Second-hand machinery for sale (200,000)

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 572 mm, spindle motor power: 22,400 W, overall weight: 5,580 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis HAAS ST-25Y was manufactured in 2022. It features a maximum cutting diameter of 11.75 in and a maximum cutting length of 22.5 in. The machine is equipped with a 10 in chuck size and a robust spindle speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y horizontal turning machine we have for sale. Contact us for further details. • Working hours: 0 (showroom machine) • Chuck size: 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 11.75 in / 298 mm • Max cutting length: 22.5 in / 572 mm • Bar capacity: 3.00 in / 76 mm • Rapids (X / Y / Z): 472 ipm (12.0 m/min) / 472 ipm (12.0 m/min) / 945 ipm (24.0 m/min) • Max thrust (X / Y / Z): 4100 lbf (18238 N) / 2300 lbf (10231 N) / 5100 lbf (22686 N) • Spindle nose: A2-6 • Max spindle torque: 300.0 ft-lbf @ 500 rpm / 407.0 Nm @ 500 rpm • Spindle bore diameter: 3.50 in / 88.9 mm • Main spindle C axis max rating: 5.0 hp / 3.7 kW • Main spindle C axis max speed: 60 rpm • Main spindle C axis positioning: ± 0.01° • Main spindle C axis brake diameter: 13.9 in / 353 mm • Main spindle C axis brake holding torque: 250 ft-lbf / 339 Nm • Sub-spindle chuck size: 5.3 in / 135 mm • Sub-spindle nose: A2-5 • Sub-spindle max speed: 6000 rpm • Sub-spindle max sync speed with main spindle: 3400 rpm • Sub-spindle chuck throat: Ø 1.30 in x 1.37 in deep / Ø 33.0 mm x 34.8 mm deep • Sub-spindle drawbar bore (non-through): Ø 1.00 in x 4.50 in deep / Ø 25.4 mm x 114.3 mm deep • Sub-spindle bore (without chuck and drawbar): 1.50 in / 38.1 mm • Sub-spindle integrated brake torque: 17 ft-lbf / 23 N·m • Sub-spindle orientation accuracy: ± 0.02° • Sub-spindle rapids (B-axis): 400 ipm / 10 m/min • OD vs ID tools: Any combination • Boring bar rear clearance: 4.00 in / 102.0 mm • Live tooling max speed: 4000 rpm • Live tooling interface: BMT65 • Coolant capacity: 55 gal / 208 L • Air requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline air hose and coupler: 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Drive system: Direct speed, belt drive • Electrical requirements: Low 220 VAC @ 70 A / High 440 VAC @ 35 A (3 Phase) • Shipping dimensions (domestic): 142.0 in x 90.0 in x 92.0 in / 361 cm x 229 cm x 234 cm Technical Specification Driven Tools Yes Dsdoz N Dmvopfx Al Aswc Counter Spindle Yes

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Djdpoz N Dpkjfx Al Aowc

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 330 mm, number of axes: 2, Horizontal turning machine manufactured in 2011. This Mazak Quick Turn Smart 100 S (QTS 100 S) features a maximum turning diameter of approximately 280 mm and a turning length of about 308 mm. It includes a 12-position drum turret for efficient tool changes and a programmable tailstock. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 100 S machine we have for sale. Contact us for further details. MAZAK Quick Turn Smart 100 S (2011) - INFO- Main Spindle C-Axis: Without C-axis - Control: Mazatrol Smart (10.4" Color LCD) - Operating Hours: 44,137 hours - Turning Length: approx. 308 mm (Z-travel approx. 340 mm) - Turning Diameter: max. approx. 280 mm - Swing Diameter: approx. 584 mm - Turret: 1 Turret, 12-position drum turret (Bolt-on type), index time 0.17 s - Tool Holder: Mazak block holder (Bolt-on), various tool adapters / tool holders included - B-Axis (stepless 0.001°): No - Tailstock: Yes, programmable tailstock (centering point MT 4) - Main Spindle Speed: 6,000 rpm (Spindle nose A2-5, drive approx. 11 / 7.5 kW) - Bar Loader: No (Defective) - Bar Capacity / Passage: Ø 42 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included) Various tool adapters, tool holders, clamping devices, and set of collets Dedpfxjz N Hdwo Al Aswc - Chip Conveyor: No Technical Specification Counter Spindle No Driven Tools No

