Second-hand machinery for sale (200,000)

Condition: used, Electric chain hoist, electric hoist, crane GIS type 150 / F serial no.: 1502802 year of construction 1981 lifting capacity 1500 kg Hsdjgi E Evepfx Ag Isnl hook path 4 meters Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. - Electric trolley with one speed for double T-beam - 2 load lines good condition

Condition: used, Electric chain hoist, crane, hoisting unit KONECRANES type XN 20 1608 B2 Serial no.: 1016304318 Year of manufacture: 2010 Hnedpfxew Nklno Ag Iel Lifting capacity: 1600 kg Hook travel: 9 metres Main lifting speed: approx. 8 m/min Fine lifting speed: approx. 2 m/min Chain size: 11.3 x 31 DAT Main hoist motor power: 3.5 kW Fine hoist motor power: 0.86 kW Power supply: 400 V, 50 Hz - 1 load strand

Condition: used, Vertical milling head, milling head with motor drive THIEL Hjdpfxoxddwro Ag Isnl Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Hnsdpfsu D Tz Uox Ag Iol Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Machine no. No. 1116 145 220 Year of construction 1994 Sawing range at 90° round 210 mm flat 240 x 190 mm square 210 x 210 mm at 45° round 150 mm Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Material support height 500 mm Motor power 0.5 / 0.75 kW Mains connection 400 Volt, 50 Hz - Drive motor with 2 speeds - Coolant pump in the machine base frame Space requirement L x W x H 1200 x 500 x 1200 mm Hnedpfx Asuqgbtjg Isl Weight 170 kg Good condition

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Hnedjwbi Rbopfx Ag Isl Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: used, Hydraulic unit, whisper unit BOSCH REXROTH Hydraulic unit Type UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Factory no. R904100893 / 480933 10 Year of manufacture approx. 2010 Pressure output: 55 bar Delivery rate: 13 L/min. Tank capacity: approx. 20 liters Engine power: 1.5 kW Speed: 1440 rpm. Mains connection: 400 volts, 50 Hz - Unit was used for an operating pressure of approx. 80 bar - 1 hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, pressure max. 100 bar - 1 air-oil cooler, fan cooling by electric motor from the hydraulic pump - Hydraulic block BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13 - 2 hydraulic pressure accumulators - 1 replaceable filter cartridge - 1 pressure sensor IFM, type TR7 430 - 1 oil sight glass - Hydraulic connections 2x 18L - Sold without oil content Space requirement L x W x H: 700 x 450 x 850 mm Weight: 105 kg very good condition Hnjdpfov Ev Dqox Ag Iol

Condition: used, Column Drilling Machine INFRATIREA - ORADEA Type PH - 031 Serial No. Year of manufacture 1975 Drilling capacity 40 mm Spindle taper MK 4 - short quill Throat depth 320 mm Quill stroke 250 mm Table size 400 x 400 mm Column diameter 160 mm Spindle speed 85 - 1500 rpm, 6-speed gearbox Motor power 2.2 kW Power supply 400 Volt, 50 Hz - Spindle speed adjustable over 6 gear steps - Right and left-hand rotation - Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/rev - Swivel drill table - Table height adjustment via hand crank - Clamping surface on machine base - Coolant pump integrated in base Required space L x W x H 1000 x 600 x 2450 mm Weight 700 kg Hjdpfx Astrpifjg Ijnl

Condition: used, Welding turntable ESS type DT 50 No. 86 / 1125 Year of construction 1986 max. load 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm Control voltage 24 Volt Motor power 100 watts Mains connection 220 Volt, 50 Hz. - Faceplate can be swiveled continuously through 180° in position - Speed control via rotary potentiometer - Clockwise/anticlockwise rotation - Foot switch - 2-stroke and 4-stroke operation - Sliding contact for ground up to 200 Amp. - New ESS PS3 control system from 2009 Hjdporwq Urjfx Ag Ienl Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition

Condition: used, Welding edge former INDUMASCH SIEGEN type V 12 Machine. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45° Working speed approx. 3 m/min. Motor power 2 kW Mains connection 400 Volt, 50 Hz - Forward / return - Built-in guide roller for 45° bevel angle - Belt guard missing Hoderz Tupspfx Ag Ienl Dimensions L x W x H 650 x 600 x 650 mm weight 75 kg good condition

