimensions : 450 x 610 x 1360 mm Heat transfer area : 18.93 m² Operating pressure : 10 bar

Condition: used, Centrifugal fan, 18.5 kW, used machine Overall dimensions: 1680 × 1650 × 1260 mm Weight: 457 kg Electrical data: 400 V; 18.5 kW; 34 A Calculated air flow rate: 11,800 m³/h Fpedpsyzypnefx Aaleg Calculated pressure: ~4500 Pa, 3.96 kg/s

Condition: excellent (used), Year of construction: 2013, Cooling power: 10 kW Heating power: 11 kW Refigerant: R407C Fjdpfx Aajfx S Daslopg Refrigerant diagram, operational limits see at the photos! We have15 unit in stock!

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: LOOS, Gunzenhausen Type: DF 600 Capacity: 600 kg/h Thermal output: 400 kW Max. operating overpressure: 13 bar Water content approx.: 43 l Year of manufacture: 1996 Year of heating coil manufacture: 10 / 2023 Equipped with Weishaupt gas burner, gas control section, Fsdsw I T Ivopfx Aalopg control cabinet mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.

Condition: excellent (used), Large size blastroom for surface preperation and finishing large workpieces 4 shotblasting units Filtration system NEON Lightning 250 W Automatic front door Fpodsygk S Njpfx Aalsg Service door in BMS System Smooth control by means RACK system 2 Abrasive operator system 2 Opperator platform with basket 2 Magic Blast Controllers 4 ACF Shotblasters SV206 with 205Liter Schneider MAGELIS opperator display control panel Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyork washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed Fpedpfx Aaey Nx Ifolog 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 electric power : 26 kW 400V

Condition: used, Year of construction: 2010, operating hours: 13,800 h, power: 1,600 kW (2,175.39 HP), For sale are 3 MTU cogeneration modules / CHP plants manufactured by MTU Onsite Energy GmbH, model AoE16V4000L62, year of manufacture 2010. These plants are ideally suited for decentralized energy generation and combined heat and power (CHP) applications. Fsdpfx Aajyt H H Nslepg Technical specifications (per documentation): * Electrical output: 1,600 kW * Thermal output: 1,746 kW * Gas power: Pgaz PCS 4,579 kW / Pgaz PCI 4,121 kW * Voltage / Frequency: 400 V / 50 Hz Operating hours: * GE1: 42,479 h * GE2: 13,800 h * GE3: 43,397 h The scope of supply, as per documentation, includes a comprehensive range of auxiliary equipment and system components, including: roof-mounted air cooler, auxiliary cabinet, control cabinet, exhaust heat exchanger, water heat exchanger, pipework and ducts with chimney, oil storage room with 3 tanks and piping, as well as electrical cabling. These plants represent an attractive solution for operators, resellers, and projects in the fields of energy supply, industry, or for spare parts recovery.

Condition: used, Year of construction: 2020, HTST ARSOPI 500 Litres Pasteuriser built in 2020 by Dairy Machinery UK and Arsopi, This machine is self heated by heating element of 9kw , It is mounted on a stainless steel frame and comes with a control panel, balance tank, auto valves, product and water pump, 1" inlet and outlet pipes which also act as a CIP loop. The complete process is run automatecly with a divert valve to ensure pasteurisation temperatures and milk flow . The machine has hardly had any use and is in perfect condition. We can support this Pasteuriser in full starting from the controls all down to the gaskets of the PHE . Machines that Can Be added with on extra sale are the below : 1) SEPARATOR Specifications Manufacturer :Seital/SPX Model :SE05 Condition : Used Stock Number:834 Manufacture:Seital Capacity : 1200 L/h Cleaning : Manual Cleaning Tools : Included Manual Book : Included Base Frame : Included 2) HOMOGENISER Specifications Manufacturer : GEA Model: NS20002H Year : 2009 Condition : Used Serial Number : 7818 Stock Number 110613074 Capacity : 30 L/H on 600 Bar Capacity : 500 L/H on 200 Bar Working Pressure: 200 to 600 bar Max No. Stages: 2 condition : Very Good condition Available: Immediately SOLD AS A COMPLETE PACKAGE OR SEPARATE Volume capabilities (litres): 500 Balance Tank: Included PHE Temperatures: 4-45-55-65-72-4 Outlets: Separator and Homogeniser Outlets Divert Valve: Included Dimensions in cm : 160 x 80 x 200 Product Pump: Included Hot Water Pump: Included Comtrols: HMI Touch Screen CIP: Program included for self Clean in Place Specifications Manufacturer: Seital/SPX Model: SE05 Condition: Used Stock Number: 834 Manufacture: Seital Capacity: 1200 L/h Cleaning: Manual Cleaning Tools: Included Manual Book: Included Base Frame: Included Manufacturer: GEA Model Homogeniser: NS20002H Fodjy Ry Hrepfx Aalopg Year: 2009 Serial Number: 7818 No. Stages: 2 Condition Homogensier: Very Good condition Available: Immediately

Condition: used, Year of construction: 2015, cooling capacity: 23.15 kW (31.48 HP), type of input current: three-phase, type of cooling: air, overall weight: 180 kg, input voltage: 400 V, total width: 400 mm, total length: 1,450 mm, total height: 1,540 mm, heating capacity: 23.5 kW (31.95 HP), Aircooled chiller/Heat pump SYSTEMAIR 24 AIR EVO PH 23.15 kW/23.5 kW Fsdpjy Ryqwjfx Aalopg Cooling capacity: 23.15 kW / 6.58 tons (12/7 — 35°C) Heating capacity: 23.5 kW / 6.68 tons (40/45 —7°C) Year of manufacture: 2015 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. (scroll, inverter) Type of refrigerant: R410a Number of fans: 2 pcs. (inverter) Hydraulic module: 1 pcs. water pump Wilo para 25/1-12 t1 (Frequency inverter) Dimensions: 1.45x0.4x1.54 m. Weight: 180 kg. Needs to be configured