Condition: used, D+P Dosing and Testing Technology 05-755-011, used industrial spare part Used industrial spare part from Dosing and Testing Technology GmbH. Manufacturer: Dosing and Testing Technology GmbH Part number: 05-755-011 Dwjdsz N Hgxjpfx Al Asc Condition: Used Quantity: 3

Condition: used, D+P FLC300.3-D+P Industrial Electronics, Used Used industrial component from Dosier- und Prüftechnik GmbH, model FLC300.3-D+P. Manufacturer: Dosier- und Prüftechnik GmbH Dsdpfx Aloz N Hhps Aowc Model: FLC300.3-D+P Condition: Used Operating voltage: 24 V DC Function: Control, monitoring, and testing technology for industrial applications Quantity: 2

Condition: used, Year of construction: 2003, operating hours: 4,570 h, power: 41 kW (55.74 HP), load capacity: 230 kg, mast type: telescopic, lifting height: 17,000 mm, fuel type: diesel, color: red, Equipment: all wheel drive, Empty weight: 12.880 kg Djdpfx Aoz N Hhvjl Aowc GVW: 13.112 kg Dimensions (LxBxH): 940 x 240 x 270 cm Availability: in stock

Condition: used, Year of construction: 2002, operating hours: 5,290 h, load capacity: 230 kg, mast type: telescopic, color: blue, Equipment: all wheel drive, Empty weight: 12.880 kg Dwedpfoz N Hh Aex Al Aec GVW: 13.112 kg Dimensions (LxBxH): 940 x 240 x 270 cm Working height: 2.200 cm Availability: in stock

Condition: excellent (used), CATALOGUE NUMBER 7680 TECHNICAL SPECIFICATIONS - max. blade diameter 500mm - spindle diameter 30mm - hydraulic blade stroke - max. cutting width 500mm - max. cutting height (in the centre, with a 500mm blade) 160mm - main motor 4kW - table dimensions 715x1070mm - table height from the base 790mm - 2 roller tables - table dimensions: - infeed table length/width 2000x640mm Dsdjztapiepfx Al Aswc - outfeed table length/width 2000x640mm - machine dimensions length/width/height 1400x940x1070mm - total weight 480kg ADVANTAGES – 2 roller tables – hydraulic blade stroke – used saw, very good condition Net price: 15900 PLN Net price: 3700 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg Dwodpfx Ajz N Hxhol Aoc range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Pressurized water temperature control unit, circulating process temperature control, heater, cooler, electric heating. SINGLE type STW 180/1-36-100-S Mfg. No.: 130568 Year of manufacture: 2013 Temperature max. 180°C Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal volume) Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Circulating water supply + return DN 32 - G 1 1/4" Cooling water supply DN 20 G 3/4" Cooling water return DN 20 G 3/4" Connection power 41 kVA Rated current 57 A Control system SC Standard type R8200-S-1-SI1-0-6 Dsdpfoz N H D Dox Al Ajwc Mains connection 400 Volt, 50 Hz. - Temperature control - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Weight 200 kg Good condition

Condition: used, Year of construction: 2008, overall weight: 190 kg, hopper volume: 7 l, terms of delivery: FCA Pegnitz Dodpfxsz N Igmo Al Aswc delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, Max. Tragkraft: 6000 kg Max. Reichweite: 21.70 m Aufwärtsneigewinkel: a4 12 ° Abwärtsneigewinkel: a5 110 ° Drehung des Oberwagens: 360 ° Antriebsräder (vorne / hinten): 2 / 2 Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang Typ Abstützung: Abstützung Teleskop Duplex Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig Anzahl Batterien / Batterie: 2 x 12 V 12V Batteriekapazität 120 Ah Anlaufstrom der Batterien (EN)850 A Batterietechnologie Lithium-ion Batteriekapazität 105 Ah Nennspannung der Batterie 624 V Maximale Spannung der Batterie 680 V Batterieenergie 65 kW/h Nennleistung des Elektromotors 107 kW Hydraulische-Motorleistung 84 kW Ladegerät Leistung / Phase / Stromtyp 11 kW / Single-phase or three-phase / AC Getriebetyp elektrisch Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 Max. Fahrgeschwindigkeit 37 km/h Zugkraft 8600 daN Djdpjz N Imyefx Al Aewc Kontinuierliche Zugkraft 4300 daN Parkbremse Automatische negative Parkbremse Festellbremse Ölbad Lamellenbremsen an den Vorder- und Max. Steigfähigkeit - beladen / unbeladen 36 % / 48 % Kontinuierlich überwindbare Steigung (beladen / unbeladen) 18 % / 23 % Hydraulisch Typ Hydraulikpumpe Zahnradpumpe Hydraulikfördermenge 175 l/min Hydraulikfördermenge – Hydraulikdruck 350 bar Fassungsvermögen des Hydrauliktanks 200 l Geräuschpegel im Fahrerstand (LpA) 65 dB Umgebungsgeräusch (LwA) 103 dB Schwingungsbelastung Hand/Arm < 2.50 m/s² Lenkräder (vorne / hinten) 2 / 2 Steuerungen 2 Joysticks Kabinen-Zertifizierung Kabine ROPS - FOPS Stufe 2 Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, Rotating forklift Manitou MRT 3060 Dsdpfx Ajz N In Dol Aowc Drive Diesel Year built 2026 Lifting height (mm) 29,900 Lifting weight (kg) 6,000