Condition: used, Straightening and welding plate, cast steel and gray cast iron, heavily ribbed Cast plate, heavy straightening plate Length 1500 mm Width 1000 mm Thickness 100 mm Hnsdpfx Agjrl U Swo Isl Continuous plate thickness approx. 37 mm Table height 860 mm - Table base made of steel (custom-made) Weight 640 kg Good condition

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Hsdpfxoptlblj Ag Isnl Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 with impeller for crane rail 2 pieces available, price per piece

Condition: used, Steel Bench Grinder, Steel Grinding Machine ULRICH KLINGEL Type HSM 4 Year of manufacture: approx. 1976 with 4 workstations Grinding wheel diameter: 1x 100; 1x 150; 2x 200 mm Grinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kW Power supply: 380 Volt, 50 Hz - 3x oscillating grinding tables Hnjdjdz Srkepfx Ag Iol - all 3 workstations with swiveling tables, feed adjustment via handwheel - one workstation (the 4th) with a swiveling and tilting table, feed adjustment via handwheel - 1 diamond grinding wheel Ø 100 mm mounted (heavily worn) - 2 corundum grinding wheels Ø 200 mm mounted - Forward and reverse running at each station - Coolant system integrated in the machine base Required space (L x W x H): 1100 x 1000 x 1300 mm Weight: approx. 450 kg good condition

Condition: excellent (used), Kuper FWM 630 in excellent condition Hodpfx Aoy Swpmeg Ienl

Condition: excellent (used), Professional industrial chamfering and deburring bench machine from the renowned German manufacturer deNegro, in cooperation with Hahn & Kolb Stuttgart. This device is designed for chamfering, deburring, and edge processing of metal parts. The robust, heavy-duty workshop construction ensures stable and precise operation. The machine features an adjustable guide and a two-speed rotational switch. It is an ideal solution for locksmith workshops, toolrooms, and production environments. Condition: Used. The machine is in good working order and shows normal signs of use as visible in the photos. Technical specifications: Hnodpfxsy Swlhe Ag Iol Manufacturer: deNegro Distributor: Hahn & Kolb Stuttgart Model: DK 40-42 Power supply: 380V Power: 0.26 / 0.37 kW Speed: 1,400 / 2,800 rpm Frequency: 50 Hz Protection class: IP54 2-speed switch Adjustable guide Stable steel worktop 16A industrial power plug Applications: - Chamfering edges - Deburring metal parts - Machining steel components - Locksmith workshops - Toolrooms - Production and maintenance

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,438 h, load capacity: 3,500 kg, lifting height: 6,640 mm, free lift: 2,150 mm, fuel type: electric, construction height: 2,950 mm, battery capacity: 775 Ah, remaining battery capacity: 92 %, battery voltage: 80 V, DGUV certified until: 05/2026, fork length: 1,500 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-35 Electric Forklift with the following specifications: Operating hours: 3,438 Lifting capacity: 3,500 kg Lifting height: 6,650 mm Hnsdpfx Aoy Swmxjg Ijl Overall height: 2,925 mm Year of manufacture: 2019 STILL 3.5 ton electric forklift with full cab and heating, low hours, battery from 2023 at 92%, very good front tires, new rear tires, triplex mast with full free lift, fork positioner with sideshift, single-pedal control, joystick 4+, road-legal lighting (StVZO compliant), fork length 1,500 mm, battery charger included. The following options / retrofits are available on request (price on inquiry): - Two-pedal control instead of single-pedal - Different fork length Ex works price, including 1,000-hour service according to STILL manufacturer's specifications and valid UVV inspection. Inspection, demonstration, and test drive available by appointment by phone. Sale to businesses only; subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own low-loader trailer (transport costs on request). Further information and more offers can be found on our website!

