Used Pritschenaufbau Mit Wechselsystem Für for sale (7,774)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection Dcodpfez Ir Hajx Ailen - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: ready for operation (used), Tool turret 5603923WZ with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire for charges for packing and transport separately! Dsdpfx Aoz Adlyjilecn

Condition: ready for operation (used), Tool turret 5603923WZ SN:1286 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for packing and shipping costs separately! Dcsdpfxez Adl Te Ailon

Condition: ready for operation (used), Tool turret 5603923WZ SN:1285 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Dcedpfxjz Adl Hs Ailsn

Condition: ready for operation (used), Tool changer unit for Nakamura Tome TW20 with Index motor 22603035, oil pump, used, in good condition, 100% functional. Scope of supply as shown in the photos. PLEASE NOTE: Please request separate pricing for packaging and shipping! Dedpfxjz Adm Rs Ailscn

Condition: ready for operation (used), Sensor cable/interface cable, length 1.8 m, with 2 Honda MR-20L 20-pin connectors for Fanuc, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dsdjz Dnybepfx Ailscn

Condition: ready for operation (used), Rexroth RF03 12 305054 circuit board for rotary encoder with accessories, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dedpfjzzhlzsx Ailjcn

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Djdpfx Ajz Iqp Tjilecn Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis - New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel plate with sliding mechanism and self-lubricating features (Type Jost JSK), mounted on the subframe ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Body: Crane interchangeable system: The body including the crane can be disassembled, and a fifth wheel plate is then mounted on the chassis. The function of the crane and body including the fifth wheel plate is also possible. The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally. A crawler track would also be available, net price is €149,900. ? Assembly/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed body as a steel/welded construction, removable ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed body painted. Color: RAL (chassis color) ? Removable aluminum side boards, manufacturer Suer, height 600 mm, anodized design with steps, removable stake pockets. ? Standard flatbed floor with welded 4 mm steel tread plate, painted in RAL (chassis color) ? 6 recessed lashing points 2500 daN each side, in slot profile with flexible arrangement. ? 4 x lashing points for chains 6500 daN (2x front and 2x rear on the body) ? Sturdy front wall consisting of a welded frame, welded 4mm steel sheet and 5 accessory hooks, front wall height approx. 1300 mm, steel design, painted, with 2 foldable eyelets for lashing straps, welded on. ? Cladding sheets, fenders made of aluminum tread plate (sandblasted, powder-coated and painted) ? Multifix stake pocket, 2 rows with a distance from the front and rear of approx. 80 cm. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection device at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers and also at the rear for trailers. ? New crane, type FASSI F545 RA 2.27 with continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hyd. extensions. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating manual, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front wall ? 2 x rotating beacons on the FH roof ? 2 x FLASH lights in the bonnet ? 2 x LED under the body at the rear, each on the left and right, arrangement to be agreed. ? 4 x LED AS, 2x on the left and 2x on the right under the body in the area of the support legs, mounted. ? 4 x yellow LED light strips, 1x mounted on each support. Dcjdsy Hm Eyepfx Ailon Further information is available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis - New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel plate with sliding mechanism and self-lubricating feature (Type Jost JSK), mounted on the subframe. ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Superstructure: Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel plate is then mounted on the chassis. The crane and superstructure, including the fifth wheel plate, can also be used in combination. The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally. A crawler undercarriage would also be available; the net price is €149,900. ? Mounting/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front ? Platform body as a steel/welded construction, removable. ? Length approx. 380 cm, width approx. 248 cm. ? Platform body painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized finish with steps, removable stake pockets. ? Standard platform floor with welded 4 mm steel checker plate, painted in RAL (chassis color). ? 6 recessed lashing eyes, 2500 daN each, per side, in a slot profile with flexible arrangement. ? 4 lashing points for chains 6500 daN (2 in the front and 2 in the rear of the superstructure). ? Stable front wall consisting of a welded frame, welded steel sheet 4 mm and 5 accessory hooks, front wall height approx. 1300 mm, steel, painted, with 2 folding eyelets for lashing straps, welded on. ? Side panels, mudguards made of aluminum checker plate (sandblasted, powder-coated and painted). ? Multifix stake pocket rows, 2 rows with a distance of approx. 80 cm from the front and rear walls. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support under the chassis. ? Mounting of an underrun protection at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers and at the rear for trailers. ? New crane, type FASSI F545 RA 2.27 with endless rotation, fully assembled, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. Dcsdpfxjy Hm E Hj Ailjn ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane are carried out according to the technical regulations and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating manual, maintenance manual and crane inspection certificate. Lighting: ? 2 x LED AS integrated in the front wall ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on the left and one on the right, arrangement to be agreed upon. ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available upon request.

Condition: ready for operation (used), Siemens carbon brush holder for 1HU3074-0AC01 servo motor with terminal box, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dsdpfx Aiozf T D Dslecn

Condition: ready for operation (used), Brother control panel for Brother TC-225 machine, with 2 keys, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dcsdpez Dnx Rsfx Ailsn

Condition: used, mileage: 1,001 km, first registration: 01/2000, color: grey, driver cabin: other, gearing type: other, loading space length: 3,700 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2000, Vehicle location: Bovenden, Doors Dcodoqzywmepfx Ailjn ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: ready for operation (used), KUKA rotor for 1FK7083-5AF81 motor, serial number: YFV950654075025, with 86 61111H39 Binder brake, used, in good condition, 100% functional, scope of supply as shown in the photos. Dcodpfx Aozc Tv Nsilon

Condition: ready for operation (used), Kuka rotor for 1FK7105-54Y81 motor with Binder 86 6111HH12 brake, used, in good condition, 100% functional, scope of delivery as shown in the photos. Djdpozw Syhofx Ailocn

Condition: used, mileage: 1,001 km, first registration: 01/2008, color: silver, driver cabin: other, gearing type: other, Year of construction: 2008, Vehicle location: Bovenden, storage compartment Body: Platform body with storage compartments for Daimler-Benz Atego. Dismantling of a Daimler-Benz Atego 1018 AK 4x4 with a 3260 mm wheelbase! ACCESSORY INFORMATION IS WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Dcodpfx Aisi Rp Ngeljn

Condition: ready for operation (used), Fanuc carbon brush holder, likely A06B-0651-B012, for motor with carbon brushes, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dsdpfx Aiez D Rm Rslscn

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel with sliding mechanism and self-lubricating (Type Jost JSK), mounted on the auxiliary frame ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Dcodpfx Aisy Hm Etjlon Superstructure: Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel is then mounted on the chassis. The crane and superstructure, including the fifth wheel, can also be used together. The vehicle has a total of two fifth wheels, each of which can be moved longitudinally. A crawler would also be available, net price is €149,900. ? Mounting/bolting of the crane and main support beam to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed design as a removable steel/welded structure ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized version with steps, removable Kinngripp stanchions. ? Standard flatbed floor with welded 4 mm steel diamond plate, painted in RAL (chassis color) ? 6 recessed lashing eyes 2500 daN each side, in slot profile with flexible arrangement. ? 4 lashing brackets for chains 6500 daN (2 at the front and 2 at the rear of the superstructure) ? Sturdy front panel consisting of a welded frame, welded 4 mm steel sheet and 5 accessory hooks, front panel height approx. 1300 mm, steel version painted, with 2 foldable loops for lashing straps, welded. ? Sheathing panels, mudguards made of aluminum diamond plate (sandblasted, powder-coated and painted) ? Multifix stanchion pockets, 2 rows, spaced approx. 80 cm from the front and rear. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection at the rear and the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow couplings, at the front for semi-trailers and at the rear for trailers ? New crane, type FASSI F545 RA 2.27 endlessly rotating, fully mounted, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI crane manufacturer. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating instructions, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front panel ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on each side, arrangement to be agreed. ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available on request.

Condition: ready for operation (used), Siemens SIM encoder, communication with connecting cable for encoder, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dcjdpfszzhuiox Ailon

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, Saddle, and Haulage Company Fine-grained steel welded construction in lightweight design, saddle plate with interchangeable 2 kingpins, main frame reinforcement for 25 tons, with center of gravity at 3 m load length in the retracted state. 13 pairs of hooks for securing lashing straps, welded onto the crossbeams 23 pairs of lashing eyes recessed into the outer frame, each 3.5 tons Outer frame with Load-Lock profile for attaching lashing straps Note! Not usable with sideboards! 24 tons, 2-speed support winch in reinforced design for loaded coupling/uncoupling, single-sided operation Chocks with holder Aluminum side impact protection Under-run protection Half-shell fenders with anti-splash flaps according to EC 1 spare wheel holder for 1 tire, with wheel fastening kit 1 closed storage box for stakes, open at the top, below the loading area, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 6 pairs of pull-out stake pockets, for rectangular section stakes 80x80 mm, extendable from loading width of 2000 mm to 3100 mm 4 pairs of stake pockets recessed into the outer frame, for rectangular section stakes 80x80 mm 11 stake pockets recessed in the center of the floor, for rectangular section stakes 80x80 mm, with reinforcement beam, installed between the outer stake pockets 5 x 3 pairs of stake pockets recessed into the outer longitudinal beams, for rectangular section stakes 80x80 mm, including reinforcement beams - for load securing to the front and rear during the transport of reinforcing steel mats, 2x5000 mm or 2x 6000 mm 6 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with rope guide at the top for strap tensioning Dcjdpfxji Ri Szj Ailen 12 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: Stake pockets/plug-in stakes are not designed for the sole securing of long materials, pipes, etc. without strapping. 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 steel winches with wire rope and clevis hook, with rope guide through the outer frame, 1 removable gearhead for steel winch - supplied loose Telescoping Main frame telescoping extendable by a maximum of 4,000 mm and lockable every approx. 500 mm Locking with pneumatic pin locking + indicator for frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the control panel on the left side in front of the axles Storage compartment between the longitudinal beams in the extended state Axles + Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand knob, as well as manually via switch in the towing vehicle (Pin 10), without truck installation. Axle track offset mm Air suspension 1st axle automatic lift axle, additionally electrically operable from the truck, with starting aid Braking System 2-line compressed air braking system Colored line routing for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front EBS manufacturer according to the manufacturer's choice, electronic braking system with EBS

Condition: ready for operation (used), KUKA rotor for 1FK7103-5AZ91 with Binder 86 61111H60 brake, used, in good condition, 100% functional, scope of supply as shown in the photos. Dodpfx Aozxwc Deilscn

Condition: ready for operation (used), KUKA rotor for 1FK7103-5AF81 motor with Binder 86 61114H12 brake, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dodpfx Aijzx Nhljljcn

Condition: new, first registration: 07/2012, fuel type: diesel, color: red, driver cabin: other, gearing type: other, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,560 mm, Year of construction: 2012, Vehicle location: Bovenden, aluminum body, tarpaulin and spreader bars, lashing eyes. Body: flatbed / tarpaulin, LIKE NEW! Like-new flatbed body from a trade show vehicle, suitable for a frame track of 834 mm, high-strength subframe with a height of 300 mm, crossmember spacing of 375 mm, enclosed with a flatbed outer frame all around, foldable lashing rings with a load capacity of 2500 daN, certified according to DIN 12640, embedded and welded into the outer frame at a spacing of 400 mm. Side board height 600 mm, front wall height 2000 mm, 30 mm thick screen-printed plywood floor, tarpaulin frame in 3 parts, clear side height approx. 2600 mm, 2 lifting points for forklifts in the substructure. Dismounted from a D-Benz Antos 2543L 6x2 with a wheelbase of 4000 mm. Dcsdpfx Aioi Rnq Aelen New price approx. 16,000 EUR! Also available: 30 more interchangeable bodies for 1,000 to 5,900 EUR! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: ready for operation (used), Indramat housing with fan for 2AD 132B-B35RB1-BS03-A2N1 motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Djdpszv Hl Ajfx Ailocn

Condition: excellent (used), Buderus GE615 /820Kw boiler with Weishaupt burner Dcodoq Am Ivopfx Ailon