Condition: used, total length: 6,650 mm, Year of construction: 2020, load capacity: 11,000 kg, - Wenderadius: 3.610 mm - Auslegerwinkel: -10° bis 60° - Rahmen: Konstruiert und gebaut von JMG. Das Gehäuse ist stabil gegenüber. Torsion auf Grund des verwendeten, hochfesten Stahls. - Antrieb: elektrisch, batteriebetrieben - Getriebe: Vorderachsantrieb mit Vorgelege - Ausleger: Gefertigt aus Formteilen und verschweißten Qualitätsstahlplatten. Hydraulisches Grund- und zwei teleskopierbare, proportional ausfahrende Mastelement Dwedpfoz N In Rsx Al Asc - Bremsen: Betriebsbremse: über hydraulisches Pedal betätigt. Feststell- und Notfallbremse: hydraulisch mit automatischer Steuerung - Lenkung: über das Hinterrad, mit von der Kranhydraulik versorgten Motor mit Servolenkung und Lastfühler - Hydraulikanlage: - Angetrieben durch Zahnradpumpe - Hydraulikbedienung über elektro-proportionalen Verteiler, betätigt durch einen Joystick - Filter und - Sicherheitsventile - Maximaler Betriebsdruck 220 bar - Sicherheitseinrichtungen: elektronische Lastbegrenzung - Fahrerkabine - Arbeitsscheinwerfer - Warnlicht - Feuerlöscher - Sicherheitsabschalter

Condition: used, functionality: fully functional, Year of construction: 2020, overall weight: 800 kg, total height: 1,420 mm, total length: 2,130 mm, total width: 1,150 mm, load capacity: 16,000 kg, coilDorn Producing company Hanselmann Dsdoz N Ipnopfx Al Ajwc Type 147311 Year built 2020 Height (mm) 1,420 Length (mm) 2,130 Lifting weight (kg) 16,000 Weight (kg) 800 Width (mm) 1,150

Condition: used, machine/vehicle number: K12805, Rotor diameter: 260 mm Rotor width: 410 mm Rotor blades: 5 rows Stator blades: 2 rows Dwsdpfx Aez N Iymjl Aec Infeed cross-section: approx. 2 pieces, 10 x 120 mm Drive motor: 11 kW Mechanical infeed device for film edge strips

Condition: used, Used Siemens SIMATIC pneumatic interface EM 148-P for controlling a Festo CPV-14 valve manifold within the decentralized peripheral system ET 200X. Manufacturer: Siemens Series: SIMATIC DP / ET 200X Model: EM 148-P Article number: 6ES7148-1EH11-0XA0 Device type: Pneumatic interface Digital outputs: 16 DO Pneumatic Valve manifold connection: Festo CPV-14 Djdpoz N Hk Refx Al Aewc Power dissipation: Typical 9 W Operating pressure: 3–8 bar Condition: Used Quantity: 1

Condition: used, Siemens MOBY ASM 450 PROFIBUS DP Connection Module 6GT2002-0EB00, used Used Siemens MOBY connection module ASM 450 for connecting industrial identification systems to PROFIBUS DP. Manufacturer: Siemens Series: MOBY Model: ASM 450 Article number: 6GT2002-0EB00 Device type: Connection module / Interface module Communication interface: PROFIBUS DP Supply voltage: 24 V DC Digital inputs: 2 Digital outputs: 2 Dimensions: 134 × 110 × 55 mm Condition: Used Dedpfx Asz N Hlbel Aswc Quantity: 2

Condition: used, Siemens MOBY I Read Head 6GT2003-1CA00 for Handheld Terminal STG I, used Used Siemens MOBY I read head for the mobile handheld terminal STG I, designed for industrial identification. Manufacturer: Siemens Model Series: MOBY I Djdpez N Hniofx Al Aowc Article Number: 6GT2003-1CA00 Device Type: RFID Read Head Application: Handheld Terminal STG I Frequencies: 134 kHz / 1.81 MHz

Condition: excellent (used), Year of construction: 2004, Control system: Heidenhain iTNC530 X-axis: 1,050 mm Y-axis: 800 mm Z-axis: 560 mm C-axis: 360° B-axis: 10°/+110° Spindle speed: max. 18,000 min⁻¹ Drive power: 35 kW Max. torque: 80 Nm Tool interface: HSK-A63 Dwodpfoz N A Nvex Al Aoc Feed rate (X / Y / Z): max. 90,000 mm/min Rated power: 80 kVA Rated current: 115 A Voltage: 400 V Frequency: 50 Hz Coolant tank with 1000 liters Tool changer with 32 positions with internal cooling at 40 bar (IKZ) with chip conveyor, scraper belt Weight: 12,200 kg Transport dimensions: 4,100 x 2,900 x 3,500 mm Machine available at the current location without disassembly. Disassembly must be arranged by the buyer. The machine is being sold on behalf of the customer.

Condition: ready for operation (used), Year of construction: 1992, operating hours: 60,000 h, spindle speed (max.): 3,000 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: Series 15 T, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 1992. This Monforts RNC 5 features a maximum turning diameter of 340 mm and a turning length of 1000 mm. It is equipped with a control system from Fanuc Series 15 T and offers 12 tool positions for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 5 machine we have for sale. Contact us for further details. - Typical Workpiece Materials: Case-hardening steel - Typical Workpiece Components: Shafts, gears - Production Environment: Single parts and small series- Max. Swing Diameter over Bed: 600 mm- Swing Diameter over Bed Slide: 450 mm- Max. Turning Diameter: 340 mm- Max. Turning Length: 1000 mm- Turning Diameter Range: 50 - 250 mm- Number of Tool Positions: 12 tools- Driven Tools Power: 4.5 kW- Driven Tools Speed: 3000 rpm- Counter Spindle: No (Single main spindle machine)- Material Clearance / Spindle Bore: 85 mm- Bar Capacity Max.: 78 mm- Chuck Work Max Weight: 25 kg- Center Work Max Weight: 35 kg Dwodpfjz N Hbcox Al Ajc Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: – from above: rubber roller, pressure roller, knurled Djdpszrnwljfx Al Ajwc 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of the units 15 kW – from below: 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm Dwsdpfezruu Dex Al Aoc - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed drive rollers, top and bottom, 2 x 2.2kW - Electric automatic reversing system - Reverse gear - Belt conveyor - Conveyor length: 5100mm - Belt width: 400mm - Main motor: 30kW - Shredder dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight: approximately 3000kg - With belt conveyor - Electric automatic reversing system (with adjustable settings) - Reverse gear - Used shredder, very good condition Net price: 68900 PLN Net price: 16023 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Year of construction: 2012, condition: used, Three-story, modular container system manufactured by PLATAL Mobilsysteme GmbH in 2012, previously used as a school building with classrooms, ancillary rooms, and sanitary facilities. Manufacturer: PLATAL Mobilsysteme GmbH Year of manufacture: 2012 Construction: Modular container system Previous use: School and sanitary facilities Overall dimensions (L × W × H): approx. 36,000 × 15,760 × 10,200 mm Floors: 3, identical in construction Total number of container modules: 72 units Dwodpfxoz N Ex To Al Aec Container module type 1: 36 units, each 3,000 × 6,500 mm Container module type 2: 36 units, each 3,000 × 9,260 mm Module height: 3,400 mm Sanitary areas: 3, one per floor Exterior staircases: 2 steel exterior staircases with grating steps and landings Equipment: Windows with exterior roller blinds, radiators, suspended grid ceilings, lighting, electrical installations, and sanitary areas Room layout: Classrooms, corridors, ancillary rooms, and sanitary areas

Condition: excellent (used), Year of construction: 2001, Steady rest in good condition, today's new price 55.000,- EUR span range max.: 400 mm span range min.: 50mm Dwedpfez N Ez Ijx Al Aec steady rest width: 170 mm steady rest height: 730 mm