Condition: good (used), Year of construction: 2006, Complete Ermont asphalt mixing plant Hedpfxoxuwuro Ag Ionl AE feeders: 2005 Ermont drum: 2006 ERMIS control station: 2011 Capacity: 170 tonnes/hour

Condition: good (used), 2 stainless steel emulsion tanks, each with a capacity of 40 m³ for asphalt mixes, suitable for use with emulsion or bitumen Hedoxy Ivqopfx Ag Ionl Diameter: 3.15 m Length: 12.40 m

Condition: used, 4 pieces of container wheels for ISO containers, container chassis Container castors, set of wheels for sea containers Hsdpfxsxp R Hdo Ag Ienl Manufacturer: presumably HAACON Total load capacity: approx. 24 tonnes Load capacity per piece: approx. 6 tonnes Wheel diameter: 360 mm Individual wheel width: 100 mm Total wheel width: 220 mm Height with container mount / clearance height: 540 mm Height to container support: 520 mm - Container locking mechanism for securing on the container corners - WICKE heavy-duty castors, heavy-duty cast rim with polyurethane coating, type 315/160 - Chassis steerable, can be locked with pin in 90° holes - 2 wheels per chassis - Ideally suited for moving containers on solid surfaces (e.g. factory floors) - without brake - without steering bar Weight per piece: 115 kg Total weight (4 pieces): 460 kg Very good condition

Condition: used, Conveyor belt, belt conveyor, belt conveyor, belt conveyor MFP Fördertechnik Machine No: 20083 Year of manufacture: 2021 Usable length: 2800 mm Belt width: 360 mm Usable width: 300 mm Belt length: approx. 5800 mm Frame profile construction height: 70 mm Deflection roller diameter: 20 mm Hedpfowqg Enjx Ag Isnl Belt speed: 10 m/min to 48 m/min Conveyor belt height: approx. 1150 mm Motor power: 140 Watt Power supply: 230 Volt, 50 Hz - Stepless belt speed via potentiometer on ROFRE frequency converter, type 897 - Right-left run - Belt drive via INTERROLL tube motor - Stable steel sheet construction with closed steel plate under the conveyor belt - 1 piece height-adjustable substructure with hand crank, conveyor belt height approx. 1000 to 1200 mm - Substructure mounted on steel plate length 500 mm x width 500 mm x thickness 30 mm - 1 piece fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 2880 x 500 x 1150 mm Weight: 200 kg good condition

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Hnsdpfouzn Nnox Ag Iel Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Conveyor belt, trough belt conveyor, trough conveyor, presumably GASUS type FB 400 x 5500 Belt conveyor, transport belt, belt conveyor Factory number: F Year of manufacture: 1996 Useful length: 5.5 meters Belt width: 400 mm Hnodpfx Agshz U Azj Isl Return roller diameter: 225 mm Return roller width: 450 mm Belt speed: approx. 30 meters/min Motor power: 1.5 kW Mains connection: 400 Volt, 50 Hz - Driven by tube motor - Infeed hopper 600 x 400 mm - The idler stations are two-part, troughed - Metal carrying rollers with maintenance-free ball bearings - Belt tension adjustable via threaded spindles - Smooth rubber conveyor belt - Sturdy tubular steel frame - Removable cover plate above the belt - For horizontal or slightly inclined transport of bulk materials Overall dimensions L x W x H: 6400 x 850 x 950 mm Weight: approx. 700 kg Good condition

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale Hnodped E A I Nefx Ag Iel - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, 3D Coordinate Measuring Machine ZEISS NUMEREX - Not Functional Hnjdpfx Agsfy U Ewo Iol Granite Measuring Table, Granite Surface Plate, Measuring Table Model No. 3648-18, Serial No. X-1019, Year of Manufacture approx. 1986 Measuring Range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring Plate L x W 1525 x 1435 mm Usable Surface 1525 x 1100 mm Plate Thickness 305 mm Clearance Width in the Portal 1100 mm Probe Mount Ø 9.5 mm Compressed Air Connection 6 bar Power Supply 230 Volt, 50 Hz - Granite plate with steel inserts with internal threads - Axis adjustment with pneumatic slide guide for X, Y, and Z axis - Plate mounted on base frame with 5 leveling feet, 3 support plates for the feet - Computer and software missing (not available and not included) → not functional! Space required for the measuring machine L x W x H 1600 x 1850 x 2200 mm Machine weight approx. 2.8 tons Plate is damaged on one side – see photo, otherwise in good condition

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 Hnsdped N H A Nsfx Ag Isl